Good looking soil. Not that red clay crap we have.
@nikosstekas942310 ай бұрын
Το κακομοιρο δεν μπορει
@St705 Жыл бұрын
Just a tip, dig out 2 sides then go 90° and dig the other sides.
@albiggers9348 Жыл бұрын
I tuned in to see you bury a stump. You didn't.
@zairaemireyrodriguezalvara5807 Жыл бұрын
😋🤫😋😋😋😋😋😋han i45hjrv5tc5
@madangowda95172 жыл бұрын
How many cost for this
@JW-us7qh Жыл бұрын
250,000 Nepalese Rupees
@tractortalkwithgary12712 жыл бұрын
I have the L2501 and am really happy with it. I like the metal hood too. I don't take a bowling ball to the woods with me so I didn't need the John Deere. Good job on this review. New subscriber here.
@regs38362 жыл бұрын
I am surprised you didn’t buy a Kubota with a GST transmission. It sounds like the manual is your biggest complaint.
@achanbaokrk60032 жыл бұрын
Sturdy enough to do the work and get it done.
@Elcostagus3 жыл бұрын
That backhoe attachment looks like it does a pretty good job.
@goodboyringo97163 жыл бұрын
2021 ... I'm considering Kubota but Kubota is no where to be found.
@nervousordo3 жыл бұрын
Thanks for sharing your experience with John Deere and larger machinery.
@nervousordo3 жыл бұрын
1:40 The paint will only fade if you keep your $30K+ investment sitting out in the sun all the time.
@dericray96313 жыл бұрын
What up👍
@JW-us7qh3 жыл бұрын
What up.
@brownzg3 жыл бұрын
That review helped me, thank you.
@steveelford973 жыл бұрын
How smooth is that backhoe? And does the thumb work well?
@JW-us7qh3 жыл бұрын
The thumb works good. The backhoe is smooth to a certain extent. Since this MX only has like 9 GPM flow, it’s a little slow. It is smooth for what it is. But like iv said in other videos this is not a commercial backhoe. It’s very handy to have around your property to do a few odd jobs a year with.
@debbiedavis72223 жыл бұрын
my name is steven and i was wounding why you don't like mahindra , by the way i have a kubota l4701
@DrRchannel713 жыл бұрын
nice post, like
@Bigwingrider18004 жыл бұрын
THE DEER HAS MUCH BETTER LIFT CAPABILITY THEN KUBOTA SUB COMPACT. ALMOST DOUBLE...
@MrManic520013 жыл бұрын
Citation needed
@dustinpitts27414 жыл бұрын
Very honesty video I have ran into the same thing looking at tractors John Deere is just riding on the name and out sourcing just about everything on the tractors, for me my dealer would'nt give me the time of day so ok I bought a kubota and happy with it so far;;;;;;
@brianschopp17394 жыл бұрын
What is the part number for the mechanical thumb?
@michaelbrown82444 жыл бұрын
Kubota makes a good tractor, I own a L39 kubota backhoe and really like it. I had a L5240 grand L series with cab it was nice tractor but was so light in the rear I couldn't do much with it in my business. I recently bought a 2607h massey and like it. I know you don't like Massey but it's a old school tractor and it's heavy. Like anything if you can't put the power to the ground your wasting your time. Anyway good video
@ReapWhatYouSeauxLeJeune4 жыл бұрын
Love My Mx 5200 great Tractor. My 3 one
@dustincribb72224 жыл бұрын
Have you tried using your MX5200 with moving round hay bales with front end loader?
@JW-us7qh4 жыл бұрын
Dustin Cribb no I don’t think iv moved any bales with this tractor. I have moved a few large 3x4 square and 4x5 rounds dry hay with a L4600, has less loader capacity and handled the bales real easy. So I’d imagine the MX would handle them even easier than the L.
@311hitwall4 жыл бұрын
Have you had any issues with the MX? Do you have the heavy duty bucket? I was looking at the 5400 but couple of things i am not crazy about - the fuel tank location and the rocker pedal for the hydro. I thought the MX was a heavier tractor than the Grand L series because it has larger front tires but it actually weighs less than a Grand L 5460. The MX is expensive enough when compared to a premium kioti, but the Grand L is ridiculous. Kubota charges extra for stuff that comes standard on other tractors.
@JW-us7qh4 жыл бұрын
I have not had any issues with my MX5200. The tractor has about 110 or 115 hr. I had a code error po336 that popped up several times, the code is easily cleared by using the regen buttons. Once I changed the oil that code clears up and has not appeared again. Your salesman should be able to help find the right tractor for your needs that would work with in your budget. The advantage to Deere is the fuel tank is in the rear but still elevated off the ground on a few comparable models. The advantage of that is adds a little extra weight to the rear considering Deere uses cast iron housing with aluminum rear ends, plastic fenders, fuel tank etc.
@hellogoodbye31293 жыл бұрын
Just get a kioti. 10k less than competitors, higher lift capacity, cheaper to fix and easier. Built at industrial commercial standards. They are literally the Bob cat tractor line painted orange.
@Oliviaswaxtech4 жыл бұрын
That’s the cheapest MX you can get.
@JW-us7qh4 жыл бұрын
Happy Trails Farm Alaska. You must have 10 or 12 of these tractors just sitting around then since they’re so cheap.
@Oliviaswaxtech4 жыл бұрын
No, I am referring to your comment about the transmission. You bought the base model version. If you went with the HST or hydraulic shuttle your would have been very pleased.
@JW-us7qh4 жыл бұрын
Happy Trails Farm Alaska. I have a L4600 with the hydrostatic trans and have been very happy with it for tight spaces.
@goodboyringo97163 жыл бұрын
@@Oliviaswaxtech . ... Stick shift 8 speed is stronger, easier to fix and cheaper. I'd rather fix a clutch than send it to Kubota to fix the Hydro
@Oliviaswaxtech3 жыл бұрын
@@goodboyringo9716 do you have proof it is stronger? Why can’t you fix a hydro yourself they are pretty simple.
@faithmissions55514 жыл бұрын
Do you know anything aboutKIOTI tractors??
@JW-us7qh4 жыл бұрын
FAITH MISSIONS. I know very little about KIOTI tractors. Their no real strong dealers in my area. In the past I have been around them, they seem like a decent tractor. Parts and service might be a little tough to get.
@n7hevn4 жыл бұрын
You get to have all the fun.....
@JW-us7qh4 жыл бұрын
I do enjoy my work.
@n7hevn4 жыл бұрын
Thanks for sharing, this was the type of customer review I was looking for!
@JW-us7qh4 жыл бұрын
Glad to hear it.
@kng2bishop5 жыл бұрын
priceless video to me, Im down to plastic vs metal in my final decision(after months of comparison) and u answered this as someone that knows JD. Thank u sir!
@anymanusa5 жыл бұрын
Great points. I think you're right about Kubota being on top of the game for compact tractors.
@SpinDizzy-fr8bc5 жыл бұрын
Thanks for posting this review. I'm looking pretty closely at the mx5200 FRC. It has a synchro shuttle shift and I think it also has partial synchro manual gear (3 and 4, I think...). I am wondering what sets this model and the DT apart except for 4WD? Also, what do you think of the FRC model? I don't plan to push snow, 20% loader work and 80% mower and haying work. I wanted a higher PTO hp just for future implements I may want to use....wood chipper and rototiller. Would appreciate your insight, cheers from Ontario!
@JW-us7qh5 жыл бұрын
I do not think their is any difference between the FRC and DT. Both offer 4WD the DT is the US model equal to the FRC which is Kubota’s Canadian Model. Transmission in the DT offers 3rd and 4th synchro equal to the FRC model. This tractor has very good loader control at max load capacity handles very good. I would recommend asking your dealer to add fluid to the rear tiers for ballast. The MX5200 I have not had it hooked to anything other than the BH92 but would speculate it would handle mower work like a breeze. My L4600 handles most of my rough cutter work and it is a downgrade compared to this MX5200. Over all the MX5200 DT or FRC is a very well rounded tractor can handle a multitude of tasks with out much hesitation. Anyway I hope that helps a little. Thank you for watching.
@questioneverything21525 жыл бұрын
Is that a 18” bucket on backhoe?
@JW-us7qh5 жыл бұрын
Question Everything. Yes it’s a 18”
@questioneverything21525 жыл бұрын
I have the same great tractor minus excavator.
@JW-us7qh5 жыл бұрын
Question Everything. I really like my Kubota tractors.
Пікірлер
me gusta mucho bien cómodo
Which tractor model? Mounted ro frame or 3 point?
Good looking soil. Not that red clay crap we have.
Το κακομοιρο δεν μπορει
Just a tip, dig out 2 sides then go 90° and dig the other sides.
I tuned in to see you bury a stump. You didn't.
😋🤫😋😋😋😋😋😋han i45hjrv5tc5
How many cost for this
250,000 Nepalese Rupees
I have the L2501 and am really happy with it. I like the metal hood too. I don't take a bowling ball to the woods with me so I didn't need the John Deere. Good job on this review. New subscriber here.
I am surprised you didn’t buy a Kubota with a GST transmission. It sounds like the manual is your biggest complaint.
Sturdy enough to do the work and get it done.
That backhoe attachment looks like it does a pretty good job.
2021 ... I'm considering Kubota but Kubota is no where to be found.
Thanks for sharing your experience with John Deere and larger machinery.
1:40 The paint will only fade if you keep your $30K+ investment sitting out in the sun all the time.
What up👍
What up.
That review helped me, thank you.
How smooth is that backhoe? And does the thumb work well?
The thumb works good. The backhoe is smooth to a certain extent. Since this MX only has like 9 GPM flow, it’s a little slow. It is smooth for what it is. But like iv said in other videos this is not a commercial backhoe. It’s very handy to have around your property to do a few odd jobs a year with.
my name is steven and i was wounding why you don't like mahindra , by the way i have a kubota l4701
nice post, like
THE DEER HAS MUCH BETTER LIFT CAPABILITY THEN KUBOTA SUB COMPACT. ALMOST DOUBLE...
Citation needed
Very honesty video I have ran into the same thing looking at tractors John Deere is just riding on the name and out sourcing just about everything on the tractors, for me my dealer would'nt give me the time of day so ok I bought a kubota and happy with it so far;;;;;;
What is the part number for the mechanical thumb?
Kubota makes a good tractor, I own a L39 kubota backhoe and really like it. I had a L5240 grand L series with cab it was nice tractor but was so light in the rear I couldn't do much with it in my business. I recently bought a 2607h massey and like it. I know you don't like Massey but it's a old school tractor and it's heavy. Like anything if you can't put the power to the ground your wasting your time. Anyway good video
Love My Mx 5200 great Tractor. My 3 one
Have you tried using your MX5200 with moving round hay bales with front end loader?
Dustin Cribb no I don’t think iv moved any bales with this tractor. I have moved a few large 3x4 square and 4x5 rounds dry hay with a L4600, has less loader capacity and handled the bales real easy. So I’d imagine the MX would handle them even easier than the L.
Have you had any issues with the MX? Do you have the heavy duty bucket? I was looking at the 5400 but couple of things i am not crazy about - the fuel tank location and the rocker pedal for the hydro. I thought the MX was a heavier tractor than the Grand L series because it has larger front tires but it actually weighs less than a Grand L 5460. The MX is expensive enough when compared to a premium kioti, but the Grand L is ridiculous. Kubota charges extra for stuff that comes standard on other tractors.
I have not had any issues with my MX5200. The tractor has about 110 or 115 hr. I had a code error po336 that popped up several times, the code is easily cleared by using the regen buttons. Once I changed the oil that code clears up and has not appeared again. Your salesman should be able to help find the right tractor for your needs that would work with in your budget. The advantage to Deere is the fuel tank is in the rear but still elevated off the ground on a few comparable models. The advantage of that is adds a little extra weight to the rear considering Deere uses cast iron housing with aluminum rear ends, plastic fenders, fuel tank etc.
Just get a kioti. 10k less than competitors, higher lift capacity, cheaper to fix and easier. Built at industrial commercial standards. They are literally the Bob cat tractor line painted orange.
That’s the cheapest MX you can get.
Happy Trails Farm Alaska. You must have 10 or 12 of these tractors just sitting around then since they’re so cheap.
No, I am referring to your comment about the transmission. You bought the base model version. If you went with the HST or hydraulic shuttle your would have been very pleased.
Happy Trails Farm Alaska. I have a L4600 with the hydrostatic trans and have been very happy with it for tight spaces.
@@Oliviaswaxtech . ... Stick shift 8 speed is stronger, easier to fix and cheaper. I'd rather fix a clutch than send it to Kubota to fix the Hydro
@@goodboyringo9716 do you have proof it is stronger? Why can’t you fix a hydro yourself they are pretty simple.
Do you know anything aboutKIOTI tractors??
FAITH MISSIONS. I know very little about KIOTI tractors. Their no real strong dealers in my area. In the past I have been around them, they seem like a decent tractor. Parts and service might be a little tough to get.
You get to have all the fun.....
I do enjoy my work.
Thanks for sharing, this was the type of customer review I was looking for!
Glad to hear it.
priceless video to me, Im down to plastic vs metal in my final decision(after months of comparison) and u answered this as someone that knows JD. Thank u sir!
Great points. I think you're right about Kubota being on top of the game for compact tractors.
Thanks for posting this review. I'm looking pretty closely at the mx5200 FRC. It has a synchro shuttle shift and I think it also has partial synchro manual gear (3 and 4, I think...). I am wondering what sets this model and the DT apart except for 4WD? Also, what do you think of the FRC model? I don't plan to push snow, 20% loader work and 80% mower and haying work. I wanted a higher PTO hp just for future implements I may want to use....wood chipper and rototiller. Would appreciate your insight, cheers from Ontario!
I do not think their is any difference between the FRC and DT. Both offer 4WD the DT is the US model equal to the FRC which is Kubota’s Canadian Model. Transmission in the DT offers 3rd and 4th synchro equal to the FRC model. This tractor has very good loader control at max load capacity handles very good. I would recommend asking your dealer to add fluid to the rear tiers for ballast. The MX5200 I have not had it hooked to anything other than the BH92 but would speculate it would handle mower work like a breeze. My L4600 handles most of my rough cutter work and it is a downgrade compared to this MX5200. Over all the MX5200 DT or FRC is a very well rounded tractor can handle a multitude of tasks with out much hesitation. Anyway I hope that helps a little. Thank you for watching.
Is that a 18” bucket on backhoe?
Question Everything. Yes it’s a 18”
I have the same great tractor minus excavator.
Question Everything. I really like my Kubota tractors.