Пікірлер

• 
  @awfab35172 ай бұрын

  I did this by hand with my vfd and it kind of worked but definitely something else wrong

• 
  @QuagmireLXIX2 ай бұрын

  That was such a well presented and informative vid, I now have a headache! Thank you

• 
  @ivanprovorov66087 ай бұрын

  что то не видно там 20000 мм/мин

• 
  @MohammadEhsanAlArkani8 ай бұрын

  How can I join?

• 
  @mukundmistry16619 ай бұрын

  Dear sir nyc video kindly please let me know how much length we can clamp components according to soft jaws.

• 
  @user-lr1df8gq1m Жыл бұрын

  What is the rpm? 30k?

• 
  @mrfoameruk Жыл бұрын

  Thanks.. Learnt a lot.

• 
  @amitjolly2105 Жыл бұрын

  Which coolant is best to use for our CNC

• 
  @sage6972 Жыл бұрын

  𝚙𝚛𝚘𝚖𝚘𝚜𝚖 🌟

• 
  @jmeleika1 Жыл бұрын

  How do I test my coolant for bacteria? Starting to get nauseous when I run the machine

• 
  @sharvindrenvishnuramesh68822 жыл бұрын

  👍

• 
  @vdkoster2 жыл бұрын

  Wat kind of endmill is that? How many flutes? I'm asking because the feed per tooth would be ridicoulisly high if it is only a 3 flute.

• 
  @cyber2526 Жыл бұрын

  Propably 5, but i’m sure some endmill can survive that chip load, i gave had a 2 flute survive like .4 per tooth

• 
  @pavelgerassimov4252 жыл бұрын

  Without coolant? But why you are using the Minimum Quantity Lubrication System?)) (or Pulsejet system) Which help to you machining the stainless steel :)

• 
  @donalttully41412 жыл бұрын

  e1gq4 vun.fyi

• 
  @mohdhafiqmohdsalleh86382 жыл бұрын

  Masih ada lagi jawatan ini..saya berminat..

• 
  @munhongteo61962 жыл бұрын

  Please contact our linkedin in the video description

• 
  @mohdhafiqmohdsalleh86382 жыл бұрын

  I send my resume to your email ya..tq

• 
  @brianwaayenberg30993 жыл бұрын

  Poor programming crippled that vf-SS Needed more smoothing tolerance to reduce code, p1 posted for motion control speed and hsm turned on. My standard 09 vf is faster than that (But still not as fast as the driver! Yikes)

• 
  @cyber2526 Жыл бұрын

  Propably same setting, it is a comparison after all

• 
  @brianwaayenberg3099 Жыл бұрын

  @@cyber2526 i got a funny feeling there was some crippling baked into the code, my standard vf2 moves smoother than their vf2ss did, tem g187's make a BIG change in the motion when roughing! toss in the HSM option (or not) and its really magnifyed!

• 
  @cyber2526 Жыл бұрын

  @@brianwaayenberg3099 yeah could be, what i’m saying is that if the smoothing in the cam and tolerance and g187 is the same that the dt-1 can process code faster

• 
  @brianwaayenberg3099 Жыл бұрын

  @@cyber2526 ya i would hope the cam output is the same. you can in controler furthr define what p1-p3 rounding is defined as, so thats a way of cheating/optimizing if you will. in the end though, the VF and DT controlers are identical. all haas mills are. ther may be a few parameter changes to suit each machine, but its the same boardset driving the processing/movments. ive played with several of my haas machines internal settings to optimize them over the years

• 
  @cyber2526 Жыл бұрын

  @@brianwaayenberg3099 i assume the servo’s on the dt are able to accelerate more quickly making it have to slow down less in corners

• 
  @ssp88113 жыл бұрын

  Hi, how much this Vacuum Chuck?

• 
  @amitstorm5003 жыл бұрын

  Ti6Al4V milling tips please for less vibrations and specific machining parameters? Can you guide me?

• 
  @harrelsontrumpets2 жыл бұрын

  the answer depends on many factors

• 
  @DeepakJain-lo1zr3 жыл бұрын

  Once video. Which L.M guideways and lead screw is advised for better and long lasting accuracy

• 
  @CNCPRINTBLOGSPOT3 жыл бұрын

  very nice programmed :-)

• 
  @diego.almeida3 жыл бұрын

  what about harmonic drives? are they used in rotary too?

• 
  @bluepopsicle68033 жыл бұрын

  Very informative.

• 
  @ROBO-GROUP3 жыл бұрын

  Glad it was helpful for you! Stay tuned for more ;)

• 
  @darrylv85303 жыл бұрын

  Space grade? its plain old 6061

• 
  @randomrouting3 жыл бұрын

  Nice, Sounds great!

• 
  @ROBO-GROUP3 жыл бұрын

  Thank You for your support! We will continue to make education CNC content to push our industry 4.0 standard above & beyond!

• 
  @khanabdulrehman39133 жыл бұрын

  Good job 👍

• 
  @ROBO-GROUP3 жыл бұрын

  Thank You for your support! We will continue to make education CNC content to push our industry 4.0 standard above & beyond!

• 
  @FilmyAmit19993 жыл бұрын

  Which is programing software

• 
  @ROBO-GROUP3 жыл бұрын

  We used SolidCAM for this. Thanks for the question!

• 
  @GearTiger0073 жыл бұрын

  have 1 more kind of structure also very popular you not mention, it's called roller cam, i think it can good work in some power place too,espicially on "not whole round 360 degree" situation is best, such like work in Cradle tilt axis. for the cycloidal, i think it hardly to make the very big size, but the roller cam can big size. Our vertical rotable diameter 10m, it's use DD motor, have 1500000NM torque, i think it's the best choice for such size rotate table. thanks your video.

• 
  @mrraimundo1303 жыл бұрын

  Is that clip of the cycloidal geartrain starting at 1:02 available as a separate video file? Let alone the 3D files of which this render was made? As an amateur machine builder it is very interesting to see this high level of engineering. Great source for learning

• 
  @ROBO-GROUP3 жыл бұрын

  Unfortunately, we do not have the video, but thanks for the support! We will continue making quality cnc education content! 👍

• 
  @uzkanda3 жыл бұрын

  Those are some crazy roughing speeds. Please elaborate no your tooling, especially RPM used.

• 
  @ROBO-GROUP3 жыл бұрын

  Hi Arnoldas, glad that you asked! It is around 20,000 rpm. :)

• 
  @blake_nivelt_3893 жыл бұрын

  @@ROBO-GROUP incredible! I am no where near as experienced in cnc but managed to find a sweet spot on my last hobby part at speed:722sfm feed:150in/min WOC:0.150in Axial: 1.5in with a 3F coated endmill. Enjoyed you video very much!

• 
  @alihassan19033 жыл бұрын

  rpm?

• 
  @ROBO-GROUP3 жыл бұрын

  Thanks for asking! It is around 20,000 rpm. :)

• 
  @stephans8914 жыл бұрын

  finally some nice Speed and Feeds

• 
  @ROBO-GROUP3 жыл бұрын

  Thank You for your support! We will continue to make education CNC content to push our industry 4.0 standard above & beyond!

• 
  @jackunoo4 жыл бұрын

  Nice Work Keep It Up

• 
  @ROBO-GROUP4 жыл бұрын

  Thank you, we will!

• 
  @jrgenblindheim30814 жыл бұрын

  Is this really dry or is it MQL?

• 
  @ROBO-GROUP4 жыл бұрын

  MQL

• 
  @igorozegovic99774 жыл бұрын

  Interesting video! What is the spindle speed? No heat transferred to the material??

• 
  @ROBO-GROUP3 жыл бұрын

  Thanks for your comment Igor! The spindle speed is around 20,000 rpm. No heat transferred, it is cool to the touch right after machining. You can pick it up with your bare hands immediately. :)

• 
  @GeorgiMirov5 жыл бұрын

  Amazing video! I am waiting now my DT-2 . Did you tested how the DT machine deal with 3D surfacing ?

• 
  @ROBO-GROUP3 жыл бұрын

  Yes our Haas Dt machines can do 3d Surfacing👍