Dima Mir

Dima Mir

Пікірлер

  • @MacNCheesePro
    @MacNCheesePro2 күн бұрын

    If anyone came here like I did, looking for how to unlock your washer because the panel is out or only beeps but nothing else is working and your clothes are stuck inside: 1) Unplug the washer 2) Get a thin flathead screwdriver 3) Lift up the lid a little bit and look underneath, there is just a thick plastic tab that pops out 4) Use the flathead to sort of scrape/push the tab back towards the washer a little bit at a time Once it's out of the way, the sucker opens right up and you can put your wet clothes in a bucket! lol

  • @GabrielBoboc-qh6wv
    @GabrielBoboc-qh6wv2 күн бұрын

    did Kenmore stole LG washer board? YES!

  • @VickiTurner-c9w
    @VickiTurner-c9w3 күн бұрын

    How do you clean filter on this model?

  • @shade4562
    @shade45624 күн бұрын

    Worked for us! Thanks so much😊

  • @JavierVillazana-i4e
    @JavierVillazana-i4e6 күн бұрын

    Como canselar el seguro de la tapa

  • @ThomasBennett-d5g
    @ThomasBennett-d5g6 күн бұрын

    My machine goes into calibrate mode then tub start in wash mode

  • @mistyhensley8474
    @mistyhensley84747 күн бұрын

    What if it’s giving the code E1 F 5 what is wrong w it

  • @steph.j.g5247
    @steph.j.g52478 күн бұрын

    Is anyones fridge freezing all the food ?

  • @bigredd2866
    @bigredd286610 күн бұрын

    I have no spin in test mode same exact washer help

  • @mrsmincey9731
    @mrsmincey973112 күн бұрын

    Mine just stopped making ice after we got back from a 13 day vacation. We unplugged it for hours and plugged it back up but it's still not making ice and it's not freezing like before any help will do. I read the manual but it's not much help outside of calling samsung for a repair lol.

  • @lace7532
    @lace753213 күн бұрын

    Thank you! My manual was incorrect and said to use temp & soil. Model WA45T3400AW

  • @daisycruz3905
    @daisycruz390514 күн бұрын

    0E my error

  • @Sam12259
    @Sam1225918 күн бұрын

    I have the same fridge but the bottom ice maker isn’t working. I did everything you did and top one recycled but not the bottom one. Anyone else with the same issue.

  • @joshuaborchardt4355
    @joshuaborchardt435520 күн бұрын

    Wow. That told me absolutely nothing.

  • @superlativetech
    @superlativetech25 күн бұрын

    Thank you!!!!

  • @aidanalmeida
    @aidanalmeida28 күн бұрын

    Hey there Dima Mir.

  • @rudolphgreen2641
    @rudolphgreen264129 күн бұрын

    This didnt help. Anyone know of a walkthrough video on youtube?

  • @shakeyabell3104
    @shakeyabell310429 күн бұрын

    It worked 😊

  • @melissacampbell497
    @melissacampbell497Ай бұрын

    My whirlpool cabrio wont spin it just turns itself off after following you lead I got error codes F7 & E 5 what does this mean how do I fix it

  • @user-cg5bq1hp7c
    @user-cg5bq1hp7cАй бұрын

    Thank You So Very Much For your time and making this video. Seems you helped many... God Bless You ❤

  • @ericacervantez4085
    @ericacervantez4085Ай бұрын

    F6 and E3

  • @ericacervantez4085
    @ericacervantez4085Ай бұрын

    Do you know how to turn the chimes back on?

  • @__WJK__
    @__WJK__Ай бұрын

    Please correct the video's title, the model number is MVWB835DW0 (not MWVB835DW0). Other than that, great video/ty!

  • @prestonball4982
    @prestonball4982Ай бұрын

    4 months old and lid switch broken.

  • @darrenprivate4391
    @darrenprivate4391Ай бұрын

    Wtf?

  • @billsouthworth7522
    @billsouthworth7522Ай бұрын

    I have this model but I can’t see or hear the names of the buttons that you’re pressing.

  • @ryanc8608
    @ryanc8608Ай бұрын

    Awesome video. This reset fixed my problem and ice bin is full again. Thank you

  • @neilsherman2680
    @neilsherman2680Ай бұрын

    Just tried, it worked! Note: I had to do this 4 times, then it worked just fine. All this happened after putting the machine in “clean the washer” mode. Hope this tip helps!

  • @neilsherman2680
    @neilsherman2680Ай бұрын

    So, after it failed again, and unable to reach the plug, I tried this: on the main electric panel, I tripped and reset all the GFCI’s. BINGO! Washer power up, laundry in progress. After the July 4th holiday, I will call a licensed electrician to check the panel and install new GFCIs as needed. The washer was built in Canada about 2006, so replacement is likely. REMOVAL will be difficult, but can now be planned. Thank you YOUTube!❤😊

  • @win.exe0
    @win.exe02 күн бұрын

    @@neilsherman2680diagnostic lights blinks but it’s stuck at 0. When I press start a couple of times, water fills in slowly but then I soon get LE error, what could be the issue. It’s 8yrs old washer.

  • @hunterred5664
    @hunterred5664Ай бұрын

    This is great information no doubt @baraban916 . The problem is now, there is no manual inside the cabinet, I pulled the top and back open, and I cannot find a single mention of a service manual of any kind anywhere. AND no error codes show. Any hope in finding out what each of the few "modes" of diagnostic are? Someone mentioned up to 14, which there was not even close to that when I hit the start mode to cycle the was stages. Whatever stages two and three are do not move and register a "0" (zero). Cycle 1 spins fine, the rest either do nothing and barely make a noise or, like when the washer is turned on normally for a wash, it buzzes like it is going to start but does nothing but buzz. Any help would be greatly appreciated, no close laundromats - plus why would I want to pay that when I have the machines?

  • @johnsadventures6783
    @johnsadventures6783Ай бұрын

    Would be a better video if you told what you were doing. Fail

  • @admcstabby
    @admcstabbyАй бұрын

    For anyone who can't figure out what he's doing: Turn the dishwasher off Press the power button simultaneously with the L and R Booster buttons. If you don't see the Time Left screen show all icons (like in video) Power down and try again Press the Auto button Press Start Shut door You're welcome.

  • @Webrider357
    @Webrider357Ай бұрын

    mine has a deep fill button below the 3 you press to put it into diag mode, and it won't go into diag mode using the 3 buttons you used.

  • @__WJK__
    @__WJK__Ай бұрын

    It's the same 3 buttons for both models. The procedure is finicky/requires precise input, so keep trying. btw, the procedure won't work unless the washer/control panel is OFF. If you've tried a bunch of times & still can't get it, unplug the washer for a few hours/overnight & try again. If diagnostics won't work after that, the panel (or the PC board under the panel) might be bad(?)

  • @likeamachine
    @likeamachineАй бұрын

    I have the same dishwasher. I am putting it in diagnostic mode and it runs for 10seconds and gives me a C1 error code. No where in the repair manual states any C1 error code. I contacted samsung and they said its the Temperature sensor that is faulty. So I checked the resistance of the thermistor with the chart in the book and it corresponds precisely to the chart. So the thermistor is not defective. Whats happening is that the lower dishes do not get cleaned. When i bought it used, the filters at the bottom where clogged and dirty. After cleaning it washed much better but still the bottom didnt clean. only 1 time the bottom dishes got cleaned properly. I wanted to test the waterwall if its working properly in the diagnostics, but I cant get passed the C1 error code. Its getting frustrating.

  • @GregB6193
    @GregB6193Ай бұрын

    Did you ever get anywhere with this ? For me I just bought a home with this dishwasher and it would beep 3 times . I run diagnostics and I get C1.

  • @likeamachine
    @likeamachine29 күн бұрын

    @@GregB6193 I ordered a new control board just to test if it would fix it. My machine works fine now but will test with new control board when i get it to see if COde C1 is still there. Will let you know

  • @GregB6193
    @GregB619328 күн бұрын

    @@likeamachine please let me know if it works I considered it but if it doesn’t work for you . I think it’s time to get a different brand unit .

  • @likeamachine
    @likeamachine28 күн бұрын

    @@GregB6193 So I changed the Main PBA Board this morning and my original Code :C1 is gone, but a new code is now appearing (1E or E1). I then put the machine in Service Inspection Mode by pressing AUTO-DELICATE-POWER at the same time for 2sec. I chose option n2 to test the circulation pump. It tested the circulation pump, but I heard the pump was a bit noisy imo and gave me error 7E. Then I started a normal wash cycle with some dished in it and after 6 min, the machine stopped and gave me an error code 7E. Code 7E: Motor gear is out of order or Sensor Vane is out of order or Vane is blocked. (Sated in the repair Manual) But Google is saying code 7E is the Waterwall is jammed and cannot move. THAT is what the main issue was in the beginning. the bottom dishes weren't getting cleaned. But sometimes they were. Maybe the "Motor gear" that is stated in the manual is the waterwall motor. Probably is. I will take the waterwall motor out and test it on the bench. Most probably that is the main issue from the beginning and also the Main board got fried. i will post my findings here asap. @GregB6193 Update: So I took apart the Waterwall Motor and tested the resistance, and the motor had open circuit. No resistance. So I just ordered part number: DD31-00013B on ebay ( www.ebay.com/itm/313849967243 ) i also took apart the circulation pump motor, disassembled it and saw sooo much sand residue in there. Cleaned it all and reinstalled it.

  • @likeamachine
    @likeamachine9 күн бұрын

    Update Aug 7 2024: I changed the waterwall motor and now Dishwasher washes amazing. parts changed in this: Control Board, Waterwall Motor, Cleaned circulation pump. I did a self test again and still getting E1 Error. I might put back the old board to see if I get different results. The board I bought from ebay was used, so i cannot know if it already had error in it.

  • @jamieblair1830
    @jamieblair1830Ай бұрын

    You are awesome ty for that worked perfectly.

  • @jessecohen974
    @jessecohen974Ай бұрын

    Hey, just a heads up, while my icemaker did cycle with this code. It did not solve the problem then when the GE repair guy came, he said it erased all of the error codes so we couldn’t see any of the history of what was going wrong with my refrigerator. So he replaced the main board. Said if that doesn’t fix it, they’re a number of other things he could replace. He said I would’ve been better off if there were more error codes that could point directly to what the problem was.

  • @deitrerikala6466
    @deitrerikala6466Ай бұрын

    How to fix it. What do codes mean?

  • @jaycole3768
    @jaycole3768Ай бұрын

    I have one of these and it keeps repeating the rise cycle. What can be wrong?

  • @DylanFahey
    @DylanFaheyАй бұрын

    I did not know my amana had a filter at the bottom. Cleaned it all up. Did the 3 button repeat...and no error codes. Running a test cycle with some citric acid to freshen up the inside.

  • @mariyamazaryahu4552
    @mariyamazaryahu4552Ай бұрын

    How do you clear the codes on the WTW7000DW4? The manual is not helpful. I'm getting error code F0 E5 and the problem is fixed.

  • @johnfindlay5743
    @johnfindlay5743Ай бұрын

    What the F are you doing

  • @DawnHoweth1964
    @DawnHoweth19642 ай бұрын

    Thank you! The manual was telling me to push the wrong buttons

  • @andrestinoco8922
    @andrestinoco89222 ай бұрын

    I have a problem with minw. Saying drn

  • @dennisgray7509
    @dennisgray75092 ай бұрын

    Mine won’t go into diagnostics mode

  • @KellyBell1
    @KellyBell12 ай бұрын

    I don’t even understand what he is doing after he does the initial pushing buttons to put it in to diagnostic mode……it starts giving codes at the right side…..then he keeps pushing the pause button repeatedly???🤷🏻‍♀️🤷🏻‍♀️ So when did it actually give him the Error Code? Then it starts adding water into machine? This didn’t really tell much of anything. 🥴

  • @ArnulfoAstudillo
    @ArnulfoAstudillo2 ай бұрын

    It will be a better Video with out the back ground noice.

  • @stazieward
    @stazieward2 ай бұрын

    How do you remove the second door which is a drawer of the Samsung RF 4289 HARS

  • @chris76-01
    @chris76-012 ай бұрын

    Where can I get that service manual?

  • @spcg04
    @spcg0419 күн бұрын

    Did you find one?

  • @chris76-01
    @chris76-0119 күн бұрын

    @@spcg04 no, just replaced the machine

  • @anthonynavarro4243
    @anthonynavarro42432 ай бұрын

    Hello, please, I need your service. Know how to thank you. How can I contact you?

  • @joeymartinez-gd6se
    @joeymartinez-gd6se2 ай бұрын

    What 2 buttons? Flash light in the weigh

  • @joeymartinez-gd6se
    @joeymartinez-gd6se2 ай бұрын

    Would be a good video if u had spoke and said what u where doing and explain each cycle smh