Пікірлер

• 
  @markb6812 сағат бұрын

  Great to see the Marty & Mikey show and that this RS is finally in good hands and benefitting from the MJP expertise. It’s a shame the main stealers can’t do these jobs properly but at least it’s now fully sorted and will be back to its best again. Great work as usual MJP! 👍🏻

• 
  @benmayne791022 сағат бұрын

  The recall was amended eventually to include adding sealant to the end of head gasket . something typically you never do

• 
  @1stWorldProblemsSolvedКүн бұрын

  kzread.info/dash/bejne/gaOFvKasj5vMmpM.html After my first head gasket change they did a shite job of timing my RS as well. I had them correct the problem after the re-did the gasket again when I found the leaky head, was a night and day difference. Car is out of warranty finally, so I am about to start taking her to the moon and build her out properly!!!

• 
  @munoz_nitrous_rsКүн бұрын

  I had mine recently rebuilt with a 2l block around 9 months ago...and now the God damn timing cover may be leaking. I love this car but the past year has been challenging to say the least

• 
  @mistrydip2kКүн бұрын

  Very interesting video. My RS has had rough idling few times now and then even to the point where it just stalled and cut out. When I had my last service they even mentioned it had oil leak

• 
  @honeybadger9142Күн бұрын

  Once timed do you remove locking kit and rotate anti clockwise 3 revolutions, then refit locking kit to be sure it all fits back in fine, best way with floating pulleys. Also was the block deck checked with flat bar and ffeeler gauges

• 
  @andrewsandercock6960Күн бұрын

  Thank you for showing us your first class work. Long may it continue.🚙👍

• 
  @leeroy25024941Күн бұрын

  Great video Martyn and I do love that nitrous blue 🙂Car looks sweet, and certainly sounds good!

• 
  @Mistio.Күн бұрын

  You guys shall always be awesome ! Fixing my car via telephone and giving me your special oil return design was the best thing I did after 4 attempts with my dealer 👍🏻. Highly recommended for anyone who has an RS! These guys will fix it 100%!

• 
  @roberts773Күн бұрын

  Thank God for Martyn and MJP performance team for sorting these issues out!!❤❤❤

• 
  @69kentyboyКүн бұрын

  Great video! As a fellow mechanic and an RS Focus owner I love watching your stuff.

• 
  @dmcracingКүн бұрын

  Any RS that has been to a Ford main dealer for the head gasket recall has been done incorrectly!!

• 
  @ashb15023 күн бұрын

  those one step colder spark plugs, do you recommend using them on a stage1 Fiesta ST mk8?

• 
  @fordyford5 күн бұрын

  Those brakes are farkin huuuuge!

• 
  @jamesparry579411 күн бұрын

  It was worth the wait, the quality of the kit is beyond anything I could have hoped for and Martyn and Mike have done an absolutely Stirling job with the design and fitting. Cheers blokes, see you again soon 👍🏻

• 
  @markb6811 күн бұрын

  That BBK has taken time to develop for a reason. MJP quality and workmanship takes time and as a result is beyond top class. Immense! Enjoying the Marty & Mike show too! 😂👍🏻

• 
  @stevehewitt941212 күн бұрын

  Call it 'Dadvise'

• 
  @stevehewitt941212 күн бұрын

  Hey, hope you're well boss, what's the total price? (supply & fit)

• 
  @mjperformance816112 күн бұрын

  All well thanks , please give me a call on 07791241417 to discuss your requirements as each individual kit is custom made to your specifications 👍🏻🏁

• 
  @Size10x13 күн бұрын

  IS THE LAST METH PIPE ON THE RADIATOR ⁉️

• 
  @darkstate532416 күн бұрын

  One proud owner I'm sure. Keep the vids coming, I like the banter, makes the channel worth watching. Will be curious to see the Focus ST though as thats my next car I'll be getting at the end of the year. Currently, Just a dream.

• 
  @markb6816 күн бұрын

  Great to see a new video from you, Mikey & the team. The build quality, looks and workmanship of the bbk are all superb, providing truly amazing stopping power and fitted to the usual MJP high standard. A great mk8! Look forward to the next one mate. 👍🏻

• 
  @nicolamanfro170529 күн бұрын

  dude the dots of the MJP logo on the intercooler are in the wrong color AHAHA

• 
  @01635chrisАй бұрын

  Alright ?😂

• 
  @paohueyinxiong7842Ай бұрын

  Have you dynoed this install?

• 
  @Scott-fw7ktАй бұрын

  When the time is right I would like you guys to go over her... I am.nkw the owner however alot of parts have now been changed. Not by myself would love some more info on her if you have any still.

• 
  @saltycanadian6190Ай бұрын

  I never read into the problems other people have, unless it with aftermarket parts blowing up for no reason. I’ll find the limits myself, I trust the syvecs in my Audi to shut it all down when there is even a slight issue. It’s Canadas fastest B9 A4 1/4mile in 10.21s at 147mph.

• 
  @johnrowell942Ай бұрын

  Nice install

• 
  @JellyrobloxАй бұрын

  Yes

• 
  @MightyBWFC2 ай бұрын

  Exhaust wise, Is the cat back sufficient for stage 2 or is an aftermarket down pipe required Cheers

• 
  @philhill79733 ай бұрын

  U rrr

• 
  @daveyboy2933 ай бұрын

  Do you only get those pops and bangs with a re-map?

• 
  @daveyboy2933 ай бұрын

  Wow just stumbled across your channel as I’m looking to get a mk8 ST in a few months and the first thing I wanted to change on it was this. Was abit worried that it would sound to poppy and backfirey but that sounds really nice not to over the top

• 
  @EttoreB933 ай бұрын

  I wonder if the foam filter is overall better than the cotton one, read somewhere foams are for very sandy/dusty environments whereas the cotton ones offer a better flow and it's as good as foam in city/countryside environment

• 
  @motor_head3 ай бұрын

  Revs behaving as you saw is usually down to evap/purge valve

• 
  @suavesmithy3 ай бұрын

  Van looks great but shocking build quality , I’ve had nothing but problems with mine , wish id bought a transporter .

• 
  @joostonline51464 ай бұрын

  thank god for the subtitles

• 
  @Petrolhead_usaКүн бұрын

  Alright….. 😂

• 
  @oscars14144 ай бұрын

  Is there a revo stage one for puma powershift st at all the 170 bhp model

• 
  @mjperformance81614 ай бұрын

  Unfortunately not at the moment.

• 
  @steveguest80284 ай бұрын

  What restrictor you talking about ?

• 
  @Mistio.5 ай бұрын

  You fixed mine via the phone ! Your return tube is on my car for 4 years now :). You are amazing !

• 
  @mjperformance81615 ай бұрын

  That’s great to hear and thanks for the positive comments 👍🏻🏁

• 
  @user-iw1vi9tl7z5 ай бұрын

  Can you do a revo remap on the new puma st powershift 170bhp and what gains are we looking at thanks

• 
  @mjperformance81615 ай бұрын

  Hi , unfortunately not , manual cars only , regards , Martyn 👍🏻🏁

• 
  @shakultra5 ай бұрын

  If you put water meth on the engine that was dirty will it clean off all that buildup?

• 
  @stevewilson53525 ай бұрын

  Looks truly amazing, what is the power increase with the 170bhp engine?

• 
  @Ruggidscotsman6 ай бұрын

  Does is effect the vehicle when carrying water a lowerd van ? Iv a connect and hesitating to buy springs due to mibile detailing and carrying water .tia 🎉❤

• 
  @andygidman58906 ай бұрын

  i wish i had the money to do my motionr up graded

• 
  @chieflemons6 ай бұрын

  Is this louder than the standard Milltek for the MK8 or the same with just the RS look?

• 
  @Ford846 ай бұрын

  This is why I never take my ST180 to Ford…stick to top tier specialists like MJP and you’ll never go wrong. 👍

• 
  @Moore_Jono6 ай бұрын

  Great to see fresh content Martyn & nice to hear that your team is expanding too 👍🏽

• 
  @andrewsandercock69606 ай бұрын

  Great to see you back, some exciting content to look forward to.🚙👍

• 
  @Ireland1036 ай бұрын

  nice to see you guys back

• 
  @jamielearmonth10396 ай бұрын

  good to see you back always enjoy your content.