Bravo. I come across those business strategy by making desk research in economy such as ABC analyze, JIt ( just in time ) FIFO, FILO, Lean and Six Sigma. They are all the in basic company economy book.
@Live_ByGraceАй бұрын
Thank you very helpful
@knowledgefactory-leansixsi2123Ай бұрын
Glad it helped
@user-qy2rj6pm3wАй бұрын
Computer by itself created inventions. This is written on the Internet.
@albertoforbesalas9227Ай бұрын
Thank you ! Very Usefull
@knowledgefactory-leansixsi2123Ай бұрын
Glad it was helpful!
@claudiamendes79722 ай бұрын
Really well explained 😊
@knowledgefactory-leansixsi21232 ай бұрын
Glad it was helpful!
@emilesebakara27232 ай бұрын
I thank you for this relevant teaching material.
@knowledgefactory-leansixsi21232 ай бұрын
You are very welcome
@pane21252 ай бұрын
Nice and concise!
@knowledgefactory-leansixsi21232 ай бұрын
Glad it was helpful!
@robrichmond67862 ай бұрын
The background music and the generated voice deteriorate from the information presented. Dump the music and use a real person to narrate.
@magedhussain11432 ай бұрын
Thank you very much
@knowledgefactory-leansixsi21232 ай бұрын
You are welcome
@magedhussain11432 ай бұрын
Thank you alot for simplisty and valuable information
@knowledgefactory-leansixsi21232 ай бұрын
Glad it was helpful!
@deanopenn3 ай бұрын
what happens if bias fails but cgk is good in a type 1 study
@knowledgefactory-leansixsi2123Ай бұрын
Type 1 gage study is to evaluate both effect of bias and repeatability.In this case,the measurement variation or repeatability has better performance.You can further perform bias and linearity study to further confirm the accuracy.
@nosporai3 ай бұрын
the background music ruined all ! No need for it
@knowledgefactory-leansixsi21233 ай бұрын
Thanks for the feedback
@TCoceans3 ай бұрын
please how did you obtain the values in the column "yield"?
@knowledgefactory-leansixsi21233 ай бұрын
The yield is obtained through data collection.The formula is good units divided by total quantity.
@health21003 ай бұрын
It's seems as if TRIZ a specific application of the game theory
@knowledgefactory-leansixsi21233 ай бұрын
Yes,TRIZ could be used to generate some innovative ideas for Game design
<<<a cool video keep up the great content.. Thank you…….
@knowledgefactory-leansixsi21236 ай бұрын
Thanks, will do!
@magicworldbyjorg6 ай бұрын
@@knowledgefactory-leansixsi2123 Thank you very mutch... have a nice Start of the week.... see you….
@harrisonkrieger90197 ай бұрын
god bless your soul i had no idea what the difference was thank you so much
@knowledgefactory-leansixsi21237 ай бұрын
Glad it helped!
@knowledgefactory-leansixsi21237 ай бұрын
Understand the difference between Lean and Six Sigma in 5 minites kzread.info/dash/bejne/hYaA2ap9lam-hdI.htmlsi=znlCHe_0lvfNEV-y #leansixsigma #project #kaizen
@mykelfashonhous10379 ай бұрын
Hello Dear ., My name is Emon and I am a professional digital marketer and KZread video SEO expert. and are you struggling with subscriber and video views for monetization? I was analysing your KZread channel Below we found your channel issue: I have come across some videos from your KZread channel, and I must say that you are doing an excellent job. Every video I watched was engaging and well-made. However, I noticed a lack of engagement in the form of likes and comments on your videos.According to your channel, I noticed that your channel videos are not viewed and subscribed.You need to optimize your channel and do video SEO to reach your target. Otherwise, if you upload videos to your channel throughout the year, none of your videos will get viral views.There seem to be several issues that I have been trying to identify, such as SEO optimization, ranking tags, and tag volume. It appears that these aspects have not been properly addressed.If these problems are solved your channel will get rank and video will go viral and the channel will grow.
@migangurvaz78189 ай бұрын
Hi! Thanks for the video, great guidance!. . . Question: What do you do if your data has a lognormal distribution, but it fails the stability aspect? The data has points outside the control limits
Hello, how is MSA (Measurement System Analysis) conducted on parts where destructive testing is performed? There are controls where we can’t reinspect the part. What kind of method do you apply?
@knowledgefactory-leansixsi21239 ай бұрын
You need to use GR&R nested method for destructive testing
@omerzambak41099 ай бұрын
Could you tell us briefly, master?@@knowledgefactory-leansixsi2123
@hemantpardikar62989 ай бұрын
TRIZ is a branch of logic which focuses on resolving contradictions or conflicts. This distinguishes it from other creativity methods where Ideation is done with help of brainstorming. The other strength of TRIZ is patterns of technology evolution which are very generic and can help in predicting shape of things to come.There were 9 major trends identified by Altschuller and there are many subtrends.
@knowledgefactory-leansixsi21239 ай бұрын
Agreed with you
@user-md2in8by5b10 ай бұрын
WELL DONE
@knowledgefactory-leansixsi21239 ай бұрын
Thanks for your watching
@aball843210 ай бұрын
"promo sm"
@forddon10 ай бұрын
The video could have been funny cat tricks and it would have been just as relevant to the dialogue. In real life the focus on SMED is the kind of annoying stupidity that disconnected managers inflict on the plant floor workers who have enough problems to worry about already.
@knowledgefactory-leansixsi212310 ай бұрын
Overall equipment efficiency(OEE) in Lean Manufacturing kzread.info/dash/bejne/pnp-y7KbZdjTf5s.html
@el_priet0kun37311 ай бұрын
So defective is the plural version of defective? Interesting
@vakikimini713911 ай бұрын
You should make the intro shorther and get straight ti the pount other than that i like the videos
@water796211 ай бұрын
you should put the captions higher up so we can see it without the subscribe button and your name in the way
@WREFMAN11 ай бұрын
😴
@shamiliqbal297911 ай бұрын
This is what I am looking for. Took a lot of screen shot for reference. Thanks a lot.
@lacidescastillo486611 ай бұрын
Straightforward concepts to be captured easily., Thank you
@sirozia7185 Жыл бұрын
Thank you very much, the video helped me <3
@knowledgefactory-leansixsi21239 ай бұрын
You're welcome!
@domenicoscarpino3715 Жыл бұрын
Does the process z shown in the table refer to long term sigma?
@domenicoscarpino3715 Жыл бұрын
Hi, thanks for the video. How does the concept (and the formulas) in cpk change in case we have a nominal target value?
@user-dt7se8xf8l Жыл бұрын
So helpful! Thank you!
@knowledgefactory-leansixsi2123 Жыл бұрын
Glad it was helpful!
@ahmeddiab8860 Жыл бұрын
Thanks for your valuable information but music background make some noise
@knowledgefactory-leansixsi2123 Жыл бұрын
Sorry for that
@user-ke6wl7xq2h Жыл бұрын
As the example in video, how to determine and assume the population standard deviation is 360 sec? in pratically, that should be based on baseline? or other reference?
@dhandrat Жыл бұрын
Helpful ! Thanks !
@knowledgefactory-leansixsi2123 Жыл бұрын
Glad it helped!
@usmanmuhammad4164 Жыл бұрын
You teached in more detail than my teacher. Thank youuuuuuu
@knowledgefactory-leansixsi2123 Жыл бұрын
Glad to hear that!
@agradhanurwedhasakti4865 Жыл бұрын
Great explanation, however, I am still confused on the "repeatability" part. Both Type1 Gage Study and Gage R&R determine the repeatability, is there any difference between the Type 1's repeatibility and the GR&R's repeatability?
@ciconsultingservices17 күн бұрын
A Type I Gage Study measures "pure" variability from the measurement device by taking repeated measurements on the same part. If the Type I Gage Study is not acceptable, then the MSA result will not be acceptable, so a Type I Gage Study should be done first to save time. If the Type I Gage Study is acceptable then you can do a MSA that takes into account the variability due to the device, the environment, the procedure, the parts, and the operator - all parts of the measurement system. When evaluating an MSA for repeatability, it gives you an indication of how the system performs, not just the measurement device.
@Do_a_lot_man Жыл бұрын
Execellent and great ! but Too much limited, and can't for beginner
@Do_a_lot_man Жыл бұрын
Thank you much !
@vikramreddy3699 Жыл бұрын
how did you get the SD 2.45?
@manikammani272 жыл бұрын
Thanks for the video. My doubts are cleared
@knowledgefactory-leansixsi2123 Жыл бұрын
Glad to hear that
@iman1983ify2 жыл бұрын
EXCELLENT .
@knowledgefactory-leansixsi21232 жыл бұрын
Many thanks!
@coleoneil85402 жыл бұрын
Thanks
@knowledgefactory-leansixsi21232 жыл бұрын
Welcome
@volfsonoleg2 жыл бұрын
Hello How the type one gage calculation is done of the tolerance is one sided
Пікірлер
Bravo. I come across those business strategy by making desk research in economy such as ABC analyze, JIt ( just in time ) FIFO, FILO, Lean and Six Sigma. They are all the in basic company economy book.
Thank you very helpful
Glad it helped
Computer by itself created inventions. This is written on the Internet.
Thank you ! Very Usefull
Glad it was helpful!
Really well explained 😊
Glad it was helpful!
I thank you for this relevant teaching material.
You are very welcome
Nice and concise!
Glad it was helpful!
The background music and the generated voice deteriorate from the information presented. Dump the music and use a real person to narrate.
Thank you very much
You are welcome
Thank you alot for simplisty and valuable information
Glad it was helpful!
what happens if bias fails but cgk is good in a type 1 study
Type 1 gage study is to evaluate both effect of bias and repeatability.In this case,the measurement variation or repeatability has better performance.You can further perform bias and linearity study to further confirm the accuracy.
the background music ruined all ! No need for it
Thanks for the feedback
please how did you obtain the values in the column "yield"?
The yield is obtained through data collection.The formula is good units divided by total quantity.
It's seems as if TRIZ a specific application of the game theory
Yes,TRIZ could be used to generate some innovative ideas for Game design
So chat gpt is master black belt in six sigma
Chat gpt could be assistant for MBB
kzread.info/dash/bejne/nYul0bN9ade1fbw.htmlsi=FFkDOSKXhy8b9O7e
<<<a cool video keep up the great content.. Thank you…….
Thanks, will do!
@@knowledgefactory-leansixsi2123 Thank you very mutch... have a nice Start of the week.... see you….
god bless your soul i had no idea what the difference was thank you so much
Glad it helped!
Understand the difference between Lean and Six Sigma in 5 minites kzread.info/dash/bejne/hYaA2ap9lam-hdI.htmlsi=znlCHe_0lvfNEV-y #leansixsigma #project #kaizen
Hello Dear ., My name is Emon and I am a professional digital marketer and KZread video SEO expert. and are you struggling with subscriber and video views for monetization? I was analysing your KZread channel Below we found your channel issue: I have come across some videos from your KZread channel, and I must say that you are doing an excellent job. Every video I watched was engaging and well-made. However, I noticed a lack of engagement in the form of likes and comments on your videos.According to your channel, I noticed that your channel videos are not viewed and subscribed.You need to optimize your channel and do video SEO to reach your target. Otherwise, if you upload videos to your channel throughout the year, none of your videos will get viral views.There seem to be several issues that I have been trying to identify, such as SEO optimization, ranking tags, and tag volume. It appears that these aspects have not been properly addressed.If these problems are solved your channel will get rank and video will go viral and the channel will grow.
Hi! Thanks for the video, great guidance!. . . Question: What do you do if your data has a lognormal distribution, but it fails the stability aspect? The data has points outside the control limits
kzread.info/dash/bejne/ipmnrdeRedCcg7A.htmlsi=ai0z1WBfzFW8g8r1
Hello, how is MSA (Measurement System Analysis) conducted on parts where destructive testing is performed? There are controls where we can’t reinspect the part. What kind of method do you apply?
You need to use GR&R nested method for destructive testing
Could you tell us briefly, master?@@knowledgefactory-leansixsi2123
TRIZ is a branch of logic which focuses on resolving contradictions or conflicts. This distinguishes it from other creativity methods where Ideation is done with help of brainstorming. The other strength of TRIZ is patterns of technology evolution which are very generic and can help in predicting shape of things to come.There were 9 major trends identified by Altschuller and there are many subtrends.
Agreed with you
WELL DONE
Thanks for your watching
"promo sm"
The video could have been funny cat tricks and it would have been just as relevant to the dialogue. In real life the focus on SMED is the kind of annoying stupidity that disconnected managers inflict on the plant floor workers who have enough problems to worry about already.
Overall equipment efficiency(OEE) in Lean Manufacturing kzread.info/dash/bejne/pnp-y7KbZdjTf5s.html
So defective is the plural version of defective? Interesting
You should make the intro shorther and get straight ti the pount other than that i like the videos
you should put the captions higher up so we can see it without the subscribe button and your name in the way
😴
This is what I am looking for. Took a lot of screen shot for reference. Thanks a lot.
Straightforward concepts to be captured easily., Thank you
Thank you very much, the video helped me <3
You're welcome!
Does the process z shown in the table refer to long term sigma?
Hi, thanks for the video. How does the concept (and the formulas) in cpk change in case we have a nominal target value?
So helpful! Thank you!
Glad it was helpful!
Thanks for your valuable information but music background make some noise
Sorry for that
As the example in video, how to determine and assume the population standard deviation is 360 sec? in pratically, that should be based on baseline? or other reference?
Helpful ! Thanks !
Glad it helped!
You teached in more detail than my teacher. Thank youuuuuuu
Glad to hear that!
Great explanation, however, I am still confused on the "repeatability" part. Both Type1 Gage Study and Gage R&R determine the repeatability, is there any difference between the Type 1's repeatibility and the GR&R's repeatability?
A Type I Gage Study measures "pure" variability from the measurement device by taking repeated measurements on the same part. If the Type I Gage Study is not acceptable, then the MSA result will not be acceptable, so a Type I Gage Study should be done first to save time. If the Type I Gage Study is acceptable then you can do a MSA that takes into account the variability due to the device, the environment, the procedure, the parts, and the operator - all parts of the measurement system. When evaluating an MSA for repeatability, it gives you an indication of how the system performs, not just the measurement device.
Execellent and great ! but Too much limited, and can't for beginner
Thank you much !
how did you get the SD 2.45?
Thanks for the video. My doubts are cleared
Glad to hear that
EXCELLENT .
Many thanks!
Thanks
Welcome
Hello How the type one gage calculation is done of the tolerance is one sided
Type 1 gage study is only for 2 sided tolerance