ils360 is all about having fun restoring vehicles, doing small engine repairs, unique how-to's, and many more, all while trying to help you save time and money.
Ever added anything to oil before draining, like diesel or kerosene and running it for a minute or so?
@baba.sattva7 күн бұрын
Thank you for posting this video. I was able to repair my generator. The small spring and tab portion around the 20 min mark saved me! Thank you!
@ils3607 күн бұрын
@@baba.sattva You're very welcome :-) I'm glad I was able to help That's why I love making videos is to help people out thank you for leaving your kind comment
@js00098 күн бұрын
Nice and my ruud is actually having its first actual part failure in almost 33 years fan cap and possibly condenser fan motor
@ils3608 күн бұрын
@@js0009 hey 33 years is a great run!!
@js00098 күн бұрын
@@ils360 yeah definitely for only refrigerant being the only issue up to now
@js00095 күн бұрын
@@ils360 condenser fan motor is failing after almost 33 years but the fan cap is still spot on after 32y 11m
@ils3605 күн бұрын
@@js0009 wow 🤯
@brich29298 күн бұрын
What size are the new front tires
@ils3608 күн бұрын
22.5x10.00-8
@brich29297 күн бұрын
@@ils360 thx
@ils3607 күн бұрын
@@brich2929 no problem 👍
@brich292910 күн бұрын
Any update on this? I just bought one and I can't find a direct replacement hour meter so far.
@outersketcher13 күн бұрын
How long do you burn it? How do you know when its done?
@ils36013 күн бұрын
@@outersketcher You burn it until it stop smoking once it stops smoking you know it's done. Just make sure that your muffler is steel or stainless steel if it's aluminum or made out of a composite material you don't want to burn it
@outersketcher12 күн бұрын
@@ils360 thank you. I’m gonna try it on my poulan p4500 trimmer muffler this weekend.
@user-ez7db8rk4o14 күн бұрын
THANK YOU KENNY!! I was just looking for information to help my fiend overseas he had problem with the full pump . I’m here in USA . Take some Eucalyptus tea at least once a day and shall help , if can find the leaves from the grocery store Att: hope
@eligiblesam565416 күн бұрын
Great vid
@ils36016 күн бұрын
@@eligiblesam5654 thank you :-)
@daver68116 күн бұрын
no offence but this is a pretty bad video because it was usually always too close up or out of focus
@ils36016 күн бұрын
@@daver681 look at the year that it was filmed there wasn't very good cameras back then though I could make another video for you if you would like.
@2ndMomentumGarage17 күн бұрын
What would the CFM ratings be on this?
@ils36017 күн бұрын
@@2ndMomentumGarage I'm not sure honestly
@ronskeeters431920 күн бұрын
Have you by chance found an actual service manual for one of these?
@ils36020 күн бұрын
@@ronskeeters4319 I haven't unfortunately.. what info are you looking for?
@ronskeeters431920 күн бұрын
@@ils360 I have the Cub Cadet Big Country version of this. I bought the machine (the engine was supposedly rebuilt) It idles okay and was running fair but has since lost power. I'm not sure if it is fuel/carb related or clutch/ belt related
@ils36020 күн бұрын
@@ronskeeters4319 what are the symptoms? One of the ways to test if it's carburetor related is to slowly pull the choke out and see if the problem gets better if it starts to gain power and run better with the choke and pulled it then it's a carburetor issue
@ronskeeters431919 күн бұрын
@@ils360 Thank you for the info, I will certainly try that. I don't have to explain to you these are "slow lumbering" machines anyway. It seems as it should be going to higher rpm's to not only fall on its face but to decline in power as well. That make sense??
@ils36019 күн бұрын
@@ronskeeters4319 yeah that does make sense It sounds like a carburetor issue there are different sections of the carburetor One is for idling the engine and the other one is for accelerating (simple explanation) And if one or the other gets plugged it will either idle great and not take off or only run while under load and won't idle I would definitely try pulling the choke while you're driving and see if that changes it if it does then the carburetor will need to be cleaned out. There's a possibility of a plugged fuel filter or failing fuel pump as well but I bet you it's the carburetor
@johangrannas483721 күн бұрын
I found this video one day too late.. but i still watched it to make sure i didnt miss anything. I got a tip from an old mechanic that id like to add here: Before cracking it up, run it in a ultrasonic cleaner at 70'c for a couple of hours. This makes the gaskets come loose easier. This video works just as good for a yamaha grizzly 350 2007. Also behind the cap you didnt open there is a springpressured steelball that can get clogged. This prevents the atv from backfiring when you turn it off. Thumbs up..
@audreyo502722 күн бұрын
Wait, this channel is still alive after 15 years? Also enjoy your break
@ils36022 күн бұрын
Surprisingly so yes the channel is still alive and I'm still posting videos. 😁 Thank you
@sansmondemond199423 күн бұрын
Malheureusement on ne voit pas comment il fait
@scotw6725 күн бұрын
I need a new pump for my pressure washer and am looking at the Yamatic. All still good with yours? Great video.
@ils36025 күн бұрын
@@scotw67 yeah 👍 All is still good with mine, it works great!
@dancollins254625 күн бұрын
How did you end up liking the carb? Im looking for a decent carb for the 51
@ils36025 күн бұрын
@@dancollins2546 The carburetor ended up working out great you can see in the video that it doesn't start but that was due to a scored up cylinder I didn't know about. After I put a new cylinder on it I tuned that carburetor and it works great no issues Just make sure you run ethanol free fuel through diaphragm carburetors The ethanol will eat them.
@dancollins254625 күн бұрын
@@ils360 thank you! I think il get one
@sNorENaDo77725 күн бұрын
Dude laughs like Butthead and these idiots are the reason for Americans being evacuated constantly from Wildfires
@larrycassidy1702Ай бұрын
Great video
@ils360Ай бұрын
Thank you 😊
@rubuk2996Ай бұрын
Thanks for the video! I am doing shocks on my 4runner and ran into the same issue you had with the front lower bracket being barely too narrow to fit the new shock. You gave me the confidence to just bend it out barely yo get them to fit.
@BruskollАй бұрын
Great video. But how did you put the pucks in?
@ils360Ай бұрын
I unhook the shocks and lifted the body up off of the axle It actually gives enough room to pull the springs out without having to compress them. If you're not able to do that though I'm sure you could jack up the rear end as high as you can put it on jack stands take the tires off and see if that gives you enough room that way
@BruskollАй бұрын
@@ils360 is your van alive yet? I just saw the transmission went out…
@ils360Ай бұрын
@@Bruskoll yeah I made an update video on the transmission issue I think the video is called transmission can we fix it or something like that It ended up being a clogged filter after doing a service on it that came back to life and has been great ever since though now I'm starting to have issues getting it past local emissions I think the cheap catalytic converter it's not working out.
@BruskollАй бұрын
@@ils360 I’m currently loosing power on my 87 4x4. It losses RMPs and the check engine light flashing on when it happens. My gas gauge on the dash is not accurate. Hopefully when I replace the fuel pump It will fix the lose in power and now stalling. The battery, spark plugs boots and distributor are new. Currently rewatching your video of the injector replacement.
@ils360Ай бұрын
@@Bruskoll have you tried checking your codes yet? All you have to do is stick a wire in a specific plug underneath the seat I've actually got a switch plumbed into mine just in case a light comes up while I'm driving... Definitely not checking them while driving 😉 It could also be a throttle position sensor or your mass vein sensor or whatever it's called I can't remember does your problem happen all the time or just once in awhile?
@AAa-qd8hbАй бұрын
Will (Toro part number 144-6377 traction assist handle kit) (for new Toro Time Master mowers) fit on new Toro AWD 21472 mower? Both have same mounting holes and baby carriage shape.
@richardmorse5307Ай бұрын
I learned a lot from your video. Perfect pace and explanations. Sure wanted to clean off that grime. Really good tips on revitalizing the start pull cord. Thanks!
@ils360Ай бұрын
Thank you so much for your kind comment I really appreciate it and I'm glad I was here to help!
@binht4931Ай бұрын
I got a 1985 with similar free play in my steering wheel. There a contact to get the same part u got?
@magicone9327Ай бұрын
Use Maguires ultra shine when done. It will make the paint and plastic look brand new!
@magicone9327Ай бұрын
That white oblong device in the carb fuel well should simply be pulled out if it’s socket, then cleaned! Easy peasy!
@magicone9327Ай бұрын
They are both MM, 5/16 will fit 8mm
@nunie92Ай бұрын
When installing the new the bell crank back into the bracket is there a special process since you had to use a press to remove it? I’m curious because I’m doing the same process and I’m going to send it in as well !
@ils360Ай бұрын
Nope No special process of putting it back on Just put it in place and torque it down. Make sure to keep on the company to get the part back It took them far too long to get mine done but they're the only place to get it done.
@robstone8397Ай бұрын
Whats the name.of the exhaust I need one
@ils360Ай бұрын
I'm not sure honestly I'm sorry
@CrazyBritishbitch33Ай бұрын
من فقط تمام خانه ام را آتش زدم و سپس مبلغ بیمه را دریافت کردم.
@CrazyBritishbitch33Ай бұрын
Je pensais que tu étais peut-être mort mon pote, est-ce que tu parles encore à Wheely132 et 1972fordf150 ces jours-ci ?
@FuskyTheHusky81Ай бұрын
Gotta love the good old youtube videos! I swear by running 32:1 and have never seen a seized motor or fouled plug. And run 12:1 in my old af lawnboy that says 16:1 lol they love it! Probably also helps they get a seafoam treatment every year.
@ils360Ай бұрын
Thank you :-) I'm glad you enjoy the old KZread videos thankfully they are still here and still helping people out with things. I also swear by using 32:1 there are a few newer things that I will run 40:1 but nothing lighter than that. Thank you for leaving a comment I really appreciate it
@MousetrapAndPepperАй бұрын
just like the video about the wind mill "its funny how the persons avatar is a picture of the same event like its a mamorial or something"
@ils360Ай бұрын
Yep it is my avatar that was actually done by KZread back in the day when avatars became a thing they picked your most popular video at the time and used a screenshot of it. I wonder if it's the same story for the person with the windmill. And yes all these years later I still read my comments and still comment back whenever I'm able 😁
@MousetrapAndPepperАй бұрын
Oh i never knew about that, I haven't been on yt back then so ye
@AlessioC-ft5ztАй бұрын
😢😢😢😢😢😢
@shaunaromine3709Ай бұрын
Help. The placement of this spark plug really is horrible. I dropped it inside while putting the new one in. There is no space for your hands in there. What can I do? I heard it go down, but I can't see or reach anything
@ils360Ай бұрын
Oh shoot! You know what I remember doing the same thing and if I remember right I fished it out with a magnet on the end of a wire or one of those mechanic extendable magnet things.
@shaunaromine3709Ай бұрын
I actually think it went under the fan....ugh. Not sure if it's worth the fix. You're video is great though.
@thee_crocodile3270Ай бұрын
Strong material thick material strong engine its was made for life never loose such a great mower
@doesdoeselaar1360Ай бұрын
Nice video. I have found 1 in a scrapyard. But looks like the engine of generator is stuck. Do you have some documentation for repairs??
@ils360Ай бұрын
After doing the repair I found some documentation on the engine side of it. I've got a PDF of it somewhere. Best thing you can do is open up all the spark plug holes and put a mixture of diesel and marvel mystery oil down there before you start anything I'll let it soak for a week or two
@roadhousedelorean26302 ай бұрын
Just the video I was needing to see. I just bought a 24ft 5th wheel camper. Only had the floor left on it. I removed that but was wondering how to Put the wood down. The angle iron sides made the light bulb turn on.
@ils3602 ай бұрын
I'm glad I was able to help :-) I've done a couple trailer conversions now and honestly enjoy doing them I am going to come out with more of this series hopefully soon finishing up the lighting the electric brakes and building drive over fenders from scratch.
@roadhousedelorean26302 ай бұрын
@@ils360 that’s exactly what I’m doing with this one. The drive over fenders. I plan on hauling my sxs and xj on it.
@ils3602 ай бұрын
@@roadhousedelorean2630 Nice!! Will you be posting any videos on it?
@mattmiller52152 ай бұрын
In a pinch ive used window washer fluid, but it will freeze in really cold conditions
@ils3602 ай бұрын
That's a great idea. I know they make a winter formula that will go down to -30 that's not a bad idea at all!
@Im_gone_if_this_cloud_appears2 ай бұрын
New idea see if you can create a dust devil with fans(mabey in circle), objects that can make some wind
@ils3602 ай бұрын
Hmmmm 🤔 intriguing idea I wonder if fans would have enough velocity or if you would have to use something like leaf blowers
@Im_gone_if_this_cloud_appears2 ай бұрын
@@ils360 well then test it in the video and see which one is the best
@Im_gone_if_this_cloud_appears2 ай бұрын
@@ils360 you don't want the wind to be too strong unless the fans are in a circular formation, you should also try it outside since I have never seen a video of someone creating a dust devil outside
@Im_gone_if_this_cloud_appears2 ай бұрын
It's your profile lol
@ils3602 ай бұрын
😄 and has been since 2008 I think Believe it or not KZread said it as that when profile pictures became a thing on KZread forever ago
@Im_gone_if_this_cloud_appears2 ай бұрын
@@ils360 Respect to you for reading my comment 14 years latter, so here's a sub😄
@ils3602 ай бұрын
@@Im_gone_if_this_cloud_appears thank you I appreciate the sub :-) I always try to write back to every message I see. And if I don't see it I blame it on KZread lol
@Im_gone_if_this_cloud_appears2 ай бұрын
@@ils360 btw I commented a video idea on your newest video
@ils3602 ай бұрын
@@Im_gone_if_this_cloud_appears I will have to go check thank you!
@Room1sixtyfive2 ай бұрын
That welding wire NR 211MP is not suitable for this especially since this should be considered structural welding, I would have used something like E71T (GS) or (11) if you wanted to do multi pass not that it was needed but it all depends on the strength you look gor your welds.
@jah_Bellandmsmandmibu2 ай бұрын
it turned to campfire
@MiniTruckin6152 ай бұрын
Hello friend, I just got a similar motorcycle but I have a question about the small line on the gas cap, where does it go?
@ils3602 ай бұрын
That is a vent hose there's normally a hole in the plastic near the steering column that it goes into it doesn't plug into anything. Just make sure you have one it helps keep rain and water out on the gas.
@georgia6732 ай бұрын
Satisfying
@shanganjenda85562 ай бұрын
Can i have a name for that paper that first scratch on the tube
@ils3602 ай бұрын
Sand paper
@shanganjenda85562 ай бұрын
@@ils360 thank you 🙏🏾
@ils3602 ай бұрын
@@shanganjenda8556 no problem 👍 happy to help
@jeffreyvienneau45262 ай бұрын
Mini craftsman tiller. I took the carborater off cleaned it but the screws won't screw back in. I would like a diagram how it goes back together. Thanks
@ils3602 ай бұрын
Oh I've never seen that issue before did you get the right screws back in the right holes?
@denniscoburn62512 ай бұрын
Good video! I wish I had your expertise! I have a 1988 van, electrical short. All systems working, turns over but won't start. Just put in a new computer, didn't help. Advertising it on Facebook Marketplace (atlanta) for $1,500. Hate to let it go!
@ils3602 ай бұрын
Does it have spark? Try spraying some starting fluid or carburetor cleaner in the intake and see if it fires. After you figure out whether you're missing spark or fuel it's pretty easy to figure out what it needs
@denniscoburn62512 ай бұрын
@@ils360 Thanks! I have spark and fuel. I can't seem to find the intake, although I took the large rubber hose off that goes to the breather, and sprayed some starting fluid in there, but don't think it actuall made it to the engine. I don't know if I can remove an injector and try going that way? I have my owners manual, but it doesn't show where the intake is. Maybe, the injectors are clogged, but don't know how to clean those either. I think I hit a big chuckhole, and maybe knocked some rust or debris loose from the gas tank, which clogged something up. Just a theory.
@ils3602 ай бұрын
@@denniscoburn6251 shut off after hitting a bump? Hmmm 🤔 I almost wonder if something didn't come unplugged. Do you share your fuel pump cycle when you turn the key on or turn it over? Hard to do I know have somebody turn it over with your ear near the open gas tank and see if you can hear a fuel pump.
@denniscoburn62512 ай бұрын
Thanks again for replying to me! I checked the fuel pump and it was working and definitely pumping fuel to the intake, but still no start. Anyway, I have dedided to give up. I think the injectors may be clogged or need to be replaced, or something else that's too complicated for me. So, I am going to sell it for the best offer on Facebook marketplace. Sad, but time to move on. Thanks!
@ils3602 ай бұрын
@@denniscoburn6251 no problem I love to help people. I do have a video how to clean the tank and replace injectors if you don't end up selling it. But I'm glad you got to experience one of these awesome vans! They are so fun! ☺️
@danielclassicwoodfloors2 ай бұрын
Great teaching video, by the time you finish, I finished and had two beers, Thanks👍
Пікірлер
Ever added anything to oil before draining, like diesel or kerosene and running it for a minute or so?
Thank you for posting this video. I was able to repair my generator. The small spring and tab portion around the 20 min mark saved me! Thank you!
@@baba.sattva You're very welcome :-) I'm glad I was able to help That's why I love making videos is to help people out thank you for leaving your kind comment
Nice and my ruud is actually having its first actual part failure in almost 33 years fan cap and possibly condenser fan motor
@@js0009 hey 33 years is a great run!!
@@ils360 yeah definitely for only refrigerant being the only issue up to now
@@ils360 condenser fan motor is failing after almost 33 years but the fan cap is still spot on after 32y 11m
@@js0009 wow 🤯
What size are the new front tires
22.5x10.00-8
@@ils360 thx
@@brich2929 no problem 👍
Any update on this? I just bought one and I can't find a direct replacement hour meter so far.
How long do you burn it? How do you know when its done?
@@outersketcher You burn it until it stop smoking once it stops smoking you know it's done. Just make sure that your muffler is steel or stainless steel if it's aluminum or made out of a composite material you don't want to burn it
@@ils360 thank you. I’m gonna try it on my poulan p4500 trimmer muffler this weekend.
THANK YOU KENNY!! I was just looking for information to help my fiend overseas he had problem with the full pump . I’m here in USA . Take some Eucalyptus tea at least once a day and shall help , if can find the leaves from the grocery store Att: hope
Great vid
@@eligiblesam5654 thank you :-)
no offence but this is a pretty bad video because it was usually always too close up or out of focus
@@daver681 look at the year that it was filmed there wasn't very good cameras back then though I could make another video for you if you would like.
What would the CFM ratings be on this?
@@2ndMomentumGarage I'm not sure honestly
Have you by chance found an actual service manual for one of these?
@@ronskeeters4319 I haven't unfortunately.. what info are you looking for?
@@ils360 I have the Cub Cadet Big Country version of this. I bought the machine (the engine was supposedly rebuilt) It idles okay and was running fair but has since lost power. I'm not sure if it is fuel/carb related or clutch/ belt related
@@ronskeeters4319 what are the symptoms? One of the ways to test if it's carburetor related is to slowly pull the choke out and see if the problem gets better if it starts to gain power and run better with the choke and pulled it then it's a carburetor issue
@@ils360 Thank you for the info, I will certainly try that. I don't have to explain to you these are "slow lumbering" machines anyway. It seems as it should be going to higher rpm's to not only fall on its face but to decline in power as well. That make sense??
@@ronskeeters4319 yeah that does make sense It sounds like a carburetor issue there are different sections of the carburetor One is for idling the engine and the other one is for accelerating (simple explanation) And if one or the other gets plugged it will either idle great and not take off or only run while under load and won't idle I would definitely try pulling the choke while you're driving and see if that changes it if it does then the carburetor will need to be cleaned out. There's a possibility of a plugged fuel filter or failing fuel pump as well but I bet you it's the carburetor
I found this video one day too late.. but i still watched it to make sure i didnt miss anything. I got a tip from an old mechanic that id like to add here: Before cracking it up, run it in a ultrasonic cleaner at 70'c for a couple of hours. This makes the gaskets come loose easier. This video works just as good for a yamaha grizzly 350 2007. Also behind the cap you didnt open there is a springpressured steelball that can get clogged. This prevents the atv from backfiring when you turn it off. Thumbs up..
Wait, this channel is still alive after 15 years? Also enjoy your break
Surprisingly so yes the channel is still alive and I'm still posting videos. 😁 Thank you
Malheureusement on ne voit pas comment il fait
I need a new pump for my pressure washer and am looking at the Yamatic. All still good with yours? Great video.
@@scotw67 yeah 👍 All is still good with mine, it works great!
How did you end up liking the carb? Im looking for a decent carb for the 51
@@dancollins2546 The carburetor ended up working out great you can see in the video that it doesn't start but that was due to a scored up cylinder I didn't know about. After I put a new cylinder on it I tuned that carburetor and it works great no issues Just make sure you run ethanol free fuel through diaphragm carburetors The ethanol will eat them.
@@ils360 thank you! I think il get one
Dude laughs like Butthead and these idiots are the reason for Americans being evacuated constantly from Wildfires
Great video
Thank you 😊
Thanks for the video! I am doing shocks on my 4runner and ran into the same issue you had with the front lower bracket being barely too narrow to fit the new shock. You gave me the confidence to just bend it out barely yo get them to fit.
Great video. But how did you put the pucks in?
I unhook the shocks and lifted the body up off of the axle It actually gives enough room to pull the springs out without having to compress them. If you're not able to do that though I'm sure you could jack up the rear end as high as you can put it on jack stands take the tires off and see if that gives you enough room that way
@@ils360 is your van alive yet? I just saw the transmission went out…
@@Bruskoll yeah I made an update video on the transmission issue I think the video is called transmission can we fix it or something like that It ended up being a clogged filter after doing a service on it that came back to life and has been great ever since though now I'm starting to have issues getting it past local emissions I think the cheap catalytic converter it's not working out.
@@ils360 I’m currently loosing power on my 87 4x4. It losses RMPs and the check engine light flashing on when it happens. My gas gauge on the dash is not accurate. Hopefully when I replace the fuel pump It will fix the lose in power and now stalling. The battery, spark plugs boots and distributor are new. Currently rewatching your video of the injector replacement.
@@Bruskoll have you tried checking your codes yet? All you have to do is stick a wire in a specific plug underneath the seat I've actually got a switch plumbed into mine just in case a light comes up while I'm driving... Definitely not checking them while driving 😉 It could also be a throttle position sensor or your mass vein sensor or whatever it's called I can't remember does your problem happen all the time or just once in awhile?
Will (Toro part number 144-6377 traction assist handle kit) (for new Toro Time Master mowers) fit on new Toro AWD 21472 mower? Both have same mounting holes and baby carriage shape.
I learned a lot from your video. Perfect pace and explanations. Sure wanted to clean off that grime. Really good tips on revitalizing the start pull cord. Thanks!
Thank you so much for your kind comment I really appreciate it and I'm glad I was here to help!
I got a 1985 with similar free play in my steering wheel. There a contact to get the same part u got?
Use Maguires ultra shine when done. It will make the paint and plastic look brand new!
That white oblong device in the carb fuel well should simply be pulled out if it’s socket, then cleaned! Easy peasy!
They are both MM, 5/16 will fit 8mm
When installing the new the bell crank back into the bracket is there a special process since you had to use a press to remove it? I’m curious because I’m doing the same process and I’m going to send it in as well !
Nope No special process of putting it back on Just put it in place and torque it down. Make sure to keep on the company to get the part back It took them far too long to get mine done but they're the only place to get it done.
Whats the name.of the exhaust I need one
I'm not sure honestly I'm sorry
من فقط تمام خانه ام را آتش زدم و سپس مبلغ بیمه را دریافت کردم.
Je pensais que tu étais peut-être mort mon pote, est-ce que tu parles encore à Wheely132 et 1972fordf150 ces jours-ci ?
Gotta love the good old youtube videos! I swear by running 32:1 and have never seen a seized motor or fouled plug. And run 12:1 in my old af lawnboy that says 16:1 lol they love it! Probably also helps they get a seafoam treatment every year.
Thank you :-) I'm glad you enjoy the old KZread videos thankfully they are still here and still helping people out with things. I also swear by using 32:1 there are a few newer things that I will run 40:1 but nothing lighter than that. Thank you for leaving a comment I really appreciate it
just like the video about the wind mill "its funny how the persons avatar is a picture of the same event like its a mamorial or something"
Yep it is my avatar that was actually done by KZread back in the day when avatars became a thing they picked your most popular video at the time and used a screenshot of it. I wonder if it's the same story for the person with the windmill. And yes all these years later I still read my comments and still comment back whenever I'm able 😁
Oh i never knew about that, I haven't been on yt back then so ye
😢😢😢😢😢😢
Help. The placement of this spark plug really is horrible. I dropped it inside while putting the new one in. There is no space for your hands in there. What can I do? I heard it go down, but I can't see or reach anything
Oh shoot! You know what I remember doing the same thing and if I remember right I fished it out with a magnet on the end of a wire or one of those mechanic extendable magnet things.
I actually think it went under the fan....ugh. Not sure if it's worth the fix. You're video is great though.
Strong material thick material strong engine its was made for life never loose such a great mower
Nice video. I have found 1 in a scrapyard. But looks like the engine of generator is stuck. Do you have some documentation for repairs??
After doing the repair I found some documentation on the engine side of it. I've got a PDF of it somewhere. Best thing you can do is open up all the spark plug holes and put a mixture of diesel and marvel mystery oil down there before you start anything I'll let it soak for a week or two
Just the video I was needing to see. I just bought a 24ft 5th wheel camper. Only had the floor left on it. I removed that but was wondering how to Put the wood down. The angle iron sides made the light bulb turn on.
I'm glad I was able to help :-) I've done a couple trailer conversions now and honestly enjoy doing them I am going to come out with more of this series hopefully soon finishing up the lighting the electric brakes and building drive over fenders from scratch.
@@ils360 that’s exactly what I’m doing with this one. The drive over fenders. I plan on hauling my sxs and xj on it.
@@roadhousedelorean2630 Nice!! Will you be posting any videos on it?
In a pinch ive used window washer fluid, but it will freeze in really cold conditions
That's a great idea. I know they make a winter formula that will go down to -30 that's not a bad idea at all!
New idea see if you can create a dust devil with fans(mabey in circle), objects that can make some wind
Hmmmm 🤔 intriguing idea I wonder if fans would have enough velocity or if you would have to use something like leaf blowers
@@ils360 well then test it in the video and see which one is the best
@@ils360 you don't want the wind to be too strong unless the fans are in a circular formation, you should also try it outside since I have never seen a video of someone creating a dust devil outside
It's your profile lol
😄 and has been since 2008 I think Believe it or not KZread said it as that when profile pictures became a thing on KZread forever ago
@@ils360 Respect to you for reading my comment 14 years latter, so here's a sub😄
@@Im_gone_if_this_cloud_appears thank you I appreciate the sub :-) I always try to write back to every message I see. And if I don't see it I blame it on KZread lol
@@ils360 btw I commented a video idea on your newest video
@@Im_gone_if_this_cloud_appears I will have to go check thank you!
That welding wire NR 211MP is not suitable for this especially since this should be considered structural welding, I would have used something like E71T (GS) or (11) if you wanted to do multi pass not that it was needed but it all depends on the strength you look gor your welds.
it turned to campfire
Hello friend, I just got a similar motorcycle but I have a question about the small line on the gas cap, where does it go?
That is a vent hose there's normally a hole in the plastic near the steering column that it goes into it doesn't plug into anything. Just make sure you have one it helps keep rain and water out on the gas.
Satisfying
Can i have a name for that paper that first scratch on the tube
Sand paper
@@ils360 thank you 🙏🏾
@@shanganjenda8556 no problem 👍 happy to help
Mini craftsman tiller. I took the carborater off cleaned it but the screws won't screw back in. I would like a diagram how it goes back together. Thanks
Oh I've never seen that issue before did you get the right screws back in the right holes?
Good video! I wish I had your expertise! I have a 1988 van, electrical short. All systems working, turns over but won't start. Just put in a new computer, didn't help. Advertising it on Facebook Marketplace (atlanta) for $1,500. Hate to let it go!
Does it have spark? Try spraying some starting fluid or carburetor cleaner in the intake and see if it fires. After you figure out whether you're missing spark or fuel it's pretty easy to figure out what it needs
@@ils360 Thanks! I have spark and fuel. I can't seem to find the intake, although I took the large rubber hose off that goes to the breather, and sprayed some starting fluid in there, but don't think it actuall made it to the engine. I don't know if I can remove an injector and try going that way? I have my owners manual, but it doesn't show where the intake is. Maybe, the injectors are clogged, but don't know how to clean those either. I think I hit a big chuckhole, and maybe knocked some rust or debris loose from the gas tank, which clogged something up. Just a theory.
@@denniscoburn6251 shut off after hitting a bump? Hmmm 🤔 I almost wonder if something didn't come unplugged. Do you share your fuel pump cycle when you turn the key on or turn it over? Hard to do I know have somebody turn it over with your ear near the open gas tank and see if you can hear a fuel pump.
Thanks again for replying to me! I checked the fuel pump and it was working and definitely pumping fuel to the intake, but still no start. Anyway, I have dedided to give up. I think the injectors may be clogged or need to be replaced, or something else that's too complicated for me. So, I am going to sell it for the best offer on Facebook marketplace. Sad, but time to move on. Thanks!
@@denniscoburn6251 no problem I love to help people. I do have a video how to clean the tank and replace injectors if you don't end up selling it. But I'm glad you got to experience one of these awesome vans! They are so fun! ☺️
Great teaching video, by the time you finish, I finished and had two beers, Thanks👍
Glad you enjoyed and I'm glad I could help 😁
I remember when u burned the tumbleweed,
😂 fun times
Yaaaas
Woooo