Hi Here at 'Just the Good bits ' we have loads of fun doing numerous hobbies: Cooking, Gardening, Brewing, Woodworking, knitting, crocheting plus many others. Right now we need to lose weight so our focus is on Low Carb food by adapting traditional recipes and removing as much carbs from the recipe as possible. We are losing weight and wanted to share what we have learned with YOU so you can lose weight.
We will include videos of our pets and the wildlife around our country home just for fun and entertainment.
We are: Bob & Jan Bradham and we have included videos of just who we are on our channel under 'Journeys & introductions.'
We welcome all suggestions so please comment and don't forget to Like and Subscribe.
Пікірлер
Wow thank you! I turned the knob without any luck. Glad she got you to clarify what cycling was! I was asking myself that very question.
Glad to Help
Great video
Thank you!
Jesus does not eat pork, Muslims do not eat it, and Christians do eat it. Then the Christians say, “We are the followers of Jesus.” What is this contradiction?!
Aww cute kitty!
It's okay to wear whatever you want. Totems are tropical and are in rpg gaming and were in alot of cultures.
This was fun. Can't believe that you got all of this for just $28, even if they aren't real pearls. My favorite pearls are black pearls. There are some really neat and pretty pieces here. You definitely got your money's worth, and then some.
The small necklace is a choker. It is the cutest in the batch in my opinion. 😊
Thank you my husbands was going nuts trying to figure out why it wasn't going up and down! Lol! Crap now we have to put in fence posts! Lol!
Thank you
Good video! Great information. I have a Mahindra 1626 with the same valve mechanism
So I tried this and my thermostat controller blew out right when the fridge came on- like it pulled too many amps for it and fried it
Thank you so much and this video so much help for my own new swein machine for fixing.🎉️🎉️🎉️🎉️
are you leaving the scent gland in the meat
Hi there, it's been 4 years, is this Roaster Oven still working well?
Yes it is we made ham stock a couple of days ago. Thank you for your comment.
She was s adorable! lol bed your video.
I accidentally bought 2kg of Ground pork instead of beef that’s why I’m here. After I make the pork burger, I’ll come back to let you know how it tastes 😂
I can’t believe there are no comments on this video after 4 years!? It looks solid. Going to try it tonight and will check back later with the results!
Thank you! These really are great food.
Saya dua machine itu dengan machine jahit tepi okey 😢😮😮😅😊😊😊😊😊😅😅😊😊
Great, another chic nagging us,....maybe someone else will have a solution to any problem in the world......
thx
I dry hatched mine...good hatch rate...lock down is when I put on my humidity
I know this is an old video, but i have the same exact tiller. It was my dads. And i am about to put a new carb on it. I know i may sound like a dummy, but what shuts this off once you get it running? Is it the slider switch to the right of the carb with the rabbit and turtle picture on it?
I think that is the throttle which controls the gas going to the engine. I can’t remember where the kill switch is, it’s been 10 years since I’ve used this tiller. I’ll see if I can find out for you.
@@justthegoodbits1 thank you.
I really enjoyed the video, but I couldn't find the sheets to copy.
I have changed the page twice because the blogs I used to find these pages have been taken down. If I can still find mine I’ll upload them and put a link up. I’ll keep you posted.
If I was one of those big birds I sure wouldn't want to tangle with this guy. And, he is a pretty rooster. So true.
He is really a special little guy and your right he is beautiful. Thank you for commenting.
This just saved me from going crazy.
Would it be to put the wood side pieces in first then the bottom
If you are small enough to crawl inside without the flexibility then sure it would work. You may need to watch the video to understand what I'm meaning here.
I realize this is an old video, but I just came across it. Can you tell me what you fried your rib eye slices in the frying pan? Oil or butter?? And then what is the “green” that I notice was included with the steak in the wrap? I like using the Everything But the Bagel seasoning. Thanks in advance for your response. 👍
Thank you for doing this. I just started putting it together and your video has been incredibly helpful. I contacted Juki as far as directions go and have yet to hear from them. I have a degree in fashion design and the sewing machines we used were these. They are incredible and probably the best I’ve ever used. I guess they know that.😂
We are happy this video helped you out. Thank you and good luck with your fashion career.
You simplified the whole process, will be taking what i learned for dinner , Thanks . Never had an air fryer, my sister gave me one extolling the benefits and I might be a believer . God bless you both !!!
Hi, I've just bought the 8700H & things have been going smoothly with the regular foot it came with however, my zipper foot for the 8700 model I got years ago does not seem to do well when going over webbing or fabric. When sewing with it, I am unable to backstitch and nesting begins to form at the underside of the fabric/material. Is there a specific zipper foot needed for the H model or are the parts interchangeable with the regular 8700. Seeing as though you have no problem using a zipper foot similar to the one I'm referring to on the machine in the video, do you have any troubleshooting tips for my specific issue? Anything would help as I have looked for hours trying to figure out the problem.
My Zipper foot is the same foot used on both 8700 & 8700H the feet are interchangable. If you are getting nesting then something else is wrong, Is your bobbin thread coming off in the right direction, also make sure it is secure in is case. It sound like the arm on your zipper foot may be to long check it with the foot that came with the H and see if the length on both feet are the same size. Other that those things I can't think of anything else that would cause this problem. Thank you.
@@justthegoodbits1 @justthegoodbits1 Thank you, I will compare lengths. I watched a video on presser foot pressure adjustment, is it possible that the presser foot pressue may be too low causing my fabric not to move through evenly and bunch up. If so, do you advise I twist the adjustment knob or leave it the way it is so that I do not further mess up anything. I'm scared to worsen the issue.
That note pad is beautiful. And, yes, it can go into a purse or bookbag, etc. For a writer, think of how they, while out, think of a line or two, and write it on napkins and such. Therefore, note pads come in handy for writing a list or a line for a story, poem, or some other reminder. I really like the pockets inside. For coupons as well as for other little notes of info, such as a name and address, etc. This one is cute. 👍❤🙂
Thank you, Donna for you kind words.
It's just adorable!!! Thank you so much for sharing! Be especially blessed. ♥
Thank you, so much!
LIKE👍👍👍👍👍 ❤💛💜🖤 🤍 🖤💜💛🧡 💯💯💯💯
Brilliant
I love them 2. Ty
Thank you!
Thank you!! Love these type of videos . Your wife is awesome 🎉😊
I love it. I think anyone who loves horror will love it. I think the quill is better than the pen. Everyone has pens but not quills.
Thank you, irishNanette.
This is exactly what I was looking for, I received one for a Christmas gift and couldn't figure out how to use it. Thank you 😊
We use ours for bone broth, rendering fat, Roasting pork butts and other large meat joints. All of which you can find how to do on our channel. Thank you for commenting.
This is a beautiful broth. Thanks for the great presentation and PRECISE instructions.
You are very welcome.
Awesome!!! Age is an issue of mind over matter. That tool looks like hole punch.
I think it is for rolling the petals to get the effect of a flower. I'll do a video showing how it is done or isn't done as the case may be.
For that thread stand, open the top of your machine and lift it straight up by the sides. Then you can slide the thread stand in the top. Isn’t it a beautiful machine!❤
Thank you, I have never used the thread stand haven't used spools to big for the maching and yes it is beautiful!
I wish you were my neighbor, you’re so sweet! We could compare each others ideas and sew together.
Thank you, you are sweet too. Shame you can't pick your neighbors. It would be great to have a neighbor like you.
I use Saran Wrap on those spools to keep them from unraveling and keeps the dust off too.
Great idea!
Don’t forget to do your upgrade. I am about to. Right now.😊
Will do!!
Isn’t it wonderful❤. My Altair arrived yesterday. I know how you feel.
Don't forget to download and install the updates. Have a wonderful time, it is really a wonderful machine. Thank you
What a great video !! I never saw a wild owl🦉
We have seen this little one twice there is another short when he was under a tree about half the size he is now and still as confused as ever.Thank you for commenting.
So creative! I have not seen anything like these! They're really cute and so was your video, especially when you got so tickled!
Thank you, I love these so much.
How fun! Thank you for sharing. I’ve gotten the freebie and hope to get something made soon.
I would love to see what you do with this. It really is a fun card to play with and working out what images to use for a family member or friend is fun too.
How's it working a year later? Any changes?
It works great only change I made was tying it down so the pigs can't tip it over when it gets low on feed. Even still when they tipped it over it didn't hurt the feeder at all. If I kept it 400 pounds in it there would be no problem but can't always do that. Thanks for your question.
Cute project I’m glad you joined and I found you. I’ll have to check out your other videos. I’m chillin in the hospital watching craft videos.
Oh sweetie, I hope you will be home feeling great very soon. I too when sick, feeling down allways watch craft videos, it really is a great pick-me-up, because I want to pick myself up and start crafting.
I adore the images you chose. And I'm going to get me one of those rollers. I've never seen one of those before. I don't do crafts (hardly ever) but I do use glue on paper from time to time and that tool would come in handy. Such a neat trick with using a bead with that tiny notebook. Touche to your husband with that idea. This 'grocery shopping' notebook is cute as can be.
How sweet, thank you! The roller is called a roller brayer.
@@justthegoodbits1 Thank you. I'm writing that down on my 'to buy' list so I won't forget what it's called. The thing is, I use a tube of 'envelope moistener with adhesive' to seal my envelopes (like they use at the post office). And, the roller brayer would be perfect for that. I also think it's a neat thing to use.