Tips & Tricks for machine embroidery, Tutorials on a multi needle embroidery machine. Tutorials on the new & up to date In The Hoop (ITH) embroidery patterns and projects. from Bad Bobbin as well as other designers.
Love it and your choice of materials…where can I find that fun vinyl?
@BadBobbin19 күн бұрын
@@ufoquilter86 my punkbroidery may have them. It's been many years since this video was made.
@ufoquilter8619 күн бұрын
Do you ever use that edging stuff to cover the edges? Wondering if it works well,how,does it stay on long etc…
@BadBobbin19 күн бұрын
@@ufoquilter86 I have not, but ha seen people use it on handbags and other styles of card keepers.
@ufoquilter8619 күн бұрын
Do you have a link to where you get your vinyl? I searched dazzle town but found nothing about a site
@BadBobbin19 күн бұрын
@@ufoquilter86 they went out of business. There are other companies not sure if the have this exact one. My Punkbroidery,, Glitterbug Fairy.
@ufoquilter8619 күн бұрын
What type of vinyl do you use for the wallet?
@dyane186929 күн бұрын
thank you so much!💜
@ufoquilter86Ай бұрын
Do you have a link to the rivet kit that you use? I know some items are thicker than others and the rivet size matters..that is why I am asking ..I don’t want to get the wrong size
@EDWRFleАй бұрын
Well I did them and they turned out 👍👍🏾👍🏾👍🏾 great. Sturdy and just what I wanted on them. The software from Avery was a bit tricky to use but it turned out great. Thank you again.❤❤❤❤❤❤❤❤❤
@BadBobbinАй бұрын
Awesome glad it all work out for you.
@EDWRFle2 ай бұрын
Thank you for this video. It really helped me to decide on what and how to make my labels. ❤❤❤❤❤❤
@CharlieMorningstar5552 ай бұрын
Thank you :)
@indigenousinkbeads20232 ай бұрын
Thank you for sharing! First time seeing this way of making labels, pretty cool!
@BadBobbin2 ай бұрын
You are welcome, thank you.
@normarangel28792 ай бұрын
Great video on patches.
@BadBobbin2 ай бұрын
Thank you, hope it helps.
@sam083303 ай бұрын
Very informative…thx so much for sharing!
@Cruzingkel3 ай бұрын
Love this. Can this be designed for a 6 x10 inch hoop? I do not have any machine embroidery designing programs.
@merryhill47903 ай бұрын
Thank you so much for this information, your instructions were very clear and easy to follow. I have been making individual labels for my quilts with a micron pen, (time consuming) especially since I make two or three quilts a week. This will allow me to spend more time at my longarm or piecing. Thanks again.
@9amStudio3 ай бұрын
Trade Secrets revealed
@syltoy27454 ай бұрын
I think I have the wrong size hoops?? only one side will lock ! Story of my life!
@nesia4564 ай бұрын
Thank you so much for the video. This was exactly what I was looking for. You explained it so well!
@BadBobbin4 ай бұрын
you are very welcome, thank you for watching.
@joygreig77685 ай бұрын
Thank you for a great video ❤
@BadBobbin5 ай бұрын
Thank you, glad you enjoyed it
@reneek1625 ай бұрын
Very Cute!!
@BadBobbin5 ай бұрын
Thank you.
@pammusick22645 ай бұрын
Excellent! Thank you so much! I’ve been wanting to learn this for the longest time! Next, I want to learn to print labels that can be sewn on a baby item ex- Sweet One, Daddy’y Girl, Angel, names. I’d plan to print, cut out and sew them on the front of the toy or garment. Same process just different sized text! What fabric? This is my favorite video ALL YEAR. Thank you. So much!
@Linda-ep3mc5 ай бұрын
Thank you I just got my machine and this was very helpful
@BadBobbin5 ай бұрын
Congratulations glad to help anytime.
@cynthiaallen65235 ай бұрын
This was so helpful! Thank you.
@marialourdesgiannetta12535 ай бұрын
this is so cute!!!❤. that’s a lot of work so thank you!
@sleevesfour6 ай бұрын
Has anyone used terial magic spray? According to that tutorial, you won’t need the paper to run the treated fabric thru the printer.
@delilah45196 ай бұрын
I purchased it from your video Order Number GSV.C5K3-XSVY-PQT5-NKQ8... it allowed me to purchase without an account directly from the video under Thanks
@delilah45196 ай бұрын
hello i bought the product how do i download
@BadBobbin6 ай бұрын
It will be on the website where you purchased it, and the file is in your account . Thank you
@delilah45196 ай бұрын
Can you send an email with the link..I cannot retrieve it
@BadBobbin6 ай бұрын
@@delilah4519 www.badbobbin.com
@BadBobbin6 ай бұрын
@@delilah4519 The only place to purchase this design is on the website. You need to create an account to purchase.
@delilah45196 ай бұрын
Thanks!
@jenniferalexander9206 ай бұрын
You should have used the table press with the appropriate die for the jeweled rivits
@jenniferalexander9206 ай бұрын
I have jeweled rivits from Kam Snaps and the coordinating die
@BadBobbin6 ай бұрын
I do have a table press, it is attached to a stool with a foot press. so I just show it this way for those who do not have a table press. and those who feel/think they can not do a project if they do not have larger tools that they do not want to or can afford to buy. In one of my other videos I do show my press on the stool with the foot press..
@jenniferalexander9206 ай бұрын
Why do the sides not get peltex stabilizer added to them for stiffness?
@BadBobbin6 ай бұрын
Because the sides fold in at the top, with peltex they would'nt have enough give to do so. You can always try it with & see how it works out for you. Let us know.
@jenniferalexander9206 ай бұрын
I use lock tite on the Chicago screws to keep them from backing out
@dandelion12396 ай бұрын
Oh my!! What an amazing idea for the Kamsnap!! So much easier to use, especially for hands that have problems with strength! You’ve devised a great way to make things easier. Thank you again for sharing your talents.
@marisewdesign25236 ай бұрын
Thank you Tammy for your video.
@jasminsierra2047 ай бұрын
Thank you! This was a big help! Merry Christmas 🎄
@BadBobbin7 ай бұрын
You are welcome, Merry Christmas to you too.
@MonicaHoltsclaw7 ай бұрын
Thanks!
@sk8psl7 ай бұрын
Thank you for this video. The ornaments look so much better this way!
@patsyrichardson16057 ай бұрын
What kind of printer are you using. And when you are loading the paper did the blue paper go down or up. Thank you. Great video
@BadBobbin7 ай бұрын
My printer is a Canon Laser Printer. each printer is different as to loading you paper, you will have to run a test on your own paper as to how to load it. put a mark on the top facing up & see which way it comes out and prints.
@HaltWhoGoesThere7 ай бұрын
Do you do anything to make the bow stay tied? Such as a bit of hot glue or something? My ribbon is silky so i feel like it will untie itself if handled.
@BadBobbin7 ай бұрын
yes you can apply either one if being handled,
@LeJean_Dennis8 ай бұрын
Thank you for the video! I used to make my own. It has been a while so great to be reminded. One little tip I remembered from before: you can use Freezer paper vs printer paper. The freezer paper has a shiny side, when you place that on your fabric and press it, it will adhere to your fabric. Then trim your fabric& paper before loading into the printer. Thank you again, very useful information!!!
@LonesomeGremlin8 ай бұрын
Brilliant and really clear instructions. Thank you
@BadBobbin8 ай бұрын
Thank you ❤
@janeridolfi88488 ай бұрын
Don’t see subscribe button
@BadBobbin8 ай бұрын
are you on your phone or computer?
@jeffisgett9 ай бұрын
Tammy, this machine is an Enterprise, but I see a camera on one of your screens. What is that? I have the same machine, but that is not on my machine...It's next to the icon that I touch when trying to adjust the design orientation with my camera and crosshair. Is it related to that? Is your machine a different model than my Enterprise?
@peggybarnhill78999 ай бұрын
Tammy...not sure how I did it but on the reserve needle screen....page 3 ...I cannot reset any of the keys........it's like they are all locked in........Is there a way to NOT reserve any?....or at least fix it so I can use the screen on the actual embroidery screen to switch needles ?...hope this makes sense ...thanks for any help
@peggybarnhill78999 ай бұрын
forgot to say...I have a baby lock endurance 6 needle
@tracybrewer33779 ай бұрын
Thank you for showing this method so easy to follow and understand.
@1CristieLove9 ай бұрын
I was waiting for the Iron On, is the remnant iron on or do you do the adhesive?
@BadBobbin9 ай бұрын
I use heat & bond after printing. the printer is too hot & the glue will melt in the printing process
@carolynpeltz403810 ай бұрын
I have been trying different ways to hang my ornaments without a knot. Thank you so much for your easy directions!! Wonderful!
@BadBobbin10 ай бұрын
Glad it helped.
@tanyacorey864110 ай бұрын
Mine problem is that I can’t get rid of the needle pic when I want to chant the colours. I anchor wouldn’t show up the needle has a red circle around the needle
@BadBobbin10 ай бұрын
Can you take a screenshot or a picture of the screen that you're talking about.
@tanyacorey864110 ай бұрын
@@BadBobbin yes how do I sent that to you can’t see a picture button under this
@darknessfierce420910 ай бұрын
On the baby lock array the six needle there is no reset, but if you just hit the anchor that resets that particular needle and then hit it again to save it Thanks for this video. It was quite frustrating not being able to change the thread - doing good now
@paigerussell191910 ай бұрын
thank you for this video i’m new at this and i needed this
Пікірлер
Love it and your choice of materials…where can I find that fun vinyl?
@@ufoquilter86 my punkbroidery may have them. It's been many years since this video was made.
Do you ever use that edging stuff to cover the edges? Wondering if it works well,how,does it stay on long etc…
@@ufoquilter86 I have not, but ha seen people use it on handbags and other styles of card keepers.
Do you have a link to where you get your vinyl? I searched dazzle town but found nothing about a site
@@ufoquilter86 they went out of business. There are other companies not sure if the have this exact one. My Punkbroidery,, Glitterbug Fairy.
What type of vinyl do you use for the wallet?
thank you so much!💜
Do you have a link to the rivet kit that you use? I know some items are thicker than others and the rivet size matters..that is why I am asking ..I don’t want to get the wrong size
Well I did them and they turned out 👍👍🏾👍🏾👍🏾 great. Sturdy and just what I wanted on them. The software from Avery was a bit tricky to use but it turned out great. Thank you again.❤❤❤❤❤❤❤❤❤
Awesome glad it all work out for you.
Thank you for this video. It really helped me to decide on what and how to make my labels. ❤❤❤❤❤❤
Thank you :)
Thank you for sharing! First time seeing this way of making labels, pretty cool!
You are welcome, thank you.
Great video on patches.
Thank you, hope it helps.
Very informative…thx so much for sharing!
Love this. Can this be designed for a 6 x10 inch hoop? I do not have any machine embroidery designing programs.
Thank you so much for this information, your instructions were very clear and easy to follow. I have been making individual labels for my quilts with a micron pen, (time consuming) especially since I make two or three quilts a week. This will allow me to spend more time at my longarm or piecing. Thanks again.
Trade Secrets revealed
I think I have the wrong size hoops?? only one side will lock ! Story of my life!
Thank you so much for the video. This was exactly what I was looking for. You explained it so well!
you are very welcome, thank you for watching.
Thank you for a great video ❤
Thank you, glad you enjoyed it
Very Cute!!
Thank you.
Excellent! Thank you so much! I’ve been wanting to learn this for the longest time! Next, I want to learn to print labels that can be sewn on a baby item ex- Sweet One, Daddy’y Girl, Angel, names. I’d plan to print, cut out and sew them on the front of the toy or garment. Same process just different sized text! What fabric? This is my favorite video ALL YEAR. Thank you. So much!
Thank you I just got my machine and this was very helpful
Congratulations glad to help anytime.
This was so helpful! Thank you.
this is so cute!!!❤. that’s a lot of work so thank you!
Has anyone used terial magic spray? According to that tutorial, you won’t need the paper to run the treated fabric thru the printer.
I purchased it from your video Order Number GSV.C5K3-XSVY-PQT5-NKQ8... it allowed me to purchase without an account directly from the video under Thanks
hello i bought the product how do i download
It will be on the website where you purchased it, and the file is in your account . Thank you
Can you send an email with the link..I cannot retrieve it
@@delilah4519 www.badbobbin.com
@@delilah4519 The only place to purchase this design is on the website. You need to create an account to purchase.
Thanks!
You should have used the table press with the appropriate die for the jeweled rivits
I have jeweled rivits from Kam Snaps and the coordinating die
I do have a table press, it is attached to a stool with a foot press. so I just show it this way for those who do not have a table press. and those who feel/think they can not do a project if they do not have larger tools that they do not want to or can afford to buy. In one of my other videos I do show my press on the stool with the foot press..
Why do the sides not get peltex stabilizer added to them for stiffness?
Because the sides fold in at the top, with peltex they would'nt have enough give to do so. You can always try it with & see how it works out for you. Let us know.
I use lock tite on the Chicago screws to keep them from backing out
Oh my!! What an amazing idea for the Kamsnap!! So much easier to use, especially for hands that have problems with strength! You’ve devised a great way to make things easier. Thank you again for sharing your talents.
Thank you Tammy for your video.
Thank you! This was a big help! Merry Christmas 🎄
You are welcome, Merry Christmas to you too.
Thanks!
Thank you for this video. The ornaments look so much better this way!
What kind of printer are you using. And when you are loading the paper did the blue paper go down or up. Thank you. Great video
My printer is a Canon Laser Printer. each printer is different as to loading you paper, you will have to run a test on your own paper as to how to load it. put a mark on the top facing up & see which way it comes out and prints.
Do you do anything to make the bow stay tied? Such as a bit of hot glue or something? My ribbon is silky so i feel like it will untie itself if handled.
yes you can apply either one if being handled,
Thank you for the video! I used to make my own. It has been a while so great to be reminded. One little tip I remembered from before: you can use Freezer paper vs printer paper. The freezer paper has a shiny side, when you place that on your fabric and press it, it will adhere to your fabric. Then trim your fabric& paper before loading into the printer. Thank you again, very useful information!!!
Brilliant and really clear instructions. Thank you
Thank you ❤
Don’t see subscribe button
are you on your phone or computer?
Tammy, this machine is an Enterprise, but I see a camera on one of your screens. What is that? I have the same machine, but that is not on my machine...It's next to the icon that I touch when trying to adjust the design orientation with my camera and crosshair. Is it related to that? Is your machine a different model than my Enterprise?
Tammy...not sure how I did it but on the reserve needle screen....page 3 ...I cannot reset any of the keys........it's like they are all locked in........Is there a way to NOT reserve any?....or at least fix it so I can use the screen on the actual embroidery screen to switch needles ?...hope this makes sense ...thanks for any help
forgot to say...I have a baby lock endurance 6 needle
Thank you for showing this method so easy to follow and understand.
I was waiting for the Iron On, is the remnant iron on or do you do the adhesive?
I use heat & bond after printing. the printer is too hot & the glue will melt in the printing process
I have been trying different ways to hang my ornaments without a knot. Thank you so much for your easy directions!! Wonderful!
Glad it helped.
Mine problem is that I can’t get rid of the needle pic when I want to chant the colours. I anchor wouldn’t show up the needle has a red circle around the needle
Can you take a screenshot or a picture of the screen that you're talking about.
@@BadBobbin yes how do I sent that to you can’t see a picture button under this
On the baby lock array the six needle there is no reset, but if you just hit the anchor that resets that particular needle and then hit it again to save it Thanks for this video. It was quite frustrating not being able to change the thread - doing good now
thank you for this video i’m new at this and i needed this
Or use freezer paper
your mot a bad bobbin