You are The Man! Thanks for the video and helping me to figure out a Canon MF printer when nobody else could. I did subscribe!!
@printerdoctortv22 күн бұрын
thanks for trusting my friend, I;m glad thatt my video did serve it's purpose
@Guitargreat2 ай бұрын
Thanks man came right out I appreciate this video
@printerdoctortv2 ай бұрын
Thanks a lot bro., kindly hit like if this video helps you.
@sammiegurl42922 ай бұрын
Shout out from delsan....
@printerdoctortv2 ай бұрын
shout ouuuuuuuuuuuuuuuuuut delsan family
@antoniojungco54283 ай бұрын
Sir tanong ko lang meron kaming printer na hp477 pagwide at hp586 ang problema sir ayaw mag lift up ang papel kahit na nag reset na ako pwede ba makahingi ng kunting advice sa inyo kung dapat gawin salamat and GOD BLESS
@printerdoctortv3 ай бұрын
hello you should double check on the mechanical side around the paper feeding area, example you need to chek if the pick0up rubber roller, maybe it is already worn-out, or maybe it is misaligned, or maybe you need to check if the pick-roller is not rotating. you need to check also maybe the cassette paper lefter is not working. it really needs to visual inspection and find the faulty in that area first.
@user-qn9fg7gj1f3 ай бұрын
please explain morethesolution
@printerdoctortv3 ай бұрын
The root cost of the issue is the ink mist suck by the exhaust fan scattered inside the machine, and since the ink mist is scattered inside it also affects all the encoder wheel sensors. So to solve the problem we need to cleaned all the sensors and all encoder wheel senssors. much better also to make a hole in the plastic back cover so that the exhaust can exit direct from the inside of the machine. You make the cut directly where the excahuse outlet is located.
@user-lf1jm6ij8b3 ай бұрын
Hello, what is the part number of that card that you changed and what is the part number for the HP LaserJet Managed MFP E72525 lamp?
@printerdoctortv3 ай бұрын
sorry but I don't have the parts list currently
@guzmanalarcon64973 ай бұрын
Hello doctor printer, could you please list the steps to follow, indicate if you replace that component or only disconnect it temporarily, this action is not seen in the video.
@printerdoctortv3 ай бұрын
you need to removed the defective auto correction registration sensor then replace with the new one.
@lucacavallini5613 ай бұрын
Hi, i am not able to find information about 61.00.03 error (print head error) on widepage 556, can you help me about what to watch?
@amineissad72403 ай бұрын
So we need to change the controller board?
@printerdoctortv3 ай бұрын
base on my experience yes, this is a comon problem
@angelountalan57015 ай бұрын
sir pag ang problema eh document feeder not detected
@printerdoctortv5 ай бұрын
First you should check the document sensor actuation lever for possible misaligned, blower the sensor itself for possible dust, check wiring connection, update firmware, or worst try to isolated the board where the sensor is connected.
@siskawulandari88676 ай бұрын
please tutor eror 15.B0.F0
@printerdoctortv6 ай бұрын
you need to clean all the encoder sensor inside the machine it will help elimate the card
@Audrius9Ro8 ай бұрын
ohhh too much work to replace transfer belt.... just watch how to change it on HP M680m :)
@printerdoctortv8 ай бұрын
You just follow the procedure even it's to much work but it is wort it. :)
@mohamadfadilah78869 ай бұрын
hello . how to solve 63.00.30 error ? i have same printer E72530. thankyou.
@Gamehakars10 ай бұрын
Please how I can make paper calibration sensors in the pagewide 586&556
@millionteshme998411 ай бұрын
Hi Thank you for your video. It is very helpful. I have HP pagewide 556 the printer prints nothing/blank and I cleaned the print haed by tissue with print head cleaning solution from backside /removing ICU/ then some part has been printed black and very fem magenta printed. I used print head level one and two cleaning and i got no change. Can you help me please how I can clean print head manually ? Thank you
@printerdoctortv11 ай бұрын
Sorry to hear that, but once printhead of this machine got clogged it is very hard to fix.
@бздэн11 ай бұрын
Thanks you doctor, your content helpfulness me👍
@printerdoctortv11 ай бұрын
Glad to hear that
@user-fw9wn1rf7o Жыл бұрын
Hi, could you pls. help to clear 63.00.3A error in Hp laserjet managed mfp E82540 , thank you in advanec
@kaiziman7200 Жыл бұрын
idol baka pwedeng video naman ng mga error sa inkjet 477dw..thanks! more power..
@printerdoctortv Жыл бұрын
okay sge ano ba particular error na encounter mo dyan ngayon?
@user-bx9id7sh5s Жыл бұрын
Спасибо друзья!
@printerdoctortv2 ай бұрын
thanks also, please hit like if this vidoe helps
@hailianglin5812 Жыл бұрын
HI! HP72425 code 30.01.56
@donalbertoaviel17 Жыл бұрын
Good morning Sir. Please help po kung paano ma solve yung ghost print/double print sa Cànon MF635Cx.Thanks incadvance
@printerdoctortv Жыл бұрын
double image, there is a big possibility that there is a misalignment of the colors, it could be the cause is in the laser scanner misaligned of mirrors inside. or maybe the main drive assy is problemtic
@donalbertoaviel17 Жыл бұрын
@@printerdoctortv appreciated.Thank you.
@printerdoctortv Жыл бұрын
@@donalbertoaviel17 you may send the print-out sample to my email, [email protected] I will check it.
@emman7070 Жыл бұрын
sir ano po problem kapag scanner failure yung HP photosmart k510? maraming salamat po
@printerdoctortv Жыл бұрын
We are not really familiar with the HP inkjet printer but mostly in a scanner failure problem. you need to check on the flat flex cable of the scanner bulb. you may cut the end of the flex cable so that the contacts will be fix
@alikorany9541 Жыл бұрын
Hi error cod hp 5035 30-01-08
@printerdoctortv Жыл бұрын
The scanner bulb failed to find it's home position, double check on the mechanical parts of the scanner assy it might be stocked up, check also the flat flex cable of the scanner bulb, or cleaned the white strip home position for the scanner under the platen glass.... or try to isolate the issue. it is related to the scanner assembly
@fxscan3516 Жыл бұрын
brohp 77422 error code 30.01.56
@printerdoctortv Жыл бұрын
sorry brother but I haven't tried this error yet.
@arivardhansinghshekhawat8540 Жыл бұрын
Send please contact number
@jokop1684 Жыл бұрын
Hello mr, can you help me with error code 0xc6fd0002. Thx you very much🙏
@printerdoctortv Жыл бұрын
You may try first clean all the encoder sensors
@terryfua6622 Жыл бұрын
good job Sir shout out pod
@printerdoctortv Жыл бұрын
Next video shout out ta ninyu tanan
@LJPajo Жыл бұрын
Thank you pooo mga sirsss
@printerdoctortv Жыл бұрын
Your welcome sir sana naka tulong kami
@MrSuave-ow9sr Жыл бұрын
ISA KANG HENYO NAPAKA HUSAY MO MARAMI KANG NABIGYAN NG IDEYA SALAMAT
@rommelfua975 Жыл бұрын
Thank you , i hope this video helps your needs
@niloyu105 Жыл бұрын
New subscriber watching from Al Khafji Saudi Arabia 👍
@printerdoctortv Жыл бұрын
Awesome! Thank you!
@biboymasagnay9214 Жыл бұрын
Thank you sa info
@printerdoctortv Жыл бұрын
your very much welcome
@cahayaphoto Жыл бұрын
Klau model printer 525 500 gimana ya bos?
@printerdoctortv Жыл бұрын
English please thank you
@rallyteam1018 Жыл бұрын
error 66.а1.11 jam in left door (page wide color mfp 785) Help!
@printerdoctortv Жыл бұрын
You may use my method of fixing.. clean all the encoder sensor it will help removed the error.
@rallyteam1018 Жыл бұрын
@@printerdoctortv Thank you, I will try it!
@rolandbelandres4648 Жыл бұрын
Kabayan M880 30.03.22. Scanner motor board din ba?T.Y.
@printerdoctortv Жыл бұрын
pag ganyan na problema there is a big possibility that you have a problem with the CIS scanner or the CIS scanner flex cable
@faisaljabbarkhan1834 Жыл бұрын
Bro i want your Whatsapp number
@malianurygrafiti561 Жыл бұрын
is that cleaning sensors by alcohol or something like that ? or just swipe it with duster ?
@printerdoctortv Жыл бұрын
Cleaned with alcohol to remove the ink residue stick in the encoder wheel or encoder sensor. but be careful not to use a strong alcohol agent because it might erase the encoder lines.
@mikVR Жыл бұрын
@@printerdoctortv Hello, can you use isoprophyl alcohol?
@printerdoctortv Жыл бұрын
@@mikVR yes you can use, but please be careful not to scratch the black lines in the encoder strip
@paolofrosinini Жыл бұрын
Excuse me if I write to you, but from the video I can not understand what it is that needs to be changed or cleaned to solve the problem?
@printerdoctortv Жыл бұрын
You just need to clean the encoder sensor
@simplybs9311 Жыл бұрын
Hi I am getting a paper jam error on start up as well in a 477 but not an exact error code, I see are pointing at the clear encoder disk, but I dont really understand what you did. Can you elaborate in a comment? I assume that the disk is dirty and needs to clean?
@printerdoctortv Жыл бұрын
Usually for pagewide models you just need to clean almost all of the encoder sensor
@louielim83292 жыл бұрын
May number po kayo?
@rommelfua9752 жыл бұрын
message kana lang sa fb Rommeell Reedd
@BOBITACOSMIN2 жыл бұрын
Superb!😍
@printerdoctortv Жыл бұрын
Thanks 🤗
@dandynet36862 жыл бұрын
Ada bahasa indonesianya pak?
@printerdoctortv2 жыл бұрын
Sorry I did not understand your comment, but for your info, the language is Filipino but I can understand and speak English too. thank you.
@masdito_7 ай бұрын
gak ada pak
@richardmarquez40842 жыл бұрын
Great job po sir. Sana more repair videos pa po sir Rommel
@printerdoctortv2 жыл бұрын
Thank you, I will next video upload this coming saturday sir
@marktanamor88042 жыл бұрын
Good Job Sir Rommel...
@printerdoctortv2 жыл бұрын
Thanks a lot Mark
@aldrino17422 жыл бұрын
Idol pa washout from cabillo family
@martinanasco76282 жыл бұрын
Pa shout out naman diyan sir
@eychengsingcol5212 жыл бұрын
sana may next video pang ganito...para may matutunan ang mga nag search kong paano mag repair ng printer..GOOD JOB SIR
@printerdoctortv2 жыл бұрын
Maraming salamat Eycheng we will try our best to upload more videos regarding to the printers and copiers.
Пікірлер
You are The Man! Thanks for the video and helping me to figure out a Canon MF printer when nobody else could. I did subscribe!!
thanks for trusting my friend, I;m glad thatt my video did serve it's purpose
Thanks man came right out I appreciate this video
Thanks a lot bro., kindly hit like if this video helps you.
Shout out from delsan....
shout ouuuuuuuuuuuuuuuuuut delsan family
Sir tanong ko lang meron kaming printer na hp477 pagwide at hp586 ang problema sir ayaw mag lift up ang papel kahit na nag reset na ako pwede ba makahingi ng kunting advice sa inyo kung dapat gawin salamat and GOD BLESS
hello you should double check on the mechanical side around the paper feeding area, example you need to chek if the pick0up rubber roller, maybe it is already worn-out, or maybe it is misaligned, or maybe you need to check if the pick-roller is not rotating. you need to check also maybe the cassette paper lefter is not working. it really needs to visual inspection and find the faulty in that area first.
please explain morethesolution
The root cost of the issue is the ink mist suck by the exhaust fan scattered inside the machine, and since the ink mist is scattered inside it also affects all the encoder wheel sensors. So to solve the problem we need to cleaned all the sensors and all encoder wheel senssors. much better also to make a hole in the plastic back cover so that the exhaust can exit direct from the inside of the machine. You make the cut directly where the excahuse outlet is located.
Hello, what is the part number of that card that you changed and what is the part number for the HP LaserJet Managed MFP E72525 lamp?
sorry but I don't have the parts list currently
Hello doctor printer, could you please list the steps to follow, indicate if you replace that component or only disconnect it temporarily, this action is not seen in the video.
you need to removed the defective auto correction registration sensor then replace with the new one.
Hi, i am not able to find information about 61.00.03 error (print head error) on widepage 556, can you help me about what to watch?
So we need to change the controller board?
base on my experience yes, this is a comon problem
sir pag ang problema eh document feeder not detected
First you should check the document sensor actuation lever for possible misaligned, blower the sensor itself for possible dust, check wiring connection, update firmware, or worst try to isolated the board where the sensor is connected.
please tutor eror 15.B0.F0
you need to clean all the encoder sensor inside the machine it will help elimate the card
ohhh too much work to replace transfer belt.... just watch how to change it on HP M680m :)
You just follow the procedure even it's to much work but it is wort it. :)
hello . how to solve 63.00.30 error ? i have same printer E72530. thankyou.
Please how I can make paper calibration sensors in the pagewide 586&556
Hi Thank you for your video. It is very helpful. I have HP pagewide 556 the printer prints nothing/blank and I cleaned the print haed by tissue with print head cleaning solution from backside /removing ICU/ then some part has been printed black and very fem magenta printed. I used print head level one and two cleaning and i got no change. Can you help me please how I can clean print head manually ? Thank you
Sorry to hear that, but once printhead of this machine got clogged it is very hard to fix.
Thanks you doctor, your content helpfulness me👍
Glad to hear that
Hi, could you pls. help to clear 63.00.3A error in Hp laserjet managed mfp E82540 , thank you in advanec
idol baka pwedeng video naman ng mga error sa inkjet 477dw..thanks! more power..
okay sge ano ba particular error na encounter mo dyan ngayon?
Спасибо друзья!
thanks also, please hit like if this vidoe helps
HI! HP72425 code 30.01.56
Good morning Sir. Please help po kung paano ma solve yung ghost print/double print sa Cànon MF635Cx.Thanks incadvance
double image, there is a big possibility that there is a misalignment of the colors, it could be the cause is in the laser scanner misaligned of mirrors inside. or maybe the main drive assy is problemtic
@@printerdoctortv appreciated.Thank you.
@@donalbertoaviel17 you may send the print-out sample to my email, [email protected] I will check it.
sir ano po problem kapag scanner failure yung HP photosmart k510? maraming salamat po
We are not really familiar with the HP inkjet printer but mostly in a scanner failure problem. you need to check on the flat flex cable of the scanner bulb. you may cut the end of the flex cable so that the contacts will be fix
Hi error cod hp 5035 30-01-08
The scanner bulb failed to find it's home position, double check on the mechanical parts of the scanner assy it might be stocked up, check also the flat flex cable of the scanner bulb, or cleaned the white strip home position for the scanner under the platen glass.... or try to isolate the issue. it is related to the scanner assembly
brohp 77422 error code 30.01.56
sorry brother but I haven't tried this error yet.
Send please contact number
Hello mr, can you help me with error code 0xc6fd0002. Thx you very much🙏
You may try first clean all the encoder sensors
good job Sir shout out pod
Next video shout out ta ninyu tanan
Thank you pooo mga sirsss
Your welcome sir sana naka tulong kami
ISA KANG HENYO NAPAKA HUSAY MO MARAMI KANG NABIGYAN NG IDEYA SALAMAT
Thank you , i hope this video helps your needs
New subscriber watching from Al Khafji Saudi Arabia 👍
Awesome! Thank you!
Thank you sa info
your very much welcome
Klau model printer 525 500 gimana ya bos?
English please thank you
error 66.а1.11 jam in left door (page wide color mfp 785) Help!
You may use my method of fixing.. clean all the encoder sensor it will help removed the error.
@@printerdoctortv Thank you, I will try it!
Kabayan M880 30.03.22. Scanner motor board din ba?T.Y.
pag ganyan na problema there is a big possibility that you have a problem with the CIS scanner or the CIS scanner flex cable
Bro i want your Whatsapp number
is that cleaning sensors by alcohol or something like that ? or just swipe it with duster ?
Cleaned with alcohol to remove the ink residue stick in the encoder wheel or encoder sensor. but be careful not to use a strong alcohol agent because it might erase the encoder lines.
@@printerdoctortv Hello, can you use isoprophyl alcohol?
@@mikVR yes you can use, but please be careful not to scratch the black lines in the encoder strip
Excuse me if I write to you, but from the video I can not understand what it is that needs to be changed or cleaned to solve the problem?
You just need to clean the encoder sensor
Hi I am getting a paper jam error on start up as well in a 477 but not an exact error code, I see are pointing at the clear encoder disk, but I dont really understand what you did. Can you elaborate in a comment? I assume that the disk is dirty and needs to clean?
Usually for pagewide models you just need to clean almost all of the encoder sensor
May number po kayo?
message kana lang sa fb Rommeell Reedd
Superb!😍
Thanks 🤗
Ada bahasa indonesianya pak?
Sorry I did not understand your comment, but for your info, the language is Filipino but I can understand and speak English too. thank you.
gak ada pak
Great job po sir. Sana more repair videos pa po sir Rommel
Thank you, I will next video upload this coming saturday sir
Good Job Sir Rommel...
Thanks a lot Mark
Idol pa washout from cabillo family
Pa shout out naman diyan sir
sana may next video pang ganito...para may matutunan ang mga nag search kong paano mag repair ng printer..GOOD JOB SIR
Maraming salamat Eycheng we will try our best to upload more videos regarding to the printers and copiers.