Пікірлер

• 
  @DonBMW11 күн бұрын

  Is this lift available for home installation?

• 
  @RotarySolutions7 күн бұрын

  The quick answer is yes, but Rotary products are sold through distribution. To contact your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @JacobStiegel27 күн бұрын

  Would this work for conventional car tires too, like a Toyota Corolla?

• 
  @RotarySolutions25 күн бұрын

  Sorry, but this tire changer is designed to work on large heavy duty truck tires. The tire changers we offer for standard size tires would be the R146, R247d, R1150, and the R1200. Videos for all of these changers can be found on Rotary's KZread channel.

• 
  @singhgagan974128 күн бұрын

  My rotary 12k lift shakes while lowering down

• 
  @RotarySolutions28 күн бұрын

  There are different models of that lift that have different maintenance requirements. We recommend you call Rotary Technical Support at 800-445-5438 with the model and serial number of the lift and they'd be happy to help you out.

• 
  @singhgagan974128 күн бұрын

  My rotary 12 k lift shakes so much when lowering down any idea

• 
  @RotarySolutions28 күн бұрын

  There are different models of that lift that have different maintenance requirements. We recommend you call Rotary Technical Support at 800-445-5438 with the model and serial number of the lift and they'd be happy to help you out.

• 
  @NVVD1117Ай бұрын

  What is the cost of this machine

• 
  @RotarySolutions28 күн бұрын

  Rotary products are sold through distribution. To find your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @samgonzalez509Ай бұрын

  Good instructions

• 
  @AJMALSHAJI-gc7mzАй бұрын

  How much

• 
  @RotarySolutionsАй бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @Steeg-vd7rf2 ай бұрын

  I love my old school Rotary inground..FP 46 H.. no maintenance..just keep dirt away from the plunger..

• 
  @bienvenidojr.mordeno84752 ай бұрын

  How much in ph

• 
  @RotarySolutions2 ай бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @donnajones26633 ай бұрын

  the locks will not release and the car is up in the air and I need to raise it in order for the locks release. What can I do

• 
  @RotarySolutions3 ай бұрын

  You will need to raise the lift so that it is off of the locks. Then follow the instructions in this video to adjust the latch locks. Once adjusted you should be able to pull down on the lock release and the latch locks should disengage.

• 
  @Steeg-vd7rf3 ай бұрын

  I would like to see Rotary corp ..bring back there old school inground lifts again.

• 
  @dennispope81603 ай бұрын

  Is this process done when the lift is sitting on a lock or not on a lock point? Up in the air or down on the ground?

• 
  @RotarySolutions3 ай бұрын

  Lock release cable adjustment should be done while the lift is NOT on the locks. It doesn't really matter if the lift is up in the air or down on the ground.

• 
  @jamesd77004 ай бұрын

  Can the Shockwave Equipment be installed later on a Rotary Lift that did not come with it? The SPO12-Wide specifically?

• 
  @RotarySolutions4 ай бұрын

  Yes you can equipment your standard lift with Shockwave, but it would require replacing the power unit and both hydraulic cylinders.

• 
  @mi.odi.15374 ай бұрын

  Sorry i need help in video 1:50 there's a blue button i press it and everything is changed... How i can change it back thanks for unswer

• 
  @RotarySolutions4 ай бұрын

  When you press the blue button it should ask “Are you Sure?” with green and red yes/no options. This puts the system in Quick Check Mode. To get out of QCM press the Red Arrow Back Button until the box at the bottom of the screen is no longer outlined in blue.

• 
  @gustavodominguez62474 ай бұрын

  It doesn't seem portable. it looks like the whole thing is stationary. The lift don't mave

• 
  @RotarySolutions4 ай бұрын

  Great question...The alignment system is mobile, meaning that there is no bulky tower so you do not need a dedicated bay. This true 3d system allows you to check a vehicle's alignment in any bay.

• 
  @gustavodominguez62474 ай бұрын

  @rotarylift with out a lift thinking of getting one for my home garage

• 
  @RotarySolutions3 ай бұрын

  While this system can do alignment checks without a lift, it is recommended that alignment adjustments are done on an alignment lift.

• 
  @autobodyrepairclearcoot41464 ай бұрын

  This Is my Dream Tire Machine If I Get My Own Shop I Will Get this Machine Inshallah I Use to Work At Wolmart Auto Care Center I destroyed My Back Lifting SUVs Rims I Like to Know How Much it Cost This Unit? Thanks

• 
  @oscarruiz42336 ай бұрын

  It looks great but please put the prices on your site instead of requiring an inquiry.

• 
  @stepheneggert94746 ай бұрын

  Keep it simple..my old school Rotary is still in service.. inground

• 
  @stepheneggert94746 ай бұрын

  I requed my inground rotary lift from an old service station, ..roof collapsed on it..not for scraping..but to put back in service..tested it with a portable gas compressor..to see if it would raise up..? Shure did!.. held air model FP 46 H .full hydraulic pump out oil , when they were tearing down the place I gave them 300 bucks to careful remove it. Put it on my trailer. Next is history.. fully restored.. piping control valves ..seal .. sandblasted casing.paint lastly truck bed liner rolled on. Oil tank now above ground..back in service for another 50 yrs ..

• 
  @olveramelinda6 ай бұрын

  I have one now thinking of getting another.

• 
  @algeriathelandofterrorists33297 ай бұрын

  Does it have the data for ppl in Europe or just for us market

• 
  @RotarySolutions7 ай бұрын

  The Rotary R1065 comes setup with the USA database, but the European database can be turned on also.

• 
  @hivepixels7 ай бұрын

  Is It EV ( Eletric Vehicle) compatible?

• 
  @RotarySolutions7 ай бұрын

  Good question. The answer is yes, our R3AC80 and R3AC60 models are compatible with electric vehicles.

• 
  @jerrylarson7238 ай бұрын

  I have a Rotary 560. Works alright . Not much support for the Machine in North eastern Nevada.

• 
  @berlogatirerepair90438 ай бұрын

  😮

• 
  @dr.chalbi39468 ай бұрын

  How much is this machine

• 
  @RotarySolutions8 ай бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @reynoldsaballo37088 ай бұрын

  How much

• 
  @RotarySolutions8 ай бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @brad33789 ай бұрын

  I can't tell the difference between this and the Trio arms.

• 
  @angelmatos59879 ай бұрын

  In this model R146RP you can work with tires larger than 40 inches in rim 17, which is used a lot in my Jeeps. 😊

• 
  @RotarySolutions9 ай бұрын

  Yes you can. The specs for this changer are - External Clamping 10" to 26", Internal Clamping 12" to 28", Max Tire Width 15", and Max Tire Diameter is 45".

• 
  @angelmatos59879 ай бұрын

  @@RotarySolutions thanks you for answers

• 
  @joshcoffman149 ай бұрын

  Like the hunter but better since it is manual and you don't have the sensors going bad every week.

• 
  @vaportrail63159 ай бұрын

  I'm 65 and so tired of Les Schwab discount tire tire Rama you name it tire shops that are supposed to be state of the art ruining my wheels. Most recently Ford 20-in with PVD chrome on it wheel. Sad but I will have to buy one one these machines because the tire shops will not buy a center post machine....some saying there to slow. I'm a welder by trade and in comparison this would be like someone not wanting to spend the money on a quick change weld lense because they don't think the lense can change fast enough to protect their eyes. Thank you for this video as next year I will be purchasing one of these machines. I think it is better than a corghi am 50 which was my other choice.

• 
  @jrewing80129 ай бұрын

  14000x4= 56000 Badass!

• 
  @jeank1d9 ай бұрын

  These videos are tremendously helpful as nobody else in my shop seems to worry about the very thing holding up something that could crush them in an instant. Thank you

• 
  @5kwattz10 ай бұрын

  Thanks 💯🍻

• 
  @KillSwitchGarage10 ай бұрын

  price?

• 
  @RotarySolutions9 ай бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @mikeceli10 ай бұрын

  Thank you for ansering all my questions to clarify the adjusting procedure!!

• 
  @kimquyluu677110 ай бұрын

  Thank you share clip

• 
  @viettran365811 ай бұрын

  My shop has been using this wrong for somany years

• 
  @mikeceli11 ай бұрын

  QUESTION. The side that clicks LAST is too LOOSE or too TIGHT?

• 
  @RotarySolutions11 ай бұрын

  The side that clicks last/later is generally found to be too loose. That side will need to be tightened up to match the 1st clicking side. *note, only adjust cables only while unloaded

• 
  @mikeceli11 ай бұрын

  The side that clicks "last" or "Later" than the other is too TIGHT or too LOOSE?

• 
  @RotarySolutions11 ай бұрын

  The side that clicks last/later is generally found to be too loose. That side will need to be tightened up to match the 1st clicking side. *note, only adjust cables only while unloaded

• 
  @mikeceli11 ай бұрын

  So, If the RIGHT (Power ) side clicks FIRST, do I tighten the RIGHT cable or LEFT cable? (IE Left adjust nut adjusts Right side and vice versa, I THINK). Thank you, Michael @@RotarySolutions

• 
  @RotarySolutions11 ай бұрын

  The side that clicks last would need to be tightened. So, if the right (Power unit) side clicks last then you will need to tighten the right side to match the left side.

• 
  @mikeceli11 ай бұрын

  WHICH adjusting NUT controls WHICH SIDE? In other words, does right nut tighten left side or right side. @@RotarySolutions

• 
  @RotarySolutions10 ай бұрын

  The nut on the right side controls the right side, this is the same with the left side. So, if the right (Power unit) side clicks last then you will need to tighten the right side to match the clicking on the left side.

• 
  @richeywcassel11 ай бұрын

  Will this work on a 218 inch Wheelbase?

• 
  @RotarySolutions11 ай бұрын

  Yes it will work on a 218" wheelbase.

• 
  @eprohoda Жыл бұрын

  thank you. really well channel- take it easy. :))

• 
  @RotarySolutions11 ай бұрын

  Thank you very much!

• 
  @KongZillaaaa Жыл бұрын

  😍

• 
  @vrajeshK.I.E.E Жыл бұрын

  How does this shockwave work?

• 
  @TomekinaOfa Жыл бұрын

  What causes your lift to not lower to locks evenly? My right side will come to a stop while the left side is still lowering down

• 
  @RotarySolutions Жыл бұрын

  Sounds like your lock release latch is stuck. Here's a video on how to adjust it. kzread.info/dash/bejne/ooCtk9GjXZq1lcY.html

• 
  @ablackformula Жыл бұрын

  Can you perform runout compensation with the vehicle in the air, if there's not enough room to push the vehicle?

• 
  @RotarySolutions Жыл бұрын

  Yes, lifted runout compensation is possible with the R1065.

• 
  @punjabiludhiana332 Жыл бұрын

  How much

• 
  @RotarySolutions Жыл бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @punjabiludhiana332 Жыл бұрын

  How much

• 
  @RotarySolutions Жыл бұрын

  Rotary products are sold through distribution. To find the your nearest Rotary Distributor please visit our website. rotarylift.com/contact-distributor/

• 
  @patrickgreenough9167 Жыл бұрын

  Thanks so much for this! Tightening the cable worked! I would’ve had my car stuck on there forever!

• 
  @calhoonwilliams1113 Жыл бұрын

  Man ide love to see what a hoist looks like that doesn't pass inspection for comparison