Пікірлер

• 
  @Lilliputian633 күн бұрын

  I love this stuff, and it's a heck of a lot cheaper than kerdiboard. Recently, working on a project, using GoBoard, I encountered what to me looks like a major manufacturing defect. Everyone knows that GoBoard has an interior core and an exterior "skin". The problem is, the interior core appears to be manufactured in lengths that don't always fall evenly on cuts. And so in my board (I've now found it in 2) have a seam of internal core boards that meet at approximately 2/3rds of the length. The problem is, when I screwed this to the studs, the board had a slight buckle at the seam joint, creating a crown that was about 1/8" high. Not good, especially if you have to tile across it. I used a rasp to scrape it down just a bit, without cutting through the outer skin, but this has me wondering an out the manufacturing process. Why not match up entire lengths of the core with the skin? Why are they trying to join together 2 separate cores inside a whole board? I'm not happy and if I use it again, I'll be looking to pick out boards without these seams.

• 
  @thelaserdoc13 ай бұрын

  Why do you add mesh to the floor and not to the wall.

• 
  @DannyStickley3 ай бұрын

  What if you overfill the gap?

• 
  @heresalemonsukonit2762 ай бұрын

  Cut it back with an insulation knife (home depot) It's a cleaner cut then a handsaw

• 
  @GerrysGuitar3 ай бұрын

  Wow, pretty informative. However, you messed up on your tile layout by mirroring the inside cuts instead of continuing the flow. Better luck next time.

• 
  @theoPhobiaz4 ай бұрын

  Yeah, not happening, lol

• 
  @unccysammy4 ай бұрын

  Inside corner instructions? Did i miss the part where he gives instructions for sealing the inside corner? Id like to see that.

• 
  @Wilem354 ай бұрын

  No, use foam boards only in a crawlspace.

• 
  @Tom-zp1rp4 ай бұрын

  Talk out the thousands your company murdered in Manville Nj

• 
  @safeliving-home4 ай бұрын

  I've been following your bathroom renovation projects and appreciate the insights you share. I recently conducted a detailed exploration into the safety and installation practices concerning foam core backer boards, specifically focusing on the critical role of wood blocking for secure grab bar installations. Our findings highlight the potential risks and structural integrity issues that can arise from omitting wood blocking, even with the most reliable materials and techniques. Given the importance of safety and durability in renovations, I thought this information could be beneficial to your projects and audience. Incorporating wood blocking can significantly enhance the strength and safety of grab bar installations, a detail that's often overlooked. I'd be happy to share our findings and discuss further. Keep up the great work, and thank you for sharing your knowledge with the community!

• 
  @user-xl8oj4mq7p4 ай бұрын

  What if you hit it right between the studs?

• 
  @michaeld26134 ай бұрын

  I have seen where people install horizontal backing behind the Go Board about waist high just in case someone slips and hits the wall with significant force. An added bonus is you can add a grab bar in the future with sufficient support.

• 
  @davidsquires28025 ай бұрын

  Right ear is huge

• 
  @gwb84455 ай бұрын

  Get rid of the annoying background music!

• 
  @twelfthhausjones67536 ай бұрын

  I miss when educational videos were like this - straight to the point, informative, & clear to understand. Thank you for this video, it was very helpful.

• 
  @redsresearch6 ай бұрын

  what kind of sealant?

• 
  @foggymtnbreakdown6 ай бұрын

  That "music" is just SO bad, it is painful.

• 
  @davidchillton17447 ай бұрын

  It be great if your reps would actually give a price for the product

• 
  @michaelcarton32998 ай бұрын

  Why are you using loctite sealant? GOboard sells its own sealant. Is there a list of approved sealants???

• 
  @ganymededarling5 ай бұрын

  This is a really old video probably before they made their own sealant

• 
  @tabbott4294 ай бұрын

  its half the price and works just fine

• 
  @unccysammy4 ай бұрын

  Someone mentioned in a comment on here that there is a list of approved sealants on the website.

• 
  @thomasmurphy93508 ай бұрын

  He he he said black cox😂😂😂

• 
  @thomasmurphy93508 ай бұрын

  Nice work thanks especially for showing how to work it down that makes a big difference in the way the corners last. In the winter we do a lot of temporary repairs for upcoming customers and projects. And you really can tell the difference in how they are installed 😂😂😂

• 
  @salcosta11569 ай бұрын

  Does anyone know if fiberglass tape and mortar be used for the Go Board seems instead of Polyurethane sealant? Also, can Mapei Aqua Defense be use to cover the entire board, as an extra waterproofing step?

• 
  @DR-um2bv8 ай бұрын

  What you find out

• 
  @AK-ky3ou8 ай бұрын

  Sure, if you’re covering the entire board with a waterproof membrane you might as well buy something cheaper.

• 
  @tabbott4294 ай бұрын

  why bother?. If your tile lets water behind it youve got bigger problems

• 
  @JW779 ай бұрын

  What type of surface material is it? Can rodents chew through it? I'm thinking about making my crawlspace entrace cover out of this.

• 
  @mirapeters88959 ай бұрын

  Too fast

• 
  @ericroskos450010 ай бұрын

  I would make my Target out of field material and it would still have theinch going up the pipe before I feild wrapped it

• 
  @JamesDavis-dn3wo11 ай бұрын

  Why are you using Aqua Defense when it states right on the board that it is waterproof?

• 
  @2222MUDDYWATERS6 ай бұрын

  Seams

• 
  @callmemcgyver11 ай бұрын

  Is this product similar to Easy Board?... I used Easy Board a few years ago for a non-tiling related project and liked it, but it seems to be discontinued now and I'm looking for a similar material. Easy Board was similar to Gator Board, (used in sign making) in that it had a dense foam core, sandwiched between a rigid waterproof skin. Thanks in advance for any information.

• 
  @robertsalvador509711 ай бұрын

  You guys need an updated video

• 
  @JavierGonzalez-pn1gk Жыл бұрын

  This helpful for people like me as a apprentice

• 
  @moemanm1202 Жыл бұрын

  Can you use a silicone sealant instead of a polyurethane sealant? I was under the impression that polyurethane detetiorates after 5 years whereas silicon can last 20+.

• 
  @ryanmuth23908 ай бұрын

  Their website says they do not recommend silicone but it has a list of other approved sealants

• 
  @josevera5426 Жыл бұрын

  This guy know what hes doing! nice trick to cut a piece with the exact dimensions to wrap the cone avoiding wrinkles

• 
  @eltonnoway7864 Жыл бұрын

  STOP: Do Not Use this video for instructional guidance. GoBoard is great... but the installation instructions have changed many times in the last 7 years. Do yourself a favor and search KZread for a more current GoBoard installation video.

• 
  @mirapeters8895 Жыл бұрын

  I thought you didn’t have to apply redgard or other products like that if you use the GoBoard sealant. So you need the other stuff too?

• 
  @chrisc.186810 ай бұрын

  You only need the waterproofing membrane where you didn’t use polyurethane sealant.

• 
  @hollys4664 Жыл бұрын

  please turn that background music off.

• 
  @bajatankpozarica6130 Жыл бұрын

  A cuantos grado para soldar ese material

• 
  @Bryan-by5sb Жыл бұрын

  No se quema específicamente por grados sino por niveles de calentamiento el heatgun tienes del 1 al 9 en la mayoría… para empezar se recomienda al 7; yo la uso al 8 ya si quieres ser más rápido le subes al 9 pero ahí ya quiere más experiencia pero ay muchos mas factores que también afectan.

• 
  @Diaz06206 ай бұрын

  Uno mismo te vas dando cuenta pero yo te digo que es mejor 7 la mayoría de las personas note dice si le subes es más rápido pero hay otros tiene que subir los 9

• 
  @alexanderaldana44373 ай бұрын

  Cuando se hacen detalles como ese es mejor en 6 amigo el 7vpuedes usarlo para membrana regular

• 
  @buckJuddson Жыл бұрын

  I have never seen anybody use their fingers to roll it in 😂

• 
  @EricPotratzM Жыл бұрын

  Why is GoBoard installed on the floor with thinset instead of sealant like in the wall installation?

• 
  @TruongNguyen-fc2hw6 ай бұрын

  Probably because you would go broke spreading that stuff on the floor

• 
  @tabbott4294 ай бұрын

  Its not a pool. You dont need waterproof seams on the floor. THey alwasy overkill this stuff.

• 
  @joeshulman2501 Жыл бұрын

  Great video but Id rather just buy the TPO boot from flashco for 30 bucks.

• 
  @rickvess790 Жыл бұрын

  The "how to" directions from JM has changed SO MANY times in the last 6 years becuase they have added many different supplemental items to make thier original GoBoards better. I wish they would eliminate all of the old (now WRONG) internet references and publish a new definitive set of best practices based upon what they currently offer.

• 
  @garrettp.50188 ай бұрын

  Agreed! I’m seeing a lot of different techniques that are “sponsored” by John’s Mansville.

• 
  @ireflectOfficial5 ай бұрын

  What’s the best recommended sealant for the board? GoBoard sealant, OSI Quad max or something else?

• 
  @c1rca2313 күн бұрын

  @@ireflectOfficialthey do make their own caulking product. GoBoard pro sealant.

• 
  @eddiemurray5508 Жыл бұрын

  Thank you. Nice video

• 
  @DavidT-kr8fl Жыл бұрын

  Why cant you add insulation on the room side of the wall?

• 
  @AKshootingARs Жыл бұрын

  We just finished installing this insulation in our house, we did it ourselves, and I am just beyond impressed!! This stuff truly is amazing!! So much easier to use, and just so far superior in every way!!! I am so happy with my choice!!! If u need to insulate or replace insulation, this is what u want!!! I will never use any other type of insulation again!!!🥰😍🤩

• 
  @cbr815riders Жыл бұрын

  Damn you took too long to do this plus one piece target should do the job just fine...

• 
  @davidperry4013 Жыл бұрын

  I face staple it with a Milwaukee M18 fuel narrow crown stapler.

• 
  @jesusgamez8526 Жыл бұрын

  That should of had been one detail pipe A target on top of that then the part that you’re doing in the end nd it has to be 2 inches lab in bottom

• 
  @jayrichards3672 Жыл бұрын

  Dude, don't look now your right earlobe is Yuge!!

• 
  @cherie1651 Жыл бұрын

  do you remove the carboard/rigid foam after the job is done?

• 
  @hooflungpoo8757 Жыл бұрын

  This video tells me JM is hard up for help. Red flags everywhere in this video.

• 
  @johnbeamer101 Жыл бұрын

  Thank you bro I always wrapped these in two pieces I got it now

• 
  @MetsLR86 Жыл бұрын

  A quick no nonsense video on exactly what I was looking for. Thanks!

• 
  @lissa4306 Жыл бұрын

  Do you have a video tutorial on how to cut cant strips for inside corners?