Shark fkexstyle I cleaned the filter and now it has the heat level button is flashing won’t turn on.. filters clean ?? Any ideas
@trackrash4 күн бұрын
I used to get into so much trouble doing stuff like this when I was a kid
@yayamuoimuoi91929 күн бұрын
do my x marked clip
@yayamuoimuoi91929 күн бұрын
Hi
@albertyu6690Ай бұрын
Same problem, same fix. Disassembled everything and the hair dryer worked again magically…
@timothycort2282 ай бұрын
I just picked one up at the swap meet for 5.00. Put battery in didn't work. Tapped on front and back now works.
@russellinedaal20072 ай бұрын
We same problem with mine , its not money worth it
@jayelmoon5242 ай бұрын
What kind of liquid and stuff are you using? I have to fix one and I was just thinking I needed solder.
@braddavis28342 ай бұрын
No the heating element or head portion rotated too far clockwise, it was past the locking tab
@Gottacacheemalll3 ай бұрын
My Dyson doesn’t turn on at all. No flashing lights. What could it be
@chrismach4543 ай бұрын
Buy a new one and put the old one back in the box
@dotcomconsulting3d2 ай бұрын
Thermal fuse
@the.usual.routine3 ай бұрын
and what you do ? I dont understand
@markrowlesseo4 ай бұрын
This did make me laugh. You literally had no idea what you was doing! All you had to do was clean the bottom filter. that's what the 3 flashing lights mean. it fixes this 99% of the time. its an awful design though having to pop off buttons to get inside. lol
@julesjulianjules3 ай бұрын
mine was also flashing and all I did was clean the bottom filter and voila, back to life! lol
@charlieosullivan96874 ай бұрын
Mine only works when the cable Is at an angle almost like a broken iPhone charger ? Any suggestions?
@mikesrandomvideos2 ай бұрын
probably bad cord
@letsgooo95015 ай бұрын
Where is you disassembly kit from? That’s what I want
@Gottacacheemalll3 ай бұрын
I just bought mine at harbor freight for $7.99.
@chaftalie774722 күн бұрын
It’s the pro toolkit from ifixit
@gigabyte55686 ай бұрын
I still have my Flipbot as well as Dingbot, Crackbot and Dustbot. I suspect they may also not power on any longer. I've just had them sitting on my desk for years. Really fun toys Tomy made!
@AndGoTinker5 ай бұрын
I came across the various Tomy robots fairly recently. I would have loved stuff like this as a kid!
@lizzettesalmeron30126 ай бұрын
Mine keeps failing the test when it’s plugged in. It will flash red for the test and click, and then keep doing that over and over. If I try to turn on the dryer the lights will flash on but then turn off. Do you know what could be the problem?
@AndGoTinker5 ай бұрын
It's hard to say for sure, but the easiest thing to check is the filter at the base of the handle. It's really easy to remove and clean. I know that if that gets clogged it can cause over heating which can cause the issue that you are describing.
@ShawnsTechRescue7 ай бұрын
Nice work!
@aminabou69327 ай бұрын
My dayso dray hair don't work it's new but it have worked for just 10 minut and it stopped suddenly and the two red light stat to flashing can you please give me an advice
@AndGoTinker7 ай бұрын
I believe that the flashing lights usually means that the filter needs to be cleaned. The filter is the part at the base of the handle and should be easy to get to. If that doesn't fix it, I would try to return it and get a different one since it's new and should not be faulty.
@ShawnsTechRescue8 ай бұрын
That's super rad! How well is the Sharpe holding up on the plastic?
@AndGoTinker8 ай бұрын
It's holding up fairly well actually! Better than I expected. It does spend most of its time on a shelf just on display though.
@AndGoTinker8 ай бұрын
After some thought and looking at other videos showing similar issues, I am fairly certain that the problem was simply that the motor had seized up and simply getting in there and manually moving it freed things up!
@jessicasmith44782 ай бұрын
Yeah it will probably cut off again. You need to clean the filter. Same issue was happening with me. Soak it 30 mins with soap and water and brush the filter clean
@ShawnsTechRescue9 ай бұрын
This is the first time I've seen a Flipbot. Tomy made so many cool toys back in the day. Glad to see Flipbot is back to drunkenly tumbling around, nice work!
@AndGoTinker9 ай бұрын
I had heard of Tomy but didn't realize how many cool things they made back then. Toys and games from the 80's are some of my favorite in general. ...Nostalgia.
@AndGoTinker9 ай бұрын
Check out my channel for the full repair video! youtube.com/@AndGoTinker
@ShawnsTechRescue9 ай бұрын
My dad had one of these when I was a kid in the early 90s, and it was my favorite thing to just watch him eat coins. I recently purchased one at a flea market and sadly my Robbie is no longer eating coins as well. Seeing yours do its little happy dance makes me want to finally get around to fixing him!
@AndGoTinker9 ай бұрын
Definitely a fun project! I was a little intimidated at first by all the gears and stuff but it was worth it in the end.
@AndGoTinker9 ай бұрын
Check out the full video!! studio.kzread.infoa6I9I-dm4Fc/edit
@AndGoTinker9 ай бұрын
Check out the fix video!! kzread.info/dash/bejne/eY2EmcSIpcKtgbw.html
@AndGoTinker9 ай бұрын
Check out the fix video!! kzread.info/dash/bejne/fKWmqKl9eK6Yprg.html
@AndGoTinker9 ай бұрын
Check out the fix video here: kzread.info/dash/bejne/ZaZ8mtiGhtuWm9o.html
@AndGoTinker9 ай бұрын
These Tiger Electronics games are hard to play!
@AndGoTinker9 ай бұрын
My first USB port replacement. Happy it was successful!
@AndGoTinker9 ай бұрын
Cool little robot toy. I probably would have had a lot of fun with this as a kid.
@alst481710 ай бұрын
Wow I have one of these! Good times
@AndGoTinker10 ай бұрын
I had one as a kid! No idea what happened to it though
@denzelmartin620110 ай бұрын
Looks better than tiger electronics. 😂
@AndGoTinker10 ай бұрын
I completely agree!
@uqrising829210 ай бұрын
This is awesome sauce
@AndGoTinker10 ай бұрын
Thanks! It was a fun project and I was really excited to see it working again.
Пікірлер
Shark fkexstyle I cleaned the filter and now it has the heat level button is flashing won’t turn on.. filters clean ?? Any ideas
I used to get into so much trouble doing stuff like this when I was a kid
do my x marked clip
Hi
Same problem, same fix. Disassembled everything and the hair dryer worked again magically…
I just picked one up at the swap meet for 5.00. Put battery in didn't work. Tapped on front and back now works.
We same problem with mine , its not money worth it
What kind of liquid and stuff are you using? I have to fix one and I was just thinking I needed solder.
No the heating element or head portion rotated too far clockwise, it was past the locking tab
My Dyson doesn’t turn on at all. No flashing lights. What could it be
Buy a new one and put the old one back in the box
Thermal fuse
and what you do ? I dont understand
This did make me laugh. You literally had no idea what you was doing! All you had to do was clean the bottom filter. that's what the 3 flashing lights mean. it fixes this 99% of the time. its an awful design though having to pop off buttons to get inside. lol
mine was also flashing and all I did was clean the bottom filter and voila, back to life! lol
Mine only works when the cable Is at an angle almost like a broken iPhone charger ? Any suggestions?
probably bad cord
Where is you disassembly kit from? That’s what I want
I just bought mine at harbor freight for $7.99.
It’s the pro toolkit from ifixit
I still have my Flipbot as well as Dingbot, Crackbot and Dustbot. I suspect they may also not power on any longer. I've just had them sitting on my desk for years. Really fun toys Tomy made!
I came across the various Tomy robots fairly recently. I would have loved stuff like this as a kid!
Mine keeps failing the test when it’s plugged in. It will flash red for the test and click, and then keep doing that over and over. If I try to turn on the dryer the lights will flash on but then turn off. Do you know what could be the problem?
It's hard to say for sure, but the easiest thing to check is the filter at the base of the handle. It's really easy to remove and clean. I know that if that gets clogged it can cause over heating which can cause the issue that you are describing.
Nice work!
My dayso dray hair don't work it's new but it have worked for just 10 minut and it stopped suddenly and the two red light stat to flashing can you please give me an advice
I believe that the flashing lights usually means that the filter needs to be cleaned. The filter is the part at the base of the handle and should be easy to get to. If that doesn't fix it, I would try to return it and get a different one since it's new and should not be faulty.
That's super rad! How well is the Sharpe holding up on the plastic?
It's holding up fairly well actually! Better than I expected. It does spend most of its time on a shelf just on display though.
After some thought and looking at other videos showing similar issues, I am fairly certain that the problem was simply that the motor had seized up and simply getting in there and manually moving it freed things up!
Yeah it will probably cut off again. You need to clean the filter. Same issue was happening with me. Soak it 30 mins with soap and water and brush the filter clean
This is the first time I've seen a Flipbot. Tomy made so many cool toys back in the day. Glad to see Flipbot is back to drunkenly tumbling around, nice work!
I had heard of Tomy but didn't realize how many cool things they made back then. Toys and games from the 80's are some of my favorite in general. ...Nostalgia.
Check out my channel for the full repair video! youtube.com/@AndGoTinker
My dad had one of these when I was a kid in the early 90s, and it was my favorite thing to just watch him eat coins. I recently purchased one at a flea market and sadly my Robbie is no longer eating coins as well. Seeing yours do its little happy dance makes me want to finally get around to fixing him!
Definitely a fun project! I was a little intimidated at first by all the gears and stuff but it was worth it in the end.
Check out the full video!! studio.kzread.infoa6I9I-dm4Fc/edit
Check out the fix video!! kzread.info/dash/bejne/eY2EmcSIpcKtgbw.html
Check out the fix video!! kzread.info/dash/bejne/fKWmqKl9eK6Yprg.html
Check out the fix video here: kzread.info/dash/bejne/ZaZ8mtiGhtuWm9o.html
These Tiger Electronics games are hard to play!
My first USB port replacement. Happy it was successful!
Cool little robot toy. I probably would have had a lot of fun with this as a kid.
Wow I have one of these! Good times
I had one as a kid! No idea what happened to it though
Looks better than tiger electronics. 😂
I completely agree!
This is awesome sauce
Thanks! It was a fun project and I was really excited to see it working again.