Great teleprompter, but try finding a decent instructional video on how to assemble.
@JustAlisa9 ай бұрын
2023 still one of the most deep and moving performances I've ever seen
@Marndarrr10 ай бұрын
This is the absolute best video I can find to represent the balloon festival I grew up loving. I lived just down the street and would walk there every year. Thank you so much for preserving such beautiful memories.
@Anth230 Жыл бұрын
1:10 Dad walks past his fallen, possibly dying kids and decides to scold Dave instead. 😂
@Anth230 Жыл бұрын
0:35 Dave was tidying up Tyler before liftoff ...😂
@Ni5ei Жыл бұрын
There is a second lens in the lower part of the lens but you didn't take that out. It's exactly the lens I need to clean. So how do you take that out?
@Roby0593 Жыл бұрын
But just to clean lenses on that model is not mandatory remove also part of the body right ?
@QuicknStraight Жыл бұрын
I have a 44M-7. Is the disassembly pretty much the same?
@foostamp Жыл бұрын
He just looks like the guy that would do exactly that
@carminhu2011 Жыл бұрын
Eu nem lembro mais quantas vezes já assisti esse vídeo! Que artista maravilhosa! Que entrega! Amo!!!!!
@nickbjones Жыл бұрын
is there enough thread to reverse the front element on the 44M-4?
Still one of the most moving pieces I've ever seen to this day. And it's been a long long time since she showcased this dance. 100/10
@Phil23aiston2 жыл бұрын
Hey, thank you for this, super informative! I recently got a copy of the lens, but I think one of the lenses may have traces of fungus at the edges. Is t any additional cleaning solution I should use to deal with this, or will lighter fluid work?
@clickwind9872 жыл бұрын
Thanks for posting this video! It helped me disassemble my lens which has oil on the aperture blades, preventing them from working properly. Next step is to remove all the oil which has migrated from the helicoid and to reassemble the lens. For a KZread video dealing with the aperture mechanism have a look at kzread.info/dash/bejne/a61q2MigYdCbnLQ.html
@wreford072 жыл бұрын
Any advice on disassembling the helicoids? That would be helpful as mine (and lots of others) is gummed up as the grease dries out.
@jakasampuna302 жыл бұрын
Thank you for your tutorial
@wilhelmbranke13712 жыл бұрын
Thank you for the detailed video. Please, which cloth, name and source of purchase (amazon, ebay, etc.) do you use with lighter fluid to clean the glasses? Nice music selection!
@user-uy5kv7vx1e2 жыл бұрын
Do you have a detailed disassembly video for the 44-2?
@user-uy5kv7vx1e2 жыл бұрын
32:40 He Same isopropanol (изопропанол) 😀 but what kind of liquid is in the yellow bottle? Hello from Russia !
@Noahkarfo2 жыл бұрын
Thanks a lot, I need power supply for CANON J15x9.5B4 KRS II can you please help me with a link?
@jamesadams85723 жыл бұрын
Can you let us know where to get the lense ring rubber tool and the lense spanner tool? Great video. Just wished u covered a slipping/backlash focus ring problem that mine has after it was damaged during shipping... Thanks for the great work..
@by-romancing3 жыл бұрын
WD40 is not a penetrating oil and is probably not ideal for this
@austin29263 жыл бұрын
Damnit boy!! Lol
@TheSuphan3 жыл бұрын
Thank You
@lennetornqvist3 жыл бұрын
This was NOT attended to be a music video. The music only disturb your own speech and is utterly annoying on a "how to" video! Furthermore you do not need to show every little move on the video it makes it long and boooooring.
@RachsutheewaiP3 жыл бұрын
Thanks.
@theb00st3r93 жыл бұрын
At 18:00 You have upper glass and the bigger one on the bottom, but I have the same model and when I opened it, it has only the bigger one on the bottom. Is that the problem why my lens won't focus even in 10cm from the front ?
@ALXBMGINC3 жыл бұрын
Absolutely its a problem.
@suchitgangurde35143 жыл бұрын
Hi, very informative video. I have found a very good looking copy on a used Zenit xp-12, but the aperture blades don't move at all whether I rotate the aperture ring or the push the pin at the back. It is wide open at all times. My question is if I should get it and try to open and repair it by myself. It is going to cost me less than 10$ if I did. What would you say?
Hi @David Clapham , I haven't done anything on it yet, if you're asking about the camera viewfinder cleaning. But I plan to someday based on the time I can get. Also I had a roll in it for testing which I have now given to a lab for processing. Its going to take lot of patient work to open it up carefully so as not to disturb anything and even more patience to put it back right it seems. There is a teardown video for opening the top on KZread the link to which is: kzread.info/dash/bejne/lpqsu8GDfMevj5c.html I was planning on referring this one. As for the cleaning I'm not sure yet on how to. But I'm sure any resources for any other camera model will work.
@alethom_3 жыл бұрын
My lens have no holes on the front presentation cover, how to I take it off??
@ALXBMGINC3 жыл бұрын
In this case you have to do it with the rubber tools
@vidasagharlou48953 жыл бұрын
There is something in her dance that makes me to cry still after all these years Where are you ida hope to see more of you❤️✌🏼
Pray for me while I continue to discern for my vocation with the Dominicans friars of East Africa.God bless you all!
@kimberlyweed4 жыл бұрын
9 years after seeing this for the first time and I still come back to watch it.
@Albanez394 жыл бұрын
Big question: Can I swap the entire optical block (14:26) from one Helios 44M-4 lens into the housing (helicoid) of another Helios 44M-4 lens? I have two 44M-4. One of them has a smooth helicoid, but its aperture mechanism and blades are rusted. The other one has a great optical block, but the helicoid is stuck really bad. I'll put both lenses into infinity and mark the positions on both lenses before swapping the optical block. Will I have problems with focusing distance and so on? Hope you respond :) PS: The lenses are different versions of the 44M-4. One has Zenit and filter thread size written on the front (name) ring, the other does not. But they are identical inside...
@Albanez394 жыл бұрын
@@ALXBMGINC I did it! I marked positions, I disassembled both lenses...I suffered a little with those small screws holding the optical block in place, but i succeeded (used WD) in the end. After cleaning and swapping the optical blocks, I realized I wasted time marking their positions. Since the beginning, the optical blocks seemed a bit off, in slightly different positions from each other. At this point the aperture mechanism wasn't working, because the aperture pin was too far (I even bent the slim "hand" of the aperture mechanism. I bent it back in place and continued) In the end, the optical block didn't matter at all. What decided the correct position were the SCREW HOLES of the aperture mechanism. I made a small scratch to mark the maximum distance the slim "hand" could reach, and then I rotated the entire optical block a little, so the scratch I made and the aperture pin aligned together. And voila! Focusing, aperture and everything else worked correctly. I'm a bit worried about those 3 screw holding the optical block; I removed and screwed them back multiple times, and now there's no loctite holding them in place. Anyway, I tried the lens around the house and it was no different from other Helios lenses. I'm not sure if it can focus to infinity, but with my cheap adapter, I doubt any lens can :P Thanks for your fast response. Hope mine is helpful :)
@Albanez394 жыл бұрын
@@ALXBMGINC I'll have to buy the thread lock online because I have never found it in my country (I needed it in the past for my bicycle). I'm a film student, and I really love the swirly bokeh of these lenses. I'm switching to a GH5 soon, and I'm worried the unique effects of this lens won't be much visible on its small sensor... I'll mainly shoot video with these lenses, but I've also taken an interest in photography lately, all because of vintage lenses and their unique "personalities". Anamorfake mods are pretty nice, unfortunately they don't squeeze the image to achieve a wide angle aspect ratio. Maybe I can find one of those Isco projection lenses that can be converted to real anamorphic converters, but they are pretty rare and expensive. I have one small issue though. I removed the small aperture sphere to make it clickless for video. But the aperture ring is too loose now and except for the play it has, I touch it continuously when going for the focus ring. Every time before taking the shot, I have to check the aperture and correct it. It's basically useless for video because I'll change it by accident while racking focus :/
@clydecashDEEP5 жыл бұрын
You sure that wasn't good ol' Jeb Bush ?
@memuller5 жыл бұрын
Thanks for sharing this video!!! Super clear info!!! I managed to repair my Helios 44m-4. :)
Пікірлер
Great teleprompter, but try finding a decent instructional video on how to assemble.
2023 still one of the most deep and moving performances I've ever seen
This is the absolute best video I can find to represent the balloon festival I grew up loving. I lived just down the street and would walk there every year. Thank you so much for preserving such beautiful memories.
1:10 Dad walks past his fallen, possibly dying kids and decides to scold Dave instead. 😂
0:35 Dave was tidying up Tyler before liftoff ...😂
There is a second lens in the lower part of the lens but you didn't take that out. It's exactly the lens I need to clean. So how do you take that out?
But just to clean lenses on that model is not mandatory remove also part of the body right ?
I have a 44M-7. Is the disassembly pretty much the same?
He just looks like the guy that would do exactly that
Eu nem lembro mais quantas vezes já assisti esse vídeo! Que artista maravilhosa! Que entrega! Amo!!!!!
is there enough thread to reverse the front element on the 44M-4?
顔を見ただけで運転手の知能が低いのが解る。 見るからに頭が悪そうなオジサン
バカだなあ バカだなあ、、、、
はじめの一歩の木村と青木の学生時代思い出した
じ～じにこんな大役背負わせたらだめだって。 ほぼ台無しにしてくれたな～
子の運転していた爺さん 有史以来最低最悪な男だね
馬鹿過ぎ(笑)
これは確実に１年で離婚するな。新郎がダサいし、新婦もブス。だがお互いプライドは高い典型的なヤンキー。
素晴らしい！一生の思い出だ
1000mgからきたな同志！
That's the funniest shit I've seen today!!!
Still one of the most moving pieces I've ever seen to this day. And it's been a long long time since she showcased this dance. 100/10
Hey, thank you for this, super informative! I recently got a copy of the lens, but I think one of the lenses may have traces of fungus at the edges. Is t any additional cleaning solution I should use to deal with this, or will lighter fluid work?
Thanks for posting this video! It helped me disassemble my lens which has oil on the aperture blades, preventing them from working properly. Next step is to remove all the oil which has migrated from the helicoid and to reassemble the lens. For a KZread video dealing with the aperture mechanism have a look at kzread.info/dash/bejne/a61q2MigYdCbnLQ.html
Any advice on disassembling the helicoids? That would be helpful as mine (and lots of others) is gummed up as the grease dries out.
Thank you for your tutorial
Thank you for the detailed video. Please, which cloth, name and source of purchase (amazon, ebay, etc.) do you use with lighter fluid to clean the glasses? Nice music selection!
Do you have a detailed disassembly video for the 44-2?
32:40 He Same isopropanol (изопропанол) 😀 but what kind of liquid is in the yellow bottle? Hello from Russia !
Thanks a lot, I need power supply for CANON J15x9.5B4 KRS II can you please help me with a link?
Can you let us know where to get the lense ring rubber tool and the lense spanner tool? Great video. Just wished u covered a slipping/backlash focus ring problem that mine has after it was damaged during shipping... Thanks for the great work..
WD40 is not a penetrating oil and is probably not ideal for this
Damnit boy!! Lol
Thank You
This was NOT attended to be a music video. The music only disturb your own speech and is utterly annoying on a "how to" video! Furthermore you do not need to show every little move on the video it makes it long and boooooring.
Thanks.
At 18:00 You have upper glass and the bigger one on the bottom, but I have the same model and when I opened it, it has only the bigger one on the bottom. Is that the problem why my lens won't focus even in 10cm from the front ?
Absolutely its a problem.
Hi, very informative video. I have found a very good looking copy on a used Zenit xp-12, but the aperture blades don't move at all whether I rotate the aperture ring or the push the pin at the back. It is wide open at all times. My question is if I should get it and try to open and repair it by myself. It is going to cost me less than 10$ if I did. What would you say?
hi can you assist me [email protected]
Hi @David Clapham , I haven't done anything on it yet, if you're asking about the camera viewfinder cleaning. But I plan to someday based on the time I can get. Also I had a roll in it for testing which I have now given to a lab for processing. Its going to take lot of patient work to open it up carefully so as not to disturb anything and even more patience to put it back right it seems. There is a teardown video for opening the top on KZread the link to which is: kzread.info/dash/bejne/lpqsu8GDfMevj5c.html I was planning on referring this one. As for the cleaning I'm not sure yet on how to. But I'm sure any resources for any other camera model will work.
My lens have no holes on the front presentation cover, how to I take it off??
In this case you have to do it with the rubber tools
There is something in her dance that makes me to cry still after all these years Where are you ida hope to see more of you❤️✌🏼
Thank you very much! It's a professional job!
hi can you assist me [email protected]
Thank you Sir! just bought the same exact lens and will soon do the same method
hi can you assist me [email protected]
Thank you I looked for so long and your video had what I needed thank you
hi can you assist me [email protected]
A very informative video. Thank you very much.
Pray for me while I continue to discern for my vocation with the Dominicans friars of East Africa.God bless you all!
9 years after seeing this for the first time and I still come back to watch it.
Big question: Can I swap the entire optical block (14:26) from one Helios 44M-4 lens into the housing (helicoid) of another Helios 44M-4 lens? I have two 44M-4. One of them has a smooth helicoid, but its aperture mechanism and blades are rusted. The other one has a great optical block, but the helicoid is stuck really bad. I'll put both lenses into infinity and mark the positions on both lenses before swapping the optical block. Will I have problems with focusing distance and so on? Hope you respond :) PS: The lenses are different versions of the 44M-4. One has Zenit and filter thread size written on the front (name) ring, the other does not. But they are identical inside...
@@ALXBMGINC I did it! I marked positions, I disassembled both lenses...I suffered a little with those small screws holding the optical block in place, but i succeeded (used WD) in the end. After cleaning and swapping the optical blocks, I realized I wasted time marking their positions. Since the beginning, the optical blocks seemed a bit off, in slightly different positions from each other. At this point the aperture mechanism wasn't working, because the aperture pin was too far (I even bent the slim "hand" of the aperture mechanism. I bent it back in place and continued) In the end, the optical block didn't matter at all. What decided the correct position were the SCREW HOLES of the aperture mechanism. I made a small scratch to mark the maximum distance the slim "hand" could reach, and then I rotated the entire optical block a little, so the scratch I made and the aperture pin aligned together. And voila! Focusing, aperture and everything else worked correctly. I'm a bit worried about those 3 screw holding the optical block; I removed and screwed them back multiple times, and now there's no loctite holding them in place. Anyway, I tried the lens around the house and it was no different from other Helios lenses. I'm not sure if it can focus to infinity, but with my cheap adapter, I doubt any lens can :P Thanks for your fast response. Hope mine is helpful :)
@@ALXBMGINC I'll have to buy the thread lock online because I have never found it in my country (I needed it in the past for my bicycle). I'm a film student, and I really love the swirly bokeh of these lenses. I'm switching to a GH5 soon, and I'm worried the unique effects of this lens won't be much visible on its small sensor... I'll mainly shoot video with these lenses, but I've also taken an interest in photography lately, all because of vintage lenses and their unique "personalities". Anamorfake mods are pretty nice, unfortunately they don't squeeze the image to achieve a wide angle aspect ratio. Maybe I can find one of those Isco projection lenses that can be converted to real anamorphic converters, but they are pretty rare and expensive. I have one small issue though. I removed the small aperture sphere to make it clickless for video. But the aperture ring is too loose now and except for the play it has, I touch it continuously when going for the focus ring. Every time before taking the shot, I have to check the aperture and correct it. It's basically useless for video because I'll change it by accident while racking focus :/
You sure that wasn't good ol' Jeb Bush ?
Thanks for sharing this video!!! Super clear info!!! I managed to repair my Helios 44m-4. :)
hi can you assist me [email protected]
0:30 0:54 its Dave's night
Old soul, tears and big oh. Spectacluar