Пікірлер

• 
  @PaoloGallo693 сағат бұрын

  I think I follow all the instructions step by step, but at least I don't see the new format listed under the drawing tab; does it work for NX1899?

• 
  @MicSoftyКүн бұрын

  Very powerful functionality, very nice, concise demonstration. Thank you.

• 
  @learnNXКүн бұрын

  Hi Mic, yes, the function has often helped me to optimise complex measured values to a target.

• 
  @miladmoghbel2906Күн бұрын

  You are the best teacher in the world... thank you so much

• 
  @learnNXКүн бұрын

  Thanks Milad, and there is still so much to explain about NX...

• 
  @halidelmalik52682 күн бұрын

  Very nice 😊 ❤

• 
  @gerardnieuwenhuis68605 күн бұрын

  Hello sir I really appreciate the tutorial ❤🙏. I have a question though, where would I save the thumbnail bmp if im working on the teamcenter plm system? Any clue how that would work and would be visible to other colleagues?

• 
  @learnNX2 күн бұрын

  Save the thumbnail in the item.

• 
  @dls1980fly5 күн бұрын

  Another great video, thanks!

• 
  @h_vamsi7 күн бұрын

  what is "arctan" and i can't able to find it in my expression table, how to find it any one explain me...

• 
  @learnNX6 күн бұрын

  Thanks for your hint!!! In fact, arctan was renamed atangent in NX. About the function: "tan(45)" returns 1, and "atangent(1)" returns 45°.

• 
  @h_vamsi6 күн бұрын

  @@learnNX thank you..

• 
  @raygao52197 күн бұрын

  This channel is awesome!!! Will you make some tutorial for NX surface molding?

• 
  @learnNX7 күн бұрын

  After the topic "Modular Design" learnnx.com/modular-design/ is finished, the topic of surface modelling begins.

• 
  @niranjan27267 күн бұрын

  This channel is gold mine for learning siemens NX, thanks a lot!

• 
  @samirarad93628 күн бұрын

  very nice, useful thank you

• 
  @Cherub1m78 күн бұрын

  love your videos , perfect please dont stop

• 
  @learnNX8 күн бұрын

  Thank you, and don't worry, it will continue!

• 
  @maprolprojetos498 күн бұрын

  Astounding!!

• 
  @DB-rc2or8 күн бұрын

  My head hurts, but this is exactly what I have been looking for. You, Sir, are awesome! I'll go through this slowly, 9 or 10 times, and I'm sure I'll get it. 🙂 Thank you so much. Keep up the great work!

• 
  @learnNX8 күн бұрын

  Hi DB, thanks for the praise. Have a look at PF1 to PF3 first to understand everything in small steps. If you still have questions, write a comment and I will help you. There's more to come after this video, so it's still exciting!

• 
  @ai_designdevelopment62528 күн бұрын

  Master piece 🧩

• 
  @katrhiknaidu19899 күн бұрын

  Thank you ❤

• 
  @Flower_vn9 күн бұрын

  In case, I have file assembly include many parts, all them be Steel. How can I check total weigth of them? I only check each of part. It different with NX12. Pls guide me. Thank you

• 
  @learnNX9 күн бұрын

  Select your top assembly in the Assembly Navigator (AN) and click Select Assembly on the shortcut menu. Click in the area highlighted in blue and click Properties on the shortcut menu. Select the Mass tab and check the setting for "Update mass properties on save". Select Yes. Save your top assembly. In AN, click Columns on the shortcut menu and select Mass (kg). (and now I have an idea for a new video)

• 
  @phismp7319 күн бұрын

  Dear God do you guys make this the most horrifically difficult and stroke-inducing way to do CAM. Seriously. Do you just hate us or something?

• 
  @learnNX9 күн бұрын

  Hello, my channel is not from Siemens and I am a trainer for NX and would like to help other NX users.

• 
  @phismp7319 күн бұрын

  Why does the top (toolbar?) look nothing like mine? I have regular paid-for NX. I have no options that has reference sets like yours. Why does every tutorial on this software never look like what i have and why are the options you guys talk about never actually where you say or even available. This is extremely frustrating.

• 
  @learnNX9 күн бұрын

  Please don't despair. I hope this video helps you: kzread.info/dash/bejne/o6R6s7ehZdqyobQ.html. Which NX version are you using?

• 
  @NickTzallas10 күн бұрын

  Thank you for all the informative videos for us NX newbies. I noticed there was no explanation of "Allow Multiple Values" for the attribute settings. Could you point to a source that would give an example use case?

• 
  @miladmoghbel290612 күн бұрын

  Thank you my teacher... I love you

• 
  @cadcaetutorial203913 күн бұрын

  Amazing sir

• 
  @cadcaetutorial203913 күн бұрын

  So great sir

• 
  @alirezasaedi261313 күн бұрын

  "Hello, thank you for your practical lessons. You are supposed to make a video about interference and tolerance. Thank you."

• 
  @learnNX12 күн бұрын

  Good idea, it's now on my list.

• 
  @Relax_soul000114 күн бұрын

  Much better. Your videos are much informative to learn from scratch. Can you upload some playlist for sheetmetal and weldmetals as well. Much appreciated.

• 
  @user-vm9kp8nx4p15 күн бұрын

  Hello, may I ask whether the mode of moving the visual Angle in the demonstration is the shortcut key or something, thank you

• 
  @user-vm9kp8nx4p15 күн бұрын

  Footage from 10 seconds ago

• 
  @learnNX15 күн бұрын

  @@user-vm9kp8nx4p No, I work with a Space-Mouse: 3dconnexion.com/us/

• 
  @user-vm9kp8nx4p15 күн бұрын

  @@learnNX There is no alternative to 3D mouse

• 
  @user-vm9kp8nx4p15 күн бұрын

  @@learnNX This equipment is too expensive for me😂

• 
  @samirarad936215 күн бұрын

  Thank you very much , very nice, very useful.

• 
  @learnNX15 күн бұрын

  Thank you, Samira

• 
  @mohammadmahdihelali361916 күн бұрын

  Like 👍

• 
  @nikossiopis818116 күн бұрын

  Great video. Very usefull.

• 
  @robinpaul141316 күн бұрын

  Can u make vedios on surfacing commands

• 
  @learnNX15 күн бұрын

  Firstly, I would like to finish the tutorial on modular design. Then comes the topic of freeform, I promise.

• 
  @robinpaul141315 күн бұрын

  @@learnNX 🥰

• 
  @robinpaul141316 күн бұрын

  Great time saver.

• 
  @fouadelshafey50216 күн бұрын

  Sir could you please make videos for cam manufacturing

• 
  @Stocjon198516 күн бұрын

  Much better using this voice!

• 
  @SMOENOVA16 күн бұрын

  mega! sounds so good - and the trick is insane! ❤

• 
  @learnNX16 күн бұрын

  Yes, but now I don't like my old videos any more :-(

• 
  @georgeaziz237216 күн бұрын

  Old voice new voice I love your lectures sir thank you so much for making it for us 🙏😊​@@learnNX

• 
  @ManojSharma-gu8re16 күн бұрын

  Dear Sir, Your tutorials are very good, and they are free also. I want to know whether your have made parallel tutorials on Revit MEP? Do you know such parallel website as yours for Revit MEP? if yes, then please send the link. Thank you.

• 
  @learnNX16 күн бұрын

  I only teach Siemens NX

• 
  @ManojSharma-gu8re17 күн бұрын

  Dear Sir, Please give some sketch tutorials on NX 2007. Thank you

• 
  @learnNX16 күн бұрын

  Search on my website learnnx.com/course-modeling/ From B1P-3-1 to B1P-13-2 you will learn the sketcher.

• 
  @ManojSharma-gu8re16 күн бұрын

  @@learnNX Thank you very much, I am using NX 2007.

• 
  @learnNX16 күн бұрын

  ​@@ManojSharma-gu8re Okay, the videos are made with NX2008, that fits.

• 
  @abhishekprajapati287518 күн бұрын

  Best tutorial i have ever seen deeply explanation 🎉🎉

• 
  @willfebery589718 күн бұрын

  Thank you for all the hard work you do producing these tutorials. Has really helped me. One question, how do you manage to have all your sketches hidden without manually hiding them. All my sketches show unless I hide them myself. Thanks

• 
  @learnNX16 күн бұрын

  You start with the Sketch command and then Extrude or Revolve. I start with the Extrude or Revolve command first and start the sketch with "Sketch Section" at the top of the command. This creates an internal sketch. If you right-click on the extrude in the part navigator, you can later make the sketch external. If you have an external sketch, right-click on the Extrude or Revolve command in the Part Navigator and make your sketch internal, but only if you have not created a second extrude with the same sketch.

• 
  @willfebery589714 күн бұрын

  @@learnNX Makes sense thank you. Will you ever do tutorials on shape studio and sheet metal?

• 
  @learnNX14 күн бұрын

  @@willfebery5897 Yes, but first I would like to finalise the topic of "modular design". With this knowledge, you can reduce the number of decisions and therefore the number of work steps. learnnx.com/modular-design/

• 
  @SMOENOVA18 күн бұрын

  I am so curious to see your next video with the new voices… ❤

• 
  @learnNX16 күн бұрын

  Hi Smoe, I've been thinking about this new video all last weekend, now it's Monday morning and it's uploaded. Thanks for the tip. kzread.info/dash/bejne/nHaMqryjgqSugKw.html

• 
  @cadcaetutorial203920 күн бұрын

  Weldon sir

• 
  @cadcaetutorial203920 күн бұрын

  So amazing this perfect sir

• 
  @rahuljha525922 күн бұрын

  Thank you so much

• 
  @nikossiopis818122 күн бұрын

  Great video, very helpfull. For reusable parts that are not part families is there any other way to control the material? Through expression?

• 
  @learnNX22 күн бұрын

  Thank you, but why do you want to control the material via expressions?

• 
  @nikossiopis818122 күн бұрын

  For reusable parts that are not part families you can use only expressions for the parameters of the krx files. I use such reusable parts for a library of raw materials and I am searching a way to change the material of the part. For example a library of square tube parts that you want to clone beacuse you have a unique length. If you have any idea of how can I achieve this it would be great.

• 
  @samirarad936223 күн бұрын

  thank you very much, very good very useful.

• 
  @ThiagoR776723 күн бұрын

  Is it possible to create a parametric assembly family? For example, an assembly S with parts A and B. B has a wave link to A and both parts have interpart expressions to S. I want to create a family of S. Is it possible?

• 
  @learnNX23 күн бұрын

  Hello Thiago, in a few weeks it will appear on my website learnnx.com/modular-design/ I will show how you can create dynamic assemblies and automatically select parts of a part family using interpart expressions.

• 
  @user-wi6hg3zo7z25 күн бұрын

  coluld you make motion and surfacing series .nx is much hard than solidworks.but it deserves learning

• 
  @Stocjon198529 күн бұрын

  Is there the possibility of using feature attributes not part attributes in the drawing? In tables, text and so on?

• 
  @learnNX29 күн бұрын

  Yes, it's possible with a little bridge. You select an object or feature, select properties, create a title and a Value. Then you select the part in the Assembly Navigator, click on properties, create a Title and select the option Expression Formular. Open the pull-down-menu and select Reference, Object Attribute... Then select your Feature or Object. They are now connected.

• 
  @Stocjon198526 күн бұрын

  @@learnNX Many thanks!

• 
  @wg1159Ай бұрын

  At Step 3 you show the creation of folding marks for an A3 size sheet. How can we make this sketch in such a way that is creates the fold marks for all sheet sizes from A3 to A0 in the correct positions?

• 
  @learnNXАй бұрын

  I don't think it's necessary. I have always folded all sizes with these folding marks. I start at the title block and zigzag fold every 190 mm. Then the second last fold follows to the left-hand edge of the sheet with a distance of 210 mm and the last fold in between.

• 
  @thiennguyenquoc4223Ай бұрын

  i really appreciate it

• 
  @user-fc6by4xc4lАй бұрын

  Добрый день. А есть ли какие то курсы по электрической или трубной маршрутизации?

• 
  @learnNX29 күн бұрын

  К сожалению, нет.

• 
  @user-fc6by4xc4l12 күн бұрын

  А не подскажите где можно на эту тему что-то посмотреть?

• 
  @pansinghbishtuttarakhandi9766Ай бұрын

  Very useful, keep creating more videos thanks.