Пікірлер

• 
  @code_red77447 сағат бұрын

  You think running that mount is gaining some of the blast chamber space back? Looks like the muzzle device ends where the hub threads start.

• 
  @VbdRetail5 сағат бұрын

  @code_red7744 yeah it adds some volume. It doesn't add length though. I've been swapping over to A2 style mounts just due to the cost, availability, and the added room in blast chambers. Though if you wanted to stick to SF, the SF Style A2 device would have similar results. But a2 seems to be similar size to other options (xeno, rearden etc). But Keymo and larger SF Devices (Pronged , Brake) are going to fill up more Internal Volume. I also am a big fan of the A2 style due to there being a forcing cone (like reverse baffle similar to the Polo design). Which seems to lower back pressure on every suppressor. It creates a negative space and pseudo reflex chamber around the edges. That being said, mount or not, this suppressor significantly Lowers back pressure compared to other designs (we used a 762 proto a few months back on a SF Tested and gave the company feedback).

• 
  @VbdRetail5 сағат бұрын

  @code_red7744 there is gas that comes back on these. But it's a very strange low velocity gas, on a windless day, it doesn't come back to your face. Specifically when we first tested the 762 model, we kept forgetting we were running a 762 suppressor on a 5.56 gun. It sounded great.. but after a mag dump, the Magazine itself has smoke leaking out of the bottom. But none got to our face. It was pretty cool to be honest. I really do think these guys found a perfect balance and refined it more on the dedicated 5.56 suppressor. I'm glad we got these in, and I know this isn't going to be one of those models we end up listing the demo unit for on our site. I'm keeping this, and running it. It really did impress me.

• 
  @OntheToto18 сағат бұрын

  Do you think they will ever release a ocb alternative since it’s no longer in production?

• 
  @VbdRetail15 сағат бұрын

  @@OntheToto I will continue to bombard their emails and reps until they make more.

• 
  @jakem4579Күн бұрын

  That colt build is absolutely delicious. The can sounds good as well.

• 
  @aceup8819Күн бұрын

  After that verbal abuse, I felt sure it would give up!

• 
  @VbdRetailКүн бұрын

  @aceup8819 It didn't even develop a drinking problem.

• 
  @Guero_c72 күн бұрын

  who sells the lv sling and is it qd lol

• 
  @VbdRetailКүн бұрын

  @@Guero_c7 Tang Slangs. It doesn't come with hardware to mount it. So I slapped my own QD loops on it

• 
  @evanacey1414Күн бұрын

  You can also find them on Gas & Threadz

• 
  @nicomuchuelas2 күн бұрын

  Fantastic video and great discussion in the comments concerning tuning of the host weapon. I have a 12.5" criterion core carbine gas with BRT EZtune gas tube, A5H2 buffer, and LMT E-carrier running a CAT WB Ti suppressor and it is also a sewing machine. Yours seems to have slightly lower ROF than mine. Wish we could compare the 2 in person. I also have a 12.5" midlength from triarc also with a BRT EZ-tune, and it is also a sweet shooter. Slightly softer than the criterion. Running a regular sionics NP3 BCG in that one. The only difference.

• 
  @VbdRetail2 күн бұрын

  @@nicomuchuelas the secret is the OBC, 2 quarters, and a Carbine buffer in an A5 tube.

• 
  @tylerfrogley12272 күн бұрын

  I want their 14.6 barrel but they no respond to email

• 
  @VbdRetail2 күн бұрын

  @@tylerfrogley1227 I'll yell at em

• 
  @tylerfrogley12272 күн бұрын

  @@VbdRetail you are a true gentleman

• 
  @zackz40152 күн бұрын

  Thanks for posting, I might have missed it but when will this be released and how much does it weigh?

• 
  @VbdRetail2 күн бұрын

  @@zackz4015 13 oz We have the first ones released on our site right now. Sn's #4-16

• 
  @RJYeates2 күн бұрын

  Well damn. Thats super surprising is china now JuSt aS gOoD? Now im curious how something like a rmrhd would handle that.

• 
  @VbdRetail2 күн бұрын

  @RJYeates idk, If triji wants to send an Rmr HD I'll beat it up in the same fashion. I also don't think at any point I said "JuSt aS gOoD". I said Durable. And I don't think you could argue that this is not a DURABLE optic.

• 
  @RJYeates2 күн бұрын

  @@VbdRetail I don't think you did either I'm just mocking the just as good crowd. It is pretty cool to see dots now being as bombproof as the RMR. I'd be interested in seeing how it holds up in the long term.

• 
  @VbdRetail2 күн бұрын

  @RJYeates gotcha. I'll probably have it live on my buddies glock for a while. And see how it goes.

• 
  @austinplatt80112 күн бұрын

  Who......who is saying Reese

• 
  @VbdRetail2 күн бұрын

  @@austinplatt8011 the cool kids.

• 
  @austinplatt80112 күн бұрын

  @@VbdRetail that tears it im saying Reese now

• 
  @VbdRetail2 күн бұрын

  @@austinplatt8011 welcome to the Cool Club 😎.

• 
  @cameronmills3414Күн бұрын

  Me until now haha I heard wrecky 6 months ago but still in my head see Reese

• 
  @austinplatt8011Күн бұрын

  @@cameronmills3414 you were the cool kid all this time

• 
  @stormtropper882 күн бұрын

  Where can we get them

• 
  @VbdRetail2 күн бұрын

  @@stormtropper88 vbd-retail (dot) com

• 
  @AndrewMRoySr2 күн бұрын

  Saw one of these optics on another channel and you could tell this was a go-to optic for this particular gun tuber had ordered one for my SAR socom only to realize that I needed the RMS - c footprint for this particular pistol damn it

• 
  @juanthelawnmowerthief16412 күн бұрын

  Thanks for the video! Any chance you can run this up against the B&T RBS or a CAT WB? Also is that a .070 gas port?

• 
  @AndrewMRoySr2 күн бұрын

  For systems and foreskin maybe they should start coming up with dick-related suppressor names, definitely cracked me up!

• 
  @williamboggs16822 күн бұрын

  Love this channel

• 
  @alphapoor6342 күн бұрын

  The Irony of this is GLORIOUS! 😂😂😂

• 
  @aftershock683 күн бұрын

  I'll have to get out there and test it out soon

• 
  @The_Informative_Shooter3 күн бұрын

  Very curious to see how it compares to a standard 5.56 Velos. I know Dobies had to change out the buffer system because of the low back pressure when I ran my 10.3" upper on your lower, back in March at the meetup.

• 
  @VbdRetail3 күн бұрын

  @@The_Informative_Shooter at events we tend to throw an H4 / H3 in the Lowers for rentals. Most guns are over gassed to hell. This one is all sorts of tuned. OBC, Carbine in an A5, BRT. I don't run the same setup you'd see at an event.

• 
  @The_Informative_Shooter3 күн бұрын

  @VbdRetail yeah I think it was an h4 if I remember right. It cycled the first few rounds then started shortstroking. Pretty sure we dropped to an H1 or H2 and it was a sewing machine. Still waiting on my 762 velos to get free 😤

• 
  @mealteam6.13 күн бұрын

  This was the video i needed today. ❤

• 
  @kalibrateddrift3 күн бұрын

  Sweet USP!

• 
  @VbdRetail3 күн бұрын

  @@kalibrateddrift thank you! It's a P8A1. So a USP with a slightly heavier slide, the safety is flipped backwards from a normal USP, and it has a Land & Groove barrel instead of polygonal rifling. It's one of those things I'd love to optic cut and get a threaded barrel for a Comp, but with it being a Non standard model, I'm torn on messing with it. (My go to is a Mk25 that I 100% jacked up. Optic cut, all new internals, trigger, hammer, comped it etc.)

• 
  @MassJass3 күн бұрын

  ​@@VbdRetailmake a video on that

• 
  @WsAPsycho3 күн бұрын

  Up and down, left to right, lmfao, you mean elevation and windage?! Get the nomenclature correct, unable to take you seriously son.

• 
  @VbdRetail3 күн бұрын

  @@WsAPsycho nobody cares about fancy vocabulary. Most folks won't even understand it. I spend my days explaining how a suppressor is like a Maze, and folks get it. Or we can say "due to the high pressure fluids causing turbulence, the temperature is transferred to the suppressor, reducing the acoustic waves created by thermal exchange outside of the system". And you'll be at square one again.

• 
  @VbdRetail3 күн бұрын

  @@WsAPsycho but you get an A for Internet Vocab for the Day. Email it to your parents so they can Screen Share it onto the Refrigerator 🫡

• 
  @MooseDefenseAndOutdoors3 күн бұрын

  You sound like someone that would defend steel armor too.

• 
  @VbdRetail3 күн бұрын

  @@MooseDefenseAndOutdoors lol. You're way off on that. But I'm not going to make a fake review on the durability of anything. This optic doesn't break. Sorry man.

• 
  @MooseDefenseAndOutdoors2 күн бұрын

  @@VbdRetail oh shit I thought I was replying to the original comment! I’m totally on your side dude! Lol the other guy definitely defends steel armor

• 
  @griggstyler233 күн бұрын

  Do a review on the top left knife pls

• 
  @thewatchorn3 күн бұрын

  Damn, that thing is shockingly durable.

• 
  @VbdRetail3 күн бұрын

  @@thewatchorn I am not lying when I say, this blew well past my expectations in terms of durability.

• 
  @armorers_wrench3 күн бұрын

  Is it just me or does the ROF of that 10.3 seem kinda low? Especially considering its suppressed. Do you just have some heavy ass buffer and stiff springs in there or is there some other voodoo going on?

• 
  @VbdRetail3 күн бұрын

  It took me a decent bit of tuning to get her there. Ez tune, SureFire OBC, A5 tube with a Carbine buffer with a spacer in the back of the tube (to take advantage of the OBC's ability to travel further back into the buffer tube).

• 
  @VbdRetail3 күн бұрын

  Delayed unlocking, extra stroke, H2 buffer, perfectly gassed. It's wonderful. And just fast enough that you won't outrun it in semi

• 
  @coal_tactical2 күн бұрын

  @@VbdRetail that interesting im really into the lowering rpm stuff, got a bolt weight in my ar22 bolt and contemplating doing the ball detent mod to one of my bolts, and insted of c3 junkies recommended cmmg rdb hydraulic buffer, i use the k spec a5h2 since its cheaper and my 8 inch rdb 9mm shoots really slow, but like the man mentioned, your 10.3 shoots really slow, ive considered getting the lmt e carrier because of the increased dwell time, (longer cam path) which would be the most similar product probably to the obc which is discontinued but have u heard of the mgi, but i think they are called hyrda weapons now, rate reducing buffer? a lil pricy and all vids are old but seems to work a lot

• 
  @mealteam6.13 күн бұрын

  The intro was all i needed to know about that optic. Edit: god damnit, that was kind of impressive, actually. Friendship over 😂

• 
  @Suppress773 күн бұрын

  Awesome video. Quick question, how many mounts come with the B&T suppressor?

• 
  @VbdRetail3 күн бұрын

  @@Suppress77 they come with a SureFire style hub. An A2 hub is available (not often but is an option). They do not come with muzzle devices.

• 
  @jamesdrakcip92769 күн бұрын

  I mean, like you said, it isnt a fair comparison. The BT is longer and larger diameter, so suppression will likely be a little better. That being said, it is heavier, the first round flash is much brighter than the rc3's, and it adds more overall length to your rifle. The rc3 is a better option for those wanting to avoid the obnoxious first round flash and wanting to keep a shorter weapon. The rc3 can be had for $1078 if you know the right people,...

• 
  @mikepringle327512 күн бұрын

  Did you try the RC3 with a 3 prong Surefire flsh hider? That is suppose to eliminate the flash?

• 
  @byrd850518 күн бұрын

  Thanks for this video. I’m actually considering these two suppressors along with the polonium for my Specwar

• 
  @PS-cc4hm20 күн бұрын

  How’s the gray color of the b&t? I love the gray and it seems like after some use it turns tan?

• 
  @VbdRetail19 күн бұрын

  @PS-cc4hm so if you begin to really get the suppressor cooking, it will begin to turn a light fde almost bronze ish color. We need to test it more, but we did heat one up, and poured a little water on it to cool it faster, and it appeared to remove that fde color. I'm not sure if that's an everytime thing or not. But so far it seems like that color can be removed if you would like to. Personally I love the fde ish color they change.

• 
  @phillip691985122 күн бұрын

  The rc3 is the same as the rc2 just with. Vented cap. Surefire pricing is a rip off. Surefire didn’t think they had any competition with their mounting hub so they raise the prices of their Silencers. Now that surefire has competition, they need to lower their prices

• 
  @JenkinsStevenD23 күн бұрын

  I'm glad I found these videos. Bought my B&T 5.56 today. I have about 1500 saved up for an RC3 and now I am not even going to bother with it.

• 
  @zohairnaqvi973413 күн бұрын

  i love my rc3... these guys are not using the recommended muzzle device (4 prong/3 prong flash hider)

• 
  @luckygunnerx302 күн бұрын

  @@zohairnaqvi9734Im Pretty sure SF just says not to use a closed tine

• 
  @triphammer120326 күн бұрын

  Wild that a inconel/longer can weighs less

• 
  @VbdRetail25 күн бұрын

  @@triphammer1203 their whole new lineup is lightweight as hell. The Rotex Compact with the 4.5oz SureFire Hub attached is a total of like 11.5/12oz. It's incredible

• 
  @spencerdahl93128 күн бұрын

  Is there any play when you mount the suppressor to your flash hider? Mine has some rotational play in it but I might not have tightened it enough. Thanks man!

• 
  @VbdRetail28 күн бұрын

  @spencerdahl931 yes, this is common with SureFire mounts. If you look. The bottom of the muzzle device has a raised nub (it's where the "scrotum" looking thing on the muzzle device is) And SF suppressors/Hubs have a notch inside of them. That nub slides into that notch/groove. The rotation is just the difference in those sizes. There is some wiggle room because if there wasn't, carbon would lock that up immediately. Also making it a pain to mount if it isn't perfectly clean. So that slight rotation is normal. Also, just to minimize chance of carbon locking. I'd say at least every 5 range trips or so, just take a brush and clean that notch/groove. And dab some copper anti seize on it. That is the Main culprit for carbon locking on that design.

• 
  @grantham114928 күн бұрын

  Interesting the inconel can weighs less than

• 
  @zachashcraft1126Ай бұрын

  Have you had any experience with the B&T 7.62 SRBS?

• 
  @VbdRetailАй бұрын

  They have yet to send us any. But we have quite the backorder waiting.

• 
  @zachashcraft1126Ай бұрын

  @@VbdRetail Thanks. Trying to decide between that and a SOCOM 7.62 Mini since the mini doesn’t seem to get produced but a batch or two per year

• 
  @VbdRetailАй бұрын

  @@zachashcraft1126 well there's also the Rotex iii, which we had exclusively made in the US

• 
  @zachashcraft1126Ай бұрын

  @@VbdRetail Right. They’re traditionally baffled inconel cans?

• 
  @VbdRetailАй бұрын

  @zachashcraft1126 the rotex 3 is a baffled suppressor. We have been putting it on an MWS and getting zero gas back to our face. But I have seen it run on overgassed guns, and there's a cloud at times. So I can't honestly say it's "reduced back pressure" but I can say, compared to the RC2-762 on the same gun, its a hell of a lot less gassy. To the point folks asked if it was rbs We have more testing to do, but so far. It seems the Nato A2 style mount it was designed around performs better than the SureFire Hub mount. I'd say if you wanted to run a SF mount, to get their A2 style copy. Rather than use a brake.

• 
  @cleverman86Ай бұрын

  Thank you for your time sharing this review. How is the gas/blowback on the SRBS?

• 
  @VbdRetailАй бұрын

  I think it would take a severely screwed up gun to make It gassy. The Srbs series is actually Factory approved by FN to not void the warranty on SCARS. I believe they are the Only suppressor approved by FN for the Scar

• 
  @WalterRitcheyАй бұрын

  @@VbdRetail that's very interesting to hear! I have a SCAR and am looking at a HK MR762 which doesn't have an adjustable gas block. The only suppressor I've heard 100% works is the Huxwrx Flow 762.

• 
  @VbdRetailАй бұрын

  @WalterRitchey well, we specifically brought the rotex 3 to the market in the US for mr762's. But ironically, B&T has OEM'd hk's suppressors and many firearms for a very long time. Their suppressors also don't void warranty for HK. But I have to mention. The scar 16 is approved for only rotex and srbs, and the scar 17/20 the Srbs. As for HK's, fire away. And for glocks, the OLS doesn't void warranty. B&T can actually get things that Glock USA and HK USA cannot. Which is quite wild when you deep dive into the business relationships.

• 
  @MrSamalama256 күн бұрын

  ​@@VbdRetail Hello! I have a SRBS 5.56 (full size, inconel) that I use on an APC 223 12in. I have the gas turned down to the lowest setting that the manual states, but I still get quite a bit of gas to the face. The ammo I have been using is standard 5.56/.223 55gr and 5.56 62gr and the blowback seems to be similar for all ammo. The suppressor is fully tighten to the mount and the mount + can is fully tighten to the gun. Not sure why I've been getting a good bit of gas to the face. The muzzle device I'm using is a B&T rotex/sf flash hider. Should I reach out to B&T?

• 
  @VbdRetail6 күн бұрын

  @@MrSamalama25 how much gas do you feel without the suppressor?

• 
  @makevelicustomsАй бұрын

  Dam the B&T sounded a bit better than the Otter creek 🤔

• 
  @VbdRetailАй бұрын

  I'd need some expensive sound equipment to really know. They're both very close sound wise. Getting more time behind them, the B&T is a tad less gassy. As for sound. The best way I can explain it is, the OCM is a more Drawn out "Psssssh" and the Mk12 is a shorter "Pssh". I know it's odd. It's not scientific. But it's honest work.

• 
  @makevelicustomsАй бұрын

  @@VbdRetail sounds good 👌🏻 how much is the b&t mk12 gonna go for? B&T does no dam marketing on anything lol curious about there 12 gauge can and there ain’t no info on it.

• 
  @VbdRetailАй бұрын

  @makevelicustoms we have like 3 left on our site. Iirc they're around 850

• 
  @user-mj1vb8jr6j27 күн бұрын

  My wife’s boyfriend has an original Allen engineer mk12 suppressor. I’m curious how the BT would sound vs his

• 
  @AndrewMRoySrАй бұрын

  Came across your video and fellas I want to thank you very much for that night time comparison between the two it's the best one that I have seen so far You just want a new subscriber keep up the great work look forward to seeing some of your other stuff coming forward.🎉🎉

• 
  @roscoep4850Ай бұрын

  Yep I have the B&T because surefire is overpriced and they should stick to dealing with flashlight warranties.

• 
  @charlesreeves3426Ай бұрын

  Just picked up my SRBS inconel full size this morning. As soon as the compacts drop Im going to pick one of them up mas well. I think these are the best value going at this time for what you get. The fact that its half price of the RC3 and performs better should be a no brainer for folks. On top of that B&T's mount design is superior as well. I have heard they originally designed the mount and that makes sense because Surefire wouldn't just let them produce their own version of it. Thanks for the video gentlemen.

• 
  @coal_tactical29 күн бұрын

  patent could be expired

• 
  @RocketFace1408Ай бұрын

  Do you know if the 5.56BT will mount to a 762SF muzzle device? I know the SF cans won’t allow it

• 
  @luckygunnerx30Ай бұрын

  They will so you need to be careful and double check

• 
  @RocketFace1408Ай бұрын

  @@luckygunnerx30 that’s perfect, got a ak105 and the m24x1.5 5.45 muzzles are near impossible to find, 7.62 ones are attainable

• 
  @jgraham441Ай бұрын

  As per surefire the RC3 is supposed to be use with the open tine flash hider

• 
  @VbdRetailАй бұрын

  It doesn't change much at all. A closed tine would improve both suppressors equally.

• 
  @byrd850518 күн бұрын

  @@VbdRetail I prefer running a close timed muzzle device but Surefire actually mentioned not getting as much flash reduction from a close tined as you would from an open tined muzzle device. Kinda sucks

• 
  @timgleason2910Ай бұрын

  Just ordered a B&T SRBS 5.56 full size in Inconel. SureFire adapter.. pretty excited. It’s my first one. I was never willing to wait a year for the c@nts tax stamp…hopefully it’s released quickly like most lately

• 
  @VbdRetailАй бұрын

  We have been seeing a TON of 2-14 day turn arounds for individuals. It seems the only ones longer are folks who may want to consider getting a Upin

• 
  @timgleason2910Ай бұрын

  @@VbdRetail sorry what’s a Upin?

• 
  @VbdRetailАй бұрын

  @timgleason2910 a Unique Personal Identification Number. It's for folks who have similar names to others who would be denied a Transfer. So for folks who frequently get delayed on transfers because they are a Jr. Or have a name like Mike Smith. Where there's other people with the same name that Cannot own a firearm/nfa item. A Upin is something you make to seperate yourself from the other names, minimizing chance of delay during the background check. Since when they run "Mike Smith" a felon pops up. But you aren't that Felon.

• 
  @timgleason2910Ай бұрын

  @@VbdRetail thank you for the info

• 
  @dcr846Ай бұрын

  I got mine in 2 days

• 
  @rahealharisshabbirАй бұрын

  Are you guys going to get the CAT suppressors?

• 
  @VbdRetailАй бұрын

  If we get the opportunity. But I'm not in a rush. If we run into one and enjoy it, I'd be more persuaded. Currently my concerning observations with CAT are 1. If you read their warranty. In the design there is an internal "screen" in the blast chamber designed to wear out in something like 500-1500 rounds. Which is not covered under warranty. Now the screen wearing is less a concern than "how is performance after its gone?". If it wears that quickly, I'd guess it plays a significant role in sound reduction. And all tests / reviews so far are on new suppressors. So I'd really like to see of it maintains that same level of performance over time. 2. Their attitude for being such a new company. I've got heavy K.B. vibes, which is fine. But with being so new, and bold claims paired with that attitude. It makes me wonder if they're going to stick around, or just going to dissappear and collect. 3. Not sure if they changed this yet or not. But last I checked. Their warranty only covers the use of their muzzle devices. But made a Hub suppressor. And during release had a very small amount of MD's compared to suppressors. Forcing majority of customers to either wait indefinitely or void the warranty. That just doesn't sit right with me. But, they may be great, the may be around for a while. Time will tell. At some point we will cross paths with one, and I'd love to record our impressions/comparison. Because at the end of the day, what I listed above is pure speculation, and I could be incorrect.

• 
  @rahealharisshabbirАй бұрын

  @@VbdRetail thank you so much for the video. Really eye opening especially the flash performance of the B&T vs the surefire.

• 
  @VbdRetailАй бұрын

  @rahealharisshabbir we've been waiting on this one for a while. I'm excited to see how the compact performs. We would have had one for the Rotex K, but we have a backlog of pre ords on those, so there wasn't one leftover to test ourselves. As more come through we will be getting videos out. You may see something soon on 110 Sass Actuals channel in the upcoming week or 2

• 
  @VbdRetailАй бұрын

  @rahealharisshabbir as for the Rc3. We have had that for a while. And while I've always thought the price was insanely high. I wasn't too dis-satisfied on performance. But I was also comparing it to Hux. It was just a little louder than an Rc2, Flashier, but a very pleasant shooting expierence. After putting these side by side. My thoughts have completely changed. The SRBS really knocked it out of the park.

• 
  @danielhaywood9764Ай бұрын

  Are you running muzzle break or flash hider with the Surfire? That makes a difference

• 
  @VbdRetailАй бұрын

  We've already tested with 3 prong and 4 prong. Not much of a difference. But the brake would also effect the Srbs equally. Surefire also failed to acknowledge that issue until after they released it. You'd think you'd consider all the devices you offer. It just isn't worth what they're asking. Loud, flashy, and priced like it's made of platinum.

• 
  @roberthutchinson2856Ай бұрын

  Wish bt would sell theirs mountless for cheaper

• 
  @VbdRetailАй бұрын

  We offer it when in stock if you message us

• 
  @19840bАй бұрын

  Is the flash on the Rc3 worse than the Rc2?

• 
  @buffalowick8003Ай бұрын

  Yep

• 
  @luckygunnerx30Ай бұрын

  Much worse

• 
  @19840bАй бұрын

  @@luckygunnerx30 since I’ve asked that question I’ve been able to shoot an Rc3 and Rc2 side by side in low light, and under night vision. I disagree. I posted the video on my account.

• 
  @19840bАй бұрын

  I don’t find the RC3 is worse than the Rc2. I didn’t test with a close tine, but with a 4 prong. The Rc3 was equal if not better in performance to the Rc2.

• 
  @luckygunnerx30Ай бұрын

  @@19840bwe have a video as well. It definitely seens worse than the RC2 we tried it on just about all the muzzle devices besides the warcomps. kzread.info/dash/bejne/aWd12amektS_fMY.htmlsi=HZoojd_8Mc4ahZ-W The RC3 would autogate my nightvision alot where an RC2 would not. My RC3 has definitely gotten flashier the more Ive used it as well.

• 
  @RyanFraileyАй бұрын

  good stuff, I didnt realize B&T made a surefire hub mount. thats bad ass... probably gonna need one.

• 
  @VbdRetailАй бұрын

  If you deep dive. You'll find out they invented it... hence why they're allowed to make it.

• 
  @jakemericaАй бұрын

  B&T all day.

• 
  @maze1914Ай бұрын

  Exactly, and I have the fat girl 7.62 RBS

• 
  @VbdRetailАй бұрын

  @maze1914 THATS A HOSS. We had a Compact 762 Rbs for a while. I wish we kept it for a belt fed. Sound was interesting. It sounded like a Gun shot. But with the Volume turned waaaaay down. At first I didn't think I'd like it, then took off my ear pro and realized I was 5ft behind a 308 gun with no hearing discomfort. But I will admit. That series was Heavy. I'd really like to see how many rounds it can handle cyclic before popping though.