I'm a car enthusiast who loves documenting my projects and sharing my passion with others! Subscribe today to see DIY car modifications, repair tutorials, POV drives, and much more!
My flap broke but, now I like it because my phone fits nicely in there.
@knowklelowbody75052 күн бұрын
This is actually extremely useful, thank you for this video. I have similar problems with my '07 LE with drums in the back - would you suggest changing the shoes or the cables first?
@johnny-becker2 күн бұрын
No issue with the hyper flash due to the low voltage turn signals?
@naseemtuanpituk8303 күн бұрын
Hey there where can I order the gts dead padel(foot rest) thank you
@tiqi77414 күн бұрын
nice diy upgrades! planning and manifesting to get a corrolla 9th gen this year as my first car!
@vibeshubja61336 күн бұрын
Is it sold as a set for the display on the website?
@robertoperez35188 күн бұрын
You have to be very careful about using cork kind of gaskets. Right now ive beeing using it in my 2zz four about 2 years but at the begining i lost a lot of oil and i almost kill the engine due a big unexpected oil leak. You need to retorque your oil pan bolts in this kind of gaskets after an engine warming up and recheck and retorque every often. A mechanic told me that this kind of gaskets were very common in older cars and there is a product that i forgotten the name that you apply to them and helps avoid oil leaks.
@user-wg5xl9vo8u10 күн бұрын
More bad music
@ToxcityYT12 күн бұрын
Is there a light bulb in the “AUTO” button that controls driver window
@callmerin21612 күн бұрын
Hey man I know this completely different for what your showing on video but I have a problem with my Corolla 2004 s and well I let me explain
@callmerin21612 күн бұрын
Basically it shakes a lot during idle and it starts to sound like a misfire but when I plug the obd2 it shows me ignition coils #2 is working properly but I changed it and yet nothing it only stops if I disconnect the maf and clean the pvc valve and reconnect the battery. I’m assuming it’s a vacuum leak because there was a hose that was toasted. Please let me know. If you have email I can send videos just tryna get help yk
@eduardconstantin923012 күн бұрын
So for return line you have to weld valve back to reservoir to connect that line ?
@openureyes13 күн бұрын
Fantastic vid 👏
@orion574813 күн бұрын
I have a toyota corolla 08 I was told to change the sway bar? Should I? Which one should I do top or bottom? Both?
@jamesclifford283014 күн бұрын
what exhaust are you running ? the induction + exhaust sounds way better than my 2zz
@JustAGuyYaKnow4215 күн бұрын
Are there any trims on the shifter cables? All of the "down" gears on my Celica's stick are hard to get into, 2/4/R.
@ewrepz20 күн бұрын
How Subaru's got their Reputation:
@gamalielcampos756921 күн бұрын
Aye bro you think I can turbo my 2015 ford fusion se 2.5 liter like what would I need to do first to get started please lmk please 🙏🙏
@TheLordMurasame22 күн бұрын
The hazard button bulb is a T3, but what fit is it? 8mm? Im finding multiple different fits.
@user-eo2wg2st8g24 күн бұрын
Can I put in toyota corolla2005
@luisalamo877225 күн бұрын
Hose power
@Ottobawt25 күн бұрын
How do you like the quality of the Monkey Wrench Racing brake lines?
@GigasAhriman28 күн бұрын
Me deciding interior or exterior first when it's freezing: Heads Interior, Tails Exterior. "Hey Siri, flip a coin" Siri: "It's Tails.' "...Flip again."
@zoop3429 күн бұрын
Are there no sway bar bushings?
@KirkWalters-zz6yiАй бұрын
So you didn’t even show it with the rails off.
@prestonhunt6379Ай бұрын
Is this safe for a bone stock 1zz that was well taken care of? Do these engines handle the boost ok?
@user-wg5xl9vo8uАй бұрын
Rare as hens teeth
@knowklelowbody7505Ай бұрын
Nice fix! Mine came off while I was installing my new headunit, so I just decided to mount the microphone that came with it in the cubbyspace and leave it alone :P
@user-gh5if5oo2fАй бұрын
What is you installed 2 or 3 way speakers in the door panel but you also had stock tweeters ? How do you by pass the tweeters? Too much trebel otherwise
@blairlindsay5791Ай бұрын
will should expect an increase in crankcase pressure , with addition of turbo . Fix the oilpan
@thomas5714Ай бұрын
This makes the to do list. Tip for future use: Scratch Home Depot. ACE Hardware has nut bolt & fastener draws where you can but 1 of what you need and not be forced into a pack of 20. They also have bins loaded with every exterior & interior body & panel clip you need. Just bring in one to match the one you need, and again, you can buy only what you need for pennies and not be hosed by dealer, amazon & eBay prices. Dealers are brutal, they hit me $2.17 each for two interior clips that are $0.17 each at ACE! ACE is the place, not Advance, Autozone, NAPA or O'Reilly either.
@Bruno-gw1uhАй бұрын
I have the same exact problem on the same exact side on my XRS. No wonder why my car starts rolling after I lift the parking brake
@thomas5714Ай бұрын
OH darn! Too late - you ordered the clock. All you needed to do is reheat the pot welds. kzread.info/dash/bejne/ppp7p5Z6lbe3c6g.html&pp=ygUXMjAwNSBjb3JvbGxhIGNsb2NrIGZpeCA%3D
@thomas5714Ай бұрын
Sub'd & liked b/c this is the 2nd vid you've done I'm very interested in doing, so much so I drove 84-miles one-way to the dealer that serendipitously has the console lid upgrade you installed. It'll be in tomorrow, so I go back to see if it will actually match/fit in my 2004S ((bought new in Oct of 03)) b/c they say it's for XR & XRS Models only, but pictures of the interior looks identical for fitment - I'll know tomorrow and have you to thank. I just replaced the Front L & R window channels, I'll probably treat the car to these Visors too as the OEM accessories are no longer available. TIP: Get a can of WD40 SILICONE SPRAY and hit those window channels - your window motors will thank you! BTW: Maybe you know this already, but the odometer in 9th Gen Corolla/Matrix, & other Toyota models from those years, stops at 299,999-miles. I just found out this April, and now track miles using TRIP ODO 1 between gas ups and an excel spreadsheet. I'm at 306K now. I could go on and on about my ride, but I'll surf what other gems you got - so far its 2 for 2!! Thanks pal.
@juboi5873Ай бұрын
Hey I'm about to get a corolla, your videos has been inspiring me to mod my corolla!
@thomas5714Ай бұрын
Now you got me hunting for one.
@thomas5714Ай бұрын
Found it! Pick it up tomorrow - from a dealer who put it on eBay - drove 84-miles to find out "it'll be here tomorrow". Just watched this again - it's gotta fit - even if they advertised it was for XR & XRS Models only.
@jacksontravis8646Ай бұрын
Could blowing a fuse become a problem with changing everything?
@TheBigToe1Ай бұрын
I know thos video is 2 years old but does ANYONE know what car that arm rest came out of??? Any info would be appreciated
@yahzfoe29 күн бұрын
2006 scion tc
@TheBigToe119 күн бұрын
@@yahzfoe thank you
@elvisolivares907Ай бұрын
Hello, good video, very practical.
@3obardThawn3Ай бұрын
I really enjoyed it. You just got a new subscriber. Great video...😊😊😊😊
@mackcummy4976Ай бұрын
How much power and boost?
@isiahdonovandailycarrepair4819Ай бұрын
Automatic😂 buddy u need a 5 speed ur gonna fuck that
@oceanparkpier670Ай бұрын
Hi Will, To your knowledge, is the 03’ Corolla LE prewired for fog lights? I can’t seem to find the connectors.
@santitopr51Ай бұрын
5:56 you let a bit of trauma there bro, are you okay?
@CalebswansonvideoАй бұрын
Hey man I'm dealing with a lean condition as well (+40 LT fuel trim) I grabbed some injectors and a guy who tunes celicas says that the ecu will eventually revert back to the lean condition over time. How has yours held up? Still running slightly rich?
@lorenipsum93Ай бұрын
no hate but did you paint your brake rotors?
@firstchancetryingboy4198Ай бұрын
Is it just straight bolt on?
@dyarom4575Ай бұрын
How many led bulbs T4 and T3 ? Window defrost is also T3 like Hazard button ?
@pavelslama5543Ай бұрын
5:33 Its colder because it doesnt combust properly. If you take it to the extreme and run with super mega rich mixture, you´ll find out that your engine never heats up because barely anything burns properly. There will be a ton of smoke, some backfire, and almost no heat or power. My MR2 with 1ZZ has some issue probably with the pressure regulator or something, because despite having a short term fuel trim around 0% (-2% to +2%), the long term fuel trim is -40% on both banks (super rich). I have already replaced all the spark plugs and injectors, which stopped all the misfires, but its still rich, so it´s likely gonna be the pressure regulator.
@pavelslama5543Ай бұрын
4:25 I bought an MR2 Spyder with original 1ZZ engine. However it had serious misfires and I found out that one spark plug is very much fouled. It looked like injector issue, so I bought a set of new ones. They came already equipped with an orange o-ring that physically looked to be just fine. I´ve installed them, and took the car for a test ride (about 1km around the scarcely used roads in an industrial district close to my home), and when I returned, I found my engine completely flooded with a boiling gasoline absolutely everywhere. I was so lucky that I didnt burn my car down. I immediately bought an original set of o-rings (sadly they only come in a package of 20 pieces here in Czech Rep.), then I put those to the injectors (the originals are noticeably softer and more flexible), and the leak immediately disappeared. NEVER TRUST AN O-RING THAT YOU HAVEN´T BOUGHT AND INSTALLED YOURSELF!
Пікірлер
My flap broke but, now I like it because my phone fits nicely in there.
This is actually extremely useful, thank you for this video. I have similar problems with my '07 LE with drums in the back - would you suggest changing the shoes or the cables first?
No issue with the hyper flash due to the low voltage turn signals?
Hey there where can I order the gts dead padel(foot rest) thank you
nice diy upgrades! planning and manifesting to get a corrolla 9th gen this year as my first car!
Is it sold as a set for the display on the website?
You have to be very careful about using cork kind of gaskets. Right now ive beeing using it in my 2zz four about 2 years but at the begining i lost a lot of oil and i almost kill the engine due a big unexpected oil leak. You need to retorque your oil pan bolts in this kind of gaskets after an engine warming up and recheck and retorque every often. A mechanic told me that this kind of gaskets were very common in older cars and there is a product that i forgotten the name that you apply to them and helps avoid oil leaks.
More bad music
Is there a light bulb in the “AUTO” button that controls driver window
Hey man I know this completely different for what your showing on video but I have a problem with my Corolla 2004 s and well I let me explain
Basically it shakes a lot during idle and it starts to sound like a misfire but when I plug the obd2 it shows me ignition coils #2 is working properly but I changed it and yet nothing it only stops if I disconnect the maf and clean the pvc valve and reconnect the battery. I’m assuming it’s a vacuum leak because there was a hose that was toasted. Please let me know. If you have email I can send videos just tryna get help yk
So for return line you have to weld valve back to reservoir to connect that line ?
Fantastic vid 👏
I have a toyota corolla 08 I was told to change the sway bar? Should I? Which one should I do top or bottom? Both?
what exhaust are you running ? the induction + exhaust sounds way better than my 2zz
Are there any trims on the shifter cables? All of the "down" gears on my Celica's stick are hard to get into, 2/4/R.
How Subaru's got their Reputation:
Aye bro you think I can turbo my 2015 ford fusion se 2.5 liter like what would I need to do first to get started please lmk please 🙏🙏
The hazard button bulb is a T3, but what fit is it? 8mm? Im finding multiple different fits.
Can I put in toyota corolla2005
Hose power
How do you like the quality of the Monkey Wrench Racing brake lines?
Me deciding interior or exterior first when it's freezing: Heads Interior, Tails Exterior. "Hey Siri, flip a coin" Siri: "It's Tails.' "...Flip again."
Are there no sway bar bushings?
So you didn’t even show it with the rails off.
Is this safe for a bone stock 1zz that was well taken care of? Do these engines handle the boost ok?
Rare as hens teeth
Nice fix! Mine came off while I was installing my new headunit, so I just decided to mount the microphone that came with it in the cubbyspace and leave it alone :P
What is you installed 2 or 3 way speakers in the door panel but you also had stock tweeters ? How do you by pass the tweeters? Too much trebel otherwise
will should expect an increase in crankcase pressure , with addition of turbo . Fix the oilpan
This makes the to do list. Tip for future use: Scratch Home Depot. ACE Hardware has nut bolt & fastener draws where you can but 1 of what you need and not be forced into a pack of 20. They also have bins loaded with every exterior & interior body & panel clip you need. Just bring in one to match the one you need, and again, you can buy only what you need for pennies and not be hosed by dealer, amazon & eBay prices. Dealers are brutal, they hit me $2.17 each for two interior clips that are $0.17 each at ACE! ACE is the place, not Advance, Autozone, NAPA or O'Reilly either.
I have the same exact problem on the same exact side on my XRS. No wonder why my car starts rolling after I lift the parking brake
OH darn! Too late - you ordered the clock. All you needed to do is reheat the pot welds. kzread.info/dash/bejne/ppp7p5Z6lbe3c6g.html&pp=ygUXMjAwNSBjb3JvbGxhIGNsb2NrIGZpeCA%3D
Sub'd & liked b/c this is the 2nd vid you've done I'm very interested in doing, so much so I drove 84-miles one-way to the dealer that serendipitously has the console lid upgrade you installed. It'll be in tomorrow, so I go back to see if it will actually match/fit in my 2004S ((bought new in Oct of 03)) b/c they say it's for XR & XRS Models only, but pictures of the interior looks identical for fitment - I'll know tomorrow and have you to thank. I just replaced the Front L & R window channels, I'll probably treat the car to these Visors too as the OEM accessories are no longer available. TIP: Get a can of WD40 SILICONE SPRAY and hit those window channels - your window motors will thank you! BTW: Maybe you know this already, but the odometer in 9th Gen Corolla/Matrix, & other Toyota models from those years, stops at 299,999-miles. I just found out this April, and now track miles using TRIP ODO 1 between gas ups and an excel spreadsheet. I'm at 306K now. I could go on and on about my ride, but I'll surf what other gems you got - so far its 2 for 2!! Thanks pal.
Hey I'm about to get a corolla, your videos has been inspiring me to mod my corolla!
Now you got me hunting for one.
Found it! Pick it up tomorrow - from a dealer who put it on eBay - drove 84-miles to find out "it'll be here tomorrow". Just watched this again - it's gotta fit - even if they advertised it was for XR & XRS Models only.
Could blowing a fuse become a problem with changing everything?
I know thos video is 2 years old but does ANYONE know what car that arm rest came out of??? Any info would be appreciated
2006 scion tc
@@yahzfoe thank you
Hello, good video, very practical.
I really enjoyed it. You just got a new subscriber. Great video...😊😊😊😊
How much power and boost?
Automatic😂 buddy u need a 5 speed ur gonna fuck that
Hi Will, To your knowledge, is the 03’ Corolla LE prewired for fog lights? I can’t seem to find the connectors.
5:56 you let a bit of trauma there bro, are you okay?
Hey man I'm dealing with a lean condition as well (+40 LT fuel trim) I grabbed some injectors and a guy who tunes celicas says that the ecu will eventually revert back to the lean condition over time. How has yours held up? Still running slightly rich?
no hate but did you paint your brake rotors?
Is it just straight bolt on?
How many led bulbs T4 and T3 ? Window defrost is also T3 like Hazard button ?
5:33 Its colder because it doesnt combust properly. If you take it to the extreme and run with super mega rich mixture, you´ll find out that your engine never heats up because barely anything burns properly. There will be a ton of smoke, some backfire, and almost no heat or power. My MR2 with 1ZZ has some issue probably with the pressure regulator or something, because despite having a short term fuel trim around 0% (-2% to +2%), the long term fuel trim is -40% on both banks (super rich). I have already replaced all the spark plugs and injectors, which stopped all the misfires, but its still rich, so it´s likely gonna be the pressure regulator.
4:25 I bought an MR2 Spyder with original 1ZZ engine. However it had serious misfires and I found out that one spark plug is very much fouled. It looked like injector issue, so I bought a set of new ones. They came already equipped with an orange o-ring that physically looked to be just fine. I´ve installed them, and took the car for a test ride (about 1km around the scarcely used roads in an industrial district close to my home), and when I returned, I found my engine completely flooded with a boiling gasoline absolutely everywhere. I was so lucky that I didnt burn my car down. I immediately bought an original set of o-rings (sadly they only come in a package of 20 pieces here in Czech Rep.), then I put those to the injectors (the originals are noticeably softer and more flexible), and the leak immediately disappeared. NEVER TRUST AN O-RING THAT YOU HAVEN´T BOUGHT AND INSTALLED YOURSELF!