Пікірлер

• 
  @MarcumUP8 күн бұрын

  got a video for plumbing?

• 
  @omnibuildersnz6 күн бұрын

  do you mean how its hooked up to plumbing? only really on one of the first vids i had the 1 i used for my renovation, i had the waste running to a gully trap outside with the hot and cold from the house connected by a plumber, but now it runs via a califont and waste can go to anything, cheers

• 
  @MarcumUP6 күн бұрын

  @@omnibuildersnz more like how its hooked up out of a house. like water supply (ideas) heating, waste or disposal. if not its a good topic for video

• 
  @omnibuildersnz6 күн бұрын

  ok yeah there is a short vid where i show how the califont works

• 
  @bradfry225910 күн бұрын

  I've been subscribed to your channel a while now and enjoy watching your stuff. I'm a flooing installer in the Wairarapa and do a reasonable amount of timber and laminate among other things. Use the same miter saw and slightly smaller table saw and its cool to see you can nicely do that sort of work with this gear.

• 
  @omnibuildersnz10 күн бұрын

  thanks brad, appreciate your viewership 😃 yes it took a bit more effort than it would with nicer gear but great results none yhe less, dewalt is great kit🤙

• 
  @c33jp13 күн бұрын

  Recently got given a buckeroo belt and chucked my Taurus pouches on. Full recommend. Gonna get the suspenders next

• 
  @omnibuildersnz12 күн бұрын

  is that the back support belt? honestly its saved my back ay mate, good score for free 🤙

• 
  @c33jp12 күн бұрын

  @@omnibuildersnz yeah bro just the standard one not the extra thick one. Def would recommend to anyone running Taurus. Picking up some suspenders tomorrow, tried some on today, def instantly feels better than not running them

• 
  @ThaddeusVilain17 күн бұрын

  What timber are your columns? 90x90 H3?

• 
  @omnibuildersnz17 күн бұрын

  135x135 glulams

• 
  @ThaddeusVilain17 күн бұрын

  That's a dope verandah

• 
  @omnibuildersnz17 күн бұрын

  hit the like please!!!!!

• 
  @thegckc17 күн бұрын

  Saw your van at placies in Akl thought you must have moved up here?

• 
  @omnibuildersnz17 күн бұрын

  i did yes haha

• 
  @omnibuildersnz17 күн бұрын

  uou😅😅😅😅

• 
  @matmasiv-17 күн бұрын

  Bro credit due! Hard work pays off ay. When r we goin' on our island getaway haha

• 
  @bjd287918 күн бұрын

  Sneaky lol. Hope it’s going good there.

• 
  @joshuahall9809Ай бұрын

  what is the height on the inside

• 
  @omnibuildersnz29 күн бұрын

  about 1.8 meters, but i just had a epiphany stay tuned to the next vid

• 
  @omnibuildersnzАй бұрын

  whoops!!! did i say waitangi? face palm!!!! apologies 😅

• 
  @JesusVillanueva-ib7scАй бұрын

  Love for the woods in puerto rico

• 
  @DarrenholmesАй бұрын

  Hi, will a 6”4 person stand inside there ok?

• 
  @omnibuildersnzАй бұрын

  hi darren not this version but i just figured a way to solve that issue, stay tuned for the next build....

• 
  @richards6028Ай бұрын

  Hey bro nice vid, just wondering will the buckeroo suspender fit on a normal Taurus leather belt.

• 
  @richards6028Ай бұрын

  Or do you need to buy the belt as well..

• 
  @omnibuildersnzАй бұрын

  hey, glad you liked it 😃 you mean just the suspenders? im sure they would but you would neet to adapt it a bit like add some clips or something, best of luck😊

• 
  @gowerskiАй бұрын

  i have no idea what I'm looking at😅

• 
  @omnibuildersnzАй бұрын

  haha neither did i 😂😂 made it work though haha

• 
  @barron204Ай бұрын

  For a garage space, I love the lighting and the interesting block texture on the walls. The drop-down racks are a good idea.

• 
  @omnibuildersnzАй бұрын

  yes the house is quite a masterpiece this garage is just the start 😊

• 
  @FysonTordАй бұрын

  Good stuff man, love ya videos

• 
  @omnibuildersnzАй бұрын

  thankyou mate!!

• 
  @tnucsidАй бұрын

  more of them for a easier pull and less stress on them

• 
  @omnibuildersnzАй бұрын

  thankyou! yes have since researched and have a plan of action for next time😁

• 
  @barron204Ай бұрын

  Nice set up and great deck job. Interesting comment about the Covid times. It was relaxing at first but super hard to get started again. Living through Renos is a challenging activity every day.

• 
  @gowerskiАй бұрын

  congrats dude

• 
  @antonyhochАй бұрын

  What area of NZ are you in? and what's the buy price on one of these?

• 
  @omnibuildersnzАй бұрын

  hey antony, im in auckland, price with califont all ready to plug in and go to $2200 incl gst. have it on trade me and facebook marketplace

• 
  @JS-kj6qfАй бұрын

  I wish I could buy one here in the states.

• 
  @freefab-wt5rtАй бұрын

  Excellent !!!

• 
  @omnibuildersnzАй бұрын

  thanks, glad you like it 😊

• 
  @freefab-wt5rt2 ай бұрын

  Beautiful !!!

• 
  @omnibuildersnzАй бұрын

  appreciate that, cheers

• 
  @alberoliva63512 ай бұрын

  Hello! I have a question. How does someone even begin to learn how to do all of this as a person with no experience whatsoever? This looks so fun and cool to build? But i have no skill that would help me do it!

• 
  @richardboyd6756Ай бұрын

  Buy basic tools and do small projects that are useful to you and watch lots of videos

• 
  @omnibuildersnzАй бұрын

  hi, thanks for your question, yes it is a little technical but possible for anyone if you take the time, plan and above all dont rush, just step by step😊 thats how i learnt 😉

• 
  @freefab-wt5rt2 ай бұрын

  I love to live and to work barefoot too as much as possible

• 
  @omnibuildersnzАй бұрын

  haha yes my ppe is somewhat laking from time to time 😅

• 
  @bradfry22592 ай бұрын

  Man I want to do building.

• 
  @omnibuildersnz2 ай бұрын

  get it bro! 😃

• 
  @damonr22332 ай бұрын

  Love it.. thinking I would have left a 12” gap or so at the top and bottom to let air circulate, help prevent mildew and or mold. Or maybe add a rv ( caravan) roof vent, or both

• 
  @omnibuildersnzАй бұрын

  it has a vent, the top ibc is upside down so the drain can be opened to be the vent, plus the door is well vented, thanks for your comment😃

• 
  @gowerski2 ай бұрын

  sheesh

• 
  @gustavviljoen88302 ай бұрын

  Show us a picture and expect us to understand why??!! Explain fukker!!

• 
  @user-ds2ej3wn8p2 ай бұрын

  Make sure you don't get trapped in that thing with the girl next door, and then sprung by your missus😂

• 
  @KevinRodriguez-zq8cq2 ай бұрын

  Hola ,estoy asiendo algo igual me gustaría saber las medidas para la puerta

• 
  @omnibuildersnz2 ай бұрын

  hi kevin, i find 760-780 mm wide works really well and 1800mm high have thought of going higher but still trying it out to see, good luck 😃

• 
  @THEDUCKSNUTZZ2 ай бұрын

  I weed a little...

• 
  @omnibuildersnz2 ай бұрын

  ha!!!! classic!!!😂😂

• 
  @gavinmvagusta77692 ай бұрын

  Just another thought or two.... I will try and get as many of the shelf screws to come in from underneath as possible to avoid places for the water to get in and it looks better..... for the corners I was going to to a halving joints glued and screwed from underneath to be stronger and less likely to move with heat and water... also can you delete/cut back the plastic a bits either side of the door so the side shelves can go straight and avoid having to do those tricky little corners? The faster you can build them the cheaper they will be and the more you will sell!! Keep up the good work. Gavin, Paihia :)

• 
  @omnibuildersnzАй бұрын

  thanks gavin have had a brain sorm and came up with a problem solve that will also sort the height issue😃 stay tuned for the next build 😉

• 
  @gavinmvagusta77692 ай бұрын

  Thanks for the inspiration... I am starting to build one soon... being tall I had ideas of adding a 100/100 or a wooden box section between the tanks to get some extra height.... and it will also give me an easy mounting point for a shelf... plus I am going to buy 4 tanks and have dry changing room attached.

• 
  @omnibuildersnz2 ай бұрын

  hmm yes good points, im not to bothered about small leaks on the shelf as it will drain away anywaythe shelf has a slight angle on it so water wont pod but yes unfortunately those little corners have to be there its ok tho coz i like the look 😅 thanks for your comments and good luch on your build

• 
  @gowerski2 ай бұрын

  looking forward to the video of using it lool

• 
  @brendon22592 ай бұрын

  Man I wish that I can do that. What might be really simple for you is really bloody hard for me lol

• 
  @omnibuildersnz2 ай бұрын

  haha kind of you to say but was definitely a struggle for me, this is my third attempt too, you can do it too :)

• 
  @brendon22592 ай бұрын

  @@omnibuildersnz haha nah seriously I can't lol. Especially with the tools that I have. We've now bought two of those IBC showers and we've sold both of them. I'm just not able to make a door for the IBC let alone a shelf

• 
  @omnibuildersnz3 ай бұрын

  apologies with the cropping, alot of this was filmed vertically for shorts😅 my bad but i hope you enjoy it anyway 😊

• 
  @ianxuereb84533 ай бұрын

  What about the edges inside what is your plan ,would have loved to see the finished edges ,over all well done ,bud 🎉

• 
  @omnibuildersnz3 ай бұрын

  hi ian, have a look at my latest video it should help, or next weeks one where i do the shelf and finish it👍

• 
  @omnibuildersnz3 ай бұрын

  thanks guys going to really up my game in the coming months! watch this space 😊

• 
  @barron2043 ай бұрын

  The showers are a great idea. Nearly 1k.

• 
  @omnibuildersnz3 ай бұрын

  So close!

• 
  @luxluv79343 ай бұрын

  Nearly 1K subs! 🎉 good on ya bro 💪

• 
  @princearthur49463 ай бұрын

  Nice!

• 
  @jaclynnortiz50223 ай бұрын

  Are you selling it?

• 
  @omnibuildersnz3 ай бұрын

  yes building and selling them in auckland

• 
  @EveryWhichWayButLost3 ай бұрын

  Awesome.e, we've just moved into our self built cabin. Now to build this . Thanks for the video

• 
  @omnibuildersnz3 ай бұрын

  great, glad i helps, make sure to watch the latest vid i explain things a bit better😃

• 
  @AskTheBurnoutCoach4 ай бұрын

  Genius bro!!!

• 
  @omnibuildersnz3 ай бұрын

  Glad you like it! more vids coming brother😃

• 
  @omnibuildersnz4 ай бұрын

  well the first one was a success!!! sold to a very happy customer, time to build the next!!!! 😊

• 
  @racheljohns6004 ай бұрын

  Kiwi ingenuity at its finest!! Cheers, you have fixed my temporary bathroom problem and then a permanent outdoor shower!! 2 for 1 Bonus!! 🎉

• 
  @omnibuildersnz3 ай бұрын

  Glad to help!

• 
  @julietachirino4 ай бұрын

  Hi man! Thanks for your video! Which clips did you use??

• 
  @omnibuildersnz3 ай бұрын

  clips? i use hose clamps to fasten the cages together then the door locks it togeter even more😎

• 
  @ironmudder77704 ай бұрын

  looks great. I am building a similar version. One thought about the pull knob for the door if it breaks while your in the shower can you get yourself out? I may install it in reverse or make an emergency open if stuck.

• 
  @omnibuildersnz3 ай бұрын

  hi yes good question, my latest iv simplified the design, be sure to check ot out 😃