Absolutely great video. You covered every step. Thank you so much.
@JamesBetteleyАй бұрын
Great video. Thank you so much. This is just what I was looking for.
@jskidpatrolАй бұрын
Thanks James. Good luck with your project!
@charlest.reaves91932 ай бұрын
My screws that hold the camera in place is so rusted that the heads disintegrated when I attempted remove them. Now looking to replace the camera...sucks. Great video!!!
@jskidpatrol2 ай бұрын
Aww sorry man :(
@SingerPartyof62 ай бұрын
I had the same thing happen, what did you do to fix it? The heads actually broke the plastic. Not sure what the part is called to order a new one?
@jimharvard2 ай бұрын
Great video up to the end and then your forgot THE MOST IMPORTANT PART!! you should have shown how you grounded the two new axle wires and shown how you ran them up through the trailer to the front trailer plug!! finally, showing how you connected the new wires to the front plug would have finished the job. THE ENTIRE JOB is the part i was most interested in seeing.
@alimartinez57952 ай бұрын
great info, thank you!
@227lazer3 ай бұрын
Cool video
@randydinglehopper625 ай бұрын
Thank you!!
@JimCarberry5 ай бұрын
I followed this video and replaced my sensor. It worked Great! You do need to access from the back but using a long screw driver to tape the sensor wire to and pull through the hole is necessary. The back on my wb20k10027 came off with 4 screws. My oven door would not detach easily so I did the work with the door in place. Simple ! Don't be afraid to try it.
@MrMoosekiller315 ай бұрын
Thats what mines doing found a broken wire fixed it elements came on for bit then appears to heat up only slightly bottom lid is cold now too one looks like it works out new element also the first time I notice this so temp sensor is what I'm going after next lol except mines electric not gas so il watch anyway see if it's similar or not cheers 👍
@Zippyzape5 ай бұрын
Hi. I’d like to not only replace my camera, but also increase the resolution. Is this camera the exact replica of the original, or upgraded with better resolution ?
@jskidpatrol5 ай бұрын
Hiya. The replacement camera was the same as the original, which was really quite good and provided a clear image.
@izzyrosa36416 ай бұрын
Thank You, this helped
@cofarb6 ай бұрын
I probably need to make this exact repair, so I appreciate the video. HOWEVER, Dad's head is blocking the view part of the time. That is NOT helpful!
@Akiradion7 ай бұрын
I’m a woman and you made this look so easy , I’m going to give it a try THANKS 😊
@jskidpatrol7 ай бұрын
That’s so awesome! Go for it and good luck. You can do it 😊
@Ram03000gt7 ай бұрын
There's definitely alot to unpack from this movie. In the end we all have a different point of views since this movie is meant to get us to dig deep into our thoughts and actually use our brains and not be slaves to technology. Starting with the boat...The white loin. Named after a boat that came to America in the 1600s I believe with the first slaves which happens to be the same place named at the beach. I think it's referencing humans in general being consumed by the technology. It's definitely displaying this alot with everyone on their phones or devices knowing they don't have service or anything but still hope that it will miraculously work. Also G.H saying that the scariest thing about what his friend told him is that no one is actually in Control. Meaning Artificial intelligence taking control over humans , not necessarily by terminators but it displays this message by the whole 3 stage attack was NOT done by armies but was all done digitally. Force the broken society into chaos and turn on themselves since there is no physical enemy. Drones dropping terrorist threats to America but other areas getting a different message....Amanda's phone getting the hacking alert than disappear when she tried to show her husband. GH also referenced the Love Bug VIRUS leaning toward technology . And his daughter kept referencing power plants so possibly the loud noises they kept hearing where actual sound waves of radiation as described by some events that happened in Cuba. Which is why the son loses his teeth due to radiation. The name of the neighbors house just happens to be the Huxleys. Which might be referencing Aldous Huxley which has a book named Brave New World and is about society's losing their humanity due to advanced technology. Which is why you see all the animals group together in packs during stressful events and yet us as humans turn on each other. Still not sure what to think about this movie but it definitely is trying to tell us something is coming and we as a society have to change and maybe a total collapse is needed to rebuild society for us to learn that lesson the hard way since we lost all connection to the world we live in and we really have left the world behind.
@jarrodlee44887 ай бұрын
Great video.. executed and explained well.. Thank u
@meseahunt9 ай бұрын
i think the only thing u forgot to mention is the difference/importance between L & R side install?? 🤠
10 ай бұрын
This is as good as it gets
10 ай бұрын
Very good !!
@verystupidhandle10 ай бұрын
Ok so thank you again! I had my wife stare at brake controller while I Wiggled the Wires back an forth In the Axel! Bingo! Went from SH to .C.. Thank you again! Went to Harbor Freight for my Parts! THANK YOU!!!
@jskidpatrol10 ай бұрын
Sweet !
@verystupidhandle10 ай бұрын
Nice job! I am headed out to hunt down my short, same msg on brake ctrl. Going to check junction box on RV first, then replace my wire in axels.
@jskidpatrol10 ай бұрын
Good luck!
@verystupidhandle10 ай бұрын
@@jskidpatrol Had my wife stare at the brake controller as it showed SH. I got to wiggling the wires in the axel and bingo! Controller went to .C.. Thank you very much!
@jskidpatrol10 ай бұрын
@@verystupidhandle that’s so awesome! And a great idea too. OK, you know what to do 💪
@campingrhodys508211 ай бұрын
I am afraid to ask how much it was for each assembly.....
@JimC71411 ай бұрын
I had this exact problem , I found an identical wire inside the trailer axles, I used this exact method to hopefully permanently fix this issue. I will take a road trip next weekend , to be double sure! Thank you so very much
@jskidpatrol11 ай бұрын
Right on! I hope this works for you too. I have towed for hundreds of miles since this repair and all has worked perfectly. Safe travels !
@svaperio3463 Жыл бұрын
Thanks. Very helpful. I watched a bunch of brake vids and yours was the best for my situation.
@hamradionut Жыл бұрын
I am having the same problem you discribed. Already replaced all four brake assemblies and drums, etc. The problem went away for a while, but driving through some rain one trip I saw the problem again. I suppose the wires inside the axle's could be bad, but looking at the wires when I did the brakes, the wires seem to be like a coax type wire that's double insulated, unlike the wires you showed in the video. Could it still be the wires or do I have something else going on....Thanks, and enjoyed the video...
@firfyter Жыл бұрын
Great video! I recently replaced all of my trailer wiring but got a error message saying that I had a short. I didn't replace the wire inside the tube. Your video helped me know what to look for. Fixed my problem. Thanks
@jskidpatrol Жыл бұрын
That’s awesome. Nice job !
@user-bh3zo8ry6s Жыл бұрын
Great instructional video! I do have a question though. I have just purchased a new 2023 7x16 tandem axle cargo trailer slated for conversion to camping trailer. I installed a Primus IQ brake controller (hard wired one end plug and play the other end) on a 2021 F-150. I experienced very little brake authority with controller adjustments fully maxed out. My question is can/could/should this same method be used without removing the tire and wheel assembly? If so, could I trouble you to briefly explain the difference between the two procedures? Thanks in advance for your time and attention in this matter!
@octaviofuentes7781 Жыл бұрын
God had angels around you my man thanks for sharing your story
@jskidpatrol Жыл бұрын
Absolutely! God is so good and got us home safely that day.
@octaviofuentes7781 Жыл бұрын
Thanks for sharing my man your videos are awesome and they are helping me get my rv on the road before the summer ends Thanks again man
@octaviofuentes7781 Жыл бұрын
I have oL code on my brake controller teconsha I'm going to pull the wires from the axles out to check them out Im sure the problem is there and only one tire is braking hopefully your video can help me out thanks for sharing my man
@alancattoni8317 Жыл бұрын
Great job
@PakmanR3 Жыл бұрын
Thanks for the upload! Helped me understand how it all works
@remistgelais Жыл бұрын
Thank you for your help, you solved my 2 year old problem.
@jskidpatrol Жыл бұрын
That’s awesome!
@pattiesdoghouse1 Жыл бұрын
I realize this is an older video, but I am having break trouble. My question is what did you do with the other end? You have green and white wires - green wire to 7 pin connector and the white ground to frame?
@tonyvargas368 Жыл бұрын
I have the same controller, but it doesn’t always work. It seems to reset itself, but only half the zones. It’s annoying.
@mritron7649 Жыл бұрын
I'm curious how did you like the southwest brand brakes or truryde brand?
@mritron7649 Жыл бұрын
Put the grease in your palm and take bearing in other hand and smack it into the grease inline with the rollers and it will push through. Hard to describe but there are videos I'm sure that show packing bearings by hand.
@mrnotnomis Жыл бұрын
Working on a 09 that's blowing park light fuses. I suspect the license plate light sockets, but I am struggling to get to them. Those 4 bolts for the panel aren't captured tightly on the back side, so they are just spinning when I try to remove them. ALL of them are like that. I might have to resort to some sort percussive persuasion.
@KL_daddy Жыл бұрын
Seems like im the only lucky one that had the pleasure of all 4 nuts just spinning along with the bolt lucky me 😔
@craigdavis1503 Жыл бұрын
I found the same problem on my trailer.
@scotttomberlin Жыл бұрын
You never wired it back up.
@jskidpatrol Жыл бұрын
Can confirm, the job got finished :-)
@michaelwest4525 Жыл бұрын
I was having this problem on my trailer after I had installed complete new brakes . I suspected maybe the 7 wire plug but this would have been a good place to look . I never got to run it down since I sold the trailer .
@rvproductions3632 Жыл бұрын
Mucho bueno amigo saludos Desde mexico
@tedbaxter5234 Жыл бұрын
Thank you for the time and effort to produce this video!
@comaradelee Жыл бұрын
is it really hard to remove the lens of thee factory back up cam?
@jskidpatrol Жыл бұрын
Just for giggles I tried to take the old lens off the camera and broke it. It does not appear to be removable.
@comaradelee Жыл бұрын
@@jskidpatrol thank you.
@tedbaxter5234 Жыл бұрын
Great video, thank you!
@abu_zaye-8502 Жыл бұрын
شكراً 👍😃
@maceggleston Жыл бұрын
Good stuff. Excellent DIY video.
@joelhiltz3329 Жыл бұрын
Get rid of the dirty tennis shoes
@joelhiltz3329 Жыл бұрын
One of many repair videos nothing new here.
@LarryProchazka Жыл бұрын
Hello! I have replaced the sensor in my GE oven. My baking temperatures, tested with Thermoworks Chef Alarm, is really inconsistent! I'm wondering what else I can do or if it is worth it? When the range "pings" that the oven is ready, temperature set at 370°, the actual temperature is 312°. It drops temperature before reaching 350° and sort of yoyo's between 328 and 385. Is that something that is fixable? Thank you!
Пікірлер
use a heat gun and not a torch
Absolutely great video. You covered every step. Thank you so much.
Great video. Thank you so much. This is just what I was looking for.
Thanks James. Good luck with your project!
My screws that hold the camera in place is so rusted that the heads disintegrated when I attempted remove them. Now looking to replace the camera...sucks. Great video!!!
Aww sorry man :(
I had the same thing happen, what did you do to fix it? The heads actually broke the plastic. Not sure what the part is called to order a new one?
Great video up to the end and then your forgot THE MOST IMPORTANT PART!! you should have shown how you grounded the two new axle wires and shown how you ran them up through the trailer to the front trailer plug!! finally, showing how you connected the new wires to the front plug would have finished the job. THE ENTIRE JOB is the part i was most interested in seeing.
great info, thank you!
Cool video
Thank you!!
I followed this video and replaced my sensor. It worked Great! You do need to access from the back but using a long screw driver to tape the sensor wire to and pull through the hole is necessary. The back on my wb20k10027 came off with 4 screws. My oven door would not detach easily so I did the work with the door in place. Simple ! Don't be afraid to try it.
Thats what mines doing found a broken wire fixed it elements came on for bit then appears to heat up only slightly bottom lid is cold now too one looks like it works out new element also the first time I notice this so temp sensor is what I'm going after next lol except mines electric not gas so il watch anyway see if it's similar or not cheers 👍
Hi. I’d like to not only replace my camera, but also increase the resolution. Is this camera the exact replica of the original, or upgraded with better resolution ?
Hiya. The replacement camera was the same as the original, which was really quite good and provided a clear image.
Thank You, this helped
I probably need to make this exact repair, so I appreciate the video. HOWEVER, Dad's head is blocking the view part of the time. That is NOT helpful!
I’m a woman and you made this look so easy , I’m going to give it a try THANKS 😊
That’s so awesome! Go for it and good luck. You can do it 😊
There's definitely alot to unpack from this movie. In the end we all have a different point of views since this movie is meant to get us to dig deep into our thoughts and actually use our brains and not be slaves to technology. Starting with the boat...The white loin. Named after a boat that came to America in the 1600s I believe with the first slaves which happens to be the same place named at the beach. I think it's referencing humans in general being consumed by the technology. It's definitely displaying this alot with everyone on their phones or devices knowing they don't have service or anything but still hope that it will miraculously work. Also G.H saying that the scariest thing about what his friend told him is that no one is actually in Control. Meaning Artificial intelligence taking control over humans , not necessarily by terminators but it displays this message by the whole 3 stage attack was NOT done by armies but was all done digitally. Force the broken society into chaos and turn on themselves since there is no physical enemy. Drones dropping terrorist threats to America but other areas getting a different message....Amanda's phone getting the hacking alert than disappear when she tried to show her husband. GH also referenced the Love Bug VIRUS leaning toward technology . And his daughter kept referencing power plants so possibly the loud noises they kept hearing where actual sound waves of radiation as described by some events that happened in Cuba. Which is why the son loses his teeth due to radiation. The name of the neighbors house just happens to be the Huxleys. Which might be referencing Aldous Huxley which has a book named Brave New World and is about society's losing their humanity due to advanced technology. Which is why you see all the animals group together in packs during stressful events and yet us as humans turn on each other. Still not sure what to think about this movie but it definitely is trying to tell us something is coming and we as a society have to change and maybe a total collapse is needed to rebuild society for us to learn that lesson the hard way since we lost all connection to the world we live in and we really have left the world behind.
Great video.. executed and explained well.. Thank u
i think the only thing u forgot to mention is the difference/importance between L & R side install?? 🤠
This is as good as it gets
Very good !!
Ok so thank you again! I had my wife stare at brake controller while I Wiggled the Wires back an forth In the Axel! Bingo! Went from SH to .C.. Thank you again! Went to Harbor Freight for my Parts! THANK YOU!!!
Sweet !
Nice job! I am headed out to hunt down my short, same msg on brake ctrl. Going to check junction box on RV first, then replace my wire in axels.
Good luck!
@@jskidpatrol Had my wife stare at the brake controller as it showed SH. I got to wiggling the wires in the axel and bingo! Controller went to .C.. Thank you very much!
@@verystupidhandle that’s so awesome! And a great idea too. OK, you know what to do 💪
I am afraid to ask how much it was for each assembly.....
I had this exact problem , I found an identical wire inside the trailer axles, I used this exact method to hopefully permanently fix this issue. I will take a road trip next weekend , to be double sure! Thank you so very much
Right on! I hope this works for you too. I have towed for hundreds of miles since this repair and all has worked perfectly. Safe travels !
Thanks. Very helpful. I watched a bunch of brake vids and yours was the best for my situation.
I am having the same problem you discribed. Already replaced all four brake assemblies and drums, etc. The problem went away for a while, but driving through some rain one trip I saw the problem again. I suppose the wires inside the axle's could be bad, but looking at the wires when I did the brakes, the wires seem to be like a coax type wire that's double insulated, unlike the wires you showed in the video. Could it still be the wires or do I have something else going on....Thanks, and enjoyed the video...
Great video! I recently replaced all of my trailer wiring but got a error message saying that I had a short. I didn't replace the wire inside the tube. Your video helped me know what to look for. Fixed my problem. Thanks
That’s awesome. Nice job !
Great instructional video! I do have a question though. I have just purchased a new 2023 7x16 tandem axle cargo trailer slated for conversion to camping trailer. I installed a Primus IQ brake controller (hard wired one end plug and play the other end) on a 2021 F-150. I experienced very little brake authority with controller adjustments fully maxed out. My question is can/could/should this same method be used without removing the tire and wheel assembly? If so, could I trouble you to briefly explain the difference between the two procedures? Thanks in advance for your time and attention in this matter!
God had angels around you my man thanks for sharing your story
Absolutely! God is so good and got us home safely that day.
Thanks for sharing my man your videos are awesome and they are helping me get my rv on the road before the summer ends Thanks again man
I have oL code on my brake controller teconsha I'm going to pull the wires from the axles out to check them out Im sure the problem is there and only one tire is braking hopefully your video can help me out thanks for sharing my man
Great job
Thanks for the upload! Helped me understand how it all works
Thank you for your help, you solved my 2 year old problem.
That’s awesome!
I realize this is an older video, but I am having break trouble. My question is what did you do with the other end? You have green and white wires - green wire to 7 pin connector and the white ground to frame?
I have the same controller, but it doesn’t always work. It seems to reset itself, but only half the zones. It’s annoying.
I'm curious how did you like the southwest brand brakes or truryde brand?
Put the grease in your palm and take bearing in other hand and smack it into the grease inline with the rollers and it will push through. Hard to describe but there are videos I'm sure that show packing bearings by hand.
Working on a 09 that's blowing park light fuses. I suspect the license plate light sockets, but I am struggling to get to them. Those 4 bolts for the panel aren't captured tightly on the back side, so they are just spinning when I try to remove them. ALL of them are like that. I might have to resort to some sort percussive persuasion.
Seems like im the only lucky one that had the pleasure of all 4 nuts just spinning along with the bolt lucky me 😔
I found the same problem on my trailer.
You never wired it back up.
Can confirm, the job got finished :-)
I was having this problem on my trailer after I had installed complete new brakes . I suspected maybe the 7 wire plug but this would have been a good place to look . I never got to run it down since I sold the trailer .
Mucho bueno amigo saludos Desde mexico
Thank you for the time and effort to produce this video!
is it really hard to remove the lens of thee factory back up cam?
Just for giggles I tried to take the old lens off the camera and broke it. It does not appear to be removable.
@@jskidpatrol thank you.
Great video, thank you!
شكراً 👍😃
Good stuff. Excellent DIY video.
Get rid of the dirty tennis shoes
One of many repair videos nothing new here.
Hello! I have replaced the sensor in my GE oven. My baking temperatures, tested with Thermoworks Chef Alarm, is really inconsistent! I'm wondering what else I can do or if it is worth it? When the range "pings" that the oven is ready, temperature set at 370°, the actual temperature is 312°. It drops temperature before reaching 350° and sort of yoyo's between 328 and 385. Is that something that is fixable? Thank you!