Пікірлер

• 
  @GSKIM-HighSKYКүн бұрын

  It's a great flight❤

• 
  @athenovae7 күн бұрын

  Less rates and more expo! 😂

• 
  @Reis4four20 күн бұрын

  Loose the music

• 
  @Proghol354625 күн бұрын

  hey i need some help with this plane can you please help me?

• 
  @acropilot569324 күн бұрын

  I would try to help you as much as I could. You could also try to join the Inav Fixed Wing group in Facebook

• 
  @Perun900025 күн бұрын

  Hi man! I've just set up my Dolphin and now have concerns regarding prop, how to avoid this situation? how to correctly chose prop for your motor?

• 
  @acropilot569324 күн бұрын

  First I would check what the motor is recommending. Next thing would be to perform a bench test, pay attention to cut your fingers, force constant throttle around 80% and check OSD how many amps and voltage is drawing. Next try it on the field, do not go to far and check it you manage to flight the wing at high throttles without damaging your lipo lion.

• 
  @torquedude26 күн бұрын

  Great video man. I had this happen to me last week except I totally smoked my motor at high speed and it’s not I nice feeling coming in dead stick. Great job with the landing, superb piloting skills. Keep the videos coming……Rotorflex👍

• 
  @acropilot569326 күн бұрын

  I've been flying for a while and this is the first time I experienced this situation. My main concern was to keep the wing on a good angle of attack and avoid stalling. Turning at that altitude was not the best idea but I handle to put the wing away from the wet land.

• 
  @minidrak2032Ай бұрын

  👌 relax total

• 
  @stealthy6018Ай бұрын

  Nice flights. I also fly near the east coast but down towards Lincolnshire 👍 #dolphinday

• 
  @romanfomin5653Ай бұрын

  Круто летает. Если не сложно сможете скинуть свои pid настройки?

• 
  @acropilot5693Ай бұрын

  I would suggest you to perform Autotune on your wing to get your rates. All dolphins are different in function of your components and mechanical setup

• 
  @romanfomin5653Ай бұрын

  @@acropilot5693 Ну все же было бы круто что бы можно было оттолкнуться от чего то.

• 
  @rosariomaldonado2544Ай бұрын

  ❤❤❤

• 
  @LarsHaakonNordbyАй бұрын

  Acro pilot, you are my new hero !!

• 
  @Archer_82Ай бұрын

  That tall grass sure helps with the heavy ones! Is that a 6x6 folder? I just picked one up off eBay, tried it for two packs on my VAS Wyvern and went back to a 7x5.5 fixed. How did you like the folder?

• 
  @acropilot5693Ай бұрын

  that is a 9x4e blade (no folding). I am currently testing an 8''

• 
  @Archer_82Ай бұрын

  Outstanding work there, also subbed. Thanks for sharing!

• 
  @allysoncheynes1216Ай бұрын

  Great video. What's your setup?

• 
  @acropilot5693Ай бұрын

  MOTOR SUNNYSKY 2212 1400kv PROPELLER GEMFAN 9X5 FOLDABLE WITH MAYATECH ESC 40a BLHELI (ARIA) SERVOS PTK9497 MGD RXTX TBS CROSSFIRE NANO SE VTX CADDX VISTA FC MATEK F405 WING BATTERY 4S LION FRONT CAM GOPRO HERO 7 OPTIONAL RUNCAM THUMB PRO INAV 6.1 AUTOTRIM AUTOTUNE AUTOLAUNCH

• 
  @Ryans-world101Ай бұрын

  I love my mini se it's not 4k but it's my workhorse. Great video..✌️

• 
  @eprohodaАй бұрын

  yo, totall useful - I'll be back. Acro,

• 
  @ramilamrahov8808Ай бұрын

  amazing setup.could you share pid settings please?

• 
  @acropilot5693Ай бұрын

  I have added my PID values on the description. Please pay attention on copying them. As written those are very high Ps that my servos can manage to handle as well as my wing customazation.

• 
  @user-otzlixr2 ай бұрын

  Hmmm, I don’t see any dead birds :)

• 
  @CDXLIV4442 ай бұрын

  That HUD is fucking badass.

• 
  @wumfi2 ай бұрын

  Out of curiosity, why does the compass keep showing north, even when you turned around? Edit: Perhaps it’s not showing the heading of the plane? I just noticed that it changed once you flew overhead? It seems odd behaviour!

• 
  @acropilot56932 ай бұрын

  Around 4.4 Km I lost OSD telemetry (bug) that is why I turned back home.

• 
  @andreasissaiades9412 ай бұрын

  Nice! That is how its should fly on 6S and full throttle

• 
  @toastedmangoflight2 ай бұрын

  Hey nice flight for a plane at 1250g. I started subbing. Looking to see more flights...

• 
  @user-otzlixr2 ай бұрын

  Great plane from atom rc…. But their order management/customer service is terrible. I tried over 2 months to get my order right. They asked for the same pictures 3 times. The pictures were in their emails asking for pictures.(all they had to do is scroll down). They just wanted me to give up. They have one contact for the whole company. I did give up , never got a refund either. Super shady business.

• 
  @nicktwinn67602 ай бұрын

  They're a fantastic plane hey! Like your camera angle but can't see how you mount it beneath without damaging it on landing?? Lovely spot too. Looks like Oz ??

• 
  @acropilot56932 ай бұрын

  I will added on the next video. I use small lateral foams and I try to land on tall grass

• 
  @JLfpv2 ай бұрын

  Awesome flights again. Wondering.... do you have a rudder on your dolphin? Ie yaw control?

• 
  @acropilot56932 ай бұрын

  Thanks. No I don’t.

• 
  @mickeyg.c.16543 ай бұрын

  WoW! Wonderful video.

• 
  @marcidannafpv3 ай бұрын

  😍😍😍👌👌👍

• 
  @ebikefe3 ай бұрын

  For 6S, what's your iNav launch throttle?

• 
  @KillerWhale8063 ай бұрын

  looks like on the osd idle is 20% and launch is 50%

• 
  @acropilot56933 ай бұрын

  Iddle Th = 1200 Launch Th = 1500 Climb Angle = 25

• 
  @paparambo25573 ай бұрын

  Did i change electronics to use 6s?

• 
  @acropilot56933 ай бұрын

  yes, you will need to select an ESC - Motor - Propeller combo for an specific design.

• 
  @rosariomaldonado25443 ай бұрын

  Qué pasó?😢😢😢

• 
  @blackbirdboy13 ай бұрын

  Nice. But maybe more interesting if you'd have been 5ft off the deck or sea for the first couple of Km's on the way out and back. I find that with good LOS, you can easily go 2+ Km while skimming the deck or sea in this case with DJI.

• 
  @acropilot56933 ай бұрын

  Thanks for the tip

• 
  @shauncaruna3873 ай бұрын

  Is it possible to use a go pro hero 11? Or just go pro 5s - 7s?

• 
  @acropilot56933 ай бұрын

  I have the GoPro 7 without need to ballast on the back. Any other heavier might require extra weight on the back to CG

• 
  @beyondfossil3 ай бұрын

  Nice setup and interesting location to fly in. What's the distance to those offshore wind turbines out there? Can this 6s Dolphin make it out there for a few aerial orbit shots of them perhaps? That would make for some awesome footage. You can fly low over the waves to get there too. 😄

• 
  @acropilot56933 ай бұрын

  They are exactly 3Km away and my video setup range is around 4km. Batteries and engine set up can easily go there. I've been several times but have not dare to fly low at that distance surrounded by turbines :)

• 
  @beyondfossil3 ай бұрын

  @@acropilot5693 True. But imagine if you pulled it off? That flight would become FPV legend!

• 
  @BrainDeadEngineering3 ай бұрын

  The flying location I envy ! 🥺 you bastard ! lol

• 
  @sharp68chevyguy3 ай бұрын

  Full throttle is not corrected. You shouldn't ever need full throttle with this model. It also appears that you are stick slamming with no Expo added to your controls. Pusher airplanes like a little tail weight, and a upward motor position to keep the nose up with very little thrust.

• 
  @el-media64343 ай бұрын

  Can you put your build in the description please? Thanks.

• 
  @acropilot56933 ай бұрын

  MOTOR SUNNYSKY 2212 1400kv PROPELLER GEMFAN 9X5 FOLDABLE WITH MAYATECH ESC 40a BLHELI (ARIA) SERVOS PTK9497 MGD RXTX TBS CROSSFIRE NANO SE VTX CADDX VISTA FC MATEK F405 WING BATTERY 4S LION FRONT CAM GOPRO HERO 7 OPTIONAL RUNCAM THUMB PRO INAV 6.1 AUTOTRIM AUTOTUNE MANUAL PID EDITS AUTOLAUNCH MAIN FLYIGN MODE : ACRO

• 
  @el-media64343 ай бұрын

  @@acropilot5693 Thank you so much for the details. Will try this build soon as I can get my parts. Cheers!

• 
  @GrapplelotGU3 ай бұрын

  If it doesn’t glide without power after you toss it, Then it’s no Bueno.

• 
  @acropilot56933 ай бұрын

  Agree, this was my first plane, just managed to learn some basics.

• 
  @GSKIM-HighSKY4 ай бұрын

  It's a great flight😊 The GyroFollow video is also great❤

• 
  @acropilot56934 ай бұрын

  Thx, this is my first trial on Gyroflow... great to learn new tricks

• 
  @FpvDevilbreath4 ай бұрын

  Bellissimo

• 
  @GSKIM-HighSKY4 ай бұрын

  It’s a beautiful scenery😊

• 
  @airj34114 ай бұрын

  Дифра-дно. Игрушки для буржуев и недолюдей зомби

• 
  @ebikefe4 ай бұрын

  Is that launch with Auto Lanuch or manual?

• 
  @acropilot56934 ай бұрын

  Hand launch on acro

• 
  @thirdpartycookie4 ай бұрын

  I do not want to buy a Wing I do not want to buy a Wing I do not want to buy a Wing I f*cking want to buy a Wing

• 
  @gogus3574 ай бұрын

  Awesome 👍

• 
  @JLfpv4 ай бұрын

  Nice! Looking to build one. What's your specs? I was going to use a leftover 2806.5 1300kv on 6s with 7" prop...

• 
  @acropilot56934 ай бұрын

  Seems a good set up. This one is; 2207 FIVE 33 MOTOR 1960 kv GEMFAN 5152 50 amp ESC BLHELI 32

• 
  @CDXLIV4444 ай бұрын

  @@acropilot5693 What are the recommended throw/endpoint settings? I can't find them anywhere. What do you think would be a good expo rate for a beginner?

• 
  @acropilot56934 ай бұрын

  I have around 10mm throws and 30% expo for both. If you are beginner I would recommend you to set them around 7 mm. For the maiden I would recommend you to add 1mm reflex. CG on this wing is spot on on the marks but you can always forward them about 1-2mm from the centre marks to be a bit nose heavy. This is not a beginner wing because it has a long nose easy to break but if you want to go ahead try to make it as light as possible (4s small lion pack) and reinforce behind the nose and use the flat nose.

• 
  @JLfpv4 ай бұрын

  @@acropilot5693 I fly fpv quads very well already and have tried sim for wings. Seems waaaaaaaaaayyyyyy easier than quads.

• 
  @acropilot56934 ай бұрын

  Yes they are once you learn how to avoid stalls and well trim a wing. Try to practice on a sim with varying wind conditions. Happy flights.

• 
  @davidwatkin14844 ай бұрын

  The good old Dolphin, steady as a rock. Great video thanks. Any reason for the Cadx instead of the 03 air unit? I'm on my 3rd Dolphin and 1st Penguin. Happy flying.....naturally 😊

• 
  @acropilot56934 ай бұрын

  Maybe the only thing that restrain me to buy the 03 air unit is the Inav OSD elements display.

• 
  @ebikefe4 ай бұрын

  Wow.....quite interesting 😊😊. Thanks for sharing.

• 
  @acropilot56934 ай бұрын

  Glad you enjoyed it

• 
  @Kogacarlo4 ай бұрын

  Amazing that both surroundings and the aeroplane are in focus. Nice flight!

• 
  @HeraklionFPV4 ай бұрын

  Thanx for sharing! Same weather conditions? Also stabilisation in the GoPro disabled I guess? Dolphin seems way more stable! What's your thoughts?

• 
  @acropilot56934 ай бұрын

  I think I add on the description but I will give you some extra insights. All electronics swap and GoPro swap from Arwing Pro to Dolphin, same FC, same servos, (Arwing Pro linkage are stronger but I reinforced the elevons as much as I could), similar auto tune and auto trim strategy (Inav), similar PIDs tuning strategy. Similar weather conditions but not the same, stabilisation in the GoPro is enabled for both. Dolphin is much more stable both in pitch and roll. Check my latest video (steady flight with raw caddx vista - GoPro failed to record)

• 
  @HeraklionFPV4 ай бұрын

  @@acropilot5693 wow impressive! Will definitely check it out. I'm building my dolphin too these days and will be getting in the air hopefully soon! Thanks for the reply.

• 
  @NorthIceMan4 ай бұрын

  What Goggles and what VTX ?

• 
  @acropilot56934 ай бұрын

  DJI V2 with Caddx Vista

• 
  @patricehonvault26124 ай бұрын

  @@acropilot5693 WTFOS firmware ?

• 
  @acropilot56934 ай бұрын

  yes

• 
  @NorthIceMan4 ай бұрын

  @@acropilot5693 Nice!