Have you seen any compatible holsters with a sidecar for this macro setup?
@m2elitetactical5874 күн бұрын
@@DAT_Concepts Ive been using a tier 1 concealed axis elite.
@kyleedwards90564 күн бұрын
Hey man I seen that you just uploaded the new radian back strap and magwell, you prefer this Wilson combat grip or the radian setup better? Should say I just picked up the new fuse and that’s what it’s going to go on. Also assume that you’re from Ohio as well? Fellow buckeye? Thanks man.
@m2elitetactical5872 күн бұрын
Both are good. But I’ve been carrying the radian. I like the radian grip more and the magwell is really nice. And yes I’m from Cleveland. #keepohiostrong.
@12gaPunisher5 күн бұрын
Thanks for the informative vid brother
@quarters-eye89227 күн бұрын
Nice 👍👍👍
@gandalf13808 күн бұрын
Holosun comes with 2 sets of screws. For the p365 do I use the thinner screws or the thicker?
@tarbo18710 күн бұрын
How does this compare to the BCM angle forward grip ?
@m2elitetactical58710 күн бұрын
@@tarbo187 I have not used that one before . So I can’t give you comparisons but I like it because of the side a texture
@tarbo18710 күн бұрын
Thank You !
@leoguy160913 күн бұрын
Although Glock has very good quality control, compared to? Lets say Taurus, they still have their issues. Glock change the recoil slightly, Glock claims it helps with reliability and recoil? Haven't noticed any difference between the Glock 19 Gen 5 and Glock 19 Gen 4. The extractor, Ejector , recoil guide rod or any combination of is usual the cause of that type of issue.
@Klikklikboom091113 күн бұрын
Plz help!! I have the same setup now, I wanted a change from the Icarus grip module. My Wilson combat will not fit in my Icarus holster. Any recommendations for new holster with light bearing option?
@m2elitetactical58713 күн бұрын
I currently am using the tier one concealment holstet
@Klikklikboom091113 күн бұрын
@@m2elitetactical587 I emailed tier 1 and they’re telling me they don’t offer a holster for the Wilson combat yet. Did you pick the axis elite with the 365 xl and a tlr7-a light and it worked?
@rm4googol93016 күн бұрын
As soon as I saw that thing I got super excited. I rely on a thumb ledge to control recoil. I don’t know how people use pistols with no piont to create pressure on the muzzle. But shit that thing is 119 bucks. I’m not happy about it but they will be getting my money
@troyroyster941816 күн бұрын
Hey man, what iron sights were you running on this build?
@m2elitetactical58716 күн бұрын
Ameriglo suppressor height site
@Matt-uz9ee17 күн бұрын
Do you still edc your G45? im kind of in a place where i still carry my glock 19 alot of the time vs the x macro, but not because of any specific reason just simply used to the glock.
@m2elitetactical58716 күн бұрын
Since I’ve got the X macro that is my main EDC. Sometime during the winter months I will carry my 320 but that is very rare.
@davidsegal223619 күн бұрын
Mine arrives tomorrow. Been using a BCM. But I have b5 stock and grip. So I figured might as well match. Curious to see if there is any difference between the two. Probably not, but whatever, it’s cool.
@davidsegal223618 күн бұрын
Just got mine in. It’s thinner and have more texture than the BCM. Love it!
@BrothaGoodReps22 күн бұрын
How many mlok slots does it cover? Can you still use the slots immediately in front and in back of the VFG?
@m2elitetactical58722 күн бұрын
It fills on full slots and yes you can still use the other slots
@tweakin153122 күн бұрын
Same exact issue here on my 43x
@chuckdriver826926 күн бұрын
This vertical grip will complete my setup. Thanks for the video!🇺🇸
@wildwolf898328 күн бұрын
How did you do in the range with the red dot? Any tips to sight in? Just installed mine on my p365 XMACRO tacops
@m2elitetactical58728 күн бұрын
Whenever I’m sighting in a dot I alway start off with putting it in a rest or a bag, then I adjusting my left to right. Then I just it up and down. In the 3 round increments. That’s what has always worked for me that way
@gmac7467Ай бұрын
Great revue. Short and to the point!
@m2elitetactical587Ай бұрын
Thank you 👍🏻
@becknit6469Ай бұрын
Looks almost identical to BCM
@MH_6160Ай бұрын
Nice…. been using the BCM, but the base is really bulky. Glad there is a new option.
@Civiliansoldier762Ай бұрын
I love B5.
@ROMEO-jr5dvАй бұрын
Digging that new vgrip. B5 systems did right by the grip texture.
@m2elitetactical587Ай бұрын
For sure. I was pumped when I seen at the show. I can’t wait for the new stuff they have coming too🤫🫣
@jeremyabravoАй бұрын
wing worth it? I’d have to mod it slightly for an icarus grip
@m2elitetactical587Ай бұрын
Yes it 100% worth it. It’s like a cheat code for your pistol
@ProtectorOfIsraelАй бұрын
I tried one and couldn't get used to the height overbore and can't fit my ar into the tennis bag with it on.
@foxracingx01Ай бұрын
How is the EPS with suppressor height sights? Been wanting this but dont want to change sights to standard
@m2elitetactical587Ай бұрын
I have no issue. I also and target focused when shooting so all I see is the dot just floating over it. Hopefully that helps
@jardinero9112Ай бұрын
My x macro comp had a dead trigger issue after about 1,500 rounds. Not cool.
@GiganticCockAndBallsHaverАй бұрын
I thought your shots were ricochetting to the left, hurt my damn brain for a sec
@jeffmitch8847Ай бұрын
Put the break down in the description! I love it!
@m2elitetactical587Ай бұрын
X Marco Holosun EPS carry Streamlight TLR7 sub Anitimatter wing Radian magwell + Backstrap Radian tru17 base pads
@jeffkashat4625Ай бұрын
I picked up the mr920 elite over the war poet because I wanted to add a closed emitter optic, planning on the eps carry Mrs in green.
@m2elitetactical587Ай бұрын
I would looking into the standard EPS for the pistol. You can go to opticsforce.com use code M2ET1177. It will save you 11%
@grassyknollblues2 ай бұрын
I have two new g19 gen 5 pistols with this same “issue”. I don’t worry about it. It’s just different than my other generations
@anthonyranvestel66392 ай бұрын
Mine works fine. Yours might be defective
@axeman7872 ай бұрын
I have the EXACT same problem. Bought the thing "brand new" get it home and its clearly had a few hundred rounds through it so i cleaned it and still have this issue. It's like the slide just doesnt go all the way back unless you really force it like you're trying to break it...anybody know whats causing this??? Maybe what might fix it???
@m2elitetactical5872 ай бұрын
When I still had it I replaced the extractor and ejector with new OEM parts and the issue went away
@PepeDeezNutz2 ай бұрын
Woooooo
@anthonynguyen60092 ай бұрын
If you order the leg strap, does that swivel mount for it come with it??
@m2elitetactical5872 ай бұрын
I don’t believe so. I would send over and email I thinks is part of the drop leg system
@FPS_Bang2 ай бұрын
Thanks
@ronalddesalles3172 ай бұрын
I have the same problem and it is VERY HARD to remove the slide from frame to clean the weapon. Not a happy camper. Thought the Glock performance trigger might help. NOT !
@jonshervey21462 ай бұрын
Just made it simple for me, thanks. Green Wilson looks and feels great
@highercaliberpodcast2 ай бұрын
🎉🎉🎉
@markjacksonmusic212 ай бұрын
Is that the only multiple reticle red dot sig makea?
@m2elitetactical5872 ай бұрын
No I think they have 3 or 4 different style optics that they make. 4t, 4t pro , 4XT pro , 8t
@user-ew3zy4kd7i2 ай бұрын
Thank you for the review - I just picked up the 4t pro and love it! Question - what sort of lanyard / necklace are you using for your mic? I want to try one for mine! Thank you
@m2elitetactical5872 ай бұрын
I love it. Here’s the link for the lanyard a.co/d/aHgdQQy
@ETheFuture2 ай бұрын
Courtesy tabs save time on the tape job too. Nice vid!
@Detman3293 ай бұрын
Anti what wing lol I swear guys love a bunch of novelty nonsense on a gun 😂😂
@kyzmn2 ай бұрын
it’s a thumb rest or drive, used in comp shooting to keep your gun more flat..
@njmattocks3 ай бұрын
What’s the base plate?
@m2elitetactical5873 ай бұрын
Radian TRU-17 base pads. That go with the magwell
@Risteard1563 ай бұрын
People said the glock 19 gen5 they have a lot of trouble with ammunition coming out of the gun that's why Police dept used the glock 19 gen3 for many and glock 26 for backup gun used same magazine 🇦🇹💯👍
@maxbeloat84883 ай бұрын
I want a backstrap that is bigger than the Large oem backstrap. Is this one bigger to allow more room for support hand?
@m2elitetactical5873 ай бұрын
It’s in between the large and medium.
@maxbeloat84883 ай бұрын
@@m2elitetactical587 just watched the video. Great vid. Dang I’ll have to stick with the large. Thanks!
@jaimecruz17553 ай бұрын
❤❤❤ she's gorgeous ❤❤❤
@1nup9653 ай бұрын
🤩🤩🤩
@becknit64693 ай бұрын
Trijicon, Aimpoint, or EOTech….or bust
@m2elitetactical5873 ай бұрын
I used to feel the same way. But this little guy changed my mind.
@chrismaple7792 ай бұрын
Mro is doo doo
@alitorlorth29793 ай бұрын
this is an especially helpful/useful bit of direction, exceedingly so,seeing as this intel is tribal knowledge at this point: this instruction, last i checked, cannot be located using official holosun or SS sources. a public service, i say.
Пікірлер
Have you seen any compatible holsters with a sidecar for this macro setup?
@@DAT_Concepts Ive been using a tier 1 concealed axis elite.
Hey man I seen that you just uploaded the new radian back strap and magwell, you prefer this Wilson combat grip or the radian setup better? Should say I just picked up the new fuse and that’s what it’s going to go on. Also assume that you’re from Ohio as well? Fellow buckeye? Thanks man.
Both are good. But I’ve been carrying the radian. I like the radian grip more and the magwell is really nice. And yes I’m from Cleveland. #keepohiostrong.
Thanks for the informative vid brother
Nice 👍👍👍
Holosun comes with 2 sets of screws. For the p365 do I use the thinner screws or the thicker?
How does this compare to the BCM angle forward grip ?
@@tarbo187 I have not used that one before . So I can’t give you comparisons but I like it because of the side a texture
Thank You !
Although Glock has very good quality control, compared to? Lets say Taurus, they still have their issues. Glock change the recoil slightly, Glock claims it helps with reliability and recoil? Haven't noticed any difference between the Glock 19 Gen 5 and Glock 19 Gen 4. The extractor, Ejector , recoil guide rod or any combination of is usual the cause of that type of issue.
Plz help!! I have the same setup now, I wanted a change from the Icarus grip module. My Wilson combat will not fit in my Icarus holster. Any recommendations for new holster with light bearing option?
I currently am using the tier one concealment holstet
@@m2elitetactical587 I emailed tier 1 and they’re telling me they don’t offer a holster for the Wilson combat yet. Did you pick the axis elite with the 365 xl and a tlr7-a light and it worked?
As soon as I saw that thing I got super excited. I rely on a thumb ledge to control recoil. I don’t know how people use pistols with no piont to create pressure on the muzzle. But shit that thing is 119 bucks. I’m not happy about it but they will be getting my money
Hey man, what iron sights were you running on this build?
Ameriglo suppressor height site
Do you still edc your G45? im kind of in a place where i still carry my glock 19 alot of the time vs the x macro, but not because of any specific reason just simply used to the glock.
Since I’ve got the X macro that is my main EDC. Sometime during the winter months I will carry my 320 but that is very rare.
Mine arrives tomorrow. Been using a BCM. But I have b5 stock and grip. So I figured might as well match. Curious to see if there is any difference between the two. Probably not, but whatever, it’s cool.
Just got mine in. It’s thinner and have more texture than the BCM. Love it!
How many mlok slots does it cover? Can you still use the slots immediately in front and in back of the VFG?
It fills on full slots and yes you can still use the other slots
Same exact issue here on my 43x
This vertical grip will complete my setup. Thanks for the video!🇺🇸
How did you do in the range with the red dot? Any tips to sight in? Just installed mine on my p365 XMACRO tacops
Whenever I’m sighting in a dot I alway start off with putting it in a rest or a bag, then I adjusting my left to right. Then I just it up and down. In the 3 round increments. That’s what has always worked for me that way
Great revue. Short and to the point!
Thank you 👍🏻
Looks almost identical to BCM
Nice…. been using the BCM, but the base is really bulky. Glad there is a new option.
I love B5.
Digging that new vgrip. B5 systems did right by the grip texture.
For sure. I was pumped when I seen at the show. I can’t wait for the new stuff they have coming too🤫🫣
wing worth it? I’d have to mod it slightly for an icarus grip
Yes it 100% worth it. It’s like a cheat code for your pistol
I tried one and couldn't get used to the height overbore and can't fit my ar into the tennis bag with it on.
How is the EPS with suppressor height sights? Been wanting this but dont want to change sights to standard
I have no issue. I also and target focused when shooting so all I see is the dot just floating over it. Hopefully that helps
My x macro comp had a dead trigger issue after about 1,500 rounds. Not cool.
I thought your shots were ricochetting to the left, hurt my damn brain for a sec
Put the break down in the description! I love it!
X Marco Holosun EPS carry Streamlight TLR7 sub Anitimatter wing Radian magwell + Backstrap Radian tru17 base pads
I picked up the mr920 elite over the war poet because I wanted to add a closed emitter optic, planning on the eps carry Mrs in green.
I would looking into the standard EPS for the pistol. You can go to opticsforce.com use code M2ET1177. It will save you 11%
I have two new g19 gen 5 pistols with this same “issue”. I don’t worry about it. It’s just different than my other generations
Mine works fine. Yours might be defective
I have the EXACT same problem. Bought the thing "brand new" get it home and its clearly had a few hundred rounds through it so i cleaned it and still have this issue. It's like the slide just doesnt go all the way back unless you really force it like you're trying to break it...anybody know whats causing this??? Maybe what might fix it???
When I still had it I replaced the extractor and ejector with new OEM parts and the issue went away
Woooooo
If you order the leg strap, does that swivel mount for it come with it??
I don’t believe so. I would send over and email I thinks is part of the drop leg system
Thanks
I have the same problem and it is VERY HARD to remove the slide from frame to clean the weapon. Not a happy camper. Thought the Glock performance trigger might help. NOT !
Just made it simple for me, thanks. Green Wilson looks and feels great
🎉🎉🎉
Is that the only multiple reticle red dot sig makea?
No I think they have 3 or 4 different style optics that they make. 4t, 4t pro , 4XT pro , 8t
Thank you for the review - I just picked up the 4t pro and love it! Question - what sort of lanyard / necklace are you using for your mic? I want to try one for mine! Thank you
I love it. Here’s the link for the lanyard a.co/d/aHgdQQy
Courtesy tabs save time on the tape job too. Nice vid!
Anti what wing lol I swear guys love a bunch of novelty nonsense on a gun 😂😂
it’s a thumb rest or drive, used in comp shooting to keep your gun more flat..
What’s the base plate?
Radian TRU-17 base pads. That go with the magwell
People said the glock 19 gen5 they have a lot of trouble with ammunition coming out of the gun that's why Police dept used the glock 19 gen3 for many and glock 26 for backup gun used same magazine 🇦🇹💯👍
I want a backstrap that is bigger than the Large oem backstrap. Is this one bigger to allow more room for support hand?
It’s in between the large and medium.
@@m2elitetactical587 just watched the video. Great vid. Dang I’ll have to stick with the large. Thanks!
❤❤❤ she's gorgeous ❤❤❤
🤩🤩🤩
Trijicon, Aimpoint, or EOTech….or bust
I used to feel the same way. But this little guy changed my mind.
Mro is doo doo
this is an especially helpful/useful bit of direction, exceedingly so,seeing as this intel is tribal knowledge at this point: this instruction, last i checked, cannot be located using official holosun or SS sources. a public service, i say.
$200 for a small piece of aluminum is outrageous.
does it work with tlr7a ?
Only tlr7 sub and x300b.