Dam can’t find those castors with the bar support anymore !
@dominicfong634111 ай бұрын
Your presentation is so simple to follow & straight-to-the-point just like the assembly manual that comes from IKEA.
@niwarthanakahandavita4116 Жыл бұрын
Where did you buy the weels ?
@bmbacchus Жыл бұрын
Where do you get the wheels and bars?
@KyAl22 жыл бұрын
Why did you only don one video. You are a natural and should do more. Great enthusiasm and good demonstration.
@herbanexplorer88382 жыл бұрын
Great video! Where did you get the bars that hold the wheel? We are looking for that for a storage solution we are working on. Thanks!
@Samiam1732 жыл бұрын
What if you want to put two units side by side?
@lajavetteford43082 жыл бұрын
They must not make these anymore because I can’t find them online…
@VAwitch2 жыл бұрын
File I would not want the bracket to stick out last the front of the shelf, I appreciate you showing how ready it is.
@DJDiskmachine3 жыл бұрын
Now that’s my kinda carpentry video. Thx bud! :3
@zockerdude3 жыл бұрын
Great video! Exactly what I was looking for. I wish more tutorials would be like yours.
@thecreativeyouthsociety5473 жыл бұрын
"Kallax Instructions are trash"...lol!
@btan58243 жыл бұрын
Enjoyed this vid a lot. Super informative and pleasantly funny :)
@Jungla6943 жыл бұрын
I do tug and pull tests every night before I go to bed. Boom boom....boom boom.
@pauljay73614 жыл бұрын
I’ve just been looking to do this today. I might add extra wheels in the middle as I use my Kallax for vinyl storage. Great vid.
@belyndazolotto4 жыл бұрын
I love your voice! Great tutorial :)
@rosanneperla4 жыл бұрын
Thanks! That was simply done.
@megahurt5 жыл бұрын
I can’t find the wheels. Are they still selling them?
@djfabo63294 жыл бұрын
Joseph Rose No they are not I had to find them off a offbrand website
@ewetoob185 жыл бұрын
Hi there. First, thanks so much for this video. I followed it and it was a huge help with the casters and rail I had sitting in a closet. So much so, that I wanted to put the wheels on my two other Kallax and old Expedit shelves. Guess what ... those steel rails are discontinued 😭. Thought I’d take a chance and ask if you know where else to get them (or even if you’d like to sell yours ... if you’re done with them. But why would you be ... they’re so great.). Either way, thanks very much for this helpful tutorial. Really appreciated it.
@gigihinson99565 жыл бұрын
I just added the wheels following your instructions and it went perfectly! This was great!
@djfabo63294 жыл бұрын
Gigi Hinson what Size were the wheel frames
@judyr7832 жыл бұрын
where did you get you wheels ikea doesn't have them any more
@Benrytookthekeys5 жыл бұрын
Where do you get the wheels and the bar they attach to?
@YallAintRight5 жыл бұрын
Benrytookthekeys I think they’re being discontinued (I’m not 100% on that). Reason I think that: they’re not on the IKEA website anymore and they were marked down to $15 in red marker (from $20) when I snagged mine last weekend. Good luck!
@illinoisvideoatlarge80392 жыл бұрын
@@YallAintRight "Unfortunately, our KALLAX rail with 2 casters (article number: 002.886. 57) was discontinued in April 2019. As much as we'd like to help you obtain this product, there's no way to purchase discontinued products once supply runs out.Jun 18, 2019
@loqkLoqkson5 жыл бұрын
Love the presentation style
@Synth20005 жыл бұрын
3 x casters look nice too and it is stronger - in case you put want to put vinyl or books on it.
@parris505 жыл бұрын
When I put the wheel into its place, I can't get it to click. How much force is needed?
@lass-inangeles75645 жыл бұрын
Using a hammer to drive in a screw? And you are teaching HOW TO? Dude, you need lessons yourself first! Don't you own a drill and impact driver? Get a pair. Learn to use them. Then teach.
@yuladias5 жыл бұрын
How bout, you don't like his way, don't do it his way ;) THEN shut it.
@lass-inangeles75645 жыл бұрын
@@yuladias You don't like my comment, then YOU SHUT IT ASSHOLE! I will not have people learning the wrong way to do something so easy. Thank god for people like me who keep things right.
@TheICEgirl61005 жыл бұрын
@@lass-inangeles7564 "thank god for people like me" lmao if it stays put, let the man whatever he wants
@theamandapratt3 жыл бұрын
Kallax is not solid wood. The drill strips the plastic and paper. Your wheels will fall off.
@Austden5 жыл бұрын
Hahaha "flexing a little bit now let's get to it"
@apriljohnson59636 жыл бұрын
Thanks for this!
@launadiva6 жыл бұрын
I put 3 sets of casters on mine to support the weight. Thanks for the video
@enahattley55183 жыл бұрын
I had to put 3 sets also. I had two sets at first. Then the middle started to sag. So I brought more. I'm actually moving I have 2 of the old expedit units. But don't want to move them. I want to purchase two kallax down the road, but was wondering with the slimmed down outer frame will these casters still fit. They are the best part of the unit. In my opinion. Hope some one reads this.
@Sari-S1S6 жыл бұрын
Thanks for making this video!!
@JL-Breaks6 жыл бұрын
Ur awesome..thank you for this
@antheacoxe73016 жыл бұрын
Thanks for the tutorial! Made it so much easier for me :)
@TheSpanishClassroom6 жыл бұрын
Thanks you
@tracysmallacombe77786 жыл бұрын
Thank you! Thought I needed drill but this showed me I didn't!
@judyhowell67426 жыл бұрын
Thanks for sharing!! Great job on the tutorial!
@olegbuchnev31806 жыл бұрын
This is the best tutorial i've seen on youtube. Thanks for that!
Пікірлер
Great job!
Dam can’t find those castors with the bar support anymore !
Your presentation is so simple to follow & straight-to-the-point just like the assembly manual that comes from IKEA.
Where did you buy the weels ?
Where do you get the wheels and bars?
Why did you only don one video. You are a natural and should do more. Great enthusiasm and good demonstration.
Great video! Where did you get the bars that hold the wheel? We are looking for that for a storage solution we are working on. Thanks!
What if you want to put two units side by side?
They must not make these anymore because I can’t find them online…
File I would not want the bracket to stick out last the front of the shelf, I appreciate you showing how ready it is.
Now that’s my kinda carpentry video. Thx bud! :3
Great video! Exactly what I was looking for. I wish more tutorials would be like yours.
"Kallax Instructions are trash"...lol!
Enjoyed this vid a lot. Super informative and pleasantly funny :)
I do tug and pull tests every night before I go to bed. Boom boom....boom boom.
I’ve just been looking to do this today. I might add extra wheels in the middle as I use my Kallax for vinyl storage. Great vid.
I love your voice! Great tutorial :)
Thanks! That was simply done.
I can’t find the wheels. Are they still selling them?
Joseph Rose No they are not I had to find them off a offbrand website
Hi there. First, thanks so much for this video. I followed it and it was a huge help with the casters and rail I had sitting in a closet. So much so, that I wanted to put the wheels on my two other Kallax and old Expedit shelves. Guess what ... those steel rails are discontinued 😭. Thought I’d take a chance and ask if you know where else to get them (or even if you’d like to sell yours ... if you’re done with them. But why would you be ... they’re so great.). Either way, thanks very much for this helpful tutorial. Really appreciated it.
I just added the wheels following your instructions and it went perfectly! This was great!
Gigi Hinson what Size were the wheel frames
where did you get you wheels ikea doesn't have them any more
Where do you get the wheels and the bar they attach to?
Benrytookthekeys I think they’re being discontinued (I’m not 100% on that). Reason I think that: they’re not on the IKEA website anymore and they were marked down to $15 in red marker (from $20) when I snagged mine last weekend. Good luck!
@@YallAintRight "Unfortunately, our KALLAX rail with 2 casters (article number: 002.886. 57) was discontinued in April 2019. As much as we'd like to help you obtain this product, there's no way to purchase discontinued products once supply runs out.Jun 18, 2019
Love the presentation style
3 x casters look nice too and it is stronger - in case you put want to put vinyl or books on it.
When I put the wheel into its place, I can't get it to click. How much force is needed?
Using a hammer to drive in a screw? And you are teaching HOW TO? Dude, you need lessons yourself first! Don't you own a drill and impact driver? Get a pair. Learn to use them. Then teach.
How bout, you don't like his way, don't do it his way ;) THEN shut it.
@@yuladias You don't like my comment, then YOU SHUT IT ASSHOLE! I will not have people learning the wrong way to do something so easy. Thank god for people like me who keep things right.
@@lass-inangeles7564 "thank god for people like me" lmao if it stays put, let the man whatever he wants
Kallax is not solid wood. The drill strips the plastic and paper. Your wheels will fall off.
Hahaha "flexing a little bit now let's get to it"
Thanks for this!
I put 3 sets of casters on mine to support the weight. Thanks for the video
I had to put 3 sets also. I had two sets at first. Then the middle started to sag. So I brought more. I'm actually moving I have 2 of the old expedit units. But don't want to move them. I want to purchase two kallax down the road, but was wondering with the slimmed down outer frame will these casters still fit. They are the best part of the unit. In my opinion. Hope some one reads this.
Thanks for making this video!!
Ur awesome..thank you for this
Thanks for the tutorial! Made it so much easier for me :)
Thanks you
Thank you! Thought I needed drill but this showed me I didn't!
Thanks for sharing!! Great job on the tutorial!
This is the best tutorial i've seen on youtube. Thanks for that!