Пікірлер

• 
  @brittneyblackmore488322 сағат бұрын

  Tell that person to undercoat that rusty frame

• 
  @adamedds24187 күн бұрын

  So it was the computer

• 
  @ralfsautomotive6 күн бұрын

  5V Reference with intermittent problems(dropouts) is a very common thing in GM Computers! Yes it was the Problem .

• 
  @adamedds24186 күн бұрын

  Thank you and i have an 07 yukon doing the same thing.​@ralfsautomotive

• 
  @kalimaurence7 күн бұрын

  It is amazing how you can find a video of absolutely everything on KZread, you need help with a piece of metal that 99% of the ppl won't see in their life, there is one guy on KZread that shows it

• 
  @andrewfralick26637 күн бұрын

  Hey sir may I ask the torque sequence and torque spec for the head?

• 
  @ralfsautomotive6 күн бұрын

  If in doubt from the middle out! Always remember that!! Don't matter what you working with! Torque spec is on google. Faster than what I can look it up LOL

• 
  @SukhdevSingh-yr3oc7 күн бұрын

  Thank you sir

• 
  @13ghosts507 күн бұрын

  I have a truck that has zerks on one side of the vehicle and none on the other side of the vehicle. Makes no sense.

• 
  @ralfsautomotive7 күн бұрын

  Makes Perfect sense LOL one is Aftermarket the other is stock type.

• 
  @davidessien546510 күн бұрын

  Very nice video

• 
  @davidessien546510 күн бұрын

  Nice video! My client's own had a similar issue so I bleed the clutch and still to no avail. I've even replaced only the kit inside the upper clutch but the problem of a sponge clutch and no gear still persist. I've checked scrutingly for signs of leakage carefully while someone pressed the clutch, i found out that the down clutch nipple doesn't hold clutch hydraulic fluid! It goes out gently, and also the clutch fluid was replaced with a new one. Nevertheless, it's still very darkened in color. Please, how do I fix the issues? Darkened fluid, soft clutch pedal, and a most especially the leak at the down clutch bleeder or nipple.

• 
  @look876611 күн бұрын

  I had a similar experience 2018 Ford Focus Titanium. Turns out the key fob I had was not functional. Went to the store. Was away from car for 1 hour. Came back, key fob did not work. Used physical key to enter car. Thought issue may be tied to car being in hotter weather. Power locks functional, car reporting No key detected. Placed key on center console key location, still no key detected. Went to nearby store & replaced fob battery, still saw same key not detected behavior. Got cab ride back to apartment, got spare key fob & returned to car. spare key worked for my case it wasn't a fuse issue. Hope this helps others, I recommend trying a spare key if seeing issues. Planning to get a radio frequency reader to test the bad key now...

• 
  @andresgonzalezaraiza599410 күн бұрын

  Iam having the same issue with mi 2016 FF titanium, ive just replace the fuse and see if that works. I dont have the spare key, so i will have to buy a new one in case this doest work. I will let you guys know

• 
  @look87669 күн бұрын

  ​@@andresgonzalezaraiza5994 Turns out my issue wasn't the key. Same issue popped up with spare key a 2 days later. Then when it did recognize the key it became locked up and I needed to have it towed after stopping for a red light. I had it towed to ford service center, will update with their findings.

• 
  @look87669 күн бұрын

  Update ford found a 50 amp blown fuse they are fixing

• 
  @andresgonzalezaraiza59948 күн бұрын

  @@look8766 what was the cost for replacing the fuse? Here in Mexico was 3 usd for the fuse and did it my self. I didnt have the opportunity yet to drive some miles to see if that helped. Please let me know if that fixed the issue.

• 
  @look87668 күн бұрын

  @@andresgonzalezaraiza5994 Dealer comments after fixing "Customer states dash is reading key not detected. Replace 50 AMP fuse on battery terminal. Red Fuse, performed wiggle test on battery breakout junction box found 50 amp fuse blowing intermittently. Replaced and retest passed. 50 amp mini fuse replaced." Cost for me was $16 for fuse then $375 diagnostic + some other for general maintenance options in Seattle, Washington. nice job fixing yourself! I took the dealer approach so was expecting the big costs.

• 
  @Stanging8411 күн бұрын

  How many miles on this charger?? Ours have over 200k on it and still running smooth and strong!

• 
  @ralfsautomotive11 күн бұрын

  Exception to the rule. These a garbage. 130K on Car Replacement was 110K and it is already bad again.

• 
  @sedgwickmance844514 күн бұрын

  Talk so much I could not watch

• 
  @ralfsautomotive14 күн бұрын

  Very easy! Don't!!

• 
  @SteveZentner20 күн бұрын

  I've got the three bolts out of the right side axle. Can't get it to clear the power steering pump. Did you split the shaft to get some wiggle room?

• 
  @donnieharrelson171220 күн бұрын

  How do you know that the gears are lined up correctly. Thankyou Sir. Appreciate you.

• 
  @ralfsautomotive20 күн бұрын

  Don't know how to explain that I just know my position.

• 
  @alejandrovega807921 күн бұрын

  Where did you get your engine cause I want to swap my accord current engine with another

• 
  @JustinFrieze23 күн бұрын

  "lot of these bolts have thread locker thats it - the end. " I Love the dialogue! honestly! and the fact that you kept getting interrupted shows how much of a pain in the ass it is to do work sometimes! I found your video while researching the breakdown to do my truck and while its all pretty much what I figured it'd be; I actually appreciated more that you didn't spend a whole lot of time bashing the fact that its italian made, the position of where the sensor is is dumb, or that its not really an American truck anymore - it is what it is when you need to fix it.

• 
  @davidhafer862323 күн бұрын

  So the timing of the engine won’t be affected when that gear gets removed to get access to the water pump bolts then

• 
  @ralfsautomotive23 күн бұрын

  If you are careful then no!

• 
  @davidhafer862322 күн бұрын

  @@ralfsautomotive awesome

• 
  @elies808426 күн бұрын

  How often do you recommend this service?

• 
  @ralfsautomotive26 күн бұрын

  25-35K

• 
  @DadePomsouvan27 күн бұрын

  I have both codes on my 08 FX35, Code P0011 and P0021, but my car runs fine, it is quiet and smooth, and the timing chain was replaced and looks fine, so what could it be? Help!

• 
  @ralfsautomotive26 күн бұрын

  Oil control solenoids. Otherwise have someone hook up a scope and compare to known good. Good Scan tools will provide a clue when the code set.

• 
  @tessamatheson924727 күн бұрын

  Thank you!

• 
  @ralfsautomotive26 күн бұрын

  You welcome

• 
  @AB67Ай бұрын

  can't see the work man

• 
  @rubens13Ай бұрын

  Thanks for the video!!!

• 
  @philliphall5198Ай бұрын

  What is the current price now ???

• 
  @philliphall5198Ай бұрын

  I need one to put decks on from lift table if it will hold up 😊

• 
  @bricemclean5079Ай бұрын

  I wish you angled the camera to see whats unfer there the whole time

• 
  @jeremiahrojas1368Ай бұрын

  Can you use it as a welding table?

• 
  @ralfsautomotiveАй бұрын

  sure but it be one expensive weld Table

• 
  @tiosilvia2370Ай бұрын

  🙏🙏

• 
  @tiosilvia2370Ай бұрын

  Its wire 2 black next drive side was broke🦾en so rasy fix 😃🙏🙏 u dont need to worries bout fuse its wire inside drive door the make it to short that way they should b lit bit longer inside door

• 
  @gabrielrodriguez522Ай бұрын

  Good video, you did not mention what you measured with the caliper i believe was de nut with the end on pinion wasn't it ? . I think for better job was to remove cover inspect and refill with new fresh fluid, thank you.

• 
  @speedlinerc62Ай бұрын

  Great video. Thanks so much for posting this, as there is so much in the way of info and tips in your presentation.

• 
  @justinwatford8615Ай бұрын

  Great video, although I still made the same mistake you did getting an 8 instead of a 10 though in my defense I purchased it before watching this vid and the guys at Autozone cosigning obviously didn't help 🙄

• 
  @ralfsautomotiveАй бұрын

  I'm glad there is purpose in this Video LOL

• 
  @balladeerbuzz3688Ай бұрын

  the idiocy of having 2 very poorly documented but not interchangeable starters for the same car; what screwball did this?

• 
  @jimallen5850Ай бұрын

  Wow brother Good move

• 
  @user-ov8pe8nm5qАй бұрын

  Muchas gracias, señor pude resolver ese problema lo tenia el carro ahora anda suoer bien

• 
  @mattharrod5362Ай бұрын

  @ralfsautomotive where are you located? I have a truck needing this repair.

• 
  @ralfsautomotiveАй бұрын

  Metropolis, IL

• 
  @julianenichols2911Ай бұрын

  put the nuts onto it to attach it to the motor

• 
  @julianenichols2911Ай бұрын

  Did I miss the part where you put the torque converter on

• 
  @NE-ExplorerАй бұрын

  You skipped the hardest part, getting the brake hardware on to the caliper bracket. Trying to figure out how all those clips are oriented, and getting the hardware on the dog ears of the pads is pretty difficult

• 
  @ralfsautomotiveАй бұрын

  That should be the easy part! I state all the time that I am assuming a little mechanical ability. This is not for absolue newbies.

• 
  @NE-ExplorerАй бұрын

  @ralfsautomotive There is different hardware...some pads come with 4 identical springs to go on the 4 pad dog ears, others come with 2 springs and 2 squeelers that go into the 4 dog ears. Is it ok to just use the anti rattle springs and leave the squeelers off and put the pad dog ear right into the abutment clip track without the squealer

• 
  @alexbarrios1231Ай бұрын

  What’s the bolt size?

• 
  @EddieWidnerАй бұрын

  Can you send the file to make these wedges I have a set of cloyes cam phaser for a 5.4 thanks

• 
  @1061shotАй бұрын

  im curious if you would have given the rtv sealant time to dry or set up overnight would it have held?

• 
  @shaunsfrench1942Ай бұрын

  I have an 02 f150 obd reader says po306 #er 6 misfire & did the same thing your doing, but I checked all them unplugged them all and but its 7 that has no change when I unplug it and obd reader says #er 6 I had coils and plugs changed about a year ago or almost a year ago.

• 
  @ralfsautomotiveАй бұрын

  Absolutely possible. OBD Reader sometimes give false reports, actually sometime even the high end stuff can mislead you.

• 
  @shaunsfrench1942Ай бұрын

  @@ralfsautomotive now I cant find my sockets lol to swap out the coil dammit

• 
  @rebecahernandez45752 ай бұрын

  Buenos días, espero este bien, una pregunta para cambiar el foco de mi camioneta cherokee limited 2015, como le hago no puedo, tendrá algún seguro??

• 
  @tophersaldanner2 ай бұрын

  Really helpful! Glad you showed the wiring diagram. My wife’s Chevy Sonic has the same symptoms. Thanks!

• 
  @dannymedford15642 ай бұрын

  Thank you for the information.

• 
  @GerryMatestic-bw2zi2 ай бұрын

  GM is a corrupt bunch of bastards....They had this problem for decades but left it that way so dealers could screw the owner of the junker....

• 
  @MrCneo2 ай бұрын

  This video was about as useful as double stacked donuts for a diabetes patient. You should've listened to the reluctance.

• 
  @ralfsautomotive2 ай бұрын

  About as useful as you?

• 
  @ramiroequipilag13162 ай бұрын

  thanks for the tutorial. i'll try this when my wife come home

• 
  @CastBlastCamp2 ай бұрын

  2010 3.9 v6 chevy impala, driver side vents not blowing cold like the passenger side. Replaced driver side actuator hoping to fix the issue. Still having the same issue. Did 3 different reset/relearn procedures, still same issue... Any ideas? Any help is most appreciated!

• 
  @CastBlastCamp2 ай бұрын

  2010 chevy impala, It doesn't have the clicking noise but the driver side vents are not blowing cold/ responding to temp controls like the passenger side. Replaced driver side actuator hoping to fix the issue. Still having the same issue. Any ideas? Any help is most appreciated!

• 
  @garyparker70642 ай бұрын

  One more question what brand of scanner are you using

• 
  @ralfsautomotive2 ай бұрын

  Just about all OE and 6 aftermarket