Пікірлер

• 
  @AscendedZombieАй бұрын

  Can you do this on the newer models? 2022 model?

• 
  @joseramirez2965Ай бұрын

  Ty

• 
  @AnT_EyEАй бұрын

  My Ruckus has been sitting for over a year, got a new battery, new spark plug, new air filter. It starts if I spray Starter fluid up the intake port but wont stay idling. Is there another way to clean the carb without taking the bike apart. This process looks way above my skill level.

• 
  @abegarcia54725 ай бұрын

  I just recently got a 2009 vino 125 and it’s used up but to my knowledge it’s stock but it easily hits 60 - 70

• 
  @Natecoxy5 ай бұрын

  You left the restrictor in??!!

• 
  @collyernicholasjohn9 ай бұрын

  Be careful with that first washer - the one that engages with the kick starter clutch- after the first nut on the variator spindle. It’s dished, so it only sits one way. If you don’t pay attention, there’s a 50-50 chance you’ll get it wrong and grind the fins off the variator. (lol sorry if I got the words wrong).

• 
  @collyernicholasjohn9 ай бұрын

  Vino forever! Maybe not the fastest or the best looking scooter, but definitely good mileage 🎉

• 
  @ricky331839 ай бұрын

  Do you need a special crescent wrench for one of the carb screws (air/gas mix) ?

• 
  @rosscarpenter20869 ай бұрын

  I don’t believe so, the only one I have used the specialty set on was a Vespa.

• 
  @andrewleedesign9 ай бұрын

  Awesome video! My Ruckus has been sitting awhile and definitely needs this treatment! Thanks for sharing this process!! ⭐️⭐️⭐️⭐️

• 
  @mannygulliver266810 ай бұрын

  Will these fit Kawasaki Vulcan 650s ?

• 
  @ranger1959ful10 ай бұрын

  Would you happen to know a way to lower my C3 so I can sit more flat fooded at a stop?

• 
  @rosscarpenter208610 ай бұрын

  Buy a shorter or adjustable shock

• 
  @ranger1959ful10 ай бұрын

  @@rosscarpenter2086thanks. That's what I was thinking also.

• 
  @Quotro11 ай бұрын

  do the carpenter thing, leave job for mechanics...

• 
  @mikes-wv3em11 ай бұрын

  its not hard to break the bead and tire lever it off, avoiding the mc shop trip completely and saving $20

• 
  @RonaldTdy Жыл бұрын

  Thanks

• 
  @daikin7777 Жыл бұрын

  Show us Yamaha Aerox destrict?

• 
  @AdoTrakic Жыл бұрын

  Great video thanks 🙏 can’t see fuel petcock on my 2014 boneville SE, but am having the same issue. Do you know if fuel tank is connected differently with my boneville?

• 
  @Nick-of5it Жыл бұрын

  Your bike is fuel injected I believe. You won't have a petcock

• 
  @nordland2235 Жыл бұрын

  Just went thru that.

• 
  @ChrisLee66 Жыл бұрын

  Boltholes! 😂 Thank you, I needed to see this.

• 
  @allans7281 Жыл бұрын

  Do the new Bonnevilles have any oil leak issues

• 
  @samcs06 Жыл бұрын

  From what I have read, yes they all seem to leak around the cam cover. Supposedly the new seals prevent it. I'll be swapping mine out soon since I have an oil leak also.

• 
  @zimou2473 Жыл бұрын

  Bonjour vous avez acheter ou le bec garde boue svp merci

• 
  @johnolney4865 Жыл бұрын

  You noted the importance of using a torque wrench but the one you recommended only goes down to 10ft-lbs, which is about 50% higher torque than the 10Nm spec for those bolts.

• 
  @garywoods765 Жыл бұрын

  Just fitted a set to yamaha tricity 300 more for keeping cold of hands good video

• 
  @anothersomebody8195 Жыл бұрын

  Nice look for the bike

• 
  @92Jaghk Жыл бұрын

  Great video thanks. Looking to get these for my 2012 Versus 650. And self install. Hadn't a clue. Helpful video!

• 
  @user-gz8em8dh3s Жыл бұрын

  السلام عليكم

• 
  @user-gz8em8dh3s Жыл бұрын

  السلام عليكم

• 
  @susie510 Жыл бұрын

  I'm pretty sure you fast forward past things I need to know. What's your hurry? Let viewers fast forward if they want. Slowing down replay doesn't even help. Great info, if I could just see it all.

• 
  @jarvinisaacarauzpulido6543 Жыл бұрын

  Hello, can you make a video of changing the fuse holder, please?

• 
  @HorsepowerHouse2 жыл бұрын

  Always always always use non-ethanol fuel and you will likely not have to do this crap.

• 
  @clivearmitage2 жыл бұрын

  I am British, I currently live in Germany and have also lived in Czech Republic (Czechia) for 6 months and Poland for 2 months, so I'm maybe more informed than the average tourist. The buzzword for the video is "I don't know anything about where we are, but let's go", so it's not an informative tour guide really (some of the mining museum comments were erroneous), but it is a video of very pretty locations.

• 
  @melostmo2 жыл бұрын

  I still have my '03 Ruckus ( 2 of them ) It's a real finnicky Carb. on them .. & fuel system I have some ATVS also & what I did on one was take off the factory problem VAC operated Carb & replaced it with a simple ' old style ' manual Choke carb. .. removed & or blocked ALL that extra new-age control crap .. now it's just gas into the carb .. and go go GO .. never been happier --- I'm thinking if I oughta do that with my Ruckus ,, I'm gonna search for some old style mini- bike carbs ,, and maybe do the thing

• 
  @cynthiasantana96592 жыл бұрын

  hey Ross I see you had Colorado plates. to the guy below how come my engine is leaking from them i have a 2009

• 
  @zulcha25232 жыл бұрын

  hello! I HAVE A 2002 VINO, RECENTLY I BOUGHT IT. SOMETIMES IT LEAKS GASOLINE WHAT DO YOU RECOMMEND TO FIX THE LEAK? THANKS.!!

• 
  @zaidmohammed78082 жыл бұрын

  Hello, can you help me. I own a Yamaha Vino bike. It has a problem that I cannot solve, which is when I brake with the front brake, the tire of the bike bends to the right and rubs against the body of the bike, knowing that the shock absorber is new and working. Please answer or anyone who reads my comment, I am in real trouble. Thank you.

• 
  @vipervenom85012 жыл бұрын

  You removed the wrong washer to derestrict it.

• 
  @The_Elysian_Reckoning2 жыл бұрын

  4 years ago, meow wolf has been here for a while now.

• 
  @adamsowinski99782 жыл бұрын

  Hi, are you sure the red Loctite (271) is good one here? I think it's removable later only by heating parts?

• 
  @xX5THGROUPXx2 жыл бұрын

  True story.

• 
  @DirtMachine72 жыл бұрын

  I can't put back on. it stops on break part. Do I need to hold break or loos the bolt completly?

• 
  @paulhogan23892 жыл бұрын

  Did you reset the ECU.. Thanks.. Paul

• 
  @paulhogan23892 жыл бұрын

  Thanks Ross.. May you live a 1000 years Addy

• 
  @RevBomb6002 жыл бұрын

  Could these still be installed if you have bar end mirrors?

• 
  @Mech.E2 жыл бұрын

  My question too. Can you share with me if you know pls 👌🏼

• 
  @dgall42572 жыл бұрын

  Great instructional! Used it two years ago and just put new tires on again. Thank you!

• 
  @bobcormier50982 жыл бұрын

  Haaaaaaa. Wow just throws the cover face down on cement .......haaaaaaaaaaaa

• 
  @lyndastarwriter85072 жыл бұрын

  Thank you, Ross.

• 
  @moth.monster2 жыл бұрын

  thanks bro, this'll help me put a la cucaracha horn on my scooter

• 
  @daeom12822 жыл бұрын

  Does it work for 125cc too?

• 
  @rosscarpenter20862 жыл бұрын

  No

• 
  @daeom12822 жыл бұрын

  This works for 125cc as well??

• 
  @johnmitchell55392 жыл бұрын

  I have been thinking about putting a center stand on my ZX14r #TORA57MITCH

• 
  @josuevegagarita71653 жыл бұрын

  Hola! Saludos desde Costa Rica! Vi tus videos, y despejaron varias dudas que tenia al respecto de este soporte central. Pero, me creaste otra duda! Que marca y modelo de llantas andas en tu Versys?

• 
  @outoftheboxwoodworks75603 жыл бұрын

  Thanks dudes, because of this video and all the commenters I was able to do this to our ruckus, I just took it for a test drive and all is good. It was so clogged it wouldn't even want to fire let alone idle, the jets were mostly all clogged. My wide is gonna be so happy, it was my first time doing something like this, its a 2018 ruckus with 515 miles total, we mostly run it hard off road on rutted trails, steep terrain in the san bernardino national forest between 3-7k altitude...