Hey Jesse, what's up with the Jags? I'm almost done rebuilding my XJ40, after I hit a deer on the highway.
@XJJesse3 сағат бұрын
Hey Alexandre The Jags have been driving great! The Series 3 needs the AC fixed, and the XJR6 could use a paint job and a new windshield. Glad to hear you're almost done with your XJ40 and didn’t give up on it. Hitting a deer must have been crazy ! Hope your okay
@alexandrecouture24622 сағат бұрын
@@XJJesse Thank you! I'm all fine, but it did broke the bonnet, a rectangle light, the grille and the right fender. I got parts from the junkyard and painted it myself. With good quality 2k clear coat, I'm sure your bonnet would look amazing, as mine did!
@ralphmenta79973 сағат бұрын
That tach seen better days.....
@user-tg7ox5eb3m5 сағат бұрын
Ah I know the problem, it’s a ford! There I fixed it
@lukeWiz444 сағат бұрын
I’d be happy to trash your brand of choice, which one is it?
@eriktinaj87414 сағат бұрын
Still made it to 200k miles tho didn’t it?
@johnbarrington54975 сағат бұрын
Bugs getting in those sensors is so common it's the first thing I check
@RobertAnthonyLima-ts8gd22 сағат бұрын
I now have my fathers 2004 Grand Marquis . Like new. Only 89k Garage kept. Engine taken care of extremely well . I absolutely love driving it. Although its a bit difficult when trying to park and judging. Lol
@user-gb9ny1rq1xКүн бұрын
Hie, do you have video or guide on a Land Rover discovery sport 2015 diesel spark plug replacement? Or any advice?
@sebzhulk2997Күн бұрын
Ive done this , its fkkn stressful gacho i left tf like that ,😅😂
@dumbmonk80473 күн бұрын
One of my bolts just keeps spinning i give up
@liamtoman30703 күн бұрын
Bro diagnosed my problem and made me laugh 10/10 good shit homie
@Markjohnson-vw4en3 күн бұрын
Helpful video! Here's an important tip tho: there's an ACCESS PANEL behind the pass side wheel that makes it easier 2get2 the lower bolts (i have a '93 4.9; the 4.5 shld be similar). Remove the pulley bolts by jamming a screwdriver (etc) thru it to keep it from turning, then let it hang there. It will come off later when you unbolt the pump. This SHOULD eliminate the need to raise the engine but the 4.5 may be slightly different. Dont forget to transfer the pulley to the new pump BEFORE u rebolt that to the engine. The torx screws are no biggie; they're not on tight. Be careful with those 13 little screws (10mm) he mentions; they are ez to drop! Btw: after ur done, refill the coolant thru the thermostat housing, NOT the radiator cap; this prevents air binding. Good luck. Thx again guy for the video😊
@HemiMk3 күн бұрын
This absolutely just fixed my car! I was skeptical with the o rings looking fine, but it works great job and thank you! 🙏🏼
@ThePursuitofHappiness19884 күн бұрын
I’m guessing the process is identical for the Crown Victorias as well?
@FabioAmar1004 күн бұрын
I am 51 y.o. and have just concquered my 22 y.o.'s old dream: a XJ6 british racing green 1995. This Jag is my dream came true. It has some minor issues but I will surely improve them step by step. Loved your video, pal. Thanx. San José de Los Fields, Brasil.
@user-br6jv4mb7o5 күн бұрын
You only did the easy ones that you don't need to remove the fuel rail for.
@paulboudreau37545 күн бұрын
Hey Jesse, great video. I think I may have an intermittent bad switch like you showed in the video. Is it possible that there's a schrader valve under where it connects so you can replace it without removing the Freon? I saw a video for another vehicle where that is the case. I took a look at one for sale on ebay and it's hard to tell but it looked like there was a center pin on the switch to pust in the valve stem.
@BudsCartoon7 күн бұрын
Yea... doesn't work. Both? I gotta do both? Well I did do both, neither worked. Taking back my like.
@HustleNoHandOuts8 күн бұрын
Easy peasy 🏆💪🏽
@yotowrld71258 күн бұрын
A he wasn’t lying abt a kick😂😂 I hit it came right on💯
@shootemup2568 күн бұрын
Just knocked this out on my Vanden Big props to XJJ💯
@LowEnd31st8 күн бұрын
Fuel injectors likely bad. Popular back in the day was using 5.0 Mustang injectors.
@ellis28888 күн бұрын
Thank you for explaining everything i'm a rookie while dealing with cars but you made my life so simple. Subbed and liked
@ToyYoda98 күн бұрын
Thank you for posting really the only video that I could find on specifically the 1988-1994 XJ6 on where and how to change the fuel filter. 😆
@Santos-dw6wu9 күн бұрын
My car rn 💀 ( I drive a nissan 😞 )
@gregorycoleman97299 күн бұрын
Bruh🙌🏿, crazy this worked… the kicking portion…
@keithnewton898110 күн бұрын
My first car when I was 17 was a Daimler sovereign 4.2 . It was my dad old 1982 car. But as fuel prices increased in europe I only had it 2 years
@keithnewton898110 күн бұрын
In the uk the screws are always painted body colour from factory.
@keithnewton898110 күн бұрын
People in the uk and Europe don't understand why Americans say jaguars are difficult and have engine failures. We just don't have these issues. I can only assume we look after our cars better becsusd we have annual government inspection so cars have to be maintained or they will not pass inspection mot fail means cars cannot be driven until fixed and retested.
@tnh420311 күн бұрын
Bouta do this to mine
@travis30311 күн бұрын
I just got a 2000 Mercury Grand Marquis for a couple of reasons one of which being I have been seeing that that car is one of the easiest to keep running as most of the parts are out there easy to access. I'm not a mechanic at all but would like to learn and it seems this car is the easiest on which to learn. I stumbled onto your videos when looking at tutorials.
@codybrown653411 күн бұрын
If I'm hearing a squealing noise from the pulley. Only when I turn the AC on, would that mean a faulty pulley, bearing, or compressor? And is it possible to just replace the pulley without replacing the compressor?
@dakodajames453411 күн бұрын
Mine now drives really heavy like it has no power steering yet the fluid is full
@psd2811 күн бұрын
I cant get the caliper back on with the new pads
@kressano11 күн бұрын
It's a very long time i follow your channel only for the grand marquis. Your car is a masterpiece.
@guzforce11 күн бұрын
What are the links or part numbers for o-rings and tool?
@guzforce11 күн бұрын
My ac compressor is leaking a bit of oil. Can I just recharge with the gas cans and keep running till it breaks? Summer in Massachusetts is just a month.
@robertdonnelly47412 күн бұрын
Why did you use three O-rings was it because they were old and not big enough?
@efguy1112 күн бұрын
Can’t wait to see it lowered!
@gfy6912 күн бұрын
they turned out great, I want to stay with stock ride height tho even if I had torque wheels and I would just spend more on a larger tire.
@davidmckinney657712 күн бұрын
Those look great 👍 👌 Jesse u the man...Those grand marquis and crown victoria and towncars are bulletproof cars you can't wear them out only thing the newer ones have to have a new intake replaced but not a big deal. Stay cool 😎 bro it'd hotter hell here in the nineties and extreme humidity.
@noconsentgiven12 күн бұрын
Got that girl looking goood❤👍!!
@XJJesse12 күн бұрын
She’s sitting pretty 😊
@alexandrecouture246212 күн бұрын
Cool wheels! I think the ride height is fine, you can even do so off-road like that! :)
@XJJesse12 күн бұрын
Thanks! I'm glad you like the wheels. It would be fun taking it off Roading to some Hot Springs.
@alexandrecouture246212 күн бұрын
@@XJJesse Yes, enjoy the summer, time for some vacation! And don't hit a deer on the highway, as I did with my XJ40... Now I'm rebuilding its front-end.
@ndnmason12 күн бұрын
He'll yeah you got a good deal and so did he that's about what they go for on craigs list.
@stevekemble891112 күн бұрын
I like the look, but I want to stay factory. Perhaps there is a gap now because the tire is smaller than the original? I want to get a plain steel wheel at the junk yard to replace the damn donut tire that came with this thing! Donuts on the plate - not in the trunk. Tire 225/60R16 Rim 7Jx16 ET54 Offset Range 52 - 56 Center Bore / Hub Bore: 70.5 mm Bolt Pattern (PCD): 5x114.3 (5x4.5) Wheel Fasteners: Lug nuts 1/2-20 Thread, Conical 60, Standard, 0.625" Length, Zinc
Пікірлер
Tac working backasswards
Knew it was gonna be a bug in the maf lol
Dude what's up with the RPM gauge
Bruh needs to fix the rpm gauge haha
There’s a bug in the system
Its not a bug, its a feature!
Hey Jesse, what's up with the Jags? I'm almost done rebuilding my XJ40, after I hit a deer on the highway.
Hey Alexandre The Jags have been driving great! The Series 3 needs the AC fixed, and the XJR6 could use a paint job and a new windshield. Glad to hear you're almost done with your XJ40 and didn’t give up on it. Hitting a deer must have been crazy ! Hope your okay
@@XJJesse Thank you! I'm all fine, but it did broke the bonnet, a rectangle light, the grille and the right fender. I got parts from the junkyard and painted it myself. With good quality 2k clear coat, I'm sure your bonnet would look amazing, as mine did!
That tach seen better days.....
Ah I know the problem, it’s a ford! There I fixed it
I’d be happy to trash your brand of choice, which one is it?
Still made it to 200k miles tho didn’t it?
Bugs getting in those sensors is so common it's the first thing I check
I now have my fathers 2004 Grand Marquis . Like new. Only 89k Garage kept. Engine taken care of extremely well . I absolutely love driving it. Although its a bit difficult when trying to park and judging. Lol
Hie, do you have video or guide on a Land Rover discovery sport 2015 diesel spark plug replacement? Or any advice?
Ive done this , its fkkn stressful gacho i left tf like that ,😅😂
One of my bolts just keeps spinning i give up
Bro diagnosed my problem and made me laugh 10/10 good shit homie
Helpful video! Here's an important tip tho: there's an ACCESS PANEL behind the pass side wheel that makes it easier 2get2 the lower bolts (i have a '93 4.9; the 4.5 shld be similar). Remove the pulley bolts by jamming a screwdriver (etc) thru it to keep it from turning, then let it hang there. It will come off later when you unbolt the pump. This SHOULD eliminate the need to raise the engine but the 4.5 may be slightly different. Dont forget to transfer the pulley to the new pump BEFORE u rebolt that to the engine. The torx screws are no biggie; they're not on tight. Be careful with those 13 little screws (10mm) he mentions; they are ez to drop! Btw: after ur done, refill the coolant thru the thermostat housing, NOT the radiator cap; this prevents air binding. Good luck. Thx again guy for the video😊
This absolutely just fixed my car! I was skeptical with the o rings looking fine, but it works great job and thank you! 🙏🏼
I’m guessing the process is identical for the Crown Victorias as well?
I am 51 y.o. and have just concquered my 22 y.o.'s old dream: a XJ6 british racing green 1995. This Jag is my dream came true. It has some minor issues but I will surely improve them step by step. Loved your video, pal. Thanx. San José de Los Fields, Brasil.
You only did the easy ones that you don't need to remove the fuel rail for.
Hey Jesse, great video. I think I may have an intermittent bad switch like you showed in the video. Is it possible that there's a schrader valve under where it connects so you can replace it without removing the Freon? I saw a video for another vehicle where that is the case. I took a look at one for sale on ebay and it's hard to tell but it looked like there was a center pin on the switch to pust in the valve stem.
Yea... doesn't work. Both? I gotta do both? Well I did do both, neither worked. Taking back my like.
Easy peasy 🏆💪🏽
A he wasn’t lying abt a kick😂😂 I hit it came right on💯
Just knocked this out on my Vanden Big props to XJJ💯
Fuel injectors likely bad. Popular back in the day was using 5.0 Mustang injectors.
Thank you for explaining everything i'm a rookie while dealing with cars but you made my life so simple. Subbed and liked
Thank you for posting really the only video that I could find on specifically the 1988-1994 XJ6 on where and how to change the fuel filter. 😆
My car rn 💀 ( I drive a nissan 😞 )
Bruh🙌🏿, crazy this worked… the kicking portion…
My first car when I was 17 was a Daimler sovereign 4.2 . It was my dad old 1982 car. But as fuel prices increased in europe I only had it 2 years
In the uk the screws are always painted body colour from factory.
People in the uk and Europe don't understand why Americans say jaguars are difficult and have engine failures. We just don't have these issues. I can only assume we look after our cars better becsusd we have annual government inspection so cars have to be maintained or they will not pass inspection mot fail means cars cannot be driven until fixed and retested.
Bouta do this to mine
I just got a 2000 Mercury Grand Marquis for a couple of reasons one of which being I have been seeing that that car is one of the easiest to keep running as most of the parts are out there easy to access. I'm not a mechanic at all but would like to learn and it seems this car is the easiest on which to learn. I stumbled onto your videos when looking at tutorials.
If I'm hearing a squealing noise from the pulley. Only when I turn the AC on, would that mean a faulty pulley, bearing, or compressor? And is it possible to just replace the pulley without replacing the compressor?
Mine now drives really heavy like it has no power steering yet the fluid is full
I cant get the caliper back on with the new pads
It's a very long time i follow your channel only for the grand marquis. Your car is a masterpiece.
What are the links or part numbers for o-rings and tool?
My ac compressor is leaking a bit of oil. Can I just recharge with the gas cans and keep running till it breaks? Summer in Massachusetts is just a month.
Why did you use three O-rings was it because they were old and not big enough?
Can’t wait to see it lowered!
they turned out great, I want to stay with stock ride height tho even if I had torque wheels and I would just spend more on a larger tire.
Those look great 👍 👌 Jesse u the man...Those grand marquis and crown victoria and towncars are bulletproof cars you can't wear them out only thing the newer ones have to have a new intake replaced but not a big deal. Stay cool 😎 bro it'd hotter hell here in the nineties and extreme humidity.
Got that girl looking goood❤👍!!
She’s sitting pretty 😊
Cool wheels! I think the ride height is fine, you can even do so off-road like that! :)
Thanks! I'm glad you like the wheels. It would be fun taking it off Roading to some Hot Springs.
@@XJJesse Yes, enjoy the summer, time for some vacation! And don't hit a deer on the highway, as I did with my XJ40... Now I'm rebuilding its front-end.
He'll yeah you got a good deal and so did he that's about what they go for on craigs list.
I like the look, but I want to stay factory. Perhaps there is a gap now because the tire is smaller than the original? I want to get a plain steel wheel at the junk yard to replace the damn donut tire that came with this thing! Donuts on the plate - not in the trunk. Tire 225/60R16 Rim 7Jx16 ET54 Offset Range 52 - 56 Center Bore / Hub Bore: 70.5 mm Bolt Pattern (PCD): 5x114.3 (5x4.5) Wheel Fasteners: Lug nuts 1/2-20 Thread, Conical 60, Standard, 0.625" Length, Zinc
Looks good tho
Thanks a lot bro! Appreciate it.