Пікірлер

• 
  @browns247022 күн бұрын

  Xl5 is NOT brushless compatible..you need to move to the Velinion series

• 
  @fairdale139Ай бұрын

  Please can you tell us in detail of all the items that you've changed and from where you bought them? Thank you

• 
  @luiz4x2Ай бұрын

  I can put portal axle in original suspension links?

• 
  @berrizolonte1855Ай бұрын

  Hi, can you tell me how wide the chassis is? Thanks!

• 
  @paulshackleton862Ай бұрын

  Lifesaver, thanks mate!

• 
  @zoridor16Ай бұрын

  I love these cars! Currently there are many videos that talk in detail about the durability of VRX cars, I dare say that HSP (EXCEED OR REDCAT) generates more confidence in me because many times the models have many parts in common and there is a very large group of people . What do you have a lot of experience with HSP nitro cars, is THE VRX cheaper? How about the quality of the nitro engines? Can a banggod nitro engine last 50 uses without problems? How about the stock electronics on the vrx? Can the servos and motors last after long-term use? Or will they fail after a short time of use? greetings friend! excellent comparison, I wish there were more videos that tell us if the VRX is a good long-term car (1 or 2 years) with about 50 uses we can draw very accurate conclusions

• 
  @Reno-SenpaiАй бұрын

  I'm late AF but your wheels are on the wrong way bro. 💀 Pretty sure you figured that out by now though lol!

• 
  @martintrj5620Ай бұрын

  I own the hbx2196, awesome drift cars, I wish they had more upgrade support, such great potential! Great skills btw

• 
  @fithrikarim7203Ай бұрын

  is this the same 45esc or you swapped it ??? really need to know your setup 😬😬😬

• 
  @fithrikarim7203Ай бұрын

  bcs i just bought me a 120a esc cheap one from china + rocket rc 3650 2300kv and run like hell like yours. But unfortunately my 3s 3300mah bginning to swell 😢 help i need advice

• 
  @greenie432 ай бұрын

  Nice informative video! I just now changed my titan 21t 550 motor for the 12t titan 550 motor on my trx4. Plugged in backwards obviously , I wanna go fast!! Subscribed to support our community!!😎👍

• 
  @m3estebanm32 ай бұрын

  Mi frustración es grande al ver videos donde funciona bien, mi camioneta desde su primer pila falla, ni que decir si uso 3s, me dio mucho coraje haber gastado en algo que no sirve.

• 
  @francoisvortman83582 ай бұрын

  Can you send me a link on to where i could buy these 2 rcs please

• 
  @blaircooper99562 ай бұрын

  seems a little slow compared to some of the 1/10 scale

• 
  @user-wn2wq9me1r2 ай бұрын

  My Traxxas ESC xl5 doesn't have a 3s emblem on it but it has the heat sink

• 
  @dbomob2 ай бұрын

  Thanks for the video. But dude, thirteen+ minutes before showing how to do it? For anyone curious. After connecting the receiver, you press the small button on the side of the receiver for three seconds to bind it to the transmitter. You press the same button three times quickly to enable the gyro. There you go, saved you fifteen minutes.

• 
  @zoridor163 ай бұрын

  Hi, friend! We 100% recommend this stroller! What is the quality of the motor and its lifespan? Pros and cons? Greetings :) 

• 
  @greeny90583 ай бұрын

  Hi mate, thanks for the great video. When you got the pinion did you get another push fit

• 
  @hughrs3 ай бұрын

  I can't find the video of the brushless one ripin?

• 
  @lightningrc13 ай бұрын

  Nice car

• 
  @aLJar3dMusic-cv8sr4 ай бұрын

  i got the flyhal fc610 and i like it. oil spring shocks, metal gears metal diffs. cheap hobby grade 2 batterys and tons of fun! planning to add more lights w a separate battery and and bigger wheels

• 
  @user-re9oi2kw6x4 ай бұрын

  I’m new to this, I recently bought myself a nitro Chinese VRX and when running it in, the sound is cutting, but in the KZread video it’s soft (I haven’t touched the corburetor needles yet). Could this be due to the fact that I didn’t drop nitromethane into the engine when I first started it? Or is there no need to worry about this? And is it still necessary to blow out the burnt fuel that remains in the engine after driving?

• 
  @user-re9oi2kw6x4 ай бұрын

  What position should the high speed needle be in?

• 
  @azri-za4 ай бұрын

  It run well on the grass ya..

• 
  @marco101695 ай бұрын

  How was the first start up, did you have to adjust anything with the motor?

• 
  @nathanjorstad4795 ай бұрын

  Does the stock electric speed control come with Lipo cut off mode for Lipo usage

• 
  @zoridor165 ай бұрын

  ooo wow! I was just looking for a video that talked about the improvements of this cart with a 12-turn brushed motor (for me the best improvement) without brushes, not because according to me we could break some gear of this 2wd transmission! Is the gearbox sturdy? How has it performed? greetings! How many cycles of use have you given it! What variator did you install? new subs

• 
  @MrXerc5 ай бұрын

  stock servo ?

• 
  @mikecostello96715 ай бұрын

  How do you like those axles? Looking into alternatives to the stock style metals ones. Seen these on Amazon. Let me know! Sick build.

• 
  @user-cd6bp7iq8o5 ай бұрын

  I payed bangood over $50 for a battery pack I never got. Don't blame you I'm done with bangood too. Glad you told everyone about this place.

• 
  @TasosX5 ай бұрын

  Great video my friend. Do you know A252 the wheel base ?

• 
  @CODACAIN766 ай бұрын

  I’ll just buy a different body as well wider wheels

• 
  @dalaw66006 ай бұрын

  Does this kit fit the Wpl c24. They look very similar underneath

• 
  @mikecostello96715 ай бұрын

  I believe the gearboxes and motors are interchangeable. Not so sure about the suspension. My buddy has the wpl I have d90 both so cool!

• 
  @BabyAbarth6 ай бұрын

  Nice video Dave, very informative.. Is it possible to install a 15T or would the mesh be too right?

• 
  @alexandreblaney-thivierge38096 ай бұрын

  shim the diff and

• 
  @alexandreblaney-thivierge38096 ай бұрын

  steel shaft 75-85mm cvd aliexpress

• 
  @DanP1007 ай бұрын

  Sick! I'm about to do the same thing!

• 
  @howitzerm7778 ай бұрын

  Hi, do you know what pitch is this gear?

• 
  @eduardocamarena46988 ай бұрын

  What tyres you are shoeing in each model in this video? Please

• 
  @RCRoads8 ай бұрын

  Nice job going over the DBX10. Sweet looking RC. 👍👍

• 
  @makinandy38 ай бұрын

  Para que es eso de tocar el boton 3 veces? El receptor de serie? Que funcion tiene? El mio corre, frena , reversa, todo bien, no entiendo 😂

• 
  @user-xe6pu2vp2v9 ай бұрын

  About how many u.s dollars I have same truck

• 
  @pzchuky9 ай бұрын

  I know this is a old video but your running the wrong pitch pinon gear. The pinion on the motor looks to be a 48pitch and the spur is mod 0.6 thats probably why your spur screwed up.

• 
  @slottygw2wvw8429 ай бұрын

  Vrx better will not swirl around.... hsp will never drive straight same pricing

• 
  @daniel-is6zf9 ай бұрын

  I'm trying to find the parts to make my f.18 in my xxx n1 storm 2/3speed, it has a huge gate where the transmission would seat and either side has a good 10mm Inc shims, I think "think" being the keyword here haha... I think I easily have space for 2/3speed anyone know what I'm looking for as I can't find a straightforward kit for it or specifically what parts

• 
  @daniel-is6zf9 ай бұрын

  I remember helping my friend put one together but that was 15 years ago but generally doesn't look all to dissimilar

• 
  @Esse_P10 ай бұрын

  is the stock brushless motor shaft 3.175mm or 5mm?

• 
  @mishablade989210 ай бұрын

  It always says in the manuals for nitro RCs never operate in public places.

• 
  @scuffedvanz94114 ай бұрын

  Tell that to every other person aswell then

• 
  @polishguywithhardtospellna822710 ай бұрын

  Hey, does it like to tip over a lot?

• 
  @carosworldofficial10 ай бұрын

  Nice car! Probably getting one soon. 190mm or 200mm body?

• 
  @zythosx406711 ай бұрын

  Looks sick! I'm new to RC cars and waiting for mine to arrive, it's also an HBX 2188a. How'd you wire up the lights?

• 
  @garygallant539011 ай бұрын

  Great video. I agree with all of your assessments and opinions.