Пікірлер

• 
  @Bocce-Kaizer2 күн бұрын

  Very nice job and video editing. What model and year is red car? Gary

• 
  @JoeMcCoskey8 сағат бұрын

  It’s a 1972 Ford Galaxie

• 
  @JG-fg1ye3 күн бұрын

  It looks so nice 👍

• 
  @IconicK911 күн бұрын

  The manual says that a 3" flat surface, at a minimum, is required. It appears as though this would work fine if it's actually less than 3", as long as there's a gap on either side right?

• 
  @JoeMcCoskey10 күн бұрын

  The manual wants a 3” flat for the center guide width. I think it should be fine if the center guide hangs over the edge a little. I would just install it with the threshold as far to the outside as possible, this will give the center guide as much room as possible, but it connects to the threshold and can overhang inside the tub a little, if needed.

• 
  @IconicK99 күн бұрын

  @@JoeMcCoskey Thanks Joe, I really appreciate your response. Thank you for this video - huge help.

• 
  @jose222615 күн бұрын

  Didnt even see where you put the jigsaw piece.

• 
  @christys162016 күн бұрын

  Looks amazing 👏 I'm looking for a close up on the middle is that concrete drilling into the ground? What is that piece called ? How deep is that? What hardware is that called please

• 
  @JoeMcCoskey16 күн бұрын

  Thank you, The hardware on the bottom is called a gate cane bolt. I made the concrete piece.

• 
  @TheRobopw16 күн бұрын

  Not a very good video, didn't show us the hinges or the front of the gates, WTF??

• 
  @sohailgani3522 күн бұрын

  Great benefit for growing thick beard is your face wrinkles double chin is covered. Every day when you shave your skin becomes very hard when you stop shaving skin becomes softer. When I used to shave my age looked older now I have grown thicker beard people judge my age far more younger than my actual age that’s because double chin and other lines are covered with thick beard

• 
  @tarapringle1122 күн бұрын

  Does the paste come in a different color

• 
  @JoeMcCoskey21 күн бұрын

  You can buy color match caulking in different colors.

• 
  @RSchannel77723 күн бұрын

  That's a really good job. Looks great. Would be so good to have a parts list and instructions to help someone who's never done a fence before. Everything is so darn expensive to pay. In SoCal they want $450 labor just to install two ceiling fans. Without running any switches. Crazy

• 
  @zy823523 күн бұрын

  The beard suits you brother, I’m on my 7th month currently and am seeing big changes now

• 
  @Blinkers2007GameDev23 күн бұрын

  Thank you! I needed this

• 
  @user-gc6hr2sd7w26 күн бұрын

  What did you use on the outside of the gate as far as latch is concerned

• 
  @JoeMcCoskey26 күн бұрын

  The gate only opens from the inside.

• 
  @joerockt26 күн бұрын

  Dont know if you mentioned it, but what was the size of this door?

• 
  @JoeMcCoskey25 күн бұрын

  It’s for a five-foot tub. So, I went with the 56-60 size on width. It measures a little under 60” tall. It looks like they sell 59.75” & 62”. Those sizes are close enough to be similar.

• 
  @nikls5343Ай бұрын

  Crazy density, crazy steady growth. What a beard

• 
  @stuartpoltrock2904Ай бұрын

  would this plan work for a 20' gap?

• 
  @JoeMcCoskeyАй бұрын

  It probably would. The gates are strong. Finding strong enough hinges is an issue. I would recommend using rod ends and brackets, to make your own heavy duty hinges.

• 
  @davidsherrill9121Ай бұрын

  😆 🤣 😂 😹 😆 Please show us a new picture

• 
  @renwicksanderson9573Ай бұрын

  I lay brick for 40 year and that's the first time ever heard somebody charging $1,000 where I come from Best playing around $300 buck

• 
  @JoeMcCoskeyАй бұрын

  The previous comment you are referring to, is the cost of materials. No one charged any labor on this.

• 
  @milin620Ай бұрын

  Did the length of the door knob work or did you offset the depth so both ends met

• 
  @JoeMcCoskeyАй бұрын

  I cut out the pickets around the door knob but the thickness of the 2x4 wood at 1.5” inches is about the same as a front door. So it worked out.

• 
  @reochan2517Ай бұрын

  0:48 it’s so pretty how can you say big and ugly?

• 
  @daniellejohnson4771Ай бұрын

  Thank you!!!

• 
  @j9392Ай бұрын

  Can you instal a remote control opener to this type of gate?

• 
  @JoeMcCoskeyАй бұрын

  You can. Search, swing gate opener.

• 
  @brandonewithyouuuАй бұрын

  Nice job brotha

• 
  @1960jogo2 ай бұрын

  What brands name adhesives should be use for this type of shelves?

• 
  @JoeMcCoskey2 ай бұрын

  I used SikaBond, it takes a while to set. Other good options would be Loctite Power Grab and Gorilla construction adhesive. You can also get the other two in clear variants. If you use a non-clear construction adhesive, you could around it after it dries with color matching caulk.

• 
  @1960jogo2 ай бұрын

  👍🙏

• 
  @ArmChairKoalaBare2 ай бұрын

  i appreciate your service , i need to start making videos as well.

• 
  @fourcrazychildren2 ай бұрын

  Thank you for this video. Any idea on how long it "should" take to install?

• 
  @JoeMcCoskey2 ай бұрын

  I would say around three hours

• 
  @Cordovarubio2 ай бұрын

  What’s type of lumber did you use?

• 
  @JoeMcCoskey2 ай бұрын

  I believe I used pressure treated Hem-Fir lumber

• 
  @DreDay20002 ай бұрын

  Hey great video! Love the process and thorough explanation. I have a similar gate built a few years ago and it's leaning a bit these days due to the weight. I've added a gate wheel for support, I'm curious if yours is still holding up fine since you created this video ?... Also are you located in WA state? The houses look very similar to mine. Cheers!

• 
  @JoeMcCoskey2 ай бұрын

  Thanks, The gate is holding up but I ended up making my own beefy hinges and replaced the original hinges. I am in Washington.

• 
  @DR-rx4lk2 ай бұрын

  What kind of gate hardware. Link? @JoeMcCoskey

• 
  @JoeMcCoskey2 ай бұрын

  I don’t have a link but I used gate hinges from Lowes or Home Depot. A door handle for interior doors. The latch is also from Lowes or Home Depot.

• 
  @Noname-sl8un2 ай бұрын

  Just a quick tip. If you can't get the drums out hit it on the side with a hammer. It's a lot easier than hitting it on the back. Great video 💪

• 
  @sicks24382 ай бұрын

  thanks im removing an old brick mailbox that looks similar and wasnt sure where to start. we'll see if the center is filled like yours

• 
  @the_parker_g2 ай бұрын

  Gates look good. But I have never heard a more confusing explanation of tension versus compression bracing.

• 
  @Cordovarubio2 ай бұрын

  Where the link to the hinges?

• 
  @mercyrosato83803 ай бұрын

  Thanks for the video! How long did it take to complete the project? Can you paint the cap?

• 
  @JoeMcCoskey3 ай бұрын

  I spent two days demolishing the old columns and two days building the new columns. It would probably be best to buy a cap in the desired color. They can add color to the concrete mix when making the caps. I’m not sure if they offered that option at the time or if I ordered what they had. If you use concrete paint (paint marketed to be used on concrete) then it is something that can be done. Thank You

• 
  @ogclard14293 ай бұрын

  How the fuck you make a video and don’t say what size nuts are that’s the whole fucking point of watching the video

• 
  @IWASHM3 ай бұрын

  Looked way better puffy!

• 
  @mibarrioxsiempre3 ай бұрын

  Thx for the video!

• 
  @AntiDot703 ай бұрын

  I just installed mine today. 85"H on a shower, no tub. The factory instructions are arleight, but you still need to use your nugget and common sense as they are not perfect. Kohler says to install the bottom threshold 1/8" away from the front edge. While it might work in some situations, it didn't in mine as I would end up with the mounting screws in the literal edge of the drywall of the side walls. I used the bottom threshold with the door guide to position the assembly in the middle so that the edge supports were being secured to the studs. That being said, everything else went really smoothly. Big shout out to my 16-years-old son Max for landing his muscle with the very heavy glass panes.

• 
  @motok1d3 ай бұрын

  Looked like it had sagged by the time you fixed the pickets on

• 
  @snowglobe38024 ай бұрын

  Does that work in winter climates where ground is frozen

• 
  @JoeMcCoskey4 ай бұрын

  As long as it drains / doesn’t have standing water that would freeze, it would work.

• 
  @richardrobinson76454 ай бұрын

  Should have continued the lower brace up to the top corner mate.

• 
  @josephpfice4 ай бұрын

  Nice looking sturdy gate. Well done.

• 
  @Raul281534 ай бұрын

  Next time: treat the wood with oil or grease for mold release and if you can, make it with a slight taper narrow end deep in wide end at the top.

• 
  @parkerfreerangekids4 ай бұрын

  What type of waterproof construction adhesive did you use? Still holding well? Thanks for the video!

• 
  @JoeMcCoskey4 ай бұрын

  I used SikaBond construction adhesive. I don’t think much water is getting past the grout and caulking I used and I don’t really know what’s going on behind the tile but I believe it’s holding up well.

• 
  @parkerfreerangekids4 ай бұрын

  Thank you!

• 
  @skspqr3 ай бұрын

  Would it work on textured tiles?

• 
  @fes70673 ай бұрын

  Do you have a link to the shelves you used? Looks like a nice solution.

• 
  @JoeMcCoskey3 ай бұрын

  ​@@fes7067These are sold at Floor & Decor, and Lowes. Floor & Décor calls them a square edge corner shelf. Lowes calls them a Summerset corner shelf. It looks like Floor & Décor and Lowes offer different colors.

• 
  @joeconde30704 ай бұрын

  Only problem is you opening the gates. No room to swing doors!

• 
  @garrettginn99515 ай бұрын

  Amazing beard dude!

• 
  @no_I_dont_my_real_name_on_yt5 ай бұрын

  what are the two pieces on top of the t joints in the final shot? Mini expansion tanks? Copper pressure relief valves?

• 
  @JoeMcCoskey5 ай бұрын

  They are hammer arrestors. They absorb the shock of the water suddenly stopping, when the water is turned off.

• 
  @michaelmcdonnell59985 ай бұрын

  Great moustache too!

• 
  @terrydavis58506 ай бұрын

  thnku, great video

• 
  @baldnbearded6 ай бұрын

  Time for a beard video?

• 
  @thegunfight3r4156 ай бұрын

  Yeah grew very well but how did you menage to grow every color of hair known to men 🤣 Looks cool