DIY Lawn Guy

2 жыл бұрын

Orbit B- hyve WIFI Hose Timer/Installed and Programmed - DIY Lawn Guy

Пікірлер

@successfulMillennialКүн бұрын

Talk slow af😅 get to the point

@diylawnguyКүн бұрын

@@successfulMillennial h🤭

@kommoncents5853Күн бұрын

I have 2 toro 60v batteries for mowing. 1 is 6ah other is 5ah in the spring and fall I have no issues, but when thick crabgrass happens in mid summer combined with the heat it gets impossible to mow and the batteries die or overheat way too early. They wont charge after they die, I have to put them in the fridge for at least an hour before they take a charge, then they take at least 3 to 3-1/2 hours to charge again.

@Mike945x3 күн бұрын

Step 1 remove spark plug wire.

@diylawnguy3 күн бұрын

@@Mike945x 💪

@alfredpaz28052 күн бұрын

Curiosity why remove the plug ?

@diylawnguy2 күн бұрын

@alfredpaz2805 There is a possibility the mower can start.

@brianb75273 күн бұрын

The whole point of that tool is so you don't have to take off the blade dummy

@rickdaraska16724 күн бұрын

You need to show the dial and spray instructions

@diylawnguy4 күн бұрын

Yes, I will do tha soon. 💪

@anthonyconley44785 күн бұрын

Just buy a new one

@diylawnguy5 күн бұрын

@@anthonyconley4478 💪

@rob87166 күн бұрын

First step unplug the spark plug

@beachlifebestlife7 күн бұрын

disconnect spark plug boot first just in case

@diylawnguy7 күн бұрын

@@beachlifebestlife 👍 💪

@CustomCroshae7 күн бұрын

Is that you garden area? If so how long do I wait before gardening

@diylawnguy7 күн бұрын

I would say at least 1 month.

@TheStoryofLucaOrionChibiUsa8 күн бұрын

How do you know about the water control? Thats not clear in the instructions i think.

@Denis-cr4bs8 күн бұрын

First, pull off the sparkling plug

@diylawnguy8 күн бұрын

Yes 💪

@user-vc1qi6qv3m9 күн бұрын

Grinding wheel I prefer

@cliffnelson11749 күн бұрын

Put the blade in a vice.

@diylawnguy9 күн бұрын

@@cliffnelson1174 💪

@derrickrayclemons82979 күн бұрын

sharping lawn mower blade can be hazardous ☣️. Just used a file or order a new blade.

@Vash78311 күн бұрын

Step number 1, remove the spark plug. Trust me 🤘

@diylawnguy11 күн бұрын

Yes definitely

@merlinwilliams928611 күн бұрын

Those sharpeners aren't all that good, but you dont really want razor sharp. Disagree? Look at how sharp replacement blades aren't.

@merlinwilliams928611 күн бұрын

You want to hold the blade solid while sharpening? Don't remove it. If you are using this gizmo it's designed for that.

@diylawnguy11 күн бұрын

You have to remove the blade to balance it.

@merlinwilliams928611 күн бұрын

@@diylawnguy if you have to remove enough metal to unbalance it and you are taking the blade off anyway, you need a new blade.

@diylawnguy11 күн бұрын

@merlinwilliams9286 Yeah, replacing it might have been easier. But this was just to show another way to sharpen it.

@BillyTucker-hi4sd11 күн бұрын

I ain't worth a fuck

@alec111311 күн бұрын

Untighten = loosen 👍😊

@diylawnguy11 күн бұрын

Yes 😄 🤣

@JaxFacts12 күн бұрын

Amazon link for that aerator it is soo cool 2 how deep does the soil spike aerator penetrate into the soil?

@Ssp-sv7dp12 күн бұрын

Not enough seed

@dinhle-fv4hk3 күн бұрын

Plenty

@user-py3yz9fr7m15 күн бұрын

First thing you do is disconnect the spark plug idiot

@TheDylan690815 күн бұрын

Good review however would have liked to know how good or bad the string advance feature works and how easy or difficult re-stringing is. Oh well .

@diylawnguy15 күн бұрын

Thanks ! Yeah, the string advance works good, and to restring it's not difficult, but I do wish it was easier.

@TheDylan690815 күн бұрын

@@diylawnguy ok great. Thank you

@jeangabriel111416 күн бұрын

Helpful

@anthonycastillo370016 күн бұрын

Does it also kill broadleaf plantain?

@danielgroger74216 күн бұрын

Dude unplug plug

@diylawnguy16 күн бұрын

@@danielgroger742 💪

@williamh203218 күн бұрын

Those kits are garbage.

@diylawnguy18 күн бұрын

@@williamh2032 gets the job done 💪

@fernandorios632519 күн бұрын

I prefer slingblade option😅

@mcring54319 күн бұрын

2.5 oz per gallon of water. I couldn't find actual directions on the product labels.

@davidgonzales227419 күн бұрын

Remove spark plug-pull down right

@tomlowry28220 күн бұрын

For me it would just be easier to buy new ones..

@diylawnguy20 күн бұрын

💪

@don2deliver8 күн бұрын

Blades can get expensive. I've bent 2 already this season. Was able to straighten and sharpen one.

@larryscarry41120 күн бұрын

I've seen those when I was a kid 50 years ago old school stuff lol

@diylawnguy20 күн бұрын

😆

@metingordu62720 күн бұрын

Good job Arnold just next time don't speed up the video on important part okay Arnold? Thank you very much Arnold 👍

@shineon65120 күн бұрын

Well???? Guessing it didn’t work. :/

@diylawnguy20 күн бұрын

Seemed like it work didn't see new holes after this. But it could of been because of all the rain also.

@gordie22520 күн бұрын

Or you could just use your grinder. Every garage should have one.

@diylawnguy20 күн бұрын

💪

@OSAS72621 күн бұрын

Why use a board to keep the blade from moving? I always use a C-clamp and clamp it to the shroud on the inside. That way when you go to remove the blade with the socket, the blade then binds up against the C-clamp as you’re turning the socket to loosen or tighten the blade. It’s way easier than using a board. You can also use a wood clamp to do the same thing.

@diylawnguy21 күн бұрын

💪