Пікірлер

• 
  @EmLouise-wo5gv4 күн бұрын

  Just wondering what paint you used to paint the aviary? Struggling to find a bird safe paint in Australia. Thanks ☺️

• 
  @AdventurePrimal4 күн бұрын

  @@EmLouise-wo5gv hi. I just used standard water based exterior paint. It hasnt harmed them.

• 
  @eventhorizonbm16 күн бұрын

  Nice! Only thing I would do differently is instead of joining the separate pieces of mesh with wire, I would have added another full length of the aluminum tubing to back/secure each piece(upper and lower) individually, avoiding any overlap and adding a bit more integrity.

• 
  @AdventurePrimal16 күн бұрын

  yes. That's good advice. Thanks for watching and commenting.

• 
  @markfordham103027 күн бұрын

  someone told me the other day that the tackle shop has now closed? any info on that?

• 
  @AdventurePrimal27 күн бұрын

  sorry i havent been there for awhile to confirm that.

• 
  @bruceharrison785913 күн бұрын

  Yes it has

• 
  @1LongrangerАй бұрын

  Decent 5083 H116 alloy does not do this.

• 
  @1LongrangerАй бұрын

  Telwater product? Early millennium hulls were terrible.

• 
  @TuanMinhPhuАй бұрын

  Hello Adventure Primal , can you tell me where i can land base fishing around Redcliffe please .Thank you for your time .

• 
  @AdventurePrimalАй бұрын

  I haven't fished many land based locations but I have heard the rock areas off groins on north or south ends of the beaches produce. Have a look at a map to see those locations. Queens beach North for example. Scott's Point but be careful of the green zone there. You can only fish these on high tides as there generally isn't enough water otherwise. Sunrise and sunsets are also best timings.

• 
  @TuanMinhPhuАй бұрын

  @@AdventurePrimal .Scott's Point is just a normal name. Out of 10 people, there is only 1 get fish . Thank you for your time and your explain.

• 
  @marilynlockethefurmum6039Ай бұрын

  How do u clean the floor of that aviary?

• 
  @AdventurePrimalАй бұрын

  A weekly rake off of the top layer. Then apply new sand topup when it gets low.

• 
  @aceavram712Ай бұрын

  How did you patch those corrosion holes?

• 
  @darrynbowden3290Ай бұрын

  I had them cleaned and then welded up

• 
  @Royden58Ай бұрын

  Best boat is someone else’s

• 
  @JohnnysCafe_2 ай бұрын

  Shopping trollys? i am guessing that was thugs, they have become trolly reefs now so something good came if it.

• 
  @AdventurePrimal2 ай бұрын

  There was a coles close to there at one stage. Yes turning into a reef now

• 
  @JohnnysCafe_2 ай бұрын

  @@AdventurePrimal I see, thank you, and great footage 👍

• 
  @AdventurePrimal2 ай бұрын

  @@JohnnysCafe_ thanks for watching

• 
  @BeauDibble2 ай бұрын

  Stunning job done I would have made it wider but apart from that really good job

• 
  @AdventurePrimal2 ай бұрын

  Thanks for watching and commenting.

• 
  @tessamaddern13922 ай бұрын

  I done a rookie mistake with mine and put the snorkel on etc and totally forgot about all the inner pipe work, can you do that with the snorkel on the car? or will I need too take it off again??

• 
  @AdventurePrimal2 ай бұрын

  You might have to undo it a little to give yourself some room to fit the pipes into the snorkel.

• 
  @miguelsaludes33692 ай бұрын

  Never build an aviary by your house,always separate,bird mites will eventually go inside your home and you will have to leave and tent your home at least twice,also throw all your bedding and upholstered furniture away and buy new ones.

• 
  @AdventurePrimal2 ай бұрын

  Ok. That doesnt sound good

• 
  @user-je1li9zz9f2 ай бұрын

  Hi mate, great video! What did you use to fix the mesh onto the aluminium tubes? Are they rivet nuts from Bunnings? Cheers!

• 
  @AdventurePrimal2 ай бұрын

  Gday. Thanks for watching. I had some flat strips of aluminium that i cut up into 30mm strips and then rivotted them over the mesh to the tubes. Theres propabably other ways to do it but thats what i had available at the time.

• 
  @MrGavo19782 ай бұрын

  Insane place - whats the best time of year to get up there?

• 
  @AdventurePrimal2 ай бұрын

  I think mid winter during slack tides would be goood but if your after barra, then youll have to go when its warmer...say spring. Summer is very hot

• 
  @MrGavo19782 ай бұрын

  @@AdventurePrimal awesome thanks! What about GT, Spanish, Goldens etc?

• 
  @AdventurePrimal2 ай бұрын

  @@MrGavo1978 i cant say ive caught any the times ive been there to tell you truthfully but id think they be around always

• 
  @MrGavo19782 ай бұрын

  @@AdventurePrimal legend!! Great channel btw

• 
  @insurancebrokersnewcastles13183 ай бұрын

  Your videos are always a joy to watch.

• 
  @AdventurePrimal3 ай бұрын

  Thanks for watching and commenting

• 
  @nowirehangers28153 ай бұрын

  Are the joiners plastic? Please thanks

• 
  @AdventurePrimal3 ай бұрын

  Yes they are plastic

• 
  @stevethomas72733 ай бұрын

  So the Penn 950 can handle most fish at Lucinda?

• 
  @AdventurePrimal3 ай бұрын

  Yes its a good reel

• 
  @Loveitorleaveit7773 ай бұрын

  Thank you so much for the video and instructions. It would be so much nicer without the music. Just my opinion. But, thank you for a great video.

• 
  @kayleighdavies11354 ай бұрын

  This is amazing! Happy birds! Well done. I love a project !

• 
  @AdventurePrimal4 ай бұрын

  Thanks for watching and commenting

• 
  @uknighted44194 ай бұрын

  Did you have any problems with noise or movement when on the water?

• 
  @AdventurePrimal4 ай бұрын

  no issues there. i did put some padding on the underside of the timber where it came into contact with the hull. I used cement board. This provided something for the timber to sit on rather than rub on the hull. this may have helped with the noise as well.

• 
  @orlandomendoza75054 ай бұрын

  Thanks for this video. Did you have to bolt it or clamp it down or are they just sitting loose?

• 
  @AdventurePrimal4 ай бұрын

  I just have it sitting loose so its easy to remove and clean underneath when required. thanks for watching.

• 
  @orlandomendoza75054 ай бұрын

  @@AdventurePrimal thanks for replying. I have a boat that I purchased about 6 weeks ago that looks just like that one so your video is just what I was looking for. 🤙

• 
  @user-dl4dn5th3c4 ай бұрын

  Sorry you did a great job except the back I would have put a solid backing instead of the mesh ,over time it is going to fill with rubbish and you will not be able to remove it,

• 
  @AdventurePrimal4 ай бұрын

  Yes that is correct. It is building up with seeds

• 
  @user-dl4dn5th3c4 ай бұрын

  @@AdventurePrimal Sorry to bring it up I did the same mistake,

• 
  @genevievelai22314 ай бұрын

  Thanks for the tips

• 
  @AdventurePrimal4 ай бұрын

  no problem. Have a good one if youre going there.

• 
  @oztrekgelsoft84094 ай бұрын

  Nice review brother 👌 I went and got me one today because of this much appreciated Coomera river it should Work well💪

• 
  @AdventurePrimal4 ай бұрын

  no problem. Its a nice little unit.

• 
  @runeapples4 ай бұрын

  Majestic as fuck. 8:39 great memories.

• 
  @gregeberhardt17115 ай бұрын

  awesome vid! Quick question....Are they fishing "quick dry" pants ? if so where from?

• 
  @AdventurePrimal5 ай бұрын

  Thanks. They are comfortable quick dry pants. I got them from sun2seauvprotection.com.au

• 
  @lesboucher5425 ай бұрын

  Great video and very helpful. I can't help wondering if it would be a better idea to attach the mesh to the frame before it goes up as it would save a bit of fiddling... Just a thought.

• 
  @AdventurePrimal5 ай бұрын

  Yes it may have saved some time. Thanks for watching and commenting.

• 
  @mosca9tails5 ай бұрын

  How thick were the wires? what gauge?

• 
  @AdventurePrimal5 ай бұрын

  Sorry. I dont remember the guage. Its the standard avairy mesh

• 
  @user-wm6bk3in3h5 ай бұрын

  there are so many issues with this build that are toxic to parrots and this not auitable at all

• 
  @michaelmanning31005 ай бұрын

  Why is it toxic to parrots just curious?

• 
  @nowirehangers28153 ай бұрын

  It isn’t toxic at all

• 
  @user-wm6bk3in3h3 ай бұрын

  @@nowirehangers2815 yes it is the mesh and wood is toxic

• 
  @user-wm6bk3in3h3 ай бұрын

  @@michaelmanning3100 so galvanised mesh is toxic due to the zinc. and any sort of wood treatment is toxic to parrots including pressured wood

• 
  @peace4peaceful5 ай бұрын

  I had boats for 30 years. I have had lazy times but never had corrosion from debris. I've been searching a lot lately as I bought a boat with 28 rivets or screws on the underside. I ripped everything out. I believe it to be electrosis. At the back the battery tray was fairly corroded at each screw point. The boat owner must have fitted them using a different metals. Dissimilar metals the experts say. Add salt water or even freshwater and electrosis with start. The other problem...and boat yards do this according to an auto electrician... is caused by earthing the electronics to the hull not back to the battery. A friend of mine had a screw fall out near the cigarette lighter. A wire earthed the boat. Now he has to get it cut back and welded. Washing your boat is exactly the right thing to do. As is keeping it dry. But, if you get more holes check all screws have been fitted with tef-gel or another type of barrier sikaflex maybe? Along with electrical wires being in good condition and earthed to the battery.

• 
  @AdventurePrimal5 ай бұрын

  Thanks for that. Yes im getting holes again. Im going to pull everything out in winter and have a look. I believe it electrolysis. Ill go thorough the wiring and give everything a good clean. Spray the inside of the hull with some sort of corrosion protection. Try and slow down tbese holes hey

• 
  @peace4peaceful5 ай бұрын

  @@AdventurePrimal yep. I always believed if you use stainless screws it's ok. Not so from my research. Any screw needs to have tef gel..there's another brand I can't remember the name of..or they can start corrosion. Your boat is painted. So you should see bubbled paint near or around the fitting. You can test for electrosis with a volt meter so I read. Put the positive against the hull or point of corrosion and earth the neutral. The voltmeter should read zero. If not you have electrosis. I've read once you have it ya stuck. But I know guys who cut the corrosion out renewed with a patch and it was fine after that. Good luck with it all. Oh, anywhere indifferent metals touch there should be a barrier. It's the reason you see rubber under the ribs on the hull. All it needs is salt water and it can start.

• 
  @miketran22946 ай бұрын

  Where we buy frames of aviary, thanks

• 
  @AdventurePrimal6 ай бұрын

  I got mine at an aluminium supplier

• 
  @miketran22946 ай бұрын

  Thanks for shared, do you remember name of aluminum supply ?

• 
  @AdventurePrimal6 ай бұрын

  @@miketran2294 i got mine at Action Aluminium in Geebung QLD

• 
  @miketran22946 ай бұрын

  @@AdventurePrimal thank a lot

• 
  @swannydanger6916 ай бұрын

  What hole saw do you use? i have a wood one. Just wondering if it’s good enough for the job. thanks

• 
  @AdventurePrimal6 ай бұрын

  Yeah. I used a wood one. It will work but it will blunt it. You should get a metal cutting one if you have the time though

• 
  @saadrwaili77016 ай бұрын

  We're you pay the mtreal from

• 
  @AdventurePrimal6 ай бұрын

  An aluminium supplier nearby

• 
  @KaspaAus6 ай бұрын

  hey mate, where abouts did you head off from to get there?

• 
  @AdventurePrimal6 ай бұрын

  Scarborough harbour. Bribie would be a little closer i think

• 
  @KaspaAus6 ай бұрын

  Yeah awesome. I always put in at Scarborough, but generally stay western side of Moreton if we aren’t hanging around Redcliffe. Have you had any troubles heading around the cape from Scarborough?

• 
  @AdventurePrimal6 ай бұрын

  @@KaspaAus no as i only go out that way when the weather is looking good

• 
  @KaspaAus6 ай бұрын

  @@AdventurePrimal awesome mate. Yeah I won’t go out over 10kn, I know it can pretty shit out there. Just thought I’d ask because on Navionics it looks to be the same sort of ground as South Bar, but different directions and a bit deeper. Great videos btw! Thanks mate,

• 
  @AdventurePrimal6 ай бұрын

  @@KaspaAus i dont think it as bad as south bar. Just the combi section that can get bad. Thanks for watching.

• 
  @garykuiper60306 ай бұрын

  Your Lucky Mate. When mine acted the same. But....When I got mine broke loose I had all kinds of Chips from my Stator, which I am waiting for a New Stator! Good luck.

• 
  @jonicarlson79506 ай бұрын

  Looks great!

• 
  @melissadimer57227 ай бұрын

  That look boss 😊 also very simple to make, you sure did yourself proud 👏🏽 Great job well done mate 👍🏽 👏🏽 😀 🙌🏽 🇦🇺 🪃

• 
  @AdventurePrimal7 ай бұрын

  Thanks for the comment and watching.

• 
  @PlumJum7 ай бұрын

  The wife looked as entertained as when i took mine out 😂😂😂 Haha fishing must be a mens only hobby

• 
  @AdventurePrimal7 ай бұрын

  I dont kbow why not as many women like it hey.

• 
  @randyguadalupe10297 ай бұрын

  Is that rivet you use to pasten the mesh wires? The plastic connectors are great. Where did you buy them?

• 
  @AdventurePrimal7 ай бұрын

  the local aluminium supplier kept them there for that reason. It didnt take much convincing to buy them when i bought the aluminium tube. It made the job alot easier.

• 
  @CamBill_ROBLOX7 ай бұрын

  That’s really cool mate 👍👍👍👍👍👍

• 
  @AdventurePrimal7 ай бұрын

  thanks for watching again Cam

• 
  @CamBill_ROBLOX7 ай бұрын

  Awesome mate nice little place there 👍👍👍👍👍

• 
  @AdventurePrimal7 ай бұрын

  Thanks for watching always Cam. It was a suprise place.

• 
  @ImtiyazShaikHussain7 ай бұрын

  What measures do you take to protect the birds from rough weather (Winter, rain and very hot days)?

• 
  @AdventurePrimal7 ай бұрын

  Im lucky as i live next to the coast so the temp range is smAll and it doesnt get too cold. With it being built under my back deck, it doesnt get rain in there and the deck keeps the sun off in summer.

• 
  @ImtiyazShaikHussain7 ай бұрын

  This is Super cool, mate. Love the idea of adding quails to the party 😊

• 
  @mahmudrahman98557 ай бұрын

  Thank you 😊 May Allah bless you more

• 
  @Foxy_Boy_1237 ай бұрын

  Hey mate, just wondering if you could suggest any good fishing spots on the Western side of Moreton Island near the resort? I’m going there for a quick trip in early January, have never gone and want to take some rods. Also, what is the best bait that you would recommend? Cheers, mate.

• 
  @AdventurePrimal7 ай бұрын

  Hey there. You can fish for whiting and flathead to the south of the resort off the beach. I heard fishing off the Tangalooma jetty can produce pelagics and other assortments of fish at times but ive never fished yhere to confirm times and baits.

• 
  @Foxy_Boy_1237 ай бұрын

  Ok thank you. @@AdventurePrimal

• 
  @nicbrown42727 ай бұрын

  No it won’t. If you want the corrosion to stop you need a barrier between the aluminium and everything else. Clean all ally then spray everything with Lanotec hd lanolin

• 
  @AdventurePrimal7 ай бұрын

  Thanks Nic. Yes barrier protection is a good tip

• 
  @aarondavis90447 ай бұрын

  My pop had 1 very similar exact same colours to , he had a 9.8hp tohatsu on his

• 
  @AdventurePrimal7 ай бұрын

  Nice. That was a good little engine hey

• 
  @aarondavis90447 ай бұрын

  @AdventurePrimal yeh went pretty good 👍

• 
  @CamBill_ROBLOX7 ай бұрын

  Cool 👍👍👍👍👍👍

• 
  @CamBill_ROBLOX8 ай бұрын

  Awesome 👍👍👍👍

• 
  @AdventurePrimal8 ай бұрын

  Thank Cam