Pinion can lightly scratch it but its insignificant so no
@gleefulsgaming368826 күн бұрын
@@rcmagnet ok
@JesseBlumАй бұрын
What the hell is that called
@rcmagnetАй бұрын
This is a center or pilot hole punch
@JesseBlumАй бұрын
This dude=life saver haha
@rcmagnetАй бұрын
Glad it helped you :)
@igeliga4 ай бұрын
What foam do you recommend for that tire?
@rcmagnet3 ай бұрын
I have 3d printed tire inserts from Just Scalin 3D on Thingieverse
@brentlykins72818 ай бұрын
Some insane stuff there 👏🏻👏🏻🔥🔥
@rcmagnet8 ай бұрын
Thank you 😊
@Danielbright19788 ай бұрын
Just ordered my second set of these. First set went on my wife's Negative G build right at 6 pound's. Made an amazing night and day difference. Going to put the other set on my Gspeed build about half a pound heavier than my wife's rig because of full set of aluminum Vanquish Currie F9 portals. Running plastic version on her rig.
@rcmagnet8 ай бұрын
Thats awesome!!! They made my truck go up a level as well!!! :)
@Danielbright19788 ай бұрын
@@rcmagnet You are playing at Boss level in this video sir!!
@rcmagnet8 ай бұрын
@@Danielbright1978 😆 thank you
@Rebelcon_RC8 ай бұрын
Did you vent the tires? Awesome climbing 🙌🏽
@rcmagnet8 ай бұрын
Thank you! :) Yes tires are vented
@GeddyRC8 ай бұрын
That wall crawl was insane! I just put mine on last night, can’t wait to run em this weekend. It’s a Capra so nothing like these rigs but it still is a great crawler.
@rcmagnet8 ай бұрын
Thank you sir! That local line is known as “the shark fin” and good tire/foam combo is the key to pull it
@lowslowcrawlers13049 ай бұрын
I ordered mine. Been waiting a long time for 1.9 pin tires thx powerhobby
@rcmagnet9 ай бұрын
Awesome! You will like them
@havocmwf9 ай бұрын
I dont undertand why you made a melt a hole in the ends of the yellow strap when the ends already had a hole that you just took time making. I will be making mine soon in a similar fashion. Thanks for the video.
@rcmagnet9 ай бұрын
I didnt want to cram the strap into the shackle because of its small opening. I made a hole so it looks a little neater. Melted it because material is synthetic and its becomes a hole that wont fray around. Thank you for watching!!! :)
@dublindutch63469 ай бұрын
this is soo awesome :)
@rcmagnet9 ай бұрын
Thank you :)
@CAPRAQUEENRC10 ай бұрын
That looks amazing, great idea and design ❤ I thought about doing this to mine a long time ago but started the drag link and steering link flip instead. I get more clearance but nowhere as much as that.
@rcmagnet10 ай бұрын
Thank you!!! This is not full BTA steer but that will be next! And of course any extra clearance you can get helps so you made the right move on yours regardless
@CAPRAQUEENRC10 ай бұрын
@@rcmagnet I just made one of my RYFTs a full BTA after watching this video. Will be posting vids soon ❤️
@rcmagnet10 ай бұрын
Awesome! I’d to see your video and how you did it!!!
@Monkeypoorbaby Жыл бұрын
❤😮😮😮
@GHOSTRACING-b5j Жыл бұрын
Does it work ???
@rcmagnet Жыл бұрын
Yep! 😆
@GHOSTRACING-b5j Жыл бұрын
My pinyon has a bit broke off in it will it work still ???
@rcmagnet Жыл бұрын
It’ll even work if your set screw is stripped. You will have to punch it several times but it’ll work. I’ve done it a couple of times where there was rust and the set screw was stripped completely. Lost cause in other words but not anymore!!!
@speedslidesandspeedrides172829 күн бұрын
@@rcmagnet can use motor again then
@rcmagnet29 күн бұрын
@@speedslidesandspeedrides1728 yes you can!
@Rimrock300 Жыл бұрын
Many amazing custom built trucks showing up to these expos. the hobby looks to have taken off in North America for real now the last 5 years
@rcmagnet Жыл бұрын
This segment of the hobby is definitely gaining momentum! :)
@pixelstift Жыл бұрын
hello, which axel housing are those?
@pixelstift Жыл бұрын
okay i found the answer myself...vanquish. ;)
@rcmagnet Жыл бұрын
Hey there. Yes sir! Vanquish
@pandacrawler6x6 Жыл бұрын
Cool Mod! Thks for the share! Loved and Subscrived! Greatings from Portugal!
@rcmagnet Жыл бұрын
Thank you sir! :)
@pandacrawler6x6 Жыл бұрын
@@rcmagnet 🐼👍
@pandacrawler6x6 Жыл бұрын
Naice Vídeo! Thks for share!
@CLAUDIOSRC9529 Жыл бұрын
great great video
@rcmagnet Жыл бұрын
Thank you sir! :)
@nicolaemates Жыл бұрын
Great Idea with that ribbon. I was looking for a scale looking strap like that. Thank you
@rcmagnet Жыл бұрын
Thank you sir! Glad to help
@bankbkenjoychannel5910 Жыл бұрын
👍👍nice❤❤❤
@jacobwright4568 Жыл бұрын
Any insight for me on how to get started building machines like these by hand?
@rcmagnet Жыл бұрын
I feel this question will be answered much better in Facebook groups. Others can chime in and show what they have built and now
@Rimrock300 Жыл бұрын
Keywords; lathe and mill for metal, tools for working with sheetmetal, soldering, knowledge of CAD design for creation of 3D printed parts and designing models, knowledge of rc equipment. To create these models from scratch involves quite some knowledge, skills and a more or less well equipped tool shop. One might get by with some less fancy tools. Many who are into this kind of scratch building are ofte mechanics, craftsmen, engineers by proffession, but there are also selftought people.
@jacobwright4568 Жыл бұрын
@@Rimrock300 I’m an operating engineer by trade so i don’t know if that counts for anything lol. I took Industrial maintenance at my vocational school and do have some experience with cad. Only problem is I don’t have the workshop for it
@nicolasberthon17882 жыл бұрын
Coucou 😉🖐️. Superbe!! Again and again..!!👍 Merci. See you soon yours next vidéos. Nicolas from France 😉🖐️
@maipoe5882 Жыл бұрын
Ji
@rcmagnet Жыл бұрын
Thank you sir! 😊
@garnetnelson14192 жыл бұрын
No links? 🤦🏽♂️
@YODAMAN52 жыл бұрын
AWESOME.
@rcmagnet2 жыл бұрын
Thank you :)
@nigelsteven18842 жыл бұрын
even a drag line....wow...this is mad😁
@rcmagnet2 жыл бұрын
Yeah man the convention is simply amazing!!!
@dustywelchcraneman6614 Жыл бұрын
Best make it a point to get out there in January! There's going to be more draglines and even shovels!
@richardford67522 жыл бұрын
😀 þrðmð§m
@noelwarner12352 жыл бұрын
Where was this at I would love to go to something like this
@rcmagnet2 жыл бұрын
This was at Lebanon PA on Jan 14-15. If you can get there I highly recommend. Its an amazing event!!! It’ll probably take place again next year around the same time
Пікірлер
does it damage the shaft
Pinion can lightly scratch it but its insignificant so no
@@rcmagnet ok
What the hell is that called
This is a center or pilot hole punch
This dude=life saver haha
Glad it helped you :)
What foam do you recommend for that tire?
I have 3d printed tire inserts from Just Scalin 3D on Thingieverse
Some insane stuff there 👏🏻👏🏻🔥🔥
Thank you 😊
Just ordered my second set of these. First set went on my wife's Negative G build right at 6 pound's. Made an amazing night and day difference. Going to put the other set on my Gspeed build about half a pound heavier than my wife's rig because of full set of aluminum Vanquish Currie F9 portals. Running plastic version on her rig.
Thats awesome!!! They made my truck go up a level as well!!! :)
@@rcmagnet You are playing at Boss level in this video sir!!
@@Danielbright1978 😆 thank you
Did you vent the tires? Awesome climbing 🙌🏽
Thank you! :) Yes tires are vented
That wall crawl was insane! I just put mine on last night, can’t wait to run em this weekend. It’s a Capra so nothing like these rigs but it still is a great crawler.
Thank you sir! That local line is known as “the shark fin” and good tire/foam combo is the key to pull it
I ordered mine. Been waiting a long time for 1.9 pin tires thx powerhobby
Awesome! You will like them
I dont undertand why you made a melt a hole in the ends of the yellow strap when the ends already had a hole that you just took time making. I will be making mine soon in a similar fashion. Thanks for the video.
I didnt want to cram the strap into the shackle because of its small opening. I made a hole so it looks a little neater. Melted it because material is synthetic and its becomes a hole that wont fray around. Thank you for watching!!! :)
this is soo awesome :)
Thank you :)
That looks amazing, great idea and design ❤ I thought about doing this to mine a long time ago but started the drag link and steering link flip instead. I get more clearance but nowhere as much as that.
Thank you!!! This is not full BTA steer but that will be next! And of course any extra clearance you can get helps so you made the right move on yours regardless
@@rcmagnet I just made one of my RYFTs a full BTA after watching this video. Will be posting vids soon ❤️
Awesome! I’d to see your video and how you did it!!!
❤😮😮😮
Does it work ???
Yep! 😆
My pinyon has a bit broke off in it will it work still ???
It’ll even work if your set screw is stripped. You will have to punch it several times but it’ll work. I’ve done it a couple of times where there was rust and the set screw was stripped completely. Lost cause in other words but not anymore!!!
@@rcmagnet can use motor again then
@@speedslidesandspeedrides1728 yes you can!
Many amazing custom built trucks showing up to these expos. the hobby looks to have taken off in North America for real now the last 5 years
This segment of the hobby is definitely gaining momentum! :)
hello, which axel housing are those?
okay i found the answer myself...vanquish. ;)
Hey there. Yes sir! Vanquish
Cool Mod! Thks for the share! Loved and Subscrived! Greatings from Portugal!
Thank you sir! :)
@@rcmagnet 🐼👍
Naice Vídeo! Thks for share!
great great video
Thank you sir! :)
Great Idea with that ribbon. I was looking for a scale looking strap like that. Thank you
Thank you sir! Glad to help
👍👍nice❤❤❤
Any insight for me on how to get started building machines like these by hand?
I feel this question will be answered much better in Facebook groups. Others can chime in and show what they have built and now
Keywords; lathe and mill for metal, tools for working with sheetmetal, soldering, knowledge of CAD design for creation of 3D printed parts and designing models, knowledge of rc equipment. To create these models from scratch involves quite some knowledge, skills and a more or less well equipped tool shop. One might get by with some less fancy tools. Many who are into this kind of scratch building are ofte mechanics, craftsmen, engineers by proffession, but there are also selftought people.
@@Rimrock300 I’m an operating engineer by trade so i don’t know if that counts for anything lol. I took Industrial maintenance at my vocational school and do have some experience with cad. Only problem is I don’t have the workshop for it
Coucou 😉🖐️. Superbe!! Again and again..!!👍 Merci. See you soon yours next vidéos. Nicolas from France 😉🖐️
Ji
Thank you sir! 😊
No links? 🤦🏽♂️
AWESOME.
Thank you :)
even a drag line....wow...this is mad😁
Yeah man the convention is simply amazing!!!
Best make it a point to get out there in January! There's going to be more draglines and even shovels!
😀 þrðmð§m
Where was this at I would love to go to something like this
This was at Lebanon PA on Jan 14-15. If you can get there I highly recommend. Its an amazing event!!! It’ll probably take place again next year around the same time
Sick!
Thanks! :)
DUDE! AWESOME! I'm gonna make me some soon!
Cool! Id like to see when they are done
I see my truck 🥳🥳🕺🏾 nice video
Thank you! Glad I got it in!
@@rcmagnet E.C.M.T next March 12
@@thewizard1196 thank you! Will look into that
@@rcmagnet 8