Infinite Realms is a fully interactive 2D and 3D tabletop projection app. It features customizable weather, effects, soundscapes, grids and fog of war. Enhance your existing image and video maps or download our new 3D scenarios!
I'm thinking of a square hole in the table and the monitor mounted under on a regular monitor arm so it can be raised up flush to the table surface, locked and played on. When not played on, lower the monitor a bit and put a sheet of wood over the hole.
@cisternАй бұрын
Infinite Realms. Always innovating and demonstrating how to best use their software. Great vid!
@olebroggerАй бұрын
Simple and easy to make, Just love it ❤
@djki25652 ай бұрын
Where did you find the animated maps ? Great job...❤
@infiniterealms84792 ай бұрын
All animated 3d maps are part of our own tabletop software. Check it out at infinite-realms.app/ It can also play video maps, image files and universal vtt maps.
@dokuheld47602 ай бұрын
Was mir fehlt ist das man als DM notizen schreiben kann auf der Map ohne das es die Spieler sehen
@boardgames30652 ай бұрын
What ceiling mount do you use?
@infiniterealms84792 ай бұрын
A cheap & simple model like this: www.amazon.com/-/de/dp/B099RYBN68?th=1
@colwyn783 ай бұрын
Is it possible to add anti-aliasing or something to smooth the edges of the 3d models? Because even in 4k rendering and highest quality level, it's too far of precise :( too bad... I have a radeon 6700 oc so I think it could run with AA. Thanks !
@infiniterealms84792 ай бұрын
Hi, we do use Antialiasing starting with the "Low Quality" setting at 2x MSAA up to "Very High Quality" at 8x MSAA. Please make sure you also use the 4K render resolution for maximum image quality.
@JorgeL7213 ай бұрын
What if the projector was under the table displaying on a semi translucent screen on the table?
@infiniterealms84793 ай бұрын
Technically this can be done, but in our opinion this has too many downsides. Distance from projector to surface is shorter so you get a smaller projection area. You would also have to cut a hole in your table and protect the projector from accidentally being kicked. It also would be cheaper to just build a TV into the table, which also gets you better image quality / brightness.
@Kanashii643 ай бұрын
Ich hatte die ersten paar Sekunden und dachte mir nur „DAS verstehe ich gut, dass ist der mir vertraute deutsche Akzent“ 😂😂 Aber super Video, genau das hatte ich gesucht, vielen dank!!
@Stabnsuch3 ай бұрын
Dollarstore White Posterboard - 2 pieces. DONE.
@Evanshion4 ай бұрын
Thanks a lot guys! I'm going to build one on next week!
@keithmiller67134 ай бұрын
This is a great idea, love the Swarmlord showing up!
@judethomas42144 ай бұрын
This isn't working at all for me. I created a scene using a legacy map. The app immediately recognized that I am using two screens and it displays the map on both screens. When I select the Fog of War tab and toggle on Fog of War, the map on my main screen dims a little, while the secondary screen goes completely blank. I can move my cursor over either screen and left click and right click and drag and nothing happens. I am running Windows 11 Home edition. I am not sure what IR version it is, because it does not show a version on launch, there is no version information in the settings, and no ReadMe file in the default directory. I downloaded the app from the IR site today.
@infiniterealms84794 ай бұрын
Hi, by default the "Movement & Token" tool will be active when you start a scene. To remove (and re-add) Fog of War the corresponding "Fog of War" tool has to be active. It is the cloud with eye symbol in the top tool row, you can also activate it with hotkey "2". Also the bottom menu has to be closed for the tool to be working (hotkey "Tab"). See infinite-realms.app/tutorials/tools/#fow
@judethomas42144 ай бұрын
@@infiniterealms8479 yep, that was the issue. It wasn't clear to me from the instructional video that I had to take the extra steps of closing the menu at the bottom of the screen and clicking the eye at the top after toggling on fog of war.
@adamferencz4604 ай бұрын
Amazing idea. I still recommend using plexi for the additional protetction and covering it with the foil to avoid.
@timbo49735 ай бұрын
Oh, that's nice 😊
@cistern5 ай бұрын
I enjoy these short simple tutorials. I sometimes forget some of the basics and this was a good reminder. Vielen Dank!
@infiniterealms84795 ай бұрын
Thanks for the feedback! This one was sorely needed in our minds as we did change the map setup workflow a lot in recent months. And a short video showing the app in action is almost always better than pointing to written tutorials.
@olebrogger5 ай бұрын
This is so cool. And i have a new table that is the right tool for it 🙂
@Taubrala5 ай бұрын
Hi, i started with an "old" TV and switched to an Beamer... this is why: 1) I dont wanted to cut out the table and so the tv was ontop of the table, 2) the viewing angle was not really well (color distortions) and 3) we had relections from the ceiling lamps. then i bought an cheap 1080p beamer from amazon for about 120€ (i checked that is it a really 1080p and no upscaling type). And we love it, 1) we have much more space on the table 2) the beamer is easy to turn on and off via remote. 3) Yes the colors are a little bit paler colors, but the viewing angle is for everyone equally good! (My big advantage is, that our gaming room is in the cellar (a "real man cave") and so we dont have a lot of sunlight there.) One point which is here not mentioned, and which I was worried about: a beamer is much louder than a TV, and this is why i turn it off, if it is not needed... for battles or other "loud" gameplay its totally fine. For an "silent" cave exploration it can be distracting. I was really lucky with the ceiling height in my basement (its really low), because between my table and the celling are only 1,45m and the beamer has no zoom, but the projected picture is exactly 43".... and thats perfect for us.
@infiniterealms84795 ай бұрын
Thanks for the comment, very interesting. We did not mention projector fan noise because it is no issue in our setup - we are using a Philips projector that is quite silent. But, depending on your hardware, fan noise can of course be distracting.
@Crits-Crafts6 ай бұрын
Ive got a large e-ink display hooked up to a raspberry pi to make paper like maps... Wish id seen your video first lol
@infiniterealms84796 ай бұрын
Never thought about using e-ink... interesting! 🤔
@Crits-Crafts6 ай бұрын
@@infiniterealms8479 it's an expensive option. $2500 for a 32" display. I just got lucky, my employer had an eink info board and the controller broke. So i asked if I could nab it lol
@evolvingguide6 ай бұрын
Where do you find pictures of Playground? Or are they also selfmade?
@tomekhekin9147 ай бұрын
Greate video. My only concern is that all my minis are magnetize and I am afraid to damage lcd panel with small but strong magnets. Do you have magnets ?
@infiniterealms84797 ай бұрын
This can can indeed be a problem. Depending on the electronics and strength of the magnetic field I would not rule out the possibility to cause permanent damage with magnets. We do not have magnets on our minis, but if we had we would strongly gravitate towards a projector setup.
@burlesonpirate7 ай бұрын
I want to buy your aoftware
@infiniterealms84797 ай бұрын
You can download the software from our website www.infinite-realms.app.
@SamIAm-kz4hg9 ай бұрын
Here's my table, and my thoughts on building and using it: kzread.info/dash/bejne/nqOM08GHYZOpqrA.html
@wonder92929 ай бұрын
What a great video. Making the decision to switch to both is hard for me. I recently purchased a lot of new battle maps and dont feel it necessary, but feel it would be a great way to enhance my game.
@MrFido7up9 ай бұрын
nice. i was using dungeon alchemist and export it as image. now i can get the lights to change them. will it also include animations from dungeon alchemist ?
@infiniterealms84799 ай бұрын
The Universal VTT file format sadly does not support videos / animations, so no auto generated virtual walls and lights on animated maps. We may be able to work out some format for this with other developers like the Dungeon Alchemist team in the future. For now the latest development release of Infinite Realms features setting manual walls and lights on vanilla image and video maps. This can be an alternative, but requires manual work...
@MrFido7up9 ай бұрын
@@infiniterealms8479 just interesting idea maybe a layer system could solve that issue ? Like we get animated map imported and separately we import the lights/walls from dungeon alchemist then infinite realms merge them or stack them top of each other
@infiniterealms84799 ай бұрын
Thanks for the feedback! We've been thinking along those lines as well. It would be nice to be able import uvtt Data for an "identical" animated map. We'll put this on the list for a future update.
@MrFido7up9 ай бұрын
i am excited. cant wait for the update :D. i thought you guys done with the software and wont add more features but am happy that this is not the case
@WooootSD9 ай бұрын
Why go with a projector, when you can just get a 40-55" TV and put it on the table? Best image, no reflections, no shadows.
@infiniterealms84799 ай бұрын
Good question! It really depends on the situation. Actually we use both solutions and made a comparison video a while back: kzread.info/dash/bejne/oaZ7ppKxpcrbiJc.html
@kylkim9311 ай бұрын
I would recommend taking advantage of the VESA holes during planning and final assembly, as they usually are on the same plane to each other and already have threads in them that can hold the weight of the TV - not necessarily on its back, but for lifting the TV out of the box, if the top is later covered by the acrylic. For the VESA holes, it's better to use threaded rod with a nut however, so as not to accidentally screw in a bolt too deep into the TV and break something - the maximum depth can usually be found in the TV's manual or parsed from the length of the VESA bolts provided. My current plan is to make a very short single leg stand that affixes to the VESA mount, so as to still have access to all that tablespace underneath the TV. Not sure how wobbly this might get, but I'm still prototyping.
@leonmonk11 ай бұрын
Great stuff, very excited for the future of IR :D gonna blow my players away with this stuff :)
@timd770911 ай бұрын
raise the tv on legs. This allows people to have books and dice underneath.
@infiniterealms847911 ай бұрын
We are working on a solution just like this right now! 👍
@LordBelakor11 ай бұрын
best german accent ever, you really have mastered it to speak as if you would speak word by word
@EliaMarc6 ай бұрын
Is this a thing with german accents? Like that it's more chopped up and not a flow of words?
@LordBelakor6 ай бұрын
@@EliaMarc that is the sterotypical cliché, but it is often correct, lots of germans can't speak in a flow of words in english, partly as they are translating their sentence adhoc from german to english while then also thinking about the change in grammar. The better the english capability gets the smaller the breaks get and it gets more flow. Up to a point where the german pronounciation starts to fade away also. But I love accents in general and love it when fellow germans speak with the typical.german.accent.with.no.flow.at.all.and.very.thick.german.pronounciation. A bit like Werner Herzog :D
@EliaMarc6 ай бұрын
@@LordBelakor Oh I also love Werner Herzogs accent. It's kind of funny that germans can recognize a german accent the most. Even if it's the most subtle accent, germans will flock to the comments and remind the creator that he is in fact german.
@olebrogger11 ай бұрын
awesome work! just love the product😀
@adrian583711 ай бұрын
*Promo SM*
@sjurursteinholm536811 ай бұрын
Nice to see a simple way to make maps :) I have a couple of friends that play catan with all of the expansions from time to time. I'm gonna try this out and make something nice
@sjurursteinholm536811 ай бұрын
This is so cool! I've been contemplating programming something similar only in a web browser, but this is way cooler. An idea for the future could be, using a kinect to make it possible to track the pieces on the board. Then you could add effects like spells, AoE and maybe even ownership of each piece having a player color.
@SanDiegoBass11 ай бұрын
What size of TV did you use?
@infiniterealms847911 ай бұрын
This one is 40“, we also use a projector sometimes that equals 49“ on the table.
@cistern Жыл бұрын
I'm very happy to see Infinite Realms continue its development cycle. Please keep up the good work.
@infiniterealms8479 Жыл бұрын
Will do! 😉
@grimmsteelgames Жыл бұрын
You had me at Blind Guaridan
@infiniterealms8479 Жыл бұрын
🤘🤘
@javieronate4932 Жыл бұрын
❤❤❤❤ Amazing ! I just took it Yesterday and i can't wait to explore the all potential of the application !
@owl6789 Жыл бұрын
I'm currently working on a flat screen tabletop table for my D&D Game. So far I've flat screen and the frame And the program, And all that's working fine. But now I'm considering building a wooden table around the flat screen t.v. wooden frame. And after the wooden table was built, actually I was considering a way to make it look like it's made of stone, but on a much bigger scale. So Jeremy, any Idea's? This episode really helped, it gave me a few Ideas. But what do u say?
@zackjensen6583 Жыл бұрын
Where do you get the battlemaps from I have the tv for it but can't seem to find legit battlemaps
@infiniterealms8479 Жыл бұрын
Check out Manny Sykes here on KZread. There is a download link for all his video maps in the channel description. Reddit is also a great place to find talented creators and (free) maps: www.reddit.com/r/battlemaps/
@jackmason9550 Жыл бұрын
Ive watched several videos of people who have built their own TV gaming table and it seems like once people have a frame built they run into the issue of getting the screen to be level inside of the frame and dealing with the fact that the back of the TV isnt flat and they always end up having to very carefuly make support pieces of various geometries to hold the TV level and support it at different places on the back of the TV. Wouldn't it be a million times easier to just run some thick, high quality velcro straps across the frame to cradle the TV in the box? The straps would be precisely adjustable and wouldn't care about the geometry of the back of the TV. It would be far easier to adjust each strap as needed than to cut all of the specific pieces of wood to support the TV at the correct height annd angle for each spot where a support is needed, wouldn't it? You could just place the frame upside-down, lay the TV into the frame screen-side down, then tighten the straps down around the back of the TV and then flip the whole thing over. The screen should be flush with the frame at that point I would think. Even if the TV settles a little bit, if you build it right and do the straps in asmart way, you should be able to adjust the straps as needed with the whole thing face up to raise or lower the screen as needed. In the direction the straps run, the TV should be level no matter what.
@infiniterealms8479 Жыл бұрын
Seems like a legit alternative! When placing the straps you would just have to take care to not block any ports and ventilation slots. On the other hand building the central support piece was no real issue. Even for total amateurs like us.
@extensiblelibrarian11 ай бұрын
I ended up using the foam packing blocks (slightly altered) on the top and bottom to fit snugly into the frame and allow the tv to be level. I also fastened it to the back with the vesa mounting screws.
@RfrSSWolf Жыл бұрын
Plz, Android & iPad App. Or Online Version Too
@infiniterealms8479 Жыл бұрын
We would love to. Sadly this will not be technically possible as several key features we use are only supported on the desktop version of the Unity engine.
@MrRogue1974 Жыл бұрын
Brilliant
@justjoe7678 Жыл бұрын
The handout feature looks great! I have to learn more about adding character & NPC tokens to the map. Thank you!
@infiniterealms8479 Жыл бұрын
Thanks! Right now our Token System is still very basic. But we have scheduled some improvements like importing character portraits and even 3d models in the next months!
@_just_afox_ Жыл бұрын
Love the Snow/Ash feature! The dynamic colors could definitely be used to convey how different another world is in comparison to what players are familiar with.
@okidokidraws Жыл бұрын
Ive been looking to build one for ages this looks simple
@lucamariotti2598 Жыл бұрын
Just laid a tv on the table.... Turned out fine
@KS-bq4rs Жыл бұрын
what software is used for the maps please?
@infiniterealms8479 Жыл бұрын
It’s our own Software, Infinite Realms, you can download it here: infinite-realms.app/
Пікірлер
I'm thinking of a square hole in the table and the monitor mounted under on a regular monitor arm so it can be raised up flush to the table surface, locked and played on. When not played on, lower the monitor a bit and put a sheet of wood over the hole.
Infinite Realms. Always innovating and demonstrating how to best use their software. Great vid!
Simple and easy to make, Just love it ❤
Where did you find the animated maps ? Great job...❤
All animated 3d maps are part of our own tabletop software. Check it out at infinite-realms.app/ It can also play video maps, image files and universal vtt maps.
Was mir fehlt ist das man als DM notizen schreiben kann auf der Map ohne das es die Spieler sehen
What ceiling mount do you use?
A cheap & simple model like this: www.amazon.com/-/de/dp/B099RYBN68?th=1
Is it possible to add anti-aliasing or something to smooth the edges of the 3d models? Because even in 4k rendering and highest quality level, it's too far of precise :( too bad... I have a radeon 6700 oc so I think it could run with AA. Thanks !
Hi, we do use Antialiasing starting with the "Low Quality" setting at 2x MSAA up to "Very High Quality" at 8x MSAA. Please make sure you also use the 4K render resolution for maximum image quality.
What if the projector was under the table displaying on a semi translucent screen on the table?
Technically this can be done, but in our opinion this has too many downsides. Distance from projector to surface is shorter so you get a smaller projection area. You would also have to cut a hole in your table and protect the projector from accidentally being kicked. It also would be cheaper to just build a TV into the table, which also gets you better image quality / brightness.
Ich hatte die ersten paar Sekunden und dachte mir nur „DAS verstehe ich gut, dass ist der mir vertraute deutsche Akzent“ 😂😂 Aber super Video, genau das hatte ich gesucht, vielen dank!!
Dollarstore White Posterboard - 2 pieces. DONE.
Thanks a lot guys! I'm going to build one on next week!
This is a great idea, love the Swarmlord showing up!
This isn't working at all for me. I created a scene using a legacy map. The app immediately recognized that I am using two screens and it displays the map on both screens. When I select the Fog of War tab and toggle on Fog of War, the map on my main screen dims a little, while the secondary screen goes completely blank. I can move my cursor over either screen and left click and right click and drag and nothing happens. I am running Windows 11 Home edition. I am not sure what IR version it is, because it does not show a version on launch, there is no version information in the settings, and no ReadMe file in the default directory. I downloaded the app from the IR site today.
Hi, by default the "Movement & Token" tool will be active when you start a scene. To remove (and re-add) Fog of War the corresponding "Fog of War" tool has to be active. It is the cloud with eye symbol in the top tool row, you can also activate it with hotkey "2". Also the bottom menu has to be closed for the tool to be working (hotkey "Tab"). See infinite-realms.app/tutorials/tools/#fow
@@infiniterealms8479 yep, that was the issue. It wasn't clear to me from the instructional video that I had to take the extra steps of closing the menu at the bottom of the screen and clicking the eye at the top after toggling on fog of war.
Amazing idea. I still recommend using plexi for the additional protetction and covering it with the foil to avoid.
Oh, that's nice 😊
I enjoy these short simple tutorials. I sometimes forget some of the basics and this was a good reminder. Vielen Dank!
Thanks for the feedback! This one was sorely needed in our minds as we did change the map setup workflow a lot in recent months. And a short video showing the app in action is almost always better than pointing to written tutorials.
This is so cool. And i have a new table that is the right tool for it 🙂
Hi, i started with an "old" TV and switched to an Beamer... this is why: 1) I dont wanted to cut out the table and so the tv was ontop of the table, 2) the viewing angle was not really well (color distortions) and 3) we had relections from the ceiling lamps. then i bought an cheap 1080p beamer from amazon for about 120€ (i checked that is it a really 1080p and no upscaling type). And we love it, 1) we have much more space on the table 2) the beamer is easy to turn on and off via remote. 3) Yes the colors are a little bit paler colors, but the viewing angle is for everyone equally good! (My big advantage is, that our gaming room is in the cellar (a "real man cave") and so we dont have a lot of sunlight there.) One point which is here not mentioned, and which I was worried about: a beamer is much louder than a TV, and this is why i turn it off, if it is not needed... for battles or other "loud" gameplay its totally fine. For an "silent" cave exploration it can be distracting. I was really lucky with the ceiling height in my basement (its really low), because between my table and the celling are only 1,45m and the beamer has no zoom, but the projected picture is exactly 43".... and thats perfect for us.
Thanks for the comment, very interesting. We did not mention projector fan noise because it is no issue in our setup - we are using a Philips projector that is quite silent. But, depending on your hardware, fan noise can of course be distracting.
Ive got a large e-ink display hooked up to a raspberry pi to make paper like maps... Wish id seen your video first lol
Never thought about using e-ink... interesting! 🤔
@@infiniterealms8479 it's an expensive option. $2500 for a 32" display. I just got lucky, my employer had an eink info board and the controller broke. So i asked if I could nab it lol
Where do you find pictures of Playground? Or are they also selfmade?
Greate video. My only concern is that all my minis are magnetize and I am afraid to damage lcd panel with small but strong magnets. Do you have magnets ?
This can can indeed be a problem. Depending on the electronics and strength of the magnetic field I would not rule out the possibility to cause permanent damage with magnets. We do not have magnets on our minis, but if we had we would strongly gravitate towards a projector setup.
I want to buy your aoftware
You can download the software from our website www.infinite-realms.app.
Here's my table, and my thoughts on building and using it: kzread.info/dash/bejne/nqOM08GHYZOpqrA.html
What a great video. Making the decision to switch to both is hard for me. I recently purchased a lot of new battle maps and dont feel it necessary, but feel it would be a great way to enhance my game.
nice. i was using dungeon alchemist and export it as image. now i can get the lights to change them. will it also include animations from dungeon alchemist ?
The Universal VTT file format sadly does not support videos / animations, so no auto generated virtual walls and lights on animated maps. We may be able to work out some format for this with other developers like the Dungeon Alchemist team in the future. For now the latest development release of Infinite Realms features setting manual walls and lights on vanilla image and video maps. This can be an alternative, but requires manual work...
@@infiniterealms8479 just interesting idea maybe a layer system could solve that issue ? Like we get animated map imported and separately we import the lights/walls from dungeon alchemist then infinite realms merge them or stack them top of each other
Thanks for the feedback! We've been thinking along those lines as well. It would be nice to be able import uvtt Data for an "identical" animated map. We'll put this on the list for a future update.
i am excited. cant wait for the update :D. i thought you guys done with the software and wont add more features but am happy that this is not the case
Why go with a projector, when you can just get a 40-55" TV and put it on the table? Best image, no reflections, no shadows.
Good question! It really depends on the situation. Actually we use both solutions and made a comparison video a while back: kzread.info/dash/bejne/oaZ7ppKxpcrbiJc.html
I would recommend taking advantage of the VESA holes during planning and final assembly, as they usually are on the same plane to each other and already have threads in them that can hold the weight of the TV - not necessarily on its back, but for lifting the TV out of the box, if the top is later covered by the acrylic. For the VESA holes, it's better to use threaded rod with a nut however, so as not to accidentally screw in a bolt too deep into the TV and break something - the maximum depth can usually be found in the TV's manual or parsed from the length of the VESA bolts provided. My current plan is to make a very short single leg stand that affixes to the VESA mount, so as to still have access to all that tablespace underneath the TV. Not sure how wobbly this might get, but I'm still prototyping.
Great stuff, very excited for the future of IR :D gonna blow my players away with this stuff :)
raise the tv on legs. This allows people to have books and dice underneath.
We are working on a solution just like this right now! 👍
best german accent ever, you really have mastered it to speak as if you would speak word by word
Is this a thing with german accents? Like that it's more chopped up and not a flow of words?
@@EliaMarc that is the sterotypical cliché, but it is often correct, lots of germans can't speak in a flow of words in english, partly as they are translating their sentence adhoc from german to english while then also thinking about the change in grammar. The better the english capability gets the smaller the breaks get and it gets more flow. Up to a point where the german pronounciation starts to fade away also. But I love accents in general and love it when fellow germans speak with the typical.german.accent.with.no.flow.at.all.and.very.thick.german.pronounciation. A bit like Werner Herzog :D
@@LordBelakor Oh I also love Werner Herzogs accent. It's kind of funny that germans can recognize a german accent the most. Even if it's the most subtle accent, germans will flock to the comments and remind the creator that he is in fact german.
awesome work! just love the product😀
*Promo SM*
Nice to see a simple way to make maps :) I have a couple of friends that play catan with all of the expansions from time to time. I'm gonna try this out and make something nice
This is so cool! I've been contemplating programming something similar only in a web browser, but this is way cooler. An idea for the future could be, using a kinect to make it possible to track the pieces on the board. Then you could add effects like spells, AoE and maybe even ownership of each piece having a player color.
What size of TV did you use?
This one is 40“, we also use a projector sometimes that equals 49“ on the table.
I'm very happy to see Infinite Realms continue its development cycle. Please keep up the good work.
Will do! 😉
You had me at Blind Guaridan
🤘🤘
❤❤❤❤ Amazing ! I just took it Yesterday and i can't wait to explore the all potential of the application !
I'm currently working on a flat screen tabletop table for my D&D Game. So far I've flat screen and the frame And the program, And all that's working fine. But now I'm considering building a wooden table around the flat screen t.v. wooden frame. And after the wooden table was built, actually I was considering a way to make it look like it's made of stone, but on a much bigger scale. So Jeremy, any Idea's? This episode really helped, it gave me a few Ideas. But what do u say?
Where do you get the battlemaps from I have the tv for it but can't seem to find legit battlemaps
Check out Manny Sykes here on KZread. There is a download link for all his video maps in the channel description. Reddit is also a great place to find talented creators and (free) maps: www.reddit.com/r/battlemaps/
Ive watched several videos of people who have built their own TV gaming table and it seems like once people have a frame built they run into the issue of getting the screen to be level inside of the frame and dealing with the fact that the back of the TV isnt flat and they always end up having to very carefuly make support pieces of various geometries to hold the TV level and support it at different places on the back of the TV. Wouldn't it be a million times easier to just run some thick, high quality velcro straps across the frame to cradle the TV in the box? The straps would be precisely adjustable and wouldn't care about the geometry of the back of the TV. It would be far easier to adjust each strap as needed than to cut all of the specific pieces of wood to support the TV at the correct height annd angle for each spot where a support is needed, wouldn't it? You could just place the frame upside-down, lay the TV into the frame screen-side down, then tighten the straps down around the back of the TV and then flip the whole thing over. The screen should be flush with the frame at that point I would think. Even if the TV settles a little bit, if you build it right and do the straps in asmart way, you should be able to adjust the straps as needed with the whole thing face up to raise or lower the screen as needed. In the direction the straps run, the TV should be level no matter what.
Seems like a legit alternative! When placing the straps you would just have to take care to not block any ports and ventilation slots. On the other hand building the central support piece was no real issue. Even for total amateurs like us.
I ended up using the foam packing blocks (slightly altered) on the top and bottom to fit snugly into the frame and allow the tv to be level. I also fastened it to the back with the vesa mounting screws.
Plz, Android & iPad App. Or Online Version Too
We would love to. Sadly this will not be technically possible as several key features we use are only supported on the desktop version of the Unity engine.
Brilliant
The handout feature looks great! I have to learn more about adding character & NPC tokens to the map. Thank you!
Thanks! Right now our Token System is still very basic. But we have scheduled some improvements like importing character portraits and even 3d models in the next months!
Love the Snow/Ash feature! The dynamic colors could definitely be used to convey how different another world is in comparison to what players are familiar with.
Ive been looking to build one for ages this looks simple
Just laid a tv on the table.... Turned out fine
what software is used for the maps please?
It’s our own Software, Infinite Realms, you can download it here: infinite-realms.app/
@@infiniterealms8479 oh thanks
Amazing!