I have that same problem and that's why I did this search, tomorrow I will do that fuse check .. blessings friend
@johncalvo17434 ай бұрын
Thanks for the video. When I turn my key to the "on" position, I get nothing. No bells or whistles like it normally does when it's cycling through. My batteries are showing 12.4 volts, so it's not the batteries. What can it be? This happened from one day to the next. Looking forward to your input.
@javiercabello-wj2rh4 ай бұрын
Thanks for the video I got same problem Javier from Odessa tx
@socorrorivera94208 ай бұрын
Thank you man that helps a lot 👍
@myphan772510 ай бұрын
Thanks you
@leofelix5015 Жыл бұрын
Thank you
@robertrinaldi8748 Жыл бұрын
Help me Slow Dog. My fan wont come on even when the air pressure is on zero. WTF is wrong with the stupid thing?
@naturalandsimplelife2131 Жыл бұрын
Thank u
@kimroyful Жыл бұрын
Mine is stuck too ...only turns on when the engine on
@lamontparker9073 Жыл бұрын
Thx for posting this I just had the same exact problem with my 2003 Freightliner... I was messing with the Instrument cluster fuses. I changed the ING fuse and my gages are working. I'm going to us the contact cleaner and clean it.
@ratrod3598 Жыл бұрын
Thank you
@surfwaycorp1198 Жыл бұрын
Thank you so much
@bobbyswanson8047 Жыл бұрын
Best goddam video I’ve ever seen. I’ve been looking all day where to find that cs fuse box. And no help from anything. Nota. Nothing.
@nigelhaimraj6937 Жыл бұрын
Good information thanks
@asmoov2 жыл бұрын
I drive the same truck day cab though
@josephalberta11452 жыл бұрын
How do you know if the clutch is bad or the solenoid is bad? Should the fan turn when there is no air pressure?
@yonatanoporta1872 жыл бұрын
Hi I been looking for the air pipe to replace the big silicone , what’s the part number ?
@ramman29412 жыл бұрын
Did you need to remove the clutch holding plates in order to spin the front cover (to get at the Allen bolts). I put shop air to mine but it won't disengage the clutch so I can spin front and align holes
@raulayon92242 жыл бұрын
Thank you.
@Montoya19912 жыл бұрын
Great video, thanks
@Montoya19912 жыл бұрын
Well shit, looks like i need a fan clutch, rhanks for the video
@AlbaniansForChrist3 жыл бұрын
I’m having the same exact issue with my gauges on KW T2000 C15 acert. Only volt gauge is working! I’m about to go try this trick see if it does anything! Thank you
@JoseCruz-hm8io3 жыл бұрын
Thanks brother... that was my problem also 🙂👍🏼
@goaltransit11743 жыл бұрын
This test any truck or international only
@NotStephy3 жыл бұрын
Nice
@JRich-kq6dc3 жыл бұрын
I definitely appreciate it 👍🏿
@jamamaplg3 жыл бұрын
My instrument cluster stopped working bon my 2000 century has 9 gauges all of them working except the digital part Any ideas? I checked my fuse is just one fuse is working fine
@saidabdulle73293 жыл бұрын
thanks for your information, my question is do i have to build air when i test clutch?
@gary453273 жыл бұрын
Yes. Sorry took so long. Or the clutch won't shut off. Needs air to shut off. When you start your truck it engages until air builds up.
@MrCoachector3 жыл бұрын
Thanks for taking your time to explain
@firebird69003 жыл бұрын
There is a lot more to these types of fans than what he is telling you. He never mentioned the difference in Normally Open temperature switches and Normally closed ones and how they affect the air solenoid if its plumbed incorrectly and how that could cause the fan do do just what its doing in the video. Truckers, do yourself a favor, take it to a good mechanic. You'll save money and downtime in the long run. Or, watch you tube. You all drive safe.
@xxcloudyxx16953 жыл бұрын
thanks man, my dad wanted me to figure it out and this helped lots, thanks again!
@TheMetalBison3 жыл бұрын
My fan spins on its own when I crank it up. Not fast. Just a slow spin.
@Saltacokote4 жыл бұрын
THANK YOU. !!! 1 NEW FOLLOWER. PLEASE KEEP DOING VIDEOS NO MATTER HOW SMALL JOB IS. GOD BLESS YOU.
@trucker315454 жыл бұрын
Great video, I haven’t had this issue, I will definitely clean the contacts as a preventative maintenance! 👍
@truck25784 жыл бұрын
First thanks for info mine when the engine get hat the fan is not kicking what you think?
@brendancharette99434 жыл бұрын
Are they 2 stroke or 4 stroke?
@mikekia61634 жыл бұрын
Straight to the point Thank you 😊
@coreyadams46464 жыл бұрын
Sweet!
@rodneyjohnson20645 жыл бұрын
This just happened out of no where to mind
@renezepeda9565 жыл бұрын
U do help us driver thanks keep doing these videos. Be BLESS
@InNoTime33775 жыл бұрын
information display stopped working today on my 97 Century class...any ideas?
@tyflesh5 ай бұрын
Had same on my 98, transformers on circuit board burnt up! Did you find out what yours was?
@InNoTime33775 ай бұрын
@@tyflesh Yeap the ecu had fried shortly after ... was some type of wiring problem that shorted it ... had to put a new harness and ecu...fun times lol
@buddycarroll96415 жыл бұрын
I have the same problem. Going to try your method first thing tomorrow morning. THANKS.
@vg86065 жыл бұрын
“This is very helpful and a fast answer, thank you 👍
Пікірлер
HAPPY OLIVIA RODRIGO DAYYY
I appreciate you brother!!
I have that same problem and that's why I did this search, tomorrow I will do that fuse check .. blessings friend
Thanks for the video. When I turn my key to the "on" position, I get nothing. No bells or whistles like it normally does when it's cycling through. My batteries are showing 12.4 volts, so it's not the batteries. What can it be? This happened from one day to the next. Looking forward to your input.
Thanks for the video I got same problem Javier from Odessa tx
Thank you man that helps a lot 👍
Thanks you
Thank you
Help me Slow Dog. My fan wont come on even when the air pressure is on zero. WTF is wrong with the stupid thing?
Thank u
Mine is stuck too ...only turns on when the engine on
Thx for posting this I just had the same exact problem with my 2003 Freightliner... I was messing with the Instrument cluster fuses. I changed the ING fuse and my gages are working. I'm going to us the contact cleaner and clean it.
Thank you
Thank you so much
Best goddam video I’ve ever seen. I’ve been looking all day where to find that cs fuse box. And no help from anything. Nota. Nothing.
Good information thanks
I drive the same truck day cab though
How do you know if the clutch is bad or the solenoid is bad? Should the fan turn when there is no air pressure?
Hi I been looking for the air pipe to replace the big silicone , what’s the part number ?
Did you need to remove the clutch holding plates in order to spin the front cover (to get at the Allen bolts). I put shop air to mine but it won't disengage the clutch so I can spin front and align holes
Thank you.
Great video, thanks
Well shit, looks like i need a fan clutch, rhanks for the video
I’m having the same exact issue with my gauges on KW T2000 C15 acert. Only volt gauge is working! I’m about to go try this trick see if it does anything! Thank you
Thanks brother... that was my problem also 🙂👍🏼
This test any truck or international only
Nice
I definitely appreciate it 👍🏿
My instrument cluster stopped working bon my 2000 century has 9 gauges all of them working except the digital part Any ideas? I checked my fuse is just one fuse is working fine
thanks for your information, my question is do i have to build air when i test clutch?
Yes. Sorry took so long. Or the clutch won't shut off. Needs air to shut off. When you start your truck it engages until air builds up.
Thanks for taking your time to explain
There is a lot more to these types of fans than what he is telling you. He never mentioned the difference in Normally Open temperature switches and Normally closed ones and how they affect the air solenoid if its plumbed incorrectly and how that could cause the fan do do just what its doing in the video. Truckers, do yourself a favor, take it to a good mechanic. You'll save money and downtime in the long run. Or, watch you tube. You all drive safe.
thanks man, my dad wanted me to figure it out and this helped lots, thanks again!
My fan spins on its own when I crank it up. Not fast. Just a slow spin.
THANK YOU. !!! 1 NEW FOLLOWER. PLEASE KEEP DOING VIDEOS NO MATTER HOW SMALL JOB IS. GOD BLESS YOU.
Great video, I haven’t had this issue, I will definitely clean the contacts as a preventative maintenance! 👍
First thanks for info mine when the engine get hat the fan is not kicking what you think?
Are they 2 stroke or 4 stroke?
Straight to the point Thank you 😊
Sweet!
This just happened out of no where to mind
U do help us driver thanks keep doing these videos. Be BLESS
information display stopped working today on my 97 Century class...any ideas?
Had same on my 98, transformers on circuit board burnt up! Did you find out what yours was?
@@tyflesh Yeap the ecu had fried shortly after ... was some type of wiring problem that shorted it ... had to put a new harness and ecu...fun times lol
I have the same problem. Going to try your method first thing tomorrow morning. THANKS.
“This is very helpful and a fast answer, thank you 👍
this video is in accurate
thank you god bless you
You can completely rebuild it for around 250
i would love to see a vid on that!
Good video
Thank you