Just a guy lost in the world of love, life and cars ...and more cars!
Join me as I take you to new experiences, expand your knowledge, and take you for a front row seat with my content!
My Daily Driver:
2017 Ford Fusion Sport AWD Twin Turbo
My Dream Car:
1969 Dodge Charger R/T
Car I want:
2021 Dodge Charger Daytona 392
Пікірлер
Is there any fluid supposed to be in it??
Got any videos of it revving or driving?
mm mm mmmmm barolo red prefacelift.. thing of beauty. and a wiestec blower? dream car.
and hre's? man i need this
yeah such a shame the rear fenders can hold a max of 275mm tires as a rwd v8 vehicle.. this car is a great candidate for widebody arches in the rear at the very least
If you want to get rid of ANY noise in your vehicle. Just try to record it or show someone. The noise will be gone 100% of the time.
Few seem to know that the R -design also has a quicker steering rack, different bushings and monotube front dampers with lower and stiffer springs and damping.
Talking to much just get to it
It’s not staying on
Would this work on the 03 Mk1?
Went from 09 maxima to 16 charger 14 Camaro now 17 fusion
Sir i wanna know are they illuminated ac knobs
Did you have trouble getting the underbody panel back on?
I did near the driver side IIRC from the much bigger FMIC, however I was able to make it work and close it up. I don't think I was able to get a bolt in one of the holes for it though
Hey man where you been! Did this teplace the Fusion Sport🤔
Hey bud! I’ve been around. We had a new addition to our family last June so I’ve been busy with our son lol. I plan on doing a walk around and video about the new car lol yes this did replace the Fusion! Slow as shit, but gives me many more benefits
@@thundrstruck87 congrats on the little one👍👍
@@klasseact6663 thank you! 😁 hope you’re doing well!
I am doing the same DIY. Thank you for this!
Is it reliable and does it break easy?
It is, and hasn't broken yet! It's rolled over plenty of times too.
Yes, I am alive and well! A lot has happened in life that that took priority. Taking advantage of Shorts as it’s a lot easier and faster to upload. Hope y’all are doing well!
Hope your doing well too!
I tried the same procedure and the 3rd dispersion button is stuck towards the feet and doesn't work anymore. What can I do to unlock it. I have a ford focus mk3 2012. Thank you!!
have you found a solution? I have a ford mk3 2012 and have the same problem. Thanks.
Now it's sadly out of date so you can't use it :(
What size are the lug Nuts on the fusion sports I can't find then anywhere they are bigger than the M12x1.5 lug nuts that are for the fusions like the 2.0, 1.5 & 2.5 engines
I tried to replace it myself, but on the 3rd dispersion button, it was stuck to the dispersion legs and it no longer spins.😢 What can I do? I followed exactly as in the clip. What do I do to unlock it?
i have the same car 2017 Ford Fusion Sport identical color. When you change pads and rotors you keep the same callipers are they the originals one or you have already change it due to the red color , are they the same size as the OEM ones .can I use the R1 concepts kit on OEM callipers or have to change them to a perfect fit ,because on video pads and rotors look bigger
The calipers are OEM, I just painted them red. You can use the R1 concept ones with the OEM caliper, everything should match up correctly with your make model and year and the selections on R1's website.
Nice bro!!✌🤝
and what if the chromebook slot is too small bub
I got the same BDX tuner from unleashed but don't have the fuspo option for gauges/datalog. Cloud updates and device updates don't find anything, do you think this is a SCT or unleashed thing??
Hey, I know im late but will this cause my engine to run rich?
Hey! No it will not
Hello Tj, ACC is working after installed FMIC???
Hey Igor, yes, ACC is working just as good!
thank you
What size is the caliper bolt ?
Looks good i like it. Being different is the way to go in the same way if i like it and wanna do it I'm gonna do it
Like the idea but not for 200 bucks😭this worth 50bucks most
Ohhhh sweet I'm finna get one this summer simpler than I thought
Massive help thank you
Hey can u send to me this because here is not available...
How have they held up after some time? No rapid wear?
They’ve held up great! No issues at all.
Mine don't come of on a peugeot. Kept trying to pull the old ones but no chance
Which USB port do you connect? the micro B on the bottom of device? or the mini-b on the HDMI cable?
The USB to Micro USB is what I use to grab the datalog from the device. The HDMI is for going to the OBD2 port.
@@thundrstruck87 on the SIDE of the HDMI is a micro-b port. it fried my laptop usb hub. its 12volt
I’m going to get a fusion sport soon and I’m wondering what does this do to performance
It's a 50/50 mix. When I went from a full atmosphere BOV to this, I found it kept boost better when letting off the throttle and back onto it. I also felt it was more responsive. IIRC, I think I tried doing a comparison, but the data didn't work out like how I wanted too.
@@thundrstruck87 ok thx, I just bought a 17 fusion sport with 47k miles 2 days ago and I’m already in love
@@casio5658 steeda cold air intake is a nice upgrade.
@@zachpowell9087 that’s one of the first things ima do and get the borla axel back exhaust
@@casio5658ive just installed the mrt axle back. Keep in mind they are very loud and will most likely have a constant drone. If you go that route the blow off sound wont be very useful so i suggest the one in this video for better throttle response.
Hi mate I have purchased one of these, is yours a diverter valve, I have a ford focus 1.5 ecoboost zetec s, is it in the same place. Cheers
Hey James! Mine is a diverter valve, it get's plumbed back into the system. It more than likely won't be in the same place and they're two different engines. I would trace the intake box to the turbo and between those two locations should be your BPV.
Where can I get one
From SpoilerKing
TJ you disconnect 2 sensors from OEM intercooler. Where you connect them? Thanks
One goes back onto the post intercooler elbow that sits under the passenger headlight, and the other goes to the Radar for the ACC.
If I may ask, where did you get the yellow for the fog lamps?
From Lamin-X
How long did it take to ship
Probably took a couple days
Looks good
What year is the fusion?
2017
Lol 40 miles that's great congrats man. I got my 2014 Titanium 2.0 at 106k miles got a warranty the transmission went at 113k miles warranty covered it. Almost 5 years later I have it and it's the best. Just got a cai
I had a JST tuned and full bolt on ST, now I own a 18 fusion sport. I can’t wait to 93 tune it
I must have either really good luck with my exhaust cutout, or the cutout I bought is really good quality, because I have been using mine on my MK7 GTI for almost 5 years now, and I’ve had zero issues. It’s been used in extreme weather conditions, on both ends, from daily 12°F weather in UT winters, down to negative 15°-18°F (after wind chill) in high mountains ski resorts, to 110°F+ in AZ summers. Not an ounce of rust. Zero leaks. Hardware works perfectly every time I use the switch. The two main factors I think that have resulted in a very positive experience with my exhaust cutout, are: 1. Brand. I chose the ECS Tuning exhaust cutout. Stainless steel, and great build quality. Yes, there are cheaper exhaust cutouts out there, but then you sacrifice quality issues. 2. I chose to have my exhaust cutout welded into my downpipe, instead of clamping it on. This provided a solid construction, as well as a leak proof seal. Literally cost me $60 for a lm exhaust shop to do this. No brainer to do this for that cost.
These things are disposable. Be prepared to repair or replace every two to three years depending on weather and use.
😂 i got recommended this
Everybody talks about how comfortable the Volvo C30 is. I would like to test drive one and it has to be a 6 speed manual.
Information was good, but the video was not steady or clear.