Thanks for the video! New to yachting and couldn't find a better explanation!
@newera3757Ай бұрын
Subscribe to this guy. He even shaved his legs for us!
@AR-kl2cvАй бұрын
Watched all videos on this. Yours was the best Good job
@cjeccher81288 ай бұрын
skip to minute 5 to learn how to use a compass lol
@phucgougle427910 ай бұрын
Been using an original ATAK since 1995 paid $300 or so as i recall. Mines not so bright & shiny anymore hard chrome chipped off maintain it no rust its just O1 Starrett tool steel with a good heat treat...Kevin was a good salesman. Good knife same as a Randall 16 or 14, they're about a thousand dollar's cheaper. Go ahead use it, you wont break it.
@rnkmode187610 ай бұрын
Very nice but man, for me no way am i paying that for a piece of sharpened steel, and i thought Benchmade was pricey for their boring blades... Damn. To each his own, cool knife though.
@brentbeatty417111 ай бұрын
Works off of the magnetic pull of the earth's core?
@brycejohnson1780 Жыл бұрын
Thank you
@tapperken1 Жыл бұрын
Thanks for the advice . I still have trouble to find my way unerwater, most of all in a lake that is round.
@zato6226 Жыл бұрын
You presented that knife like it was the Holly Grail!All MD knives are Over priced, and Over Hyped!. It's made of a common 01 Tool Steel! But I guess if you gotta have a MD knife ... There's a video about MD and Cold steel .. Check it out.
@juraj7900 Жыл бұрын
Nice explantion. But you dont need to set up back azimuth after you want to go back to your starting position. you need only to turn the north arrow into the one bar (south). Therefore is there this one bar.
@ulbushcrafting6592 Жыл бұрын
Would love to see these knives being used. I guess I will have to buy one and test it myself. Anyone willing to watch the video if I do?
@mohamedal-busaidi2162 Жыл бұрын
Thanks I finally understood. Amazing
@ahmedsamy8406 Жыл бұрын
Very useful thanks a million
@Teleman012 жыл бұрын
I have been wanting one of his knives for a long time. But I just can't pull the trigger at those prices.
@quyle92292 жыл бұрын
Great info!
@Bradipop12 жыл бұрын
It is certainly a good knife, sturdy and very well built but in this respect it is on par with hundreds of thousands of other knives in the world and it is nothing more than a normal industrial steel bar with a synthetic handle; $ 1700 is definitely madness even if many parts of its work are done by hand!!! However, I agree that it is precisely for their insane price that they have and will always have a high collectible value and if you have the economic possibility to buy it, why not? Great review. 🙂
@sirarrowmen2 жыл бұрын
Looks like a big 5 special to me, so plain and boring not sure why people buy these knives honestly, I could see $300 maybe but $1700 is madness.
@HaiNguyen-cr1fu Жыл бұрын
I totally agree! I bought several different brands to try and with this price, you can get Rockstead knives, which are way better fit & finish, a lot better looking and much better steel, way sharper too. There's test done by Dutch Bushcraft Knives, it's crazy!
@alanseran69442 жыл бұрын
You gotta be a salesman. That watch can get yiu robbed .Your vid is interesting. A firearm these days could prevent that watch from being stolen..lol
@Yarah7772 жыл бұрын
Can you do a video on staying sober?
@keinezeitbrettspiele2 жыл бұрын
When using the belt loop, did you consider to use a piece of paracord or a flexible cord to bind the tip around your leg?
@jack.charlesc47502 жыл бұрын
Maybe a multitool and a spare bill in the phone case 10$
@flipflat48142 жыл бұрын
420 HC is a deal breaker for me, and I'm not even a steel snob. Come on Gerber 420HC is 2 steps above a gas station / flea market steel. Just plain old D2 would be good enough for me, heck i would even go for 12C27 or AUS 10, 1066, 1075, 1095 maybe even 440C. Yep any of those 7 modest steels and i would jump on it in a heartbeat, for even $90 to $120. Nobody can do better than Bucks Boss heat treated 420HC and that's not even something i can do. I carried a US made Gerber pocket knife for 20 years as an EDC made from 440C and it wasn't too bad. However with D2 now available for dirt cheap i wouldn't consider that anymore.
@Xander_Park2 жыл бұрын
Lol 🤣
@arctodussimus61982 жыл бұрын
Just found your video here. Gonna subscribe because your delivery and video presence feels comfortable to me. I got the Strongarm last month, and I’ve been watching all the videos I can find on it. I really like it. I prefer the big knives. Bowies, choppers, and one-tool-options. Eight to twelve inch blades. But the last couple of years I’ve been on a small knife binge. Four to six inch blades. I also think the Strongarm is one of the best knives for the money. Yeah, Mora makes a great knife, but I’ll never trust my life to a partial-tang knife. I would be happy to take the Strongarm into the bush as my primary tool.
@therightstuff98172 жыл бұрын
Much appreciated
@basednorsegael10892 жыл бұрын
I’ve had the strongarm for years and for the last few days I’ve been watching every video on it lol. Probably because I have the black serrated and want to get the coyote plain edge, idk. I think I just need to buy it and get it out of my system. It’s truly one of my favourite knives, aside from the Honshu conqueror Bowie - but that one is way too big to carry around everywhere lol
@papimaximus952 жыл бұрын
Agreed....good overall combat knife. I currently rock the SOG Seal FX for a duty/combat fixed blade. My go to camp/field knife is the Gerber Ultimate Fixed Blade which is very close to the StrongArm.
@basednorsegael10892 жыл бұрын
Hey are there any substantial differences in quality or design between the gerber ultimate and the BG ultimate? Or is it just the same thing with a different colour scheme?
@papimaximus952 жыл бұрын
@@basednorsegael1089 Literally the exact same with a small difference in the blade finish.
@Abeeeeeee2 жыл бұрын
👍👍👍
@fefferofhossen2 жыл бұрын
honest review if your into yes buy it is it worth it compared to what's out there no esp being o1 steel they claim military use but the only one i knew who is doing military is daniel winkler an chris reeve for sf graduates those are the facts
@KaylynnStrain2 жыл бұрын
you got one seriously adorable little sprout !!!!!
Пікірлер
Thanks for the video! New to yachting and couldn't find a better explanation!
Subscribe to this guy. He even shaved his legs for us!
Watched all videos on this. Yours was the best Good job
skip to minute 5 to learn how to use a compass lol
Been using an original ATAK since 1995 paid $300 or so as i recall. Mines not so bright & shiny anymore hard chrome chipped off maintain it no rust its just O1 Starrett tool steel with a good heat treat...Kevin was a good salesman. Good knife same as a Randall 16 or 14, they're about a thousand dollar's cheaper. Go ahead use it, you wont break it.
Very nice but man, for me no way am i paying that for a piece of sharpened steel, and i thought Benchmade was pricey for their boring blades... Damn. To each his own, cool knife though.
Works off of the magnetic pull of the earth's core?
Thank you
Thanks for the advice . I still have trouble to find my way unerwater, most of all in a lake that is round.
You presented that knife like it was the Holly Grail!All MD knives are Over priced, and Over Hyped!. It's made of a common 01 Tool Steel! But I guess if you gotta have a MD knife ... There's a video about MD and Cold steel .. Check it out.
Nice explantion. But you dont need to set up back azimuth after you want to go back to your starting position. you need only to turn the north arrow into the one bar (south). Therefore is there this one bar.
Would love to see these knives being used. I guess I will have to buy one and test it myself. Anyone willing to watch the video if I do?
Thanks I finally understood. Amazing
Very useful thanks a million
I have been wanting one of his knives for a long time. But I just can't pull the trigger at those prices.
Great info!
It is certainly a good knife, sturdy and very well built but in this respect it is on par with hundreds of thousands of other knives in the world and it is nothing more than a normal industrial steel bar with a synthetic handle; $ 1700 is definitely madness even if many parts of its work are done by hand!!! However, I agree that it is precisely for their insane price that they have and will always have a high collectible value and if you have the economic possibility to buy it, why not? Great review. 🙂
Looks like a big 5 special to me, so plain and boring not sure why people buy these knives honestly, I could see $300 maybe but $1700 is madness.
I totally agree! I bought several different brands to try and with this price, you can get Rockstead knives, which are way better fit & finish, a lot better looking and much better steel, way sharper too. There's test done by Dutch Bushcraft Knives, it's crazy!
You gotta be a salesman. That watch can get yiu robbed .Your vid is interesting. A firearm these days could prevent that watch from being stolen..lol
Can you do a video on staying sober?
When using the belt loop, did you consider to use a piece of paracord or a flexible cord to bind the tip around your leg?
Maybe a multitool and a spare bill in the phone case 10$
420 HC is a deal breaker for me, and I'm not even a steel snob. Come on Gerber 420HC is 2 steps above a gas station / flea market steel. Just plain old D2 would be good enough for me, heck i would even go for 12C27 or AUS 10, 1066, 1075, 1095 maybe even 440C. Yep any of those 7 modest steels and i would jump on it in a heartbeat, for even $90 to $120. Nobody can do better than Bucks Boss heat treated 420HC and that's not even something i can do. I carried a US made Gerber pocket knife for 20 years as an EDC made from 440C and it wasn't too bad. However with D2 now available for dirt cheap i wouldn't consider that anymore.
Lol 🤣
Just found your video here. Gonna subscribe because your delivery and video presence feels comfortable to me. I got the Strongarm last month, and I’ve been watching all the videos I can find on it. I really like it. I prefer the big knives. Bowies, choppers, and one-tool-options. Eight to twelve inch blades. But the last couple of years I’ve been on a small knife binge. Four to six inch blades. I also think the Strongarm is one of the best knives for the money. Yeah, Mora makes a great knife, but I’ll never trust my life to a partial-tang knife. I would be happy to take the Strongarm into the bush as my primary tool.
Much appreciated
I’ve had the strongarm for years and for the last few days I’ve been watching every video on it lol. Probably because I have the black serrated and want to get the coyote plain edge, idk. I think I just need to buy it and get it out of my system. It’s truly one of my favourite knives, aside from the Honshu conqueror Bowie - but that one is way too big to carry around everywhere lol
Agreed....good overall combat knife. I currently rock the SOG Seal FX for a duty/combat fixed blade. My go to camp/field knife is the Gerber Ultimate Fixed Blade which is very close to the StrongArm.
Hey are there any substantial differences in quality or design between the gerber ultimate and the BG ultimate? Or is it just the same thing with a different colour scheme?
@@basednorsegael1089 Literally the exact same with a small difference in the blade finish.
👍👍👍
honest review if your into yes buy it is it worth it compared to what's out there no esp being o1 steel they claim military use but the only one i knew who is doing military is daniel winkler an chris reeve for sf graduates those are the facts
you got one seriously adorable little sprout !!!!!
For now lol