Пікірлер

• 
  @Maybe1Someday11 ай бұрын

  Thanks for the video, people are rather secretive about this. Im all for helping the people out. The people that buy the whole cylinders rebuilt arent the same people that want to do it themselves. I dont think this is hurting any business and if you got your own business you're helping yourself.

• 
  @tcdautomotive798111 ай бұрын

  I have came a long way in my video editing..i was just starting out..lol

• 
  @sirjohnahayfalcon Жыл бұрын

  this is why i hate chevy

• 
  @tcdautomotive798111 ай бұрын

  I can dig it

• 
  @dtruong611 Жыл бұрын

  Hi, I got 1998 SL500 and would like buy some seals for all the hydraulic cylinders on the SL500. I am in the process of replacing all 13 cylinders, please send me the link and the price for all. thanks

• 
  @williammacconnell70472 жыл бұрын

  Hello Aaron, Great video, I need seals for my 1996 SL500 top main lift cylinder.

• 
  @tcdautomotive79812 жыл бұрын

  Sorry for the late reply..you still need seal? Email me @ [email protected] or reply here

• 
  @njoeandjen2 жыл бұрын

  change the small thin o ring on side also

• 
  @njoeandjen2 жыл бұрын

  Great job i need the seals as my 1991 main lift cylinder looks like this one thanks my 96 has the metal snap ring

• 
  @klausschreyer70622 жыл бұрын

  Hey Aaron Good job finding Info. Once I saw how Rod end comes off I had a old Serpentine Belt cut belt wrapped belt around shaft put in vice real tight used Phillips screwdriver put threw rod open fitting and unscrewed with out issues it's Right thread folks you know Righty Tighty lefty Loosey Anyway I'm a Master Mechanic Tech and Aaron gets KZread Tech of the Year Award Thanks 👍🍻

• 
  @gm-classics2 жыл бұрын

  Thanks for info

• 
  @terencerucker32442 жыл бұрын

  thumbs up for the excellent commentary! You should have him produce all of your videos.

• 
  @kensendlosky74382 жыл бұрын

  I'm taking the engine out of a 2002 chrysler sebring. This my help me. I've never removed a front wheel drive engine. I paid 700 dollars for the car. I'm going to do all the body work. And try to paint it like a low rider. Just for something to do.. thanks for the video.

• 
  @codybland11363 жыл бұрын

  Contact me

• 
  @allaboutsemis2323 жыл бұрын

  Sorry guys I been out of this account yes I still have seals email is [email protected]

• 
  @rsmcfee3 жыл бұрын

  Great information! Thanks. Invest in a small iPhone tripod. They work great when you need two hands. But a vise will work too, just kinda heavy in the tool box.....

• 
  @tcdautomotive79813 жыл бұрын

  Thanks alot

• 
  @jakeofalltradesmasteroffun3 жыл бұрын

  Great video. Should just label it, scrawny dude operates cherry picker.

• 
  @allaboutsemis2323 жыл бұрын

  Lol yeah I guess

• 
  @Diogocabreira123 жыл бұрын

  I would like to buy to sets how can i reach to you?

• 
  @allaboutsemis2323 жыл бұрын

  Sorry I’m just seeing this

• 
  @dukeacmcao37153 жыл бұрын

  [email protected]

• 
  @brookschutz47804 жыл бұрын

  I need to buy the full rebuild set for this main cylinder have a 92 500sl . You can email me at [email protected] please and thank you

• 
  @cristianaquino44314 жыл бұрын

  👍

• 
  @michaelwylder36104 жыл бұрын

  Thanks for the vid....just got my main out tonight and your explanations helped solve the mystery. Got my seals and I’m going to replace tomorrow. Kinda nervous about getting the old ploy out of the head that unscrews.

• 
  @allaboutsemis2323 жыл бұрын

  Glad I could help !!!

• 
  @tcdautomotive79813 жыл бұрын

  Glad I could you out by clarifying all about semis is me also

• 
  @ramiabir80093 жыл бұрын

  How do you replace this seal? I got the main cylinder out and opened it, but couldn’t understand how to replace that seal. Do you have a video or an explanation for that? Thank you so muck!

• 
  @JamesHoward-wl8cb4 жыл бұрын

  I just wanted to thank you for putting this out there. Im not sure why everyone is holding onto the info so tight. Take care.

• 
  @superstar1500695 жыл бұрын

  Hey thanks for the video! Are you still selling the seals?

• 
  @tcdautomotive79815 жыл бұрын

  Chris Anderson yes I still have them

• 
  @marianocorredor11205 жыл бұрын

  Did you have to change the wiring harness for this motor?

• 
  @tcdautomotive79815 жыл бұрын

  No I didn’t it was a tc motor

• 
  @Trafficjam39225 жыл бұрын

  How different is the setup of the engine compared to a 2011 2.4 Dodge Avenger?

• 
  @tcdautomotive79815 жыл бұрын

  James M sorry for the delay I’m not getting my notifications but the motors are the same for the most part just make sure the side engine mount is the same

• 
  @manuelbonifacioramos8075 жыл бұрын

  Where can I get the seals from, please help!!

• 
  @ricerv69035 жыл бұрын

  manuel ramos I ordered a Set on eBay

• 
  @henrynapolitano58215 жыл бұрын

  Hawk01

• 
  @henrynapolitano58215 жыл бұрын

  @@ricerv6903 I needtelnotoordersealsFor1990mb3oosl

• 
  @henrynapolitano58215 жыл бұрын

  Ebay.com needtopsealstorepair1990mb300sl

• 
  @ricerv69035 жыл бұрын

  Henry Napolitano what???

• 
  @manuelbonifacioramos8075 жыл бұрын

  I would like to buy two sets of seals to rebuild the cylinders in my 91 R129, please help!

• 
  @nathanield.45276 жыл бұрын

  Where did you get the water pump and gasket from?

• 
  @tcdautomotive79816 жыл бұрын

  Nathaniel D. A place called eastern imports .. Orielys has them to i have gotten them there

• 
  @nathanield.45276 жыл бұрын

  tcdautomotive thanks!

• 
  @frankrizzo4426 жыл бұрын

  Do you what thread size or bolt to use to remove those pivot pins?

• 
  @ricerv69036 жыл бұрын

  frankrizzo442 I thought I put it in the video somewhere it's a small grade 8 it's not many small grade 8 bolts in the store I got them from Orielys it says grade 8 on the package somewhere but you can use any that will thread in

• 
  @JH-tk6ge5 жыл бұрын

  8mm x 32mm is what another youtuber said kzread.info/dash/bejne/eKmlxZOih6qdl6Q.html

• 
  @tcdautomotive79815 жыл бұрын

  Yes 8mm is what I used

• 
  @ricerv69036 жыл бұрын

  Hi you have to change the outer timing cover to make it fit in the Camry other than that it's the same

• 
  @mucialmichaud80206 жыл бұрын

  Will the engine from the 03-06 camry fit on it? I see that they do not use engine mount, the one close the belts. I don't know if It's just a braket that needs to be changed

• 
  @colettejohnson9456 жыл бұрын

  Hold still. You are making me sick to my stomach.

• 
  @ricerv69036 жыл бұрын

  Yes you gotta pull the axles

• 
  @lsxs10e906 жыл бұрын

  How did you free the motor from the trans after taking out the torque converter bolts? If it was an auto idk the video didnt say much

• 
  @ricerv69036 жыл бұрын

  Lsx s10 if you take the torque converter bolts Out it should be free once you unbolted the transmission

• 
  @lsxs10e906 жыл бұрын

  Rice Rv it seems as if im hung up on the passenger cv axle shaft.. Did you pull yours?

• 
  @PyroWithaPen7 жыл бұрын

  Thanks for the videos. I'm about to replace a blown motor in my tC so this was very helpful. The videos would have been easier to watch landscape (horizontal) instead of portrait (vertical) but other than that this was very helpful. Thank you.

• 
  @PyroWithaPen7 жыл бұрын

  Your son is so sweet :D

• 
  @tcdautomotive79815 жыл бұрын

  Michael Dalman lol that was my daughter lol

• 
  @soonernv5 жыл бұрын

  Well then your Daughter is so sweet. Cutest thing I've heard in a long time :)

• 
  @soonernv5 жыл бұрын

  Is there apart 1 to the video?

• 
  @PyroWithaPen7 жыл бұрын

  What is that motor you are putting into it?

• 
  @tcdautomotive79815 жыл бұрын

  Michael Dalman it was identical to original from another tc

• 
  @tcdautomotive79818 жыл бұрын

  Thanx bro...

• 
  @malikking28358 жыл бұрын

  Awesome

• 
  @tcdautomotive79818 жыл бұрын

  Make sure you check out the other videos