*this a wonderful starter Metal Detector>>>**ur2.pl/1217** I gave this to my son last week. I now know where every stud and nail in the carpets are in our home :) It's been nasty cold in Ohio. Looking forward to hiking and exploring as it warms up. I am very tempted to purchase one for my self so we can "treasure" seek for fun.*
@300zxdriver5 жыл бұрын
It’s says it’s rated for 60 lbs
@smile74506 жыл бұрын
Hi can someone please tell me which mid range metal detector is best for gold nuggets?
@kaykay26986 жыл бұрын
Nice how much ?
@maddoxomeara5 жыл бұрын
Kay Kay 1,500$
@meeko90364 жыл бұрын
I have a Oset Mx 10
@maddoxomeara6 жыл бұрын
Poor bike
@janswhatsupdoc6 жыл бұрын
Wtf
@racoonman1007 жыл бұрын
Hey mate thanks for that I've just got a second hand Nel hunter coil for the at pro international
@amchomemaker7 жыл бұрын
I can't get mine to pick up coins any body know how to program it
@capie447 жыл бұрын
HA! "Dirt Fishin'"
@capie447 жыл бұрын
6:10My unit does the same thing. Does it get "confused" and read all types of coins?
@capie447 жыл бұрын
Hi, On your's and other reviews, I decided to start with the Delta 4000. I immediately assembled it and it reacted to EMF of the parking lights. I eliminated the iron, and it settled down, but not completely. It didn't stop chirping though when, at the empty acreage next to the store, I "gave it a go."Again, eliminated iron, it still chirped. My first find was a piece of tin :-D But it wouldn't stop chirping. I adjusted the settings, eliminated foil and below, and it still chirped. Later, I threw a penny on the ground, and the 4000 went nuts trying to decide if it was a penny, dime, or quarter (it FINALLY decided it wasn't a half-dollar. ) Then it ignored the find. Additionally, I discovered the "rocks" were actually crumbled cement with pencil-lead sized steel. So I moved half-an-acre away and that took care of that. But then natural (hand-held) rocks (stream pebbles/rocks) were sounding it off too. So I stuck with pennies, quarters and the pin-point wand I got with it. The damn thing registered a depth of 8 inches on a penny that was right there LOS. Then once it found it (and not deciding what it was) it just shut-up and repeatedly ignored the find; silence as I was waving right over the penny. I don't get it. The acreage didn't have any electronics around it and no cell-towers/powerlines were LOS. (Phone in pocket.) So what do I do to get the solid readings you get? Thank you, "It was my first time, but I don't feel like "rolling over and having a cigarette."
@seansmith1197 жыл бұрын
HI,IF USING 8"CONCENTRIC COIL,IVE FOUND IT DOSENT WORK WELL,I PUT THE EXACT SAME COIL THATS ON MY TEK PRO AND IT WORKS GREAT.BUT SWITCH TO A DD COIL IS MY ADVICE,OR SEND COIL BACK TO EL PASO? ATB GL HH
@daveujcic25158 жыл бұрын
Same down this way Melbourne Victoria, dry sand only detector. Unknown of any mods for Delta4000. My AtGold doesn't handle the wet sand either, however it does a little better than the 4000.
@crazykdetector27348 жыл бұрын
have you ever used it at the beach ? on dry and wet sand. ? im trying to figure how to get the best detecting without all the interference. I got a dd 11" coil but its still sensitive in sand. I feel this detector might not be the best for Florida beaches. ?? I might be limited to dry sand. :( do you know any modifications I can do to improve performance using delta 4000. any suggestions. ..ill be most grateful for your help. kk
@daveujcic25158 жыл бұрын
yes mate these will go on a 210 frame. just measure your screw hole distance incase you have an odd frame
@ChumWaffle8 жыл бұрын
Do you think you could put these on a 210 size frame?
@daveujcic25158 жыл бұрын
Gday. can't fault them as yet. so far they are reliable, have taken a few crashes. power up nicely. very happy with them to date. cheers
@daveujcic25158 жыл бұрын
thanks gunfreak2000. just ensure you get the correct coil for your detector. must say they are well worth their salt, in our opinion. happy swinging 👍
@GUNFREAK20008 жыл бұрын
What are centimeters!??.............lol joking ........great video.... Thanks.....you just talked me into(sold)me a NEL sharpshooter
@StarsOnMyBody8 жыл бұрын
increase D
@valkery80688 жыл бұрын
hi how are these motors working for you?
@daveujcic25158 жыл бұрын
yep. shocking mate. will be fixing this problem permanently in due course
@henshooten8 жыл бұрын
Bloody hell Dave that is shocking
@henshooten8 жыл бұрын
yeah boye it finally came ,you bloody ripper ,be up and flying in no time
@daveujcic25158 жыл бұрын
haha only a battery strap. tough little son of a bitch
@henshooten8 жыл бұрын
FUCK ,HE HIT IT AGAIN ,IM GUESSING THE BIG BATTERY ,SHE SOUNDED LIKE SHE WAS HAMMERING ALONG ,MUCH DAMAGE THIS ROUND???
Пікірлер
Rrrrtti9o Jjhjhhjjhjjjjj
would 95kg aka 200 pounds be a problem?
No
*this a wonderful starter Metal Detector>>>**ur2.pl/1217** I gave this to my son last week. I now know where every stud and nail in the carpets are in our home :) It's been nasty cold in Ohio. Looking forward to hiking and exploring as it warms up. I am very tempted to purchase one for my self so we can "treasure" seek for fun.*
It’s says it’s rated for 60 lbs
Hi can someone please tell me which mid range metal detector is best for gold nuggets?
Nice how much ?
Kay Kay 1,500$
I have a Oset Mx 10
Poor bike
Wtf
Hey mate thanks for that I've just got a second hand Nel hunter coil for the at pro international
I can't get mine to pick up coins any body know how to program it
HA! "Dirt Fishin'"
6:10My unit does the same thing. Does it get "confused" and read all types of coins?
Hi, On your's and other reviews, I decided to start with the Delta 4000. I immediately assembled it and it reacted to EMF of the parking lights. I eliminated the iron, and it settled down, but not completely. It didn't stop chirping though when, at the empty acreage next to the store, I "gave it a go."Again, eliminated iron, it still chirped. My first find was a piece of tin :-D But it wouldn't stop chirping. I adjusted the settings, eliminated foil and below, and it still chirped. Later, I threw a penny on the ground, and the 4000 went nuts trying to decide if it was a penny, dime, or quarter (it FINALLY decided it wasn't a half-dollar. ) Then it ignored the find. Additionally, I discovered the "rocks" were actually crumbled cement with pencil-lead sized steel. So I moved half-an-acre away and that took care of that. But then natural (hand-held) rocks (stream pebbles/rocks) were sounding it off too. So I stuck with pennies, quarters and the pin-point wand I got with it. The damn thing registered a depth of 8 inches on a penny that was right there LOS. Then once it found it (and not deciding what it was) it just shut-up and repeatedly ignored the find; silence as I was waving right over the penny. I don't get it. The acreage didn't have any electronics around it and no cell-towers/powerlines were LOS. (Phone in pocket.) So what do I do to get the solid readings you get? Thank you, "It was my first time, but I don't feel like "rolling over and having a cigarette."
HI,IF USING 8"CONCENTRIC COIL,IVE FOUND IT DOSENT WORK WELL,I PUT THE EXACT SAME COIL THATS ON MY TEK PRO AND IT WORKS GREAT.BUT SWITCH TO A DD COIL IS MY ADVICE,OR SEND COIL BACK TO EL PASO? ATB GL HH
Same down this way Melbourne Victoria, dry sand only detector. Unknown of any mods for Delta4000. My AtGold doesn't handle the wet sand either, however it does a little better than the 4000.
have you ever used it at the beach ? on dry and wet sand. ? im trying to figure how to get the best detecting without all the interference. I got a dd 11" coil but its still sensitive in sand. I feel this detector might not be the best for Florida beaches. ?? I might be limited to dry sand. :( do you know any modifications I can do to improve performance using delta 4000. any suggestions. ..ill be most grateful for your help. kk
yes mate these will go on a 210 frame. just measure your screw hole distance incase you have an odd frame
Do you think you could put these on a 210 size frame?
Gday. can't fault them as yet. so far they are reliable, have taken a few crashes. power up nicely. very happy with them to date. cheers
thanks gunfreak2000. just ensure you get the correct coil for your detector. must say they are well worth their salt, in our opinion. happy swinging 👍
What are centimeters!??.............lol joking ........great video.... Thanks.....you just talked me into(sold)me a NEL sharpshooter
increase D
hi how are these motors working for you?
yep. shocking mate. will be fixing this problem permanently in due course
Bloody hell Dave that is shocking
yeah boye it finally came ,you bloody ripper ,be up and flying in no time
haha only a battery strap. tough little son of a bitch
FUCK ,HE HIT IT AGAIN ,IM GUESSING THE BIG BATTERY ,SHE SOUNDED LIKE SHE WAS HAMMERING ALONG ,MUCH DAMAGE THIS ROUND???