Наитупейшая работа, Rebol - не ремонт, это не может вылечить электромиграцию(деградацию чипа) , вся магия данного процесса в экстремальном прогреве чипа, с тем же успехом можно было просто пропаять без новых шариков эффект был бы аналогичным. нас пытаются убедить в том что замена припоя важная часть данной процедуры! а по факту это не так. Чип нужно менять на новый, этот перестанет работать опять пол года! так как проблема не шариках а в тех процессе чипа, и он просто деградирует! Говорю как профессионал в данной области. не ведитесь на эту чушь. если вам говорят нужно сделать ребол, знайте вас просто обманывают!
@RedOverlord3 күн бұрын
Sir, I believe you misunderstood what is going on. I took a donor chip from another motherboard, so yes I did in fact replace it.
@user-zp3tc1zx9b2 күн бұрын
@@RedOverlord , если это так. замечательно. на видео это не видно, кажется что происходит обычный ребол, а не замена с донора. в любом случаи использовать старые чипы не очень надежно с тем учетом что данный чип склонен к деградации(электромиграции). нужно ставить новые детали!
@kipper2kКүн бұрын
@@user-zp3tc1zx9b not necessary, BGA chips can/will last a long time if the environment is good, for example... old game consoles 20 years old
@RedOverlordКүн бұрын
@@user-zp3tc1zx9b new chips are not available. the original chip overheated so much that it died. I took a donor gpu from a regular xbox which should be perfectly fine, I used low temperatures for reballing and soldering.
@user-zp3tc1zx9b23 сағат бұрын
@@RedOverlord , я живу в России, и наша страна обложена санкциями как не какая другая, и не смотря на это я могу заказать такой оригинальный новый чип, не смотря на возраст и то что он давно снят с производства, я все равно могу это сделать. и это не алиэкспресс. в период с 2000-2009 год много разных компаний выпускали чипы с ошибочной микроархитектурой, которая приводила чипы к деградации/преждевременному старению(к так называемой электромиграции), перегрев/нагрев только катализатор, а не причина неисправности. данный дефект диагностируется очень просто, необходимо просто пропаять чип(до полного плавления припоя, можно даже подвигать чип для верности), если после этого начинает работать то чип на 100% с электромиграцией и нуждается в замене на новый. данные чипы nvidia также склонны к этому дефекту, как и много других из этого временного периода. перегрева при пайки боятся только чипы с напаянными на подложку кристаллом. так как их кристалл напаян на подложку на такие же шарики припоя только более маленького размера, и свободное пространство залито компаундом, который расширяется при нагреве, таким образом при достижении температуры плавления припой фактически выдавливается компаундом. и чип становится негодным. поэтому такие чипы желательно реболить на более легкоплавкий припой, на свинцово оловянный(180с) или на оловянно висмутовый. (138с). также не рекомендую использовать оплетку для удаления припоя, этот способ очень агрессивный, часто вызывает повреждения маски или самих дорожек. есть более простой, и более безопасный способ, необходимо пропаять нужные площадки сплавом "розе", после данный участок подогревается до 110-120с и обычной салфеткой(из нетканого материала) место протирается, весь припой остается на салфетке.
@chiefer65tpt187 күн бұрын
Cool as long as you dont want to play online. Region Restricted.
@Johnny_LuvBuckets6 күн бұрын
Custom firmware...
@johnnyrevas999211 күн бұрын
I believe windows xp shut down sound is not here:( Is it tools. Turner: nope.
@jorgmarowsky724213 күн бұрын
Hast super gemacht 3000€ geräte gekauft um ein 500mhz Grafikchip zu tauschen macht sinn ich hätte mir von dem geld ne gute Grafikkarte geholt mit über 2000mhz den den playstation 3 emulator genutz in verbessert grafik 😂due Spiele in4k gezockt
@RedOverlord12 күн бұрын
You are missing the point completely. This is a hobby of mine and a way to make money repairing different devices. I did not buy all this to replace one RSX on one PS3.
@jorgmarowsky724213 күн бұрын
Hat jeder zuhause son set 😂
@ismawel8113 күн бұрын
Eres un tío muy grande!, buen vídeo!, aprecio y me gusta ver como una persona le da vida a un objeto muerto.✌🏻
@kecapmantis320514 күн бұрын
so this mod doesnt need ORBIZ Mod chip anymore? only syscon training ?
@RedOverlord12 күн бұрын
Yes only SYSCON training needed
@kecapmantis320512 күн бұрын
What kind of ic that you use to lower the voltage?
I gotta get one of these one day. Even though I have a beefy PC and a ps2 plus a few slim PS3s. You just can't beat a fat PS3.
@antoinedrela79416 күн бұрын
Amazing! Great skill! Well done, good job!
@badrharbi640316 күн бұрын
Great job, do you have cecha01 and how much? I have yellow one can send-it to you , how much the cost? Thank you
@RedOverlord16 күн бұрын
I have an A00 with a 40nm €750
@you_commentbackyourmomahoe15 күн бұрын
@@RedOverlord don't you think this is overpriced?
@frankyfife11 күн бұрын
@@RedOverlord i'm interested in buying thoose, i live in germany. Is the console modified in exactly the same way as the one shown here (especially, r the tantalum pcbs used)? what is the optical condition of the console you offer? how can we get in touch besides youtube? i have CECHB00 (the full black one 20 GB Modell), working perfectly in very good technical and optical condition. no heat problem and no graphics problem. but i read that you don't receive hardware for repairs. otherwise i would ask you to do a preventive replacement of the gpu on theese :D. i've heard that the B00 models tend to suffer from backwards compatibility after a rsx change (ps2 in particular), is this the case with the A00 models too?
@RedOverlord10 күн бұрын
@@frankyfife you can send me a DM on instagram @toinescustomsconsoles and we can talk there. yes built the same way. I live in the Netherlands ;) and yes A00 and B00 (COK-001) can have a bad ps2 side. one of mine has it too.
@JeysonRamos17 күн бұрын
hi i want to know whaat its your preheating 15:00
@RedOverlord17 күн бұрын
160c for a few minutes, then I assist with hot air around 220c
@AnnaVannieuwenhuyse10 күн бұрын
If you want to know what device that is, it's a Mechanic branded preheater plate.
@azotbeksultankulov293018 күн бұрын
Это какой мотошторм?
@RedOverlord18 күн бұрын
First one
@NSC-Modz18 күн бұрын
Bro. I hope you love that NSC IHS TOOL 😀 You need more practice but nice Cut ✌️
@RedOverlord18 күн бұрын
yeah haven't done alot of them but usually there is no problem thanks for providing me this IHS tool
@rorykelly827518 күн бұрын
Why the awful harsh brash music? Really put me off watching
@RedOverlord18 күн бұрын
Sorry, I'll try to keep that in mind for next time
@rorykelly827518 күн бұрын
@@RedOverlord aww thanks that’s great, much appreciated my friend
@pixel_rez18 күн бұрын
А что прошивается в начале видео?
@trespernas1918 күн бұрын
name of the game at the end of the video? thx
@RedOverlord18 күн бұрын
motorstorm
@Josh.Davidson18 күн бұрын
Excellent job
@Doyle6918 күн бұрын
Interesting stuff. How come you heat the boards for 24hours? remove moisture?
@RedOverlord18 күн бұрын
exactly :)
@Doyle6917 күн бұрын
@@RedOverlord Nice.
@TonDasPromos19 күн бұрын
Belo trabalho e a temperatura da rsx ficou boa agora abaixo até do que is ps3 super slim
@LONELY-VISUAL19 күн бұрын
What changes after this?
@RedOverlord18 күн бұрын
its a GPU swap from a later slim model PS3. its to deal with the yellow light of death the original 90nm chips have. 40nm GPU's run cooler, use less power, and overclock way higher.
@jovieasyrof201719 күн бұрын
the feeling must be very rewarding
@RedOverlord18 күн бұрын
yes it is :) this is number five
@Josh.Davidson19 күн бұрын
Great job Red!
@cristianmolina688919 күн бұрын
Massive skill. Congratulations for being this awesome. Huge mod man 🎉🎉🎉🎉
@computerbooter156619 күн бұрын
Frankie! Frankie! Frankie! Nice job brother
@cleilson733619 күн бұрын
Como que faço pra conseguir um desses?
@RedOverlord18 күн бұрын
you can contact me on instagram: @toinescustomconsoles and I can sell you one
@shauncosway20 күн бұрын
Great work mate , The HR460 is an awsome machine.
@RedOverlord20 күн бұрын
Sure is, got it for a year and a half now I think. No complaints at all, nicer then the IR based systems
@Kief_20 күн бұрын
Kief approves
@RedOverlord20 күн бұрын
Thank you kief 🙏
@barnseyy534620 күн бұрын
Where are you located? I’d like this done
@RedOverlord20 күн бұрын
In the Netherlands, I don't really do send ins. But I could probably sell you a system. Got multiple of the same model in this week
@WareWolf80120 күн бұрын
Bought one of these for my kids when they were little. What a machine! I remember fixing the tray once, to load disks properly. What a nightmare. This is 100x more work, but really cool to watch. Wish I knew what the different things are for, and why you're changing them. I'm a nerd, but don't know a ton about mod'ing these. I did mod a few PSP's back in this era though. Also fun machines. Thanks for making this content.
@RedOverlord20 күн бұрын
The programming, resistor changes, and the voltage lowering is to get the new chip running right. The black squares are capacitors I switch out as preventitive maintenaince. In the end I cut the IHS plate from the CPU so I can replace the thermalpaste underneath. Thanks for watching
@antoinedrela79416 күн бұрын
@@RedOverlord I need to delid my ps3 also, but i'm afraid, i don't have any tools able to fit for the job :/
@ukemix884821 күн бұрын
👏
@mrman775421 күн бұрын
Frankenstein was the doctor Anyway, carry on
@RedOverlord20 күн бұрын
Thats right, in this case thats me. I make a system out of parts from different ps3's
@mrman775420 күн бұрын
I responded based on the thumbnail
@Andr0-Zero21 күн бұрын
Great video again! Love the tune selection too!
@Kief_19 күн бұрын
@@Andr0-Zero we need ogx vids
@Rambonz221 күн бұрын
Awesome video mate. Keep it up!
@brucey8722 күн бұрын
Nice work mate 👍🏻 Thanks for sharing the process
@willgraham972522 күн бұрын
Awesome. Would you ever do a tutorial?
@RedOverlord22 күн бұрын
Not really necessary, I linked all the info necessary and computer booter did alot of videos about this mod.
@willgraham97252 күн бұрын
@@RedOverlordI’d love to watch it!
@nkls28722 күн бұрын
great video
@ConsoleKingRepair22 күн бұрын
Great video my guy.
@RedOverlord22 күн бұрын
Thanks sir
@androidphone632325 күн бұрын
😅
@user-jq5qx9lf2c25 күн бұрын
Hi. What kind of stencil do you use?
@RedOverlord25 күн бұрын
Custom stencil made by my friend zzattack. I believe his stencils are available on his github page
@peterlandry29 күн бұрын
Nice video, great music.
@netten2057Ай бұрын
if google says : The Sega Chihiro: an officially-licensed arcade cabinet powered by the Xbox's motherboard : r/originalxbox ,, so ? i can turn and old xbox in a sega chihiro ? , is the same board ?????
@RedOverlordАй бұрын
there is a tutorial out there somewhere that tells you how to convert a retail xbox motherboard to chihiro. but you also need a chihiro chassis, its not just an xbox that powers it there are many sega specific parts that connect to the xbox board.
@netten2057Ай бұрын
@@RedOverlord wow !! thanks for that , im gonna search i hope i can find it !! i have an xbox , thanksss
@dedxboxАй бұрын
@@netten2057 There are versions of Ghost Squad, Outrun 2 (Beta) and Virtua Cop 3, for XBOX 128MO RAM
@jm03629 күн бұрын
Think you can run some chihiro games on an Xbox with a 128MB RAM mod
@netten205729 күн бұрын
@@jm036 I don't know, but if there is a way to do it, I can do it. I also have a reballing machine and I can make the necessary modifications if there is a way , I didn't even know there was such a thing as Chihiro, I'm just now watching and studying it.
@user-wy6dd6ku7cАй бұрын
I also see that you changed those electrolytic capacitors.
@RedOverlordАй бұрын
I did not actually, usually I do as a standard maintenance procedure but these looked perfect. customer can solder so if it becomes a problem he can swap them out.
@AnnaVannieuwenhuyse10 күн бұрын
@@RedOverlord Oh? To me it looked like several of the previously damaged capacitors had actually started outright bulging out or leaking after your 24 hour bake period. They looked bulged, I could see that much. That's on the donor board though, I think..
@kipper2kКүн бұрын
@@AnnaVannieuwenhuyse they were on the donor board
@canaldrive_rАй бұрын
Que capricho na execução do serviço! Instrumentos adequados, insumos de qualidade, uso de luvas, ótimo posicionamento de câmera, trilha sonora de bom gosto... Parabéns pelo excelente vídeo. Abraço do seu colega do Brasil. 😃👍
@RedOverlordАй бұрын
thank you very much! appreciate it :)
@ExSiegfriedАй бұрын
There's a bridge between 2 pads in the gpu at 22:16 😮
@RedOverlordАй бұрын
I see what you are saying! Probably a piece of cotton swab
@ExSiegfriedАй бұрын
@@RedOverlord probably but it really look like solder to me but still a pretty good job overall 👌🏼
@95ComicsАй бұрын
Is it possible to upgrade to a better gpu? Maybe with one of those laptop gpu replacement extension cables to an mxm or full size board? Just looking for a new project 😂 dont mind me!
@RedOverlordАй бұрын
The original xbox revision 1.6 XGPU-B is better but its not backwards compatible. Other then that I dont think so
@dedxboxАй бұрын
@@RedOverlord The XBOX V1.6 has bugs, in 720p, 1080i and 16/9.
@RicardoRamosRetrocomputacao26 күн бұрын
No, its kernel and bios are prepared to work only with the specified hardware. Its GPU doesn't even exist on the consumer market, it's a kind of GF4 prototype, game programming expects specific features from this GPU (which are not present in other desktop ones) the only thing you can do on this console is to upgrade the processor and RAM memory. The closest you can come to improving image quality is to adapt an HDMI mod directly to the test points on the motherboard, where you will get a clean, crystal-clear signal, superior to any HDMI mod using the standard cable connection. console. Version 1.6 was also entirely manufactured in China, and had major changes in production quality (for the worse). In my experience, version 1.0 ~ 1.1 does not have a very good analog signal processor, and from 1.5 onwards this processor is not so good again. The best image quality is more or less in 1.2 and 1.4, they also use the improved heatsink on the GPU that does not require a cooler (they are quieter) and accept practically all mods, you just need to find one that has not been damaged by the clock capacitor. Nowadays there are even watercooler solutions with 60mm radiators that are efficient for tdps of up to 45w, pico power supplies with efficiency of almost 90%, low noise, low ripple... so I understand that we have reached the sweet point in the console's life where we have a huge range of possibilities for improving it.
@RicardoRamosRetrocomputacao26 күн бұрын
I'm sad that the hacking community has been BUYED by Sony and Microsoft, since the xbox one, we haven't seen anything cool, no modchips, jailbreaks, or cool mods.
@nice8DАй бұрын
Amazing to see Red!
@RedOverlordАй бұрын
thanks!
@nice8DАй бұрын
@@RedOverlord I never knew that Saga made a arcade cabinet using a modified xbox pcb. I thought that was neat! Thanks for the little info nugget! :D Btw this is Lord Virus. Nice to see you doing paid repairs at this high of a standard!
@RedOverlordАй бұрын
@@nice8D I knew that was you ;) can't fool me with name changes. thank you for the kind words
@Rambonz2Ай бұрын
Awesome man, keep it up.
@RedOverlordАй бұрын
thank you!
@mikeyp4690Ай бұрын
Quality stuff!
@Trako26Ай бұрын
Is this an original xbox that has been used in a Sega cabinet?
@RedOverlordАй бұрын
Kind of, its not really an xbox. If you google "Sega chihiro type 3" and then images you can see it doesnt look like an xbox at all. Its a system developed by sega with a "modified" original xbox motherboard inside of it that does the heavy lifting. Im using an original xbox shell for testing purposes only. this motherboard with a chihiro bios will not function at all in a regular xbox chassis.
Пікірлер
Are CECHA00 with the frankie mod region free ?
Yes when loaded with evilnat CFW they are :)
Наитупейшая работа, Rebol - не ремонт, это не может вылечить электромиграцию(деградацию чипа) , вся магия данного процесса в экстремальном прогреве чипа, с тем же успехом можно было просто пропаять без новых шариков эффект был бы аналогичным. нас пытаются убедить в том что замена припоя важная часть данной процедуры! а по факту это не так. Чип нужно менять на новый, этот перестанет работать опять пол года! так как проблема не шариках а в тех процессе чипа, и он просто деградирует! Говорю как профессионал в данной области. не ведитесь на эту чушь. если вам говорят нужно сделать ребол, знайте вас просто обманывают!
Sir, I believe you misunderstood what is going on. I took a donor chip from another motherboard, so yes I did in fact replace it.
@@RedOverlord , если это так. замечательно. на видео это не видно, кажется что происходит обычный ребол, а не замена с донора. в любом случаи использовать старые чипы не очень надежно с тем учетом что данный чип склонен к деградации(электромиграции). нужно ставить новые детали!
@@user-zp3tc1zx9b not necessary, BGA chips can/will last a long time if the environment is good, for example... old game consoles 20 years old
@@user-zp3tc1zx9b new chips are not available. the original chip overheated so much that it died. I took a donor gpu from a regular xbox which should be perfectly fine, I used low temperatures for reballing and soldering.
@@RedOverlord , я живу в России, и наша страна обложена санкциями как не какая другая, и не смотря на это я могу заказать такой оригинальный новый чип, не смотря на возраст и то что он давно снят с производства, я все равно могу это сделать. и это не алиэкспресс. в период с 2000-2009 год много разных компаний выпускали чипы с ошибочной микроархитектурой, которая приводила чипы к деградации/преждевременному старению(к так называемой электромиграции), перегрев/нагрев только катализатор, а не причина неисправности. данный дефект диагностируется очень просто, необходимо просто пропаять чип(до полного плавления припоя, можно даже подвигать чип для верности), если после этого начинает работать то чип на 100% с электромиграцией и нуждается в замене на новый. данные чипы nvidia также склонны к этому дефекту, как и много других из этого временного периода. перегрева при пайки боятся только чипы с напаянными на подложку кристаллом. так как их кристалл напаян на подложку на такие же шарики припоя только более маленького размера, и свободное пространство залито компаундом, который расширяется при нагреве, таким образом при достижении температуры плавления припой фактически выдавливается компаундом. и чип становится негодным. поэтому такие чипы желательно реболить на более легкоплавкий припой, на свинцово оловянный(180с) или на оловянно висмутовый. (138с). также не рекомендую использовать оплетку для удаления припоя, этот способ очень агрессивный, часто вызывает повреждения маски или самих дорожек. есть более простой, и более безопасный способ, необходимо пропаять нужные площадки сплавом "розе", после данный участок подогревается до 110-120с и обычной салфеткой(из нетканого материала) место протирается, весь припой остается на салфетке.
Cool as long as you dont want to play online. Region Restricted.
Custom firmware...
I believe windows xp shut down sound is not here:( Is it tools. Turner: nope.
Hast super gemacht 3000€ geräte gekauft um ein 500mhz Grafikchip zu tauschen macht sinn ich hätte mir von dem geld ne gute Grafikkarte geholt mit über 2000mhz den den playstation 3 emulator genutz in verbessert grafik 😂due Spiele in4k gezockt
You are missing the point completely. This is a hobby of mine and a way to make money repairing different devices. I did not buy all this to replace one RSX on one PS3.
Hat jeder zuhause son set 😂
Eres un tío muy grande!, buen vídeo!, aprecio y me gusta ver como una persona le da vida a un objeto muerto.✌🏻
so this mod doesnt need ORBIZ Mod chip anymore? only syscon training ?
Yes only SYSCON training needed
What kind of ic that you use to lower the voltage?
@@kecapmantis3205 www.psx-place.com/threads/frankenstein-phat-ps3-cecha-with-40nm-rsx.28069/page-76#post-324546
I gotta get one of these one day. Even though I have a beefy PC and a ps2 plus a few slim PS3s. You just can't beat a fat PS3.
Amazing! Great skill! Well done, good job!
Great job, do you have cecha01 and how much? I have yellow one can send-it to you , how much the cost? Thank you
I have an A00 with a 40nm €750
@@RedOverlord don't you think this is overpriced?
@@RedOverlord i'm interested in buying thoose, i live in germany. Is the console modified in exactly the same way as the one shown here (especially, r the tantalum pcbs used)? what is the optical condition of the console you offer? how can we get in touch besides youtube? i have CECHB00 (the full black one 20 GB Modell), working perfectly in very good technical and optical condition. no heat problem and no graphics problem. but i read that you don't receive hardware for repairs. otherwise i would ask you to do a preventive replacement of the gpu on theese :D. i've heard that the B00 models tend to suffer from backwards compatibility after a rsx change (ps2 in particular), is this the case with the A00 models too?
@@frankyfife you can send me a DM on instagram @toinescustomsconsoles and we can talk there. yes built the same way. I live in the Netherlands ;) and yes A00 and B00 (COK-001) can have a bad ps2 side. one of mine has it too.
hi i want to know whaat its your preheating 15:00
160c for a few minutes, then I assist with hot air around 220c
If you want to know what device that is, it's a Mechanic branded preheater plate.
Это какой мотошторм?
First one
Bro. I hope you love that NSC IHS TOOL 😀 You need more practice but nice Cut ✌️
yeah haven't done alot of them but usually there is no problem thanks for providing me this IHS tool
Why the awful harsh brash music? Really put me off watching
Sorry, I'll try to keep that in mind for next time
@@RedOverlord aww thanks that’s great, much appreciated my friend
А что прошивается в начале видео?
name of the game at the end of the video? thx
motorstorm
Excellent job
Interesting stuff. How come you heat the boards for 24hours? remove moisture?
exactly :)
@@RedOverlord Nice.
Belo trabalho e a temperatura da rsx ficou boa agora abaixo até do que is ps3 super slim
What changes after this?
its a GPU swap from a later slim model PS3. its to deal with the yellow light of death the original 90nm chips have. 40nm GPU's run cooler, use less power, and overclock way higher.
the feeling must be very rewarding
yes it is :) this is number five
Great job Red!
Massive skill. Congratulations for being this awesome. Huge mod man 🎉🎉🎉🎉
Frankie! Frankie! Frankie! Nice job brother
Como que faço pra conseguir um desses?
you can contact me on instagram: @toinescustomconsoles and I can sell you one
Great work mate , The HR460 is an awsome machine.
Sure is, got it for a year and a half now I think. No complaints at all, nicer then the IR based systems
Kief approves
Thank you kief 🙏
Where are you located? I’d like this done
In the Netherlands, I don't really do send ins. But I could probably sell you a system. Got multiple of the same model in this week
Bought one of these for my kids when they were little. What a machine! I remember fixing the tray once, to load disks properly. What a nightmare. This is 100x more work, but really cool to watch. Wish I knew what the different things are for, and why you're changing them. I'm a nerd, but don't know a ton about mod'ing these. I did mod a few PSP's back in this era though. Also fun machines. Thanks for making this content.
The programming, resistor changes, and the voltage lowering is to get the new chip running right. The black squares are capacitors I switch out as preventitive maintenaince. In the end I cut the IHS plate from the CPU so I can replace the thermalpaste underneath. Thanks for watching
@@RedOverlord I need to delid my ps3 also, but i'm afraid, i don't have any tools able to fit for the job :/
👏
Frankenstein was the doctor Anyway, carry on
Thats right, in this case thats me. I make a system out of parts from different ps3's
I responded based on the thumbnail
Great video again! Love the tune selection too!
@@Andr0-Zero we need ogx vids
Awesome video mate. Keep it up!
Nice work mate 👍🏻 Thanks for sharing the process
Awesome. Would you ever do a tutorial?
Not really necessary, I linked all the info necessary and computer booter did alot of videos about this mod.
@@RedOverlordI’d love to watch it!
great video
Great video my guy.
Thanks sir
😅
Hi. What kind of stencil do you use?
Custom stencil made by my friend zzattack. I believe his stencils are available on his github page
Nice video, great music.
if google says : The Sega Chihiro: an officially-licensed arcade cabinet powered by the Xbox's motherboard : r/originalxbox ,, so ? i can turn and old xbox in a sega chihiro ? , is the same board ?????
there is a tutorial out there somewhere that tells you how to convert a retail xbox motherboard to chihiro. but you also need a chihiro chassis, its not just an xbox that powers it there are many sega specific parts that connect to the xbox board.
@@RedOverlord wow !! thanks for that , im gonna search i hope i can find it !! i have an xbox , thanksss
@@netten2057 There are versions of Ghost Squad, Outrun 2 (Beta) and Virtua Cop 3, for XBOX 128MO RAM
Think you can run some chihiro games on an Xbox with a 128MB RAM mod
@@jm036 I don't know, but if there is a way to do it, I can do it. I also have a reballing machine and I can make the necessary modifications if there is a way , I didn't even know there was such a thing as Chihiro, I'm just now watching and studying it.
I also see that you changed those electrolytic capacitors.
I did not actually, usually I do as a standard maintenance procedure but these looked perfect. customer can solder so if it becomes a problem he can swap them out.
@@RedOverlord Oh? To me it looked like several of the previously damaged capacitors had actually started outright bulging out or leaking after your 24 hour bake period. They looked bulged, I could see that much. That's on the donor board though, I think..
@@AnnaVannieuwenhuyse they were on the donor board
Que capricho na execução do serviço! Instrumentos adequados, insumos de qualidade, uso de luvas, ótimo posicionamento de câmera, trilha sonora de bom gosto... Parabéns pelo excelente vídeo. Abraço do seu colega do Brasil. 😃👍
thank you very much! appreciate it :)
There's a bridge between 2 pads in the gpu at 22:16 😮
I see what you are saying! Probably a piece of cotton swab
@@RedOverlord probably but it really look like solder to me but still a pretty good job overall 👌🏼
Is it possible to upgrade to a better gpu? Maybe with one of those laptop gpu replacement extension cables to an mxm or full size board? Just looking for a new project 😂 dont mind me!
The original xbox revision 1.6 XGPU-B is better but its not backwards compatible. Other then that I dont think so
@@RedOverlord The XBOX V1.6 has bugs, in 720p, 1080i and 16/9.
No, its kernel and bios are prepared to work only with the specified hardware. Its GPU doesn't even exist on the consumer market, it's a kind of GF4 prototype, game programming expects specific features from this GPU (which are not present in other desktop ones) the only thing you can do on this console is to upgrade the processor and RAM memory. The closest you can come to improving image quality is to adapt an HDMI mod directly to the test points on the motherboard, where you will get a clean, crystal-clear signal, superior to any HDMI mod using the standard cable connection. console. Version 1.6 was also entirely manufactured in China, and had major changes in production quality (for the worse). In my experience, version 1.0 ~ 1.1 does not have a very good analog signal processor, and from 1.5 onwards this processor is not so good again. The best image quality is more or less in 1.2 and 1.4, they also use the improved heatsink on the GPU that does not require a cooler (they are quieter) and accept practically all mods, you just need to find one that has not been damaged by the clock capacitor. Nowadays there are even watercooler solutions with 60mm radiators that are efficient for tdps of up to 45w, pico power supplies with efficiency of almost 90%, low noise, low ripple... so I understand that we have reached the sweet point in the console's life where we have a huge range of possibilities for improving it.
I'm sad that the hacking community has been BUYED by Sony and Microsoft, since the xbox one, we haven't seen anything cool, no modchips, jailbreaks, or cool mods.
Amazing to see Red!
thanks!
@@RedOverlord I never knew that Saga made a arcade cabinet using a modified xbox pcb. I thought that was neat! Thanks for the little info nugget! :D Btw this is Lord Virus. Nice to see you doing paid repairs at this high of a standard!
@@nice8D I knew that was you ;) can't fool me with name changes. thank you for the kind words
Awesome man, keep it up.
thank you!
Quality stuff!
Is this an original xbox that has been used in a Sega cabinet?
Kind of, its not really an xbox. If you google "Sega chihiro type 3" and then images you can see it doesnt look like an xbox at all. Its a system developed by sega with a "modified" original xbox motherboard inside of it that does the heavy lifting. Im using an original xbox shell for testing purposes only. this motherboard with a chihiro bios will not function at all in a regular xbox chassis.