NexGen Marine & Outdoors Media
NexGen Marine & Outdoors Media
Mission: Live and breathe the outdoors.
My Name is Layne Runyon and I'm the owner of Nexgen Marine and Outdoors.
I also have 10 years sales experience in the marine industry (primarily bass boats/jet boats) and hope to bring some of what I have learned to you.
NexGen is a media group focused on the next generation of outdoor gear and the lifestyle associated with it. You'll hear about the products and places I love and why, mixed with some entertainment along the way. All wile passing on the traditions of the outdoors. Based in the PNW and the SW, you're bound to see some amazing scenery. #avantlink
Пікірлер
I recently installed the same ones on my boat trailer, one fell off ! Bearing Buddy replaced it free, an again it got loose and ready to fall off ! I took it off until I got home. I then thoroughly cleaned the areas were the cap meets the hub and applied locktite blue , I don’t expect it to hold and guessing I need a new hub ? Why this is happening to only one side is beyond me ? Thanks, very helpful.
Just got one on a trade. So far I really like it.
Very cool boat. The only thing I was wondering was why they couldnt cushion the storage doors. It wouldnt take much and it therefore wouldnt sound like youre walking on a scrap pile of pole barn steel. Plus, the front storage should just be waterproof. No reason not to be.
Ya I ended up putting seals on the front doors and it made a world of difference.
Better than getting skunked.
7mag is the caliber of choice for se ga. whitetail,,,after the 6mmcm failures to knockdown 135lb deer the facebook has become the voice of the slob hunters we have……
😂
These low tops seem more of the move scaling up and down mountains to find fishing holes no? I’m out here in Washington and came across some gnarly trails where I feel like my felt soled wading boot which is high top didn’t give me much mobility where I think this low top (which is like a sneaker) would.
@@danijelbrdar I would say yes and I’d probably wear my low tops for that as well. But really depends on the terrain the taller boots fitted correctly will give a lot more protection of rolling and possibly injuring your ankle.
Congrats! I hope to be there some day!
@@Kayaks_and_camo just subscribed for you! You’ll get there just stick with it!
@nexgenmarineoutdoorstv thank you for the sub!
Rude. I was actually interested
Click the link to the full video!
zero content in video. no fun
Why are you hating?
@@davidwagner8776 click the link to the full video
ummm why?
Cuz it’s fun
I love you guys❤❤😊
G3 18 ccj?
@@matthewmilner6499 20ccj
Good catch
Why do NONE of you fishing channels actually show the catch….
What a useless video
I miss fish on the EWG. The tube bunches up in the bend and covers the barb. I like the jig head the best but a Carolina rig would be awesome with a seedless screw bait keeper and a senko tip wedged way up inside the tube. Screw the keeper into the senko through the tube and Texas rig the end.
Nice!
I have the tioga (the same kayak). I'm totally doing this.
@@Kayaks_and_camo it’s so much better
@@nexgenmarineoutdoorstv how is the stability on the water?
@@Kayaks_and_camo it’s very good
What's with the eerie background?
That would be wildfire smoke
Beautiful 😌
All you need
Check out the seat upgrade I did on my channel!
That works shockingly well! But does the back of the chair block the rod holders?
No I should have shown that. It looked like it would but they are at just the right angle
I’m a 10 1/2 and just got a sized-up pair of 12’s in the Korkers Greenback. I tried them on with a pair of wading pants at Cabela’s to make sure they fit. They were perfectly snug. I can’t imagine doing an upsize of only a 1/2 size from a 10 1/2 to an 11 like you did. I’m glad it worked for you, but I just want others to try out the sizes if at all possible. Our differences with the same shoe size illustrates the point.
You should always try on anything before purchasing! Totally agree with you
Could you put a link to the kayak? I’ve been wanting a cheap one for sometime but want one that’ll still match a good expectation.
Ive done it before, typically I give it the beans on the hooksets now lol
Haha me too! Have to dodge the little guys when they come flying at you sometimes 😂
When you do something everyday it becomes boring and work.
Not this
Lmao i have the same camper
Nice
The worse part is when the buddy or whoever your fishing with tries to stand on some moral type of high ground and is like “you gotta set that hook” like motherfucker I did set the damn hook.
Haha definitely had my share of that!
"Little" is a relative term
I remember I had a huge musky on and I yelled at my dad to get the net and when he swiped the net down to get the fish he cut my line with the net! Argggh!
Been there for sure
Nice
Nice hand
I'm guessing Jace wasn't fast enough with the net lol
Haha he was still learning but we got it
👍👍👍✔️
What’s a lure that you recommend for trout
P worms.. micro jig... micro weighted bobber about 2 to 3 feet up
Chartreuse power worms
The classic rooster tails work great too!
Your doing good keep going
Thank you!
Thanks for taking the time to make the video. Really helps with making a decision. There are ALOT of great options. Everybody has slightly different needs and budget. You still happy about your decision? Im looking closely at your same exact model. Thought maybe you could give some thoughts after 2 years?
So the quick answer is yes. If I were constrained by budget I’d go with the G3. I still would not go with a gatortrax in anyway situation. There cost, lack of interest in helping ship boats, lack of knowledge of our area and my overall feeling of not being heard when building the boat would keep me from going that direction. More than likely I would go with a Wooldridge if I were to do a strait jet style boat. If you live close to Gatortrax I would say they’re worth looking at.
Awesome thank you for the vid
Thank you for watching!
Randy is a cry baby
What length garmin force did you go with?
57” but don’t need it get the 50”
@@nexgenmarineoutdoorstvawesome thanks for the help!
Whats the top speed with the 150/105 on that boat?
34ish
Great job and Video, I have a 2010 G3 1656 CCJ , I was wondering if you could send me some info cause I would love to do the same with my boat if it is available for mine? I really hope to hear back from you soon. Thanks
For a 1656 you’ll probably need to make custom templates or have a certified installer do it for you
So interestingly enough, the water likes to get down in the walls. I would see if there's a cabinet or something on the inside that you can carefully remove assuming you don't want to damage anything and take a look that way. Also, you can check the floor right under that spot
The second happiest day of your life
Easy 20k at bass pro shop 😂
That is my boat that got stolen in Cedar Rapids Iowa.
Dang
This one had a record of being in Idaho its whole life but that sucks you had a boat stolen
@@nexgenmarineoutdoorstv I understand that. The boat was set up just like this one ☝️.
I used to own that same exact boat
Nice man! Looking for one similar for me and my reel friends. We have kayaks with motors but need one like that for ease. Tight lines fam!
Tight lines! Thanks for the comment