Пікірлер

• 
  @Knox101319 күн бұрын

  Amazing - simple fix that will hopefully be the end of so much frustration! Thank you so much for sharing. Like other people have said, I don't understand why Ikea refuse to make a more permanent fix - but then I guess that would involve them admitting there is a problem!

• 
  @amethyst44442 ай бұрын

  Thank you OMG!!!🎉

• 
  @TisaTinkers2 ай бұрын

  Any recommendations for makong it pop up a bit better?

• 
  @SarahLouiseWoodstock2 ай бұрын

  Ours was so hard to screw in that they became stripped just putting them in so now it pops out but we can't fix it

• 
  @Komplexitet2 ай бұрын

  That is really clever! And a great guide on top of that! Thank you!

• 
  @JasonEdokpa3 ай бұрын

  Thank you so much. You're a life saver.

• 
  @Gatazaf4 ай бұрын

  Aha! I will try this!

• 
  @JessHawk4 ай бұрын

  I think it may have worked, thank you for the idea and taking the time to make this video to save all our butts!

• 
  @katykarnage194 ай бұрын

  This is so smart! Such a good solution to both issues! Thank you, thank you, thank you!

• 
  @carinewatson24844 ай бұрын

  Mine isn’t from ikea but I will definitely try

• 
  @ShaferHart4 ай бұрын

  I never had it slip out but then again I don't use it as a bed often. I do however get a lot of play from the armrest like you said and I was doubting whether I had assembled it right but looks like that's just a design issue. I might do the L bracket fix when I do my project to raise the height of this sofa.

• 
  @vgetarix3754 ай бұрын

  Omfg!!! TY so much man. What an easy and simple fix. I did this with a couple washers, screws and brackets I had around the house. You’re a genius man.

• 
  @stride.5 ай бұрын

  Thank you for this!!

• 
  @Live_Loud5 ай бұрын

  How is sofa cum bed going now? Still going strong? How do you rate it's durability?

• 
  @hanafromspace5 ай бұрын

  Thank you!!!

• 
  @verovlogging6 ай бұрын

  Thank you so much for sharing, this problem has always been so annoying, you're a genius

• 
  @HN-tp3dc6 ай бұрын

  I added 4 washers to each screw and then added heavy duty rubberized pads for the couch legs and that worked for me!

• 
  @HN-tp3dc6 ай бұрын

  Thank you for taking the time to share your fixes with the rest of us peons!

• 
  @HN-tp3dc6 ай бұрын

  Thank you for this fix!

• 
  @nahtho26307 ай бұрын

  THANK YOU SO MUCH YOU ARE A HERO!!!!!!

• 
  @bladester727 ай бұрын

  Hi. How loud is it? In dbi. Thanks

• 
  @AdamAdkison7 ай бұрын

  Thank you Rasheem! We were going crazy , our side panel wasn't going on properly. 3 washers on each bolt was enough to line things up properly. Problem solved! Thank you again!

• 
  @MrAlexander1008 ай бұрын

  Can confirm it worked perfectly !! How they havent fixed this design flaw after so many years, is beyond me...

• 
  @AlfredvanKuik8 ай бұрын

  I tried 3 and then 6 washers on each screw but it was still able to slip out quite easily. Mine was apparently so messed up that I had to put the "hook" at an angle by using more washers on one side than the other (6 on the front side, 0 on the back side). That eventually fixed it. I hope it doesn't strain the wood too much, but we'll cross that bridge when we get to it.

• 
  @gulin1320038 ай бұрын

  great solution. same issue here, i hope ikea should pay attention to this common place design flaw.

• 
  @mzdamibee8 ай бұрын

  Thank you!! Your solution was easy to follow!!

• 
  @melaniesegovia41979 ай бұрын

  Thanks you for the great tip 😊

• 
  @brockorama9 ай бұрын

  Thank you for this fix! I predrilled holes and used some 1 inch particle board flat head screws. I only used one bracket and didn't put washers in the hooks and it has been working like a charm so far!

• 
  @yfirhill48019 ай бұрын

  Right on, the L brackets are key to solving this mass production fail by IKEA. They know but since this is their economical line they don’t care to make it sturdy. They run on the same controlled obsolescence design as the rest of the world.

• 
  @brennagera902910 ай бұрын

  Thank you so much I've been going crazy trying to figure out how I can solve this issue and this is a great remedy!

• 
  @WatchYouTube-lc7qt10 ай бұрын

  I think i'll do the bracket part. Thank you for the idea!

• 
  @rushiacampbell938010 ай бұрын

  This looks amazing only thing is I have no idea where to buy could you please send link to screw and washers L’s thank you also the size of washers

• 
  @SuperPeterpan7911 ай бұрын

  Bless u too. Its surprising no one ever report this issue

• 
  @Knox101319 күн бұрын

  People do (i did!) - Ikea sent an "engineer" to check if it was a manufacturing issue, decided it wasn't, so refused to acknowledge an issue so they wouldn't have to give a refund.

• 
  @maxlucas8811 ай бұрын

  I just added 3 thick washers to the hook that kept popping out and its fixed took 2 minutes.. can't believe we've lived with this problem for that long .. thanks

• 
  @giada7271 Жыл бұрын

  Aiutooo,ho questo problema! Come faccio 😢

• 
  @sunnydayz9032 Жыл бұрын

  Thanks I just got the sofa and the first day it was put together. This was a problem! Ikea hast to know, this is a problem and they still haven’t fixed it😮

• 
  @michaelbudden5045 Жыл бұрын

  Just made both modifications to my Friheten yesterday and it's already incredibly more stable than before. Thanks so much for making this video 🙏🏻

• 
  @LorraineG123 Жыл бұрын

  Thankyou. We have same issue. My job for the weekend.

• 
  @lauras294 Жыл бұрын

  I have this exact same problem with the sofa. It's a guest bed for when my mom visits and I worry about her slipping on it. Definitely going to try these fixes. Thanks!!!

• 
  @user-qq8qz3fw7u Жыл бұрын

  Size of washers I used. 1/4". I used three for each nail (so 3 multiplied by 4). I also only used one bracket at the bottom where he had his, but my bracket was smaller (it will be nice for someone to push it in while you screw those into place).

• 
  @kaichan1504 Жыл бұрын

  Thank you!

• 
  @jenmclernon9249 Жыл бұрын

  it comes in handy when boondocking

• 
  @notsomodesty Жыл бұрын

  THANK YOU THIS HAS BEEN DRIVING ME NUTS!!!!

• 
  @necromancer5600 Жыл бұрын

  thank you so much

• 
  @andreabrooks4193 Жыл бұрын

  I bought some rubber grip pads and some washers 😅 well see how this works Grip pads so the couch doesn’t slide and washers to maintain that it stays

• 
  @TramNguyen-yl7gb Жыл бұрын

  thank you soo much!!! this was driving me insane but such a simple and cost efficient tip. totally fixed the issue! thank you :)

• 
  @michellebarclay7574 Жыл бұрын

  Rasheed I have the same bed but a different issue. The metal working of the fold out section is broken. Can you do another video please?

• 
  @ourcore Жыл бұрын

  I added the washers, but it still slips out, so I'm looking to add the L bracket. I've never used a power drill before. Any advice? Since you mentioned it wasn't easy. Thanks, great video

• 
  @richardquinn7824 Жыл бұрын

  Thank you!!

• 
  @nafizimtiaz5680 Жыл бұрын

  Got this sofa only two months ago. Was extremely annoyed if this was only happening with our unit. Will try this out for sure