Useless crap got it and the screws will not stay in place the stupid covers fall of all the time and the gap will not close between the lock even after the main zip tie has been cut its a peice of shit and sometimes the screws are so shit they won't come out I had to pry a knife to finally get it to unscrew and even then my opening was too small for any of the extentions but apparently just too big for the regular gate what kinda stupid shit is that
@sulochandhungelАй бұрын
Useless
@margaretposner4508 ай бұрын
The cups are for stairs. Look at stair installation 😊
@Hundo_Mo2 жыл бұрын
“Enjoy your new life”. Quality meme potential
@BULLDOGVII3 жыл бұрын
*I did a lot of research and found this gate to be exactly what I needed. **do7.pl/NSBabyGate** I wanted a walk through gate or a swing gate for the top and bottom of my stairs. I already have 3 different gates at my home, so I knew the exact one I wanted. It was just about reading online and other helpful reviews. I purchased the North States Easy Swing Gate because of the reviews as well as the video. I also had some questions and called North States and they were very helpful. They have a tool online to find the right gate for you. I also selected this gate because I don't have a lot of time to properly measure and install with a toddler running around. I was extremely happy with the easy step by step instructions. They are clear and concise. They give you easy templates to attach to your wall/post, etc. I highly suggest pre-drilling your hole because the screws alone won't cut it. They have easy installation directions with pictures. I'm handy with doing these types of things and this was really very easy. I had the gate up within 15 minutes. The only thing that took up the most time is figuring out what I plan on doing (front swing on right, or left) and the measuring what size gate I needed for my stairs. I attached the gate to 1x2's and zip tied them to my wood banister. I did not want to put holes in my banister because I am not planning on using this gate forever. The gate is strongly made and would highly recommend this product.*
@arielguerrero47343 жыл бұрын
Yea I bought this off someone and they had cut the belt . Does that mean I can’t use this anymore
@amietruett13873 жыл бұрын
No it just helps installation go smoother. You can zip tie it back together if needed.
@londonwellness3 жыл бұрын
Wtf
@MrBobbyw1213 жыл бұрын
This could be the worst made video I have ever seen. They didn't even show the tightening. Baby's will die because of this video.
@austinkatz15514 жыл бұрын
I came here cuz I had unnecessary cups and screws.
@beaubergeron63694 жыл бұрын
Enjoy your new life 😂
@hlin1174 жыл бұрын
Works fine for me, except no explanation about the wall cups
@Frissdas12074 жыл бұрын
You put them over the wall points.. pretty self explanatory, honestly.
@theicemachine15744 жыл бұрын
Wtf is this bullshit
@brentbeatty41714 жыл бұрын
Work fine for me. Make sure to use a level
@melzplace14 жыл бұрын
Doesn’t show anything about the wall cups. The bolts do not tighten like the video shows. The instruction booklet sucks as well. I’m ready to throw the whole thing in the trash.
@rebeccakorth624 жыл бұрын
Uh same! Mine does not self close like that and I can barely manually close it.
@ItzElixsis4 жыл бұрын
You got an instruction booklet? My instructions were printed on the outside of the box.....
@amietruett13873 жыл бұрын
If it doesn’t open or close smoothly then it’s screwed too tight. I had that problem so I looses screws a little and it fixed my issue.
@logangx93192 жыл бұрын
It's been 2 years I'm assuming you guys finally got it to work right?
@blackeye3336Ай бұрын
Yea same with mine they don't tighten at all they just keep spinning and spinning
@sheetstypes25514 жыл бұрын
What's the tip size
@rdot67552 жыл бұрын
Did you find the tip size?
@qemalhoxha32444 жыл бұрын
Price
@kit52384 жыл бұрын
I got a slightly lesser version of this (didnt have a multimeter a couple others) for $10 on amazon
@intsoccersuperstar14 жыл бұрын
No mention whatsoever about what to do with the wall cups...
@beaubergeron63694 жыл бұрын
I cut the belt.
@oliverj26014 жыл бұрын
before finishing installation?
@cameronls4 жыл бұрын
Passion Lee any advice what to do if you cut belt before installation?
@amietruett13873 жыл бұрын
You can zip tie it back together. It just helps installation.
@jalexanderevans4 жыл бұрын
That thumbs up...
@briangoodanes99745 жыл бұрын
Hi! What a great product. Do you know how I would be able to contact the brand? Do they have a email, phone number or name?
@oliverj26015 жыл бұрын
Hi, Why? Any problem?
@Scrimpets14 жыл бұрын
Brian Goodanes Check Amazon under Sellers, Cumbor, I think you can contact seller that way.
Пікірлер
Useless crap got it and the screws will not stay in place the stupid covers fall of all the time and the gap will not close between the lock even after the main zip tie has been cut its a peice of shit and sometimes the screws are so shit they won't come out I had to pry a knife to finally get it to unscrew and even then my opening was too small for any of the extentions but apparently just too big for the regular gate what kinda stupid shit is that
Useless
The cups are for stairs. Look at stair installation 😊
“Enjoy your new life”. Quality meme potential
*I did a lot of research and found this gate to be exactly what I needed. **do7.pl/NSBabyGate** I wanted a walk through gate or a swing gate for the top and bottom of my stairs. I already have 3 different gates at my home, so I knew the exact one I wanted. It was just about reading online and other helpful reviews. I purchased the North States Easy Swing Gate because of the reviews as well as the video. I also had some questions and called North States and they were very helpful. They have a tool online to find the right gate for you. I also selected this gate because I don't have a lot of time to properly measure and install with a toddler running around. I was extremely happy with the easy step by step instructions. They are clear and concise. They give you easy templates to attach to your wall/post, etc. I highly suggest pre-drilling your hole because the screws alone won't cut it. They have easy installation directions with pictures. I'm handy with doing these types of things and this was really very easy. I had the gate up within 15 minutes. The only thing that took up the most time is figuring out what I plan on doing (front swing on right, or left) and the measuring what size gate I needed for my stairs. I attached the gate to 1x2's and zip tied them to my wood banister. I did not want to put holes in my banister because I am not planning on using this gate forever. The gate is strongly made and would highly recommend this product.*
Yea I bought this off someone and they had cut the belt . Does that mean I can’t use this anymore
No it just helps installation go smoother. You can zip tie it back together if needed.
Wtf
This could be the worst made video I have ever seen. They didn't even show the tightening. Baby's will die because of this video.
I came here cuz I had unnecessary cups and screws.
Enjoy your new life 😂
Works fine for me, except no explanation about the wall cups
You put them over the wall points.. pretty self explanatory, honestly.
Wtf is this bullshit
Work fine for me. Make sure to use a level
Doesn’t show anything about the wall cups. The bolts do not tighten like the video shows. The instruction booklet sucks as well. I’m ready to throw the whole thing in the trash.
Uh same! Mine does not self close like that and I can barely manually close it.
You got an instruction booklet? My instructions were printed on the outside of the box.....
If it doesn’t open or close smoothly then it’s screwed too tight. I had that problem so I looses screws a little and it fixed my issue.
It's been 2 years I'm assuming you guys finally got it to work right?
Yea same with mine they don't tighten at all they just keep spinning and spinning
What's the tip size
Did you find the tip size?
Price
I got a slightly lesser version of this (didnt have a multimeter a couple others) for $10 on amazon
No mention whatsoever about what to do with the wall cups...
I cut the belt.
before finishing installation?
Passion Lee any advice what to do if you cut belt before installation?
You can zip tie it back together. It just helps installation.
That thumbs up...
Hi! What a great product. Do you know how I would be able to contact the brand? Do they have a email, phone number or name?
Hi, Why? Any problem?
Brian Goodanes Check Amazon under Sellers, Cumbor, I think you can contact seller that way.