I was waiting for kesterke to come do some roof hopping on a 146 boost!😂😂😂
@ethanwayne27969 күн бұрын
You guys fucked up, you shoulda bought a rototilt. Ive had nothing but problems with eng, and in 2 years of rototilt ive had absolutely none!!
@excavatorguy11 күн бұрын
Yep… good move… 2 separate channels
@clarencehock370411 күн бұрын
Do you get to keep stuff you find in those demo jobs?
@expeditionbasset16 күн бұрын
Crouching Tiger, Hidden Dragon from the old man backin up the trailer
@hanneakerlund160718 күн бұрын
the oilquick tilltrotarors gives more trouble then a normal tilltrotator with couplings
@tobybelmont398418 күн бұрын
Fun video, thanks. Could loose the vocals on the time lapse music.
@137newman19 күн бұрын
What lake is this on ?
@sickjohnson19 күн бұрын
Fancy tech seems to require a lot more maintenance Matt. Good to see a new video man.
@mrolsen698719 күн бұрын
Think about the rotator this way: you can buy either a new Polaris Boost or an old Yamaha Bravo, the Bravo will probably have less points that can break but you can't do tree riding like with the Boost... The different is that no snowmobile rider talks bad about the fact that they need to Heli in a new primary clutch... 😂😂
@davevmey20 күн бұрын
Always enjoy your videos. So cool working off of a barge.
@Evel75020 күн бұрын
Indeed a bit of lake history there, now gone. Nice job and video. Cheers
@filippersson309920 күн бұрын
Finally a video
@hagenrobles358220 күн бұрын
Hey Matt! You may have already addressed this but what are your sled plans? You keeping the 24 doo, 9r and boost? Or ya getting some new rides ?
@ridersride120 күн бұрын
good stuff Matt the new grapple looks fun like a Polaris, great when its running.
@jeffpierce343621 күн бұрын
Every summer I comment that I wish you would do more of these, so I won’t this summer! 😂👍
@unclegeek21 күн бұрын
Thanks for the video. Very cool
@TonyMontana-bl4oj21 күн бұрын
was beginning to think that gave up on the channel thanks for sharing great video the rotator is definitely worth it the grapple works well for demo/loading/manipulating material
@farmoranka221 күн бұрын
I used to do demo for a couple of years with a rotating grappler, saves the rototilt alot of wear and tear. It's nice to have an I-beam around to grab with the grappler for cleaning up too :) Here's a link to a wind turbin demo I did. Couldn't lift the wing axle with my 30 ton excavator, had to cut it in 2 pieces. Even then I could only drag it on the ground :D kzread.info/dash/bejne/qnZrsNGKqZeWZag.htmlsi=TioUXHeB6YatZPvF
@johnclarke818021 күн бұрын
Awesome video, thanks for sharing Matt!!
@dylancooper347622 күн бұрын
Thanks for the great video!
@dickdavidson361622 күн бұрын
Big score with all the useable timbers salvaged! Sweet❤
@dirtdigger900022 күн бұрын
All trucks are the same. Like cows
@Bearcats73722 күн бұрын
was wondering when you were going to start videoing your day job again, always look forward to it!
@AlexB-g2d22 күн бұрын
Literally this afternoon I searched this channel to see if you’ve been posting construction videos and I just wasn’t seeing them. You weren’t lol. now 5 hours later you posted a video on it!
@rods90722 күн бұрын
I want to see the end of the job after you get done building the new cabin and house both. Don’t know if your plan on showing that, but I’d like to see it.
@devonlethbridge22 күн бұрын
Finally got your lariat f250 with the 8ft bed hey?
@snobiwonkenobi22 күн бұрын
Thanks for the cool video. Always enjoy watching these also!
@KTMGREG5522 күн бұрын
Hell ya , been itchin for a summer upload 😎👌
@geoffbragg333122 күн бұрын
Love excavators, and one of my favorite you tubers doing his summer job!
@TheCatholicCowboy22 күн бұрын
Always awesome seeing you get more and more fluent with the tilt rotator. Too bad it shit out on you! Keep up the good videos
@ColinMcEvoy22 күн бұрын
"Thats not what I wanted" lmao
@freeriderearthworks888922 күн бұрын
Not at all 😂
@brandonsnell397722 күн бұрын
Love the track hoe content please 🙏 we need MORRRRRRRRRE!!!
@excavatorguy23 күн бұрын
Yeah… I love loading trucks. Never gets old.
@excavatorguy23 күн бұрын
Nice! Like the different camera angles
@aaronfurman820824 күн бұрын
First off, great job. I never thought about the bedrock issue but this was "easier" than I thought you would have had to do. Was this to ICC code? Also, for future, do you think you're going to rent a surveyor level? Seems like your tolerances for a job like this are....tight.
@johndaniels5407Ай бұрын
Great job bro 👍🏾 and thank you for sharing your experience 🎉
@glowvid2 ай бұрын
Did you flatten bedrock at pier's footer? Or just pinned with rebar and poured right on the slope?
@StillAliveAndKicking_Ай бұрын
It looks like they pinned and poured on the slope. I wonder if that rock is porous and hence the rebar could rust over time.
@tangoseal12 ай бұрын
how much does that system cost? There seems to be no published pricing for it.
@joelsalmond17883 ай бұрын
I let he air out because my legs are too short to reach, if I put in enough air for my short legs then when I hit a bump the seat bounces and bottoms out compressing my spine, if I put enough air so it won’t bottom out my legs don’t reach. Short person problems
@scottseaner89373 ай бұрын
Do you still like your iDig system?
@adrienfortin44115 ай бұрын
I like this 👌 that bardge tho. Not to sure on that. Im not much of a water person lol
@user-fb9jw8pd6t5 ай бұрын
nice work and nice machine. i have a 340 cat and i notice all the new ones the door wont shut properly. i think its because the cabs are so are tight. If you have the window open a crack you'll notice it will shut easy. looking at getting an idig system for my other machine since cat has that stock but i'm sure the cost of the cat system would be way over priced if you figure out what they added on the cost you pay from the dealer
@TheAlexErnstShow6 ай бұрын
What does this cost?
@LAKESIDEBOB17 ай бұрын
How about a show of the entry equipment fleet, looks like it is many pieces of equipment.
@NYa-mo7se9 ай бұрын
There’s a reason no deeres are used for tolerancing building roads and paths. You’re just smearing .
@mikepeters759 ай бұрын
Amazing video and work you're doing!! Do you haul that to the dump? and how much would the dump fee be on a house that large. Or how many tons would that house be around to haul to the dump? Thanks in advance, Mike
@joshuasemprebon38369 ай бұрын
What was wrong with that house? It looked nice with plenty of room like u said a maze but sweet.
@richardservatius54059 ай бұрын
you need a taller wheel house. or a control station along one side.
@AnthonyAlvarado7810 ай бұрын
Thank you. I wasnt sure what to do once i hit a huge rock on a slope, but sounds like i can pier into it. Very helpful.
Пікірлер
I was waiting for kesterke to come do some roof hopping on a 146 boost!😂😂😂
You guys fucked up, you shoulda bought a rototilt. Ive had nothing but problems with eng, and in 2 years of rototilt ive had absolutely none!!
Yep… good move… 2 separate channels
Do you get to keep stuff you find in those demo jobs?
Crouching Tiger, Hidden Dragon from the old man backin up the trailer
the oilquick tilltrotarors gives more trouble then a normal tilltrotator with couplings
Fun video, thanks. Could loose the vocals on the time lapse music.
What lake is this on ?
Fancy tech seems to require a lot more maintenance Matt. Good to see a new video man.
Think about the rotator this way: you can buy either a new Polaris Boost or an old Yamaha Bravo, the Bravo will probably have less points that can break but you can't do tree riding like with the Boost... The different is that no snowmobile rider talks bad about the fact that they need to Heli in a new primary clutch... 😂😂
Always enjoy your videos. So cool working off of a barge.
Indeed a bit of lake history there, now gone. Nice job and video. Cheers
Finally a video
Hey Matt! You may have already addressed this but what are your sled plans? You keeping the 24 doo, 9r and boost? Or ya getting some new rides ?
good stuff Matt the new grapple looks fun like a Polaris, great when its running.
Every summer I comment that I wish you would do more of these, so I won’t this summer! 😂👍
Thanks for the video. Very cool
was beginning to think that gave up on the channel thanks for sharing great video the rotator is definitely worth it the grapple works well for demo/loading/manipulating material
I used to do demo for a couple of years with a rotating grappler, saves the rototilt alot of wear and tear. It's nice to have an I-beam around to grab with the grappler for cleaning up too :) Here's a link to a wind turbin demo I did. Couldn't lift the wing axle with my 30 ton excavator, had to cut it in 2 pieces. Even then I could only drag it on the ground :D kzread.info/dash/bejne/qnZrsNGKqZeWZag.htmlsi=TioUXHeB6YatZPvF
Awesome video, thanks for sharing Matt!!
Thanks for the great video!
Big score with all the useable timbers salvaged! Sweet❤
All trucks are the same. Like cows
was wondering when you were going to start videoing your day job again, always look forward to it!
Literally this afternoon I searched this channel to see if you’ve been posting construction videos and I just wasn’t seeing them. You weren’t lol. now 5 hours later you posted a video on it!
I want to see the end of the job after you get done building the new cabin and house both. Don’t know if your plan on showing that, but I’d like to see it.
Finally got your lariat f250 with the 8ft bed hey?
Thanks for the cool video. Always enjoy watching these also!
Hell ya , been itchin for a summer upload 😎👌
Love excavators, and one of my favorite you tubers doing his summer job!
Always awesome seeing you get more and more fluent with the tilt rotator. Too bad it shit out on you! Keep up the good videos
"Thats not what I wanted" lmao
Not at all 😂
Love the track hoe content please 🙏 we need MORRRRRRRRRE!!!
Yeah… I love loading trucks. Never gets old.
Nice! Like the different camera angles
First off, great job. I never thought about the bedrock issue but this was "easier" than I thought you would have had to do. Was this to ICC code? Also, for future, do you think you're going to rent a surveyor level? Seems like your tolerances for a job like this are....tight.
Great job bro 👍🏾 and thank you for sharing your experience 🎉
Did you flatten bedrock at pier's footer? Or just pinned with rebar and poured right on the slope?
It looks like they pinned and poured on the slope. I wonder if that rock is porous and hence the rebar could rust over time.
how much does that system cost? There seems to be no published pricing for it.
I let he air out because my legs are too short to reach, if I put in enough air for my short legs then when I hit a bump the seat bounces and bottoms out compressing my spine, if I put enough air so it won’t bottom out my legs don’t reach. Short person problems
Do you still like your iDig system?
I like this 👌 that bardge tho. Not to sure on that. Im not much of a water person lol
nice work and nice machine. i have a 340 cat and i notice all the new ones the door wont shut properly. i think its because the cabs are so are tight. If you have the window open a crack you'll notice it will shut easy. looking at getting an idig system for my other machine since cat has that stock but i'm sure the cost of the cat system would be way over priced if you figure out what they added on the cost you pay from the dealer
What does this cost?
How about a show of the entry equipment fleet, looks like it is many pieces of equipment.
There’s a reason no deeres are used for tolerancing building roads and paths. You’re just smearing .
Amazing video and work you're doing!! Do you haul that to the dump? and how much would the dump fee be on a house that large. Or how many tons would that house be around to haul to the dump? Thanks in advance, Mike
What was wrong with that house? It looked nice with plenty of room like u said a maze but sweet.
you need a taller wheel house. or a control station along one side.
Thank you. I wasnt sure what to do once i hit a huge rock on a slope, but sounds like i can pier into it. Very helpful.