@@troyherring7990 I need to take it back out to the range again, but on my first trip with it, it was shooting a little high and to the left
@FabianStrategy-762 күн бұрын
For those who are extra curious about the price... IIRC the "corrected" sale price was around $1400 or $1450 which is already a good deal on it's own. I ended up paying a few hundred less than that, with no tax and free shipping. 😁
@frankmorris479016 күн бұрын
'FIVE BEANS IN THE WHEEL." is a thing, I schiff you not...
@EricFullwood25 күн бұрын
Ostentatious was a brilliant choice of words
@azarmsandoutdoors26 күн бұрын
Great pistol 🔫
@BakersfieldLegend28 күн бұрын
Im getting it to hunt deer.
@TheLoneRanger745Ай бұрын
Taurus did a nice job on this Colt 1873 model P , BUT i think I'd rather get the Uberti through Cimmeron made in Italy by Craftsman the original way with fire case hardening and hot salt bluing and walnut stocks like the Cattleman ll , They are Stunning Beautiful reproductions.
@S3eed1989Ай бұрын
Great purchase. I hope I can get one at a reasonable price. Currently, the exclusive supplier in my country sells it for around $4200. There will be a gun show in September, and hopefully, I will get it there. Just curious, are there any differences between this one and the orange O R? If so, which one do you recommend to get for competitions mainly?
@FabianStrategy-76Ай бұрын
The orange is supposed to be a slight upgrade, but I'm not sure exactly what they do to it. Something with the recoil spring bushing and a slightly more polished trigger, I think. Honestly, either will be perfectly fine for competition. Get whichever one you prefer, or can afford. I went with the blue because it was cheaper, and I like the blue grips better than the orange 😆
@FabianStrategy-76Ай бұрын
This might help. kzread.info/dash/bejne/qKl21Zh6dbCbobg.htmlsi=FP9QBLUQnCxAJo6T
@S3eed1989Ай бұрын
@FabianStrategy-76 yeah me too I like the blue more.
@kogasoldier9379Ай бұрын
This, a staccato, and the legion are my dream guns.
@FabianStrategy-76Ай бұрын
Check out this test of an extended firing pin vs the factory firing pin: kzread.infoZPhYVYy9nJ8?si=SiKvsUp-JuHqlQnn
@jw8567Ай бұрын
Thanks, for the info I bought the da/sa without the cut.
@grapenut9Ай бұрын
Nice finish and excellent tolerance and fit on the cylinder. If it is made in Brazil, it is more likely to have been made on the old Smith & Wesson machinery that Taurus purchased, years ago. It is a very well built revolver, at least the one that I handled at my local gs.
@grinreaper2774Ай бұрын
Thats around uberti price
@FabianStrategy-76Ай бұрын
Depending on the model, yeah. Around there.
@user-bd5xl7lx4yАй бұрын
If you a baldwin it may go off
@FabianStrategy-76Ай бұрын
Lucky for me I'm not 😄
@user-rx7df6sr1xАй бұрын
It is a gaucho made a long time ago but stupid Americans couldn’t pronounce Gaucho so they remade it and called it the deputy. I have two Gauchos and love them. BUT IT IS NOT NEW.
@johnblood3731Ай бұрын
Unboxings are so overrated
@mokgable2 ай бұрын
I def wanna see it at the range!
@ChargerusPrime2 ай бұрын
The real question for me is, will Colt SAA grips fit this revolver? I plan to get one with a 4 3/4 inch barrel. They only have the added "cowboy load" bullshit there to appease the anti gunner communists running our country right now. That and people nowadays are stupid enough to find a way to actually make that happen lmao. Ill be packing mine as a daily come winter when she can be concealed. Probably gonna have a shoulder rig rather than a belt as i daily a Smith and Wesson m&p9 m2.0 compact optics ready with a thumb safety and flat face trigger. Ill pack both in winter because i flippin can lol. This is Texas. In the winter, i usually wear my alpaca hair poncho if its dry and my saddle slicker if'n it ain't. This will just add to the western style i have now and in summer, I'll just be packing it open only if im out in the woods. 357 does a real number on hogs. Other than that, shes my glove box gun. You can NEVER have too many guns because evil can NEVER be dead enough.
@dannyo66992 ай бұрын
Taurus also owns Heritage Arms which makes the Rough Rider 22LR single action, and it's made in Bainbridge GA. Heritage started in 1992 and was bought by Taurus in 2012. Evidently they no longer make the larger caliber revolvers with Heritage, and are sticking with the 22LR/22WMR guns. I've always wanted to get a Ruger Blackhawk in 357, but this in 357 seems pretty interesting, and at half the price of the Blackhawk.
@chubs-rn9nq2 ай бұрын
The bullet got stuck like that because it just came out slightly and got caught on the inside of the loading gate, load with weapon angled down to avoid that
@kennorkus61502 ай бұрын
Never let hammer down from half cock position...it's causes premature wear on the internal parts and will leave drag marks on the cylinder.
@Eltoroblancosass2 ай бұрын
I love mine. I have 2 I picked up for cowboy action shooting.i use them in competitions. A little polish work and spring kits they make a decent race gun. I have looked everywhere for grips. Even the special addition big iron still has plastic grips just colored brown.
@4440pvc2 ай бұрын
What's with the little kind of hard rubber washer on the cylinder? I would think that would burn up after a few box's. I've owned several 1873s over the years and that washer is a first for me.
@slvrktman78242 ай бұрын
Nice video…eventually would like to get a 4 3;4” Deputy. You should get yourself a Heritage Rough Rider…they are really pretty nice, and for what they sell for on sale, it’s a no brainer. Don’t understand how they can sell such a nice revolver and make a profit. And, they are manufactured in the U.S.A.!
@mikemuhlbach29512 ай бұрын
I have two Heritage love both of them
@mikemuhlbach29513 ай бұрын
Silly question the screw that hols the ramrod in place is there a nut in the barrel? You would have to remove the ramrkd
@FabianStrategy-763 ай бұрын
I haven't taken it apart to see so I'm not really sure, but as far as I know it just screws directly into the outside of the barrel to some degree. The inside is fully rifled.
@mikemuhlbach29512 ай бұрын
@@FabianStrategy-76 thx
@mikemuhlbach29513 ай бұрын
Good video. Thanks. Reminds me of.my 1873 Pietta Gunfighters.
@mikemuhlbach29513 ай бұрын
I wish the price was better
@FabianStrategy-763 ай бұрын
I mean, it's like half the price of a Vaquero and cheaper than a Uberti 🤷 thanks for watching!
@mikemuhlbach29512 ай бұрын
@FabianStrategy-76 true but not as affordable as my Piettas
@rezlogan47873 ай бұрын
The Safety Brigade get really out of hand on single action revolvers in particular. I’ve carried a 6 loaded cap and ball replica with the hammer resting between caps for years. On one I didn’t like, I’ve even loaded caps over empty chambers and drop tested it before scrapping it for parts. It did end up with the hammer resting on a cap a couple times. One drop even sheared off a safety pin, but it never set one off, even dropped above head height onto carpeted concrete floors. Since that test, I take my chances and load 6.
@TightwadTodd3 ай бұрын
For Taurus to recommend the empty chamber, for carry when it is designed with a safety notch and transfer bar is an oxymoron and proves that companies are prone to advise for their liability rather than common sense safety for the customer.
@TheDogGeneral2 ай бұрын
It's because it's a legacy design and Taurus didn't invent it they have copied it utilize the technical data packet but you know it's basically a cover your ass liability provision that their executives are just trying to make sure that there's no way someone can say in a oxymoron capacity oh they were being Reckless but factual
Пікірлер
How good does it how Accurate is it
@@troyherring7990 I need to take it back out to the range again, but on my first trip with it, it was shooting a little high and to the left
For those who are extra curious about the price... IIRC the "corrected" sale price was around $1400 or $1450 which is already a good deal on it's own. I ended up paying a few hundred less than that, with no tax and free shipping. 😁
'FIVE BEANS IN THE WHEEL." is a thing, I schiff you not...
Ostentatious was a brilliant choice of words
Great pistol 🔫
Im getting it to hunt deer.
Taurus did a nice job on this Colt 1873 model P , BUT i think I'd rather get the Uberti through Cimmeron made in Italy by Craftsman the original way with fire case hardening and hot salt bluing and walnut stocks like the Cattleman ll , They are Stunning Beautiful reproductions.
Great purchase. I hope I can get one at a reasonable price. Currently, the exclusive supplier in my country sells it for around $4200. There will be a gun show in September, and hopefully, I will get it there. Just curious, are there any differences between this one and the orange O R? If so, which one do you recommend to get for competitions mainly?
The orange is supposed to be a slight upgrade, but I'm not sure exactly what they do to it. Something with the recoil spring bushing and a slightly more polished trigger, I think. Honestly, either will be perfectly fine for competition. Get whichever one you prefer, or can afford. I went with the blue because it was cheaper, and I like the blue grips better than the orange 😆
This might help. kzread.info/dash/bejne/qKl21Zh6dbCbobg.htmlsi=FP9QBLUQnCxAJo6T
@FabianStrategy-76 yeah me too I like the blue more.
This, a staccato, and the legion are my dream guns.
Check out this test of an extended firing pin vs the factory firing pin: kzread.infoZPhYVYy9nJ8?si=SiKvsUp-JuHqlQnn
Thanks, for the info I bought the da/sa without the cut.
Nice finish and excellent tolerance and fit on the cylinder. If it is made in Brazil, it is more likely to have been made on the old Smith & Wesson machinery that Taurus purchased, years ago. It is a very well built revolver, at least the one that I handled at my local gs.
Thats around uberti price
Depending on the model, yeah. Around there.
If you a baldwin it may go off
Lucky for me I'm not 😄
It is a gaucho made a long time ago but stupid Americans couldn’t pronounce Gaucho so they remade it and called it the deputy. I have two Gauchos and love them. BUT IT IS NOT NEW.
Unboxings are so overrated
I def wanna see it at the range!
The real question for me is, will Colt SAA grips fit this revolver? I plan to get one with a 4 3/4 inch barrel. They only have the added "cowboy load" bullshit there to appease the anti gunner communists running our country right now. That and people nowadays are stupid enough to find a way to actually make that happen lmao. Ill be packing mine as a daily come winter when she can be concealed. Probably gonna have a shoulder rig rather than a belt as i daily a Smith and Wesson m&p9 m2.0 compact optics ready with a thumb safety and flat face trigger. Ill pack both in winter because i flippin can lol. This is Texas. In the winter, i usually wear my alpaca hair poncho if its dry and my saddle slicker if'n it ain't. This will just add to the western style i have now and in summer, I'll just be packing it open only if im out in the woods. 357 does a real number on hogs. Other than that, shes my glove box gun. You can NEVER have too many guns because evil can NEVER be dead enough.
Taurus also owns Heritage Arms which makes the Rough Rider 22LR single action, and it's made in Bainbridge GA. Heritage started in 1992 and was bought by Taurus in 2012. Evidently they no longer make the larger caliber revolvers with Heritage, and are sticking with the 22LR/22WMR guns. I've always wanted to get a Ruger Blackhawk in 357, but this in 357 seems pretty interesting, and at half the price of the Blackhawk.
The bullet got stuck like that because it just came out slightly and got caught on the inside of the loading gate, load with weapon angled down to avoid that
Never let hammer down from half cock position...it's causes premature wear on the internal parts and will leave drag marks on the cylinder.
I love mine. I have 2 I picked up for cowboy action shooting.i use them in competitions. A little polish work and spring kits they make a decent race gun. I have looked everywhere for grips. Even the special addition big iron still has plastic grips just colored brown.
What's with the little kind of hard rubber washer on the cylinder? I would think that would burn up after a few box's. I've owned several 1873s over the years and that washer is a first for me.
Nice video…eventually would like to get a 4 3;4” Deputy. You should get yourself a Heritage Rough Rider…they are really pretty nice, and for what they sell for on sale, it’s a no brainer. Don’t understand how they can sell such a nice revolver and make a profit. And, they are manufactured in the U.S.A.!
I have two Heritage love both of them
Silly question the screw that hols the ramrod in place is there a nut in the barrel? You would have to remove the ramrkd
I haven't taken it apart to see so I'm not really sure, but as far as I know it just screws directly into the outside of the barrel to some degree. The inside is fully rifled.
@@FabianStrategy-76 thx
Good video. Thanks. Reminds me of.my 1873 Pietta Gunfighters.
I wish the price was better
I mean, it's like half the price of a Vaquero and cheaper than a Uberti 🤷 thanks for watching!
@FabianStrategy-76 true but not as affordable as my Piettas
The Safety Brigade get really out of hand on single action revolvers in particular. I’ve carried a 6 loaded cap and ball replica with the hammer resting between caps for years. On one I didn’t like, I’ve even loaded caps over empty chambers and drop tested it before scrapping it for parts. It did end up with the hammer resting on a cap a couple times. One drop even sheared off a safety pin, but it never set one off, even dropped above head height onto carpeted concrete floors. Since that test, I take my chances and load 6.
For Taurus to recommend the empty chamber, for carry when it is designed with a safety notch and transfer bar is an oxymoron and proves that companies are prone to advise for their liability rather than common sense safety for the customer.
It's because it's a legacy design and Taurus didn't invent it they have copied it utilize the technical data packet but you know it's basically a cover your ass liability provision that their executives are just trying to make sure that there's no way someone can say in a oxymoron capacity oh they were being Reckless but factual