I like how you provide valuable info, take the time to film and edit it and then get comments about music volume preferences from people who don't post/edit/upload videos unless it was a short one of their cat filmed on a potato 12 years ago.
@everygooddaydesigns5 күн бұрын
@@SpencerWayne hahahaha, I enjoy that lol. Its no biggy though, I did butcher the volume a little bit
@videoscrapheap9 күн бұрын
Did you lower the focus? If not, try lowering 4mm and try again.
@everygooddaydesigns9 күн бұрын
@@videoscrapheap i used the auto focus for this one.
@videoscrapheap9 күн бұрын
@@everygooddaydesigns Lowering the focus for thick materials will help. It’s in the EasySet panel for cuts. There’s even a suggestion out there to add the feature to lower the focus after n passes on a multipass cut. For example you could lower the focus after 2 passes on a 4 pass cut. That’s a feature in some other software out there. Technically you can probably accomplish that by copying the path and changing the focus on which ever one is second but the suggested feature would make it much easier.
@everygooddaydesigns9 күн бұрын
@@videoscrapheap thank you for the advice! I didn't even know that was a feature but it makes some based on the depth it's cutting. I'm confident this cut cut the 2x4 in two to three passes
@everygooddaydesigns11 күн бұрын
Idk the guy doing the flip, just a cool dude enjoying the water
@drdisko12 күн бұрын
An old toothbrush works great to get rid of the paint and any stray glass.
@everygooddaydesigns12 күн бұрын
@@drdisko that's actually a really good idea lol. Didn't even think about that
@drdisko12 күн бұрын
@@everygooddaydesigns I have developed and taught several laser courses including rotary for 150W CO2 machines and just ordered an SI with a 40W, IR module and rotary for my partner. Really like the safety features on the S1 and am impressed with the S1 videos.
@everygooddaydesigns12 күн бұрын
@@drdisko yeah, its been a really awesome machine so far. The software is pretty easy to learn as well. I recommend skipping the conveyor feeder unless you are doing thinner material and only plan to engrave. I also can't recommend their IR laser, the first laser I got almost immediatly gave warnings for over heating. They replaced that laser with a new one and it did the same thing. I began to troubleshoot random things like check the air assist and see if it was causing the issue and other things. I think its a software issue but I have not been able to confirm that yet. Sorry about that lengthy post, I like the S1 alot, just wish they put more thought into some of the add-ons. (Tumbler rotary is pretty good)
@everygooddaydesigns13 күн бұрын
comment if you have any questions or future ideas you would like to see.
@SeleneR4mirezz16 күн бұрын
Just got my S1 and my head is making it more difficult than it is. Nice video! Thank you for this!
@everygooddaydesigns16 күн бұрын
@@SeleneR4mirezz it gets easier just find some cheap stuff to engrave and cut initially. The software is decent one you figure it out
@Eyez31327 күн бұрын
So do not buy, because you didn't read the item specs....got it
@everygooddaydesigns27 күн бұрын
@@Eyez313 yeah sure or because it doesnt have really any real value. If you only plan on engraving half inch boards good for you. If my advice doesnt resonate then get it. Thanks for the input
@Eyez31327 күн бұрын
@@everygooddaydesigns currently in cart
@everygooddaydesigns27 күн бұрын
@@Eyez313 okay lolol, its your money. Best of luck brother
@Abbysatticcreations9 күн бұрын
If you add tabs the stuff won’t drop through.
@Abbysatticcreations9 күн бұрын
Also I agree definitely can’t put thicker wood. Would have been great if we could.
@MrZartАй бұрын
The video is really informative but the music is REALLY LOUD, distracting and painful to listen to. Sorry😢
@everygooddaydesignsАй бұрын
Haha, i think in my more recent videos I figured the volume out lol
@ProfSimonHolland23 күн бұрын
@@everygooddaydesignsas an editor i liked the choice of music...just dip it under speech..enjoyed the video as a S1 owner.
@everygooddaydesigns22 күн бұрын
@@ProfSimonHolland I appreciate it, wish I could go back in and adjust the music
@TiagoSerrartАй бұрын
Hi! nice video! If the screen is removed from the frame, can it be placed back on a new frame without any problems? like 8 lets gooo oo!
@everygooddaydesignsАй бұрын
I appreciate it and Yeah, if you have another frame you can move it between them. I take it out almost everytime just to clean the paint off after.
@CrazyHippie33Ай бұрын
In the dandelion family but, not a true dandelion, seems to be a Salsify (Tragopogon porrifolius).
@everygooddaydesignsАй бұрын
Ohhhhh, i think this is my first time seeing ones like this. It was surprising lolol
@alexgard4968Ай бұрын
Respect the authoritah
@everygooddaydesignsАй бұрын
Lolololpl
@lazylaserwhittlingАй бұрын
So? outcome with Xtool support? I have the D1Pro 2w IR module and have yet to get anything remotely acceptable off it regarding anodized aluminum. While they have replaced the module once and sent me a focus gage, the results using their default xcs settings and experimenting leaves the same awful results… While my D1 has proven excellent regarding 455nm 20w , the 2W IR is simply problematic at best!
@everygooddaydesignsАй бұрын
Same, they sent me a replacement but the replacement did not fix the problem, this makes me think that either the hardware itself is terribly built or there is an issue with the software. I like the idea of being able to engrave metal but if the engraver can only run 2 seconds at a time then whats the point. I believe the IR laser is not of much value at this point. However, it could be a problem with my specific setup because I cant seem to find anyone else with this same issue. Very strange.
@everygooddaydesignsАй бұрын
Xtool support did good though, the process took a while to get through
@dravernverrtz6768Ай бұрын
Any advice for someone about to do this next week
@everygooddaydesignsАй бұрын
Enjoy it and dont panic. It was a really fun training, I would do it again if I could
@TheExtremeElementzАй бұрын
What would have happened if you put the black paint inside the glass instead of outside? Would it have made a difference?
@everygooddaydesignsАй бұрын
I havent tried that but I'm curious if it wpuld melt on the inside since the laser passes through glass and stops at the paint
@TheExtremeElementzАй бұрын
@@everygooddaydesigns Are you happy with the S1? Been looking into getting into lasers but dang hard trying to find a KZreadr that wasn’t given a machine for free or sponsored… I saw your other video with the IR laser having a problem, did XTool fit it for you?
@everygooddaydesignsАй бұрын
@@TheExtremeElementz so I like the S1 alot and the software that comes with it is straight forward. I reccommend it if you are looking for something to do work with. (Get the 40W if you plane on cutting). I wish it had a little more space inside the machine for engraving though. As far as the IR laser, they sent me a new one, it does the same thing though. Idk what the issue is with it but I think its something to do with software. The laser almost always say its overheating after using it for just a few seconds. If that is the way its buikt then they should rethink the IR laser
@BeerKillenRedneckАй бұрын
With Your Backyard… You Should Have Started With The WeedEater.
@everygooddaydesignsАй бұрын
It was just a test run to see how this thing works, I do have the weed eater though lolol
@meridacavediverАй бұрын
I saw a video where a guy used a sharpie instead of paint, but I’m waiting for my engraver to arrive so what do I know lol
@everygooddaydesignsАй бұрын
I havent tried the sharpie but it could work, I do know the paint works though lolol. Maybe I'll test the sharpie thing, it might be quicker than watching paint dry lol
@everygooddaydesignsАй бұрын
Also, what laser did you go with?
@margohenderson2877Ай бұрын
Thanks for including your settings. Great job explaining things.
@everygooddaydesignsАй бұрын
Appreciate it, let me know if you have any questions
@everygooddaydesignsАй бұрын
Leave a comment if you have any questions
@laplumedescaron142Ай бұрын
and after you clean your desk ??? :) :) :) thank you for the video
@everygooddaydesignsАй бұрын
Lolol, every now and then i clean the desk. Just takes some motivation for that one lolol. Your welcome
@laplumedescaron142Ай бұрын
it was a joke, humor... of course :) :) :)
@everygooddaydesignsАй бұрын
@@laplumedescaron142 hahahha, I know. I was joking, text makes things weird sometimes lololol
@conover1978Ай бұрын
Great video. Thx.
@everygooddaydesignsАй бұрын
No problem, I appreciate you
@conover1978Ай бұрын
4:25 😂😂😂
@conover1978Ай бұрын
4:09 wow! I wish my lid still looked like that. lol.
@everygooddaydesignsАй бұрын
Lololol, I'm curious what your lid looks like now
@globaltraveller2 ай бұрын
Was it a good cigar though? lol
@everygooddaydesigns2 ай бұрын
Hahahahha, it was an old cigar I got about 10 years ago. I was curious if it would light. It did smell good though
@globaltraveller2 ай бұрын
@@everygooddaydesigns No good cigars came to any harm 😅
@everygooddaydesigns2 ай бұрын
@@globaltraveller lolol, it would suck to find out this was some kind of extremely rare cigar lol
@huhreally7192 ай бұрын
I have no idea what your trying to say
@everygooddaydesigns2 ай бұрын
Like the entire video?
@xigotmailx2 ай бұрын
Thank you for a complete breakdown / clean up video! Much more in depth than xTools video where they only clean the lens! Appreciate it!
@everygooddaydesigns2 ай бұрын
No problem
@niagarawarrior96233 ай бұрын
i understand the 40w laser module should be cleaned after every 30 minutes of use, or probably an 1-2 hours with air assist on high, and i would definitely take the noticeable chunks and tray debris out often.... how often should the S1 be cleaned and lubricated like this?
@everygooddaydesigns3 ай бұрын
The chunks and debris get removed pretty much everytime, however, I do not wipe the sticky residue from the wood on the tray too often. The honey comb makes this less of a concern. As far as how often it should be cleaned and lubricated, I don't have the official answer. I've been doing it roughly every month or two depnding on how often I use it. Basically if the laser head is super dirty or there is a lot of build up on the walls I take that as an indicator to lube the bars
@funit643 ай бұрын
I was wondering if WD-40 would be any good or better 🤔
@everygooddaydesigns3 ай бұрын
I wouldnt recommend it because the peng sheng is more of a grease for the movement over it. However if the wheels and pulleys started locking up WD-40 would make sense to me.
@mojo2613Ай бұрын
@@everygooddaydesigns What would you recommend if we don't have the Peng Sheng grease?
@everygooddaydesignsАй бұрын
@@mojo2613 I'm not gonna lie, I'm not sure. However, I dont see why any grease from a car parts store would not work. The purpose is lubrication, I imagine a grease with similar properties would be fine.
@mojo2613Ай бұрын
@@everygooddaydesigns Yeah, I did some research on it.. I think you're right. Or I see some other silicone based grease on Amazon sold in small tubes.
@everygooddaydesignsАй бұрын
@@mojo2613 yeah, not a lot about peng sheng on the internet really.
@MARILYNREID-bd3ch3 ай бұрын
Basic multi surface cleaner has cleaned the resin on tray quick and easy
@everygooddaydesigns3 ай бұрын
Thank you, the wood burning leaves alot of residue lol
@fudgiousАй бұрын
Baby wipes work wonders too.
@everygooddaydesignsАй бұрын
@@fudgious that's one I probably need too use lol. Easier than paper towels
@jazzzyyy4203 ай бұрын
the LA's totally awesome cleaner works wonders on that sticky stuff thats always on the tray its a great degreaser
@everygooddaydesigns3 ай бұрын
I havent reallt done a full clean on that because everytime I clean this I go straight back into cutting wood which is gonna make it sticky again. I appreciate the tip though incase I do ever try to clean it fully
@philipershler4203 ай бұрын
Great information, but the loud repeat music is very distracting.
@everygooddaydesigns3 ай бұрын
Thank you, I've been changing the volume on future videos. Apologize for that. Hopefully all future videos will have a mpre subtle music
@Vee_isssh3 ай бұрын
Would you mind posting a step by step tutorial on how to process something using the conveyor belt? For the life of me, I can’t get the measurements right as far as how far to put my material into the machine, how much extra material to have for a project, and the framing 😵💫
@everygooddaydesigns3 ай бұрын
Yeah, I need to use the conveyor again soon for a project and I could cover a video on that.
@everygooddaydesigns3 ай бұрын
Leave a comment and a like!
@EdvinEnetjarn3 ай бұрын
Music too loud. But thank you for sharing!
@everygooddaydesigns3 ай бұрын
Yeah, I'm still try to figure out where to set the music levels at lolol.
@MrZartАй бұрын
@@everygooddaydesigns Don't. You really don't need any music.
@everygooddaydesigns3 ай бұрын
For questions on the conveyor just shoot me a message
@everygooddaydesigns4 ай бұрын
Be sure to leave comments and a like
@adan53474 ай бұрын
'promosm'
@user-ts9lm2kg8u4 ай бұрын
plz make a video showing how a high detailed image would come out like a halftone :)
@everygooddaydesigns4 ай бұрын
I'm supposed to be making some shirts for someone in the coming weeks, I'll try to make a video of the process if I can.
@christinasanchez5774 ай бұрын
Hi. How often are you supposed to clean? And did that time change depending on the material you are engraving? Thank you!
@everygooddaydesigns4 ай бұрын
I dont actually know if there is a set time frame for cleaning that xtool recommends However, I do a lot of wood cutting and it produces alot more debris and smoke so I clean about every 3 or 4 weeks. If I was just engraving I would probably do it about every 2 months. The best indicator for me is the top of the laser where the fans are. If it looks like a lot of build up is there I give it a good clean.
@funit644 ай бұрын
Yeah hi I’ve got a question, I’ve got the S1 20w and I was cleaning the lens with alcohol and a cotton swab, unscrewing the copper lens there’s another lens underneath that which l noticed was loose my question is,is that lens supposed to be tightened or set at level height ….any idea would be appreciated.
@everygooddaydesigns4 ай бұрын
So I am attaching the link for the xtool video for cleaning the laser heads. I figure watching it would be easier. But if you still have questions afterward I can attempt to answer them
Looks like it’s screwed all the way down in the video Thanks for your help I really appreciate it 👍🏻
@everygooddaydesigns4 ай бұрын
@@funit64 no problem, thanks for asking. Have a super blessed day
@garethwatcham77923 ай бұрын
@@everygooddaydesigns Man! That Xtool video suggests cleaning every 30 minutes with the 40w! how would you get any work done!? You've had no issues only doing it every 3-4 weeks? Only had mine a week and now feel like i'm behind on cleaning. - Great Video thanks for helping!
@51custom4 ай бұрын
Hey thanks Danny I’ve been looking for a video on this for a while. So thanks man look forward to other videos as it pertains to x tool s1
@everygooddaydesigns4 ай бұрын
No problem, I should be publishing one on cleaning the rails and the interior soon
@everygooddaydesigns4 ай бұрын
Be sure to ask any questions you have
@everygooddaydesigns5 ай бұрын
Please leave comments if you have any extra questions. Also I can make more videos if I need to
@GoCreateSomething5 ай бұрын
I love your screen capture software. rofl.
@everygooddaydesigns5 ай бұрын
Lololol, its that vintage software you get from gopro direct. If you for real want a screen capture video I can make one though lol
@eprohoda6 ай бұрын
Super-you did unreal view~
@everygooddaydesigns6 ай бұрын
Thank you
@MegerisAzarael76 ай бұрын
Nice! Lol
@everygooddaydesigns6 ай бұрын
Haha, I feel like I've been looking at these for.years
@MegerisAzarael76 ай бұрын
They are legit! I want a glowforge lol
@everygooddaydesigns6 ай бұрын
@@MegerisAzarael7 i looked at the glowforges but they were more limited on the objects they could engrave. I wanted to do curved stuff. The glowforges looked easier to use though. The cameras make a big difference
@MegerisAzarael76 ай бұрын
@@everygooddaydesigns oooooo
@everygooddaydesigns6 ай бұрын
@@MegerisAzarael7 lololol
@vivianak20339 ай бұрын
My son passed today, first time he tell me “ is not fun is sucks”
@VagabondTexan Жыл бұрын
I just read a book about the making of a Night Stalker crew chief. He described this training in the book, but this was a great video to actually see what he went through.
@williambrock7110 Жыл бұрын
I got a marine land maxi jet 900 for my pump and I had it hooked up to it before but it’s been such a long time I don’t know how to hook my pump to my protein skimmer I forget and I got no directions it’s old any ideas how to hook up my marine land maxijet up to my protein skimmer
@Luke-tx5qw2 жыл бұрын
this is a 7 year old video but dude please upgrade your filtration
@kd3nal72 Жыл бұрын
his filtration is fine
@jaimegodoy32462 жыл бұрын
alguna instruccion en español o subtitulos , gracias
Пікірлер
I like how you provide valuable info, take the time to film and edit it and then get comments about music volume preferences from people who don't post/edit/upload videos unless it was a short one of their cat filmed on a potato 12 years ago.
@@SpencerWayne hahahaha, I enjoy that lol. Its no biggy though, I did butcher the volume a little bit
Did you lower the focus? If not, try lowering 4mm and try again.
@@videoscrapheap i used the auto focus for this one.
@@everygooddaydesigns Lowering the focus for thick materials will help. It’s in the EasySet panel for cuts. There’s even a suggestion out there to add the feature to lower the focus after n passes on a multipass cut. For example you could lower the focus after 2 passes on a 4 pass cut. That’s a feature in some other software out there. Technically you can probably accomplish that by copying the path and changing the focus on which ever one is second but the suggested feature would make it much easier.
@@videoscrapheap thank you for the advice! I didn't even know that was a feature but it makes some based on the depth it's cutting. I'm confident this cut cut the 2x4 in two to three passes
Idk the guy doing the flip, just a cool dude enjoying the water
An old toothbrush works great to get rid of the paint and any stray glass.
@@drdisko that's actually a really good idea lol. Didn't even think about that
@@everygooddaydesigns I have developed and taught several laser courses including rotary for 150W CO2 machines and just ordered an SI with a 40W, IR module and rotary for my partner. Really like the safety features on the S1 and am impressed with the S1 videos.
@@drdisko yeah, its been a really awesome machine so far. The software is pretty easy to learn as well. I recommend skipping the conveyor feeder unless you are doing thinner material and only plan to engrave. I also can't recommend their IR laser, the first laser I got almost immediatly gave warnings for over heating. They replaced that laser with a new one and it did the same thing. I began to troubleshoot random things like check the air assist and see if it was causing the issue and other things. I think its a software issue but I have not been able to confirm that yet. Sorry about that lengthy post, I like the S1 alot, just wish they put more thought into some of the add-ons. (Tumbler rotary is pretty good)
comment if you have any questions or future ideas you would like to see.
Just got my S1 and my head is making it more difficult than it is. Nice video! Thank you for this!
@@SeleneR4mirezz it gets easier just find some cheap stuff to engrave and cut initially. The software is decent one you figure it out
So do not buy, because you didn't read the item specs....got it
@@Eyez313 yeah sure or because it doesnt have really any real value. If you only plan on engraving half inch boards good for you. If my advice doesnt resonate then get it. Thanks for the input
@@everygooddaydesigns currently in cart
@@Eyez313 okay lolol, its your money. Best of luck brother
If you add tabs the stuff won’t drop through.
Also I agree definitely can’t put thicker wood. Would have been great if we could.
The video is really informative but the music is REALLY LOUD, distracting and painful to listen to. Sorry😢
Haha, i think in my more recent videos I figured the volume out lol
@@everygooddaydesignsas an editor i liked the choice of music...just dip it under speech..enjoyed the video as a S1 owner.
@@ProfSimonHolland I appreciate it, wish I could go back in and adjust the music
Hi! nice video! If the screen is removed from the frame, can it be placed back on a new frame without any problems? like 8 lets gooo oo!
I appreciate it and Yeah, if you have another frame you can move it between them. I take it out almost everytime just to clean the paint off after.
In the dandelion family but, not a true dandelion, seems to be a Salsify (Tragopogon porrifolius).
Ohhhhh, i think this is my first time seeing ones like this. It was surprising lolol
Respect the authoritah
Lolololpl
So? outcome with Xtool support? I have the D1Pro 2w IR module and have yet to get anything remotely acceptable off it regarding anodized aluminum. While they have replaced the module once and sent me a focus gage, the results using their default xcs settings and experimenting leaves the same awful results… While my D1 has proven excellent regarding 455nm 20w , the 2W IR is simply problematic at best!
Same, they sent me a replacement but the replacement did not fix the problem, this makes me think that either the hardware itself is terribly built or there is an issue with the software. I like the idea of being able to engrave metal but if the engraver can only run 2 seconds at a time then whats the point. I believe the IR laser is not of much value at this point. However, it could be a problem with my specific setup because I cant seem to find anyone else with this same issue. Very strange.
Xtool support did good though, the process took a while to get through
Any advice for someone about to do this next week
Enjoy it and dont panic. It was a really fun training, I would do it again if I could
What would have happened if you put the black paint inside the glass instead of outside? Would it have made a difference?
I havent tried that but I'm curious if it wpuld melt on the inside since the laser passes through glass and stops at the paint
@@everygooddaydesigns Are you happy with the S1? Been looking into getting into lasers but dang hard trying to find a KZreadr that wasn’t given a machine for free or sponsored… I saw your other video with the IR laser having a problem, did XTool fit it for you?
@@TheExtremeElementz so I like the S1 alot and the software that comes with it is straight forward. I reccommend it if you are looking for something to do work with. (Get the 40W if you plane on cutting). I wish it had a little more space inside the machine for engraving though. As far as the IR laser, they sent me a new one, it does the same thing though. Idk what the issue is with it but I think its something to do with software. The laser almost always say its overheating after using it for just a few seconds. If that is the way its buikt then they should rethink the IR laser
With Your Backyard… You Should Have Started With The WeedEater.
It was just a test run to see how this thing works, I do have the weed eater though lolol
I saw a video where a guy used a sharpie instead of paint, but I’m waiting for my engraver to arrive so what do I know lol
I havent tried the sharpie but it could work, I do know the paint works though lolol. Maybe I'll test the sharpie thing, it might be quicker than watching paint dry lol
Also, what laser did you go with?
Thanks for including your settings. Great job explaining things.
Appreciate it, let me know if you have any questions
Leave a comment if you have any questions
and after you clean your desk ??? :) :) :) thank you for the video
Lolol, every now and then i clean the desk. Just takes some motivation for that one lolol. Your welcome
it was a joke, humor... of course :) :) :)
@@laplumedescaron142 hahahha, I know. I was joking, text makes things weird sometimes lololol
Great video. Thx.
No problem, I appreciate you
4:25 😂😂😂
4:09 wow! I wish my lid still looked like that. lol.
Lololol, I'm curious what your lid looks like now
Was it a good cigar though? lol
Hahahahha, it was an old cigar I got about 10 years ago. I was curious if it would light. It did smell good though
@@everygooddaydesigns No good cigars came to any harm 😅
@@globaltraveller lolol, it would suck to find out this was some kind of extremely rare cigar lol
I have no idea what your trying to say
Like the entire video?
Thank you for a complete breakdown / clean up video! Much more in depth than xTools video where they only clean the lens! Appreciate it!
No problem
i understand the 40w laser module should be cleaned after every 30 minutes of use, or probably an 1-2 hours with air assist on high, and i would definitely take the noticeable chunks and tray debris out often.... how often should the S1 be cleaned and lubricated like this?
The chunks and debris get removed pretty much everytime, however, I do not wipe the sticky residue from the wood on the tray too often. The honey comb makes this less of a concern. As far as how often it should be cleaned and lubricated, I don't have the official answer. I've been doing it roughly every month or two depnding on how often I use it. Basically if the laser head is super dirty or there is a lot of build up on the walls I take that as an indicator to lube the bars
I was wondering if WD-40 would be any good or better 🤔
I wouldnt recommend it because the peng sheng is more of a grease for the movement over it. However if the wheels and pulleys started locking up WD-40 would make sense to me.
@@everygooddaydesigns What would you recommend if we don't have the Peng Sheng grease?
@@mojo2613 I'm not gonna lie, I'm not sure. However, I dont see why any grease from a car parts store would not work. The purpose is lubrication, I imagine a grease with similar properties would be fine.
@@everygooddaydesigns Yeah, I did some research on it.. I think you're right. Or I see some other silicone based grease on Amazon sold in small tubes.
@@mojo2613 yeah, not a lot about peng sheng on the internet really.
Basic multi surface cleaner has cleaned the resin on tray quick and easy
Thank you, the wood burning leaves alot of residue lol
Baby wipes work wonders too.
@@fudgious that's one I probably need too use lol. Easier than paper towels
the LA's totally awesome cleaner works wonders on that sticky stuff thats always on the tray its a great degreaser
I havent reallt done a full clean on that because everytime I clean this I go straight back into cutting wood which is gonna make it sticky again. I appreciate the tip though incase I do ever try to clean it fully
Great information, but the loud repeat music is very distracting.
Thank you, I've been changing the volume on future videos. Apologize for that. Hopefully all future videos will have a mpre subtle music
Would you mind posting a step by step tutorial on how to process something using the conveyor belt? For the life of me, I can’t get the measurements right as far as how far to put my material into the machine, how much extra material to have for a project, and the framing 😵💫
Yeah, I need to use the conveyor again soon for a project and I could cover a video on that.
Leave a comment and a like!
Music too loud. But thank you for sharing!
Yeah, I'm still try to figure out where to set the music levels at lolol.
@@everygooddaydesigns Don't. You really don't need any music.
For questions on the conveyor just shoot me a message
Be sure to leave comments and a like
'promosm'
plz make a video showing how a high detailed image would come out like a halftone :)
I'm supposed to be making some shirts for someone in the coming weeks, I'll try to make a video of the process if I can.
Hi. How often are you supposed to clean? And did that time change depending on the material you are engraving? Thank you!
I dont actually know if there is a set time frame for cleaning that xtool recommends However, I do a lot of wood cutting and it produces alot more debris and smoke so I clean about every 3 or 4 weeks. If I was just engraving I would probably do it about every 2 months. The best indicator for me is the top of the laser where the fans are. If it looks like a lot of build up is there I give it a good clean.
Yeah hi I’ve got a question, I’ve got the S1 20w and I was cleaning the lens with alcohol and a cotton swab, unscrewing the copper lens there’s another lens underneath that which l noticed was loose my question is,is that lens supposed to be tightened or set at level height ….any idea would be appreciated.
So I am attaching the link for the xtool video for cleaning the laser heads. I figure watching it would be easier. But if you still have questions afterward I can attempt to answer them
kzread.info/dash/bejne/aIaC0pJuhdqzqc4.htmlsi=2Gep8zODT7lkjSEq
Looks like it’s screwed all the way down in the video Thanks for your help I really appreciate it 👍🏻
@@funit64 no problem, thanks for asking. Have a super blessed day
@@everygooddaydesigns Man! That Xtool video suggests cleaning every 30 minutes with the 40w! how would you get any work done!? You've had no issues only doing it every 3-4 weeks? Only had mine a week and now feel like i'm behind on cleaning. - Great Video thanks for helping!
Hey thanks Danny I’ve been looking for a video on this for a while. So thanks man look forward to other videos as it pertains to x tool s1
No problem, I should be publishing one on cleaning the rails and the interior soon
Be sure to ask any questions you have
Please leave comments if you have any extra questions. Also I can make more videos if I need to
I love your screen capture software. rofl.
Lololol, its that vintage software you get from gopro direct. If you for real want a screen capture video I can make one though lol
Super-you did unreal view~
Thank you
Nice! Lol
Haha, I feel like I've been looking at these for.years
They are legit! I want a glowforge lol
@@MegerisAzarael7 i looked at the glowforges but they were more limited on the objects they could engrave. I wanted to do curved stuff. The glowforges looked easier to use though. The cameras make a big difference
@@everygooddaydesigns oooooo
@@MegerisAzarael7 lololol
My son passed today, first time he tell me “ is not fun is sucks”
I just read a book about the making of a Night Stalker crew chief. He described this training in the book, but this was a great video to actually see what he went through.
I got a marine land maxi jet 900 for my pump and I had it hooked up to it before but it’s been such a long time I don’t know how to hook my pump to my protein skimmer I forget and I got no directions it’s old any ideas how to hook up my marine land maxijet up to my protein skimmer
this is a 7 year old video but dude please upgrade your filtration
his filtration is fine
alguna instruccion en español o subtitulos , gracias