Пікірлер

• 
  @mr.producer745915 күн бұрын

  Bro no offence i don't wanna come out strong but you've got ocd i hope you know that right.

• 
  @Morningstar_Actual22 күн бұрын

  You strip cloth push wire? Great video though. Used to live in Columbia a few years back, go cocks!

• 
  @devinmoreno9823Ай бұрын

  Is this loud enough for a live setting with a drummer?

• 
  @710clique93 ай бұрын

  I am so OCD about my wiring too!

• 
  @robertrogers79393 ай бұрын

  I have 3 Teese wahs.Not a wah guy, but they are magic,musical, not harsh.

• 
  @paulsudhakar54773 ай бұрын

  What is the electronic components .name please send me.Sir.🙏🙏🙏🙏🙏🙏🙏

• 
  @thomasd92373 ай бұрын

  Sounds awful ☹️

• 
  @peanutavalon3 ай бұрын

  Do you run the tone control up all the time?

• 
  @VictorRice3 ай бұрын

  Your tutorial gave me the courage to rewire my '65 Jazz Bass - and it sounds amazing! Thank You Thank You Thank You 🙏

• 
  @0074craig3 ай бұрын

  what Capacitor did you use? 250 k or 500 k ?

• 
  @jazzdrumguy50445 ай бұрын

  I don't know anything about my Squier Jazz bass insides. I do want to upgrade the pots, jack and pickups. I was able to follow along the first part except I didn't understand soldering directly to the back of the pots, but I think I could do it. I was unclear on the bare wire you added, too. I was hoping for guidance when it came to the pickups, but you lost me! I saw 6 wires and wasn't sure what happen to them, which are "hot" or "leads" and which are not, and what to do. I actually ordered an Obsidian control harness plate with CTS pots and Switchcraft jack and quick connects, but I think I could do the soldering. My concern is now I will have 6 pickup wires and no clue which is which! Also how do I ground, and do I need to shield? I also need to get the pickups.......thanks for some guidance, though. I am curious how much you charge to do the harness and install new pickups though?

• 
  @Rofl3r.6 ай бұрын

  Thanks so much for this Zach / Strings Attached. I managed to rewire my own J bass copy with this guide, hugely helpful and I really appreciate it (although going to take me many attempts to make the wiring as neat as yours!)

• 
  @ericjames76806 ай бұрын

  Would this be OK for a at home amp for clean low volume Surf Guitar? I just ordered a Fender Reverb Reissue unit but have no amp yet. Thank You!!

• 
  @okaytastic66915 ай бұрын

  Yes

• 
  @ericjames76805 ай бұрын

  @@okaytastic6691 Thank You!!

• 
  @rareheir7 ай бұрын

  Enjoyed your video. I am going to attempt what you did. What kind of wire did you use for the hot leads and the grounds. Tried putting a pre wired Mojotone into my Squire vintage modified Jag bass SS I did not work so I like what you did. And yes the stock wiring is a rats nest.

• 
  @samstinkeringaround89617 ай бұрын

  Ok big question , the 2 grounds from the pickups can be bundled together the bridge grounded separately to a pot ??

• 
  @Alchemist_X8 ай бұрын

  control plate*

• 
  @50_muhammaddennykartiko749 ай бұрын

  what type of capacitor do you use?

• 
  @jeanpaulcaballero98833 ай бұрын

  Trabaja con 473

• 
  @jeanpaulcaballero98833 ай бұрын

  473

• 
  @jamestom25109 ай бұрын

  Well done and tidy.

• 
  @artnoeldapuada121910 ай бұрын

  Finally, I learned how to check the wiring of a 4 string bass with 3knobs, and I like this guy coz he is wearing Casio F91 wristwatch 😎

• 
  @Garyu71210 ай бұрын

  Hi, very good work👍 thanks for teaching. May I know is any wire can use for the pot connection?

• 
  @Hexsyn10 ай бұрын

  Where is your flux, my dude?! Also sweet jesus i come from the nerf modding hobby and some of your wire choices make me nauseous lol. Why not just mark all of the connextions on the ground wire circuit on an uncut line of wire, stip them at the marks, then solder at the exposed points?

• 
  @madmaximilian578310 ай бұрын

  It's so amazing how you never mention what wires go where, its soooo helpful and encouraging.

• 
  @amiLo_theBassMan11 ай бұрын

  Bravo 🔥

• 
  @simpliweb.officiel Жыл бұрын

  Nice shot ! Thanks !! 👌

• 
  @truthfactreality6814 Жыл бұрын

  I have this pedal. It’s amazing. I’ve just picked up the mini too to make more space on my board. I don’t use the vibrato side and the switch and extra size isn’t needed

• 
  @orange-rv9ek Жыл бұрын

  Sometimes when you lower guitar volume it lessens the intensity of the effect.

• 
  @davidreidy5750 Жыл бұрын

  "Uniform domes of soder"🗽

• 
  @tecnoworks7138 Жыл бұрын

  Do you know of any website to buy that mesh-covered cable?

• 
  @ath20224 ай бұрын

  Amazon . Ebay

• 
  @Two-Eyed_Boy Жыл бұрын

  Literally every owner of the Squire CV Jazz Bass viewing this video...thanks for the detailed instructions!

• 
  @sapphicquartz Жыл бұрын

  hmm i love how it looks but the possibility of a pot going loose with a screw and lightly moving breaking the wiring worries me

• 
  @spaceman8839 Жыл бұрын

  Llano Estacado

• 
  @rhysbooth4842 Жыл бұрын

  This video inspired me to get my bass out and redo my shoddy soldering 🤣

• 
  @rhysbooth4842 Жыл бұрын

  I redid it very well actually. Well for me anyway

• 
  @maurosergiocampelodasilva2521 Жыл бұрын

  Hi Zach! ALL right? Please, Tell me if you factory this Control Plate for Sales?

• 
  @papawx3 Жыл бұрын

  DOD had a two stage phaser they branded the "201" that was good, but not as good as the 45. I have always like MXR pedals. Great bang for the buck.

• 
  @themrbabe1 Жыл бұрын

  Potenciómetros tipo A o B, 250kh o 500kh

• 
  @ericandrews1661 Жыл бұрын

  I can't understand why it's called a picture wha? Anyone know?

• 
  @kylesmith5893 Жыл бұрын

  it has a picture of mr. Teese from 2001 on the back plate. i think this is why

• 
  @ericandrews1661 Жыл бұрын

  @@kylesmith5893 that sounds right, I so appreciate it!

• 
  @ksorsenvlog8175 Жыл бұрын

  Great

• 
  @britaniohilaw3537 Жыл бұрын

  Bravo!! it helps a lot. Thank for sharing the idea..

• 
  @Particle67 Жыл бұрын

  Simply the best wha pedal in the market IMO

• 
  @wobincarson5429 Жыл бұрын

  Hi, I have a J n D short scale jazz bass and wish to replace the pots and re wire it possibly with a jazz bass replacement wiring kit. Any thoughts as to type of posts and Cap? If anyone can suggest i would be grateful for advise, Thanks

• 
  @gbbruno596 Жыл бұрын

  Surprise surprise (for me at least). The brownface Princeton likes TS-style pedals much more than Klons. Very interesting.

• 
  @tomchannelle8386 Жыл бұрын

  This video helped a lot, thanks so much!

• 
  @foxmulder88625 ай бұрын

  You did it on your bass? It reduce the noise or buzz?

• 
  @GrimYak Жыл бұрын

  I know this is a year old video, but there is a reason those are called pushback wires. You dont clip them, you just push the cloth back :)

• 
  @710clique93 ай бұрын

  thats what I thought during the whole video!

• 
  @mazsedhenk6625 Жыл бұрын

  Lokasi servis nya ini di mana om 🙏

• 
  @Michael777Simmons Жыл бұрын

  Thank you

• 
  @patbassman8251 Жыл бұрын

  What is sodder

• 
  @jamesatkin9412 Жыл бұрын

  American solder

• 
  @84nomas Жыл бұрын

  Skip 2:50. Youre welcome

• 
  @diangara3298 Жыл бұрын

  Beautiful amp. Construction and sound is 👌 Any eq pedal can scoop the mids if you also want the option of a blackface tone. And why wouldn't you. With a good spring reverb pedal you can get it pretty much bang on.

• 
  @chriskakosimos2855 Жыл бұрын

  If you need something for your OCD I have some pristiq, serequel, Ativan. Up to you.

• 
  @davidwellings2783 Жыл бұрын

  Lovely neat job!!🥰🥰🍷🍷🎸🎸