Пікірлер

• 
  @simonnielsen53793 күн бұрын

  what model deltawing is this :)

• 
  @gamiviti48283 күн бұрын

  Deltawing 270, driver's side. www.gamiviti.com/ironman-awnings

• 
  @roberttaylor74514 күн бұрын

  No substitute for maxtrax

• 
  @uaebifvideo54725 күн бұрын

  Very nicely done, well explained!! Thank you!!.👍🏼Subed!!.

• 
  @gamiviti48285 күн бұрын

  awesome, thanks for watching!

• 
  @hdavies08 күн бұрын

  I think there is a rain pole, like the Alu-Cab awning, that tents up the centre... Looks like a solid awning. I agree with you about the Rhino Rack Batwing feet, brilliant idea. Wish they were sold separately... Great video, thanks. Subbed.

• 
  @jonathanmarte425113 күн бұрын

  Hey kit worked great but for some reason I can’t put the seat back in the truck. The bolts do not align correctly. What can I possibly be doing wrong ? Ps great video

• 
  @gamiviti482813 күн бұрын

  Yes this is fairly common.. you want to open up those holes in the seat bracket a little bit with either a step drill or file, enough so that the bolts can pass through. Otherwise if you bolt the seat down by forcing the bracket to align with the holes, the whole thing will be bound up and won't slide very well.

• 
  @jonathanmarte425111 күн бұрын

  @@gamiviti4828 thanks for your reply. I found the issue I took off both seats, took apart the 2 rods on each seat and mix matched them when I put it back. The drivers seat is a bit longer than the passenger seat rod so this caused issues.

• 
  @budnfriends17 күн бұрын

  Music too loud in the background during the process…. Distracted from the instructions. Otherwise, outstanding!

• 
  @أسفار26 күн бұрын

  Great vedio

• 
  @Q8PromodАй бұрын

  Thenk you 👌🏽

• 
  @greggfh1270Ай бұрын

  Where can I get this plate?

• 
  @gamiviti4828Ай бұрын

  right here www.gamiviti.com/dashboard-accessory-mounts

• 
  @NigelNaughtonАй бұрын

  Couple of comments. I like how you put vaseline on the lens for that cool effect and your zipper is down. 😜🤪 Having a bigger bag for the awning is nice but does that extra room flap around when driving? 1 more..how much does it weigh?

• 
  @gamiviti4828Ай бұрын

  44 pounds. don't notice any flapping while driving

• 
  @BerettaMatoАй бұрын

  Very cool

• 
  @t3angling575Ай бұрын

  A ton of options, exactly what the industry needs. That said I am running the Yakima Aerobars on the Skyline Towers. It runs everything I put on top of my truck topper (ARE), with one exception. When camping I want to be able to access the back of my pickup truck bed, meaning that will be my sleep area. The issue I have encountered is mounting the awning to the back of my truck. I travel with the awning attached to the side and use it there, but want the option to mount it on the back of the truck (stationary only - not traveling with it across the back). I am running the ARB 2500 x 2500, Touring Aluminum Housed Awning with Deluxe Awning Room. Since I have the Yakima rails and skyline towers already installed, and using the aerobar crossbars, what bracket system would you have to mount my awning on the side for travel, and be able to use my ARB Quick disconnect brackets to move the awning to rear of the truck for mounting and use while camping and fishing for several days or use at the beach, etc.?

• 
  @gamiviti4828Ай бұрын

  hi there, thanks for watching! Easiest way to solve this would be to replace those Aero Bars with some simple extrusion cross bars... www.gamiviti.com/cross-bars that would allow you to run our rack receivers on the side using the adapter plates, and run another set of rack receivers across the back, bolted sideways. Your awning would then be able to mount in either location. it might also be possible to drill through those aero bars to add the backing plates, and/or rack receivers, then bolt them through what you already have.

• 
  @t3angling575Ай бұрын

  @@gamiviti4828 awesome. Thank you for the fast response. Will have a look at them here shortly.

• 
  @marshallborges9606Ай бұрын

  Mute button, activate!!!

• 
  @myfalconry76Ай бұрын

  I was going to watch but the freaking music is ridiculous

• 
  @punktexasАй бұрын

  It doesn't look like the Ironman is available anymore.

• 
  @peterhudlow984Ай бұрын

  Tim, when clipping the rubber for the forward tower, do we need to use adhesive on the rubber after in order for it to stay in place? Thanks,

• 
  @gamiviti4828Ай бұрын

  yeah sometimes I'll put a little dab of that Dynaflex under the end, just to hold it down. Usually only if it won't stay down on its own

• 
  @carlossalgado3039Ай бұрын

  It’s a funny how that awning is so big but doesn’t provide that much shade

• 
  @Sandnessen2 ай бұрын

  Which car is used for the demonstration? A Nissan?

• 
  @gamiviti48282 ай бұрын

  4Runner.

• 
  @DevonReclaimed2 ай бұрын

  Thr holes provided dont accommodate a ram track im going to try the Yak Attack and if that doesn't work I guess im resigned to a single ball mount

• 
  @gamiviti48282 ай бұрын

  yes correct the holes are for the Yak Attack found on the website... just add a couple holes if you need it to work with other mounts.

• 
  @jammy939812 ай бұрын

  Making my decision easier! Got a question, do these come with dual color led lights? Oh wait, any plans on making a 60 series dash accessories mount like the ones you have on the 80 and other series?

• 
  @gamiviti48282 ай бұрын

  no lights with this one... and no, the 60 doesn't have a center channel speaker so can't really do a dash mount like the 200 series & GX models.

• 
  @NigelNaughton2 ай бұрын

  Nice stuff...I have a Prinsu rack for my 80 and this looks great!

• 
  @KGX4702 ай бұрын

  Also, is this a higher or low profile mount?

• 
  @KGX4702 ай бұрын

  Will it work with heavier 270 Awning?

• 
  @gamiviti48282 ай бұрын

  really intended to work with smaller to mid-sized awnings that use poles.

• 
  @NigelNaughton3 ай бұрын

  That's super nice! I'm always envious of the jeep and bronco guys (some trucks too) that already have that area easily ready for this mod. I've been thinking about how to make something work for my 80.

• 
  @gamiviti48282 ай бұрын

  thanks! and thanks for watching. too bad there isn't a similar removal panel in the 80 or 100 series, or we would have already created those as well. Only options I've seen so far involve drilling straight into the dash, which isn't ideal for most.

• 
  @holdenc30823 ай бұрын

  I have the same leaking air chuck. The gauge on the compressor is not accurate at all and tires end up over inflated. The single tire inflation hose is cheap and doesn’t get a good seal on some valve stems. I have yet to use the 4 tire inflation system. I’m not very happy so far for what I paid.

• 
  @AlexL-tk1th3 ай бұрын

  Very, very helpful. Thanks a million Tim! Please get different music 😀

• 
  @ishandebee88283 ай бұрын

  Please ditch the background dirge 🎸 it would be nice to listen to what you’re saying without any of that. Less is more. Thanks for the review 🙏🏼 😊

• 
  @danielpineda98423 ай бұрын

  Would this work on OEM roof rails for 2018 Nissan Armada ?

• 
  @gamiviti48283 ай бұрын

  doubtful. From the image searches it doesn't appear your rails have the inner channel required for the hardware.

• 
  @ZEROmg133 ай бұрын

  @8:44........."keeping the bugs out"..............lol...OOH NOO really???...lol

• 
  @ZEROmg133 ай бұрын

  i won't be looking any further into this awning manufacturer, why should you try and fix something that just came straight out of the box. not only did it rip but the zipper failed too.....yeah, no thanks #Nomadic

• 
  @adolmuh3 ай бұрын

  Koliko kosta komplett?

• 
  @ricklesmissingfingers3 ай бұрын

  Hey man whats the lead time on these? I need them desperately! Ready to order today

• 
  @gamiviti48283 ай бұрын

  Have another batch in production now, should have stock in about 3 weeks.

• 
  @deanobrovo85953 ай бұрын

  How much does it weigh when it's full?

• 
  @MikeOria4 ай бұрын

  I'm not going to buy an awning, but was very impressed that you deployed it in that wind and I've never seen anyone fly a drone in sleet. Kudos.

• 
  @metwono4 ай бұрын

  Thanks for this video. I appreciate the flap tip! ❤

• 
  @Brinaweenahwoo4 ай бұрын

  ... But can you use it with a rear lift door?

• 
  @gamiviti48284 ай бұрын

  Yes. usually requires you to lower the door to swing it out, then raise the door again up into it. this is worse with 4Runners, a little less worse on split tailgates, but totally doable. Also the flexibility of the Batwing works to your advantage here, compared to more rigid awnings like OVS.

• 
  @IronMountainPlumbing4 ай бұрын

  So with ram mount two hole mounts, go to Home Depot and grab some screws and locking nuts?

• 
  @gamiviti48284 ай бұрын

  Yes pretty much. Alternatively you could tap 1/4-20 threads into the accessory mount, then run screws in from the top and not have to mess with nuts. You can see this done in the GX460 video about the 3:15 mark kzread.info/dash/bejne/pGtqo9OPobCYaNo.html

• 
  @IronMountainPlumbing4 ай бұрын

  @@gamiviti4828 ah thank you for clearing that up!

• 
  @IronMountainPlumbing4 ай бұрын

  Just purchased and received. I want to ram mount my phone on one side and an iPad mini on the other side. How do they do while bouncing on the trail? Lots of movement?

• 
  @gamiviti48284 ай бұрын

  Really not much. And if something shakes, just position the bottom edge to rest against the dash. here's a longer video showing this product in action..kzread.info/dash/bejne/eKhoybp9erOtitY.html

• 
  @IronMountainPlumbing4 ай бұрын

  @@gamiviti4828 very nice! What tablet are you using for maps?

• 
  @gamiviti48284 ай бұрын

  @@IronMountainPlumbing ipad and Gaia. ;)

• 
  @IronMountainPlumbing4 ай бұрын

  @@gamiviti4828 awesome. I love gaia but now having the mount gives me an excuse to run my phone and a tablet. Thank you again!

• 
  @anatorres25134 ай бұрын

  I have a 3rd gen 4Runner with this work?

• 
  @gamiviti48284 ай бұрын

  doubtful. These bolt to the rail that runs lengthwise, similar to a 4th gen 4Runner, I don't think your 3rd gen has that.

• 
  @pmurphy126674 ай бұрын

  that fitting leaking is not good but the overall system is better than morrflate and the moab air compressor which are similar. So thors needs to do some QC on those fittings. Saw them at the CAlifornia Overland show this past weekend and was going to pull the trigger in this unit but decided to wait.

• 
  @andlibertyandjusticeforall4 ай бұрын

  This really isn't how you use recovery boards so it's kind of a shitty, unfair test. Yes they can help in situations like this, yes they can level the vehicle when camping, however, they are meant for beach recovery where the boards are placed in a hole at 45ish degrees.

• 
  @anthonybowen23474 ай бұрын

  Nice bracket 👌🏽

• 
  @marcnunes69164 ай бұрын

  Looks cheap. I would have just returned it.

• 
  @NigelNaughton5 ай бұрын

  That's awesome. Nice to have a quick release feature. Can you do some big kickflip ollies with that skatebaord by the door? 😁

• 
  @gamiviti48284 ай бұрын

  dude. I think I can still olly, but over a crack at best certainly not up a stair. Haven't landed a kickflip in a long while, I'm sure sure my wrists are up to the challenge! 😆

• 
  @MatthewFarr15 ай бұрын

  Great stuff!

• 
  @AstroBananna5 ай бұрын

  Which bracket do i need for the last gen of the 200 series land cruiser? How much weight does the bracket hold, hoping to get a 270 awning on it, and will i need cross bars to help support the weight?

• 
  @gamiviti48285 ай бұрын

  take a look at the OEM rail brackets, which will hold up to a Batwing awning www.gamiviti.com/awning-brackets

• 
  @AstroBananna5 ай бұрын

  Whats your website

• 
  @pathtwolight5 ай бұрын

  Your seat gear is a lifesaver. Nice work. Excellent video documentation. Again...nice work. Thank you!!!

• 
  @gamiviti48285 ай бұрын

  so glad it was helpful, and thanks for taking the time to watch the video & comment!

• 
  @nmills1385 ай бұрын

  Great and quick overview. Enjoyed seeing the inside of the box with the wiring in the bed of your Tundra.

• 
  @gamiviti48285 ай бұрын

  glad you liked it, thanks for watching! let me know if you have any questions

• 
  @Leonidimus595 ай бұрын

  Really nice towers and hard to find separately. Are they made from aluminum or steel?