A pontoon vs a kayak which one would you say is better ??? I looking to but one or the other buy one but I’m not sure
@Vietd197610 күн бұрын
It’s important to know that the Colorado XT has a wider frame than the wilderness. I followed you measurements without testing and measuring my frame. My platform looked great, but is too big for the wilderness. Now I need to redo things 😢
@xt8ob24 күн бұрын
This is the most professional upgrade video I've seen. Well done.
@Manuel_Z_KayaksАй бұрын
Just curious... You did a lot of mods but we don't know if any of them worked since you didn't have any videos of them in use... If you do I can't find them. I'm going to replace the inflatable pontoons on mine with 2 youth kayaks. I will post a video weather it works or not
@fatmayuruk8670Ай бұрын
Koltuğun dönmesini sağlayan linki atar mısınız
@JohnDozierSr50Ай бұрын
What a great idea. Thanks. Would work great for fly fishing too.
@lukemartinez44802 ай бұрын
What are the boat numbers hanging on?
@whiskeydrunk4205Ай бұрын
Some states like to rob the citizens of money so they require you to license anything with any kind of moter
@Nieves7102 ай бұрын
This is easily over 100 bucks on just pvc, but super cool anyways!
@matth15212 ай бұрын
What height pedestal did you use?
@paulv81332 ай бұрын
Thank you for putting this together. I wish we could have seen it on the water and all put together.
@bigrickshaberdashery27592 ай бұрын
nice job
@schreadersautorepairllc.62023 ай бұрын
That's pretty darn cool. Would you be willing to Sell me 2 of the. Air gauge.? I have eight of these boats.
@TheNWCowboy13 ай бұрын
So I just picked one of these up off Marketplace over the weekend. So when you put the casting deck on and a taller seat, does it feel top heavy?
@michaelross56743 ай бұрын
Question...where can I get a bracket to make wheel set up mine didn't have one??
@polarpreston4543 ай бұрын
Just picked up the same pontoon and hopefully going to add my endura 30lb thrust trolling motor soon
@No3Jacks3 ай бұрын
You're my only hope Obe-wan. Have tried every conceivable arrangement to attach the swivel to the seat bottom. Original seat bolts are too long and pass through both sections of the swivel, ie it won't rotate. Maybe I'm over thinking it. You obviously are far more skilled at solving these problems and better equipped than I.
@patriotperspective93213 ай бұрын
@No3Jacks I had the same problem. I got shorter 1/4-20 hanger bolts and replaced the original ones with the short ones. This gave me clearance to mount the swivel to the frame.
@No3Jacks3 ай бұрын
@@patriotperspective9321 I gave up. I will try again now that I know the secret. Thanks for taking the time to reply.
@patriotperspective93213 ай бұрын
@No3Jacks I will look at what length hanger bolts I used when I get home from work and report back.
@patriotperspective93213 ай бұрын
@No3Jacks So, I used 1/4-20 x 2 in hanger bolts but I think you could use panhead screws with a corse thread on the seat side of your swivel to get good clearance as well.
@No3Jacks3 ай бұрын
May I ask what rod holders you purchased from Amazon? On the parts list for the seat is the hardware that attaches the swivel to the seat listed as well. Going through this very scenario and your solution is one I’d like to use. Thanks
@roberthuerta67833 ай бұрын
I love all your nods and did then to my Colorado pontoon, but I want to ask how did you do the registration plate
@rnrhodes92564 ай бұрын
Wonderful video. Saving up for the Colorado pontoon set up myself. Other than the #$@& mute button, outstanding run through. Will definitely be doing the casting deck idea, plus this jas given me so many other ideas. Thanks a bunch mate, really appreciate your video.
@FRLDZUKO5 ай бұрын
Where did you get your extension kit from?
@mauricecanney74724 ай бұрын
Aliexpress has anything you need.
@josephwieber36175 ай бұрын
Still love watching him
@severalothers6 ай бұрын
Beautiful job on your deck.
@enmoly7 ай бұрын
link para pedir uno?
@offgridutah18 ай бұрын
I like the double tire mod. Platform is nice too. Im curios how much weight it added? I just changed over to a scadden recently whole boat is 28lbs.
@suesturges60228 ай бұрын
I like. We are seniors and need the seat very high. And want to be able to stand. Thank you. Nov 16, 2023
@RobertHuerta-gd1pd8 ай бұрын
Great video, I have a few questions. Do you have a part number for the aluminum plank at Tommy Dock? I've looked over their site and don't see individual pieces, and how long are the deck planks.
@waderemington8179 ай бұрын
Nice work, Brother! I’m in the market, & appreciate you sharing your mods. Also, love the shirt! 👊🏼
@johnarcher948010 ай бұрын
Nicely done! Have you ever attempted a re-entry with the casting deck on?
@davidcrowell528010 ай бұрын
Do you have a material list for this modification?
@Mandarin11063111 ай бұрын
nice mods thank you
@user-uy2zp8jb6q11 ай бұрын
How tall was the pedestal you used for the seat im getting ready to buy the Colorado xts and do the seat and platform mod that you showed
@HimselfCDN Жыл бұрын
Awesome Casting Deck , just bought the material getting on that project ASAP
@goliathuas7624 Жыл бұрын
I contacted Tommy Docks they are showing me a long piece of aluminum, did you cut those steps yourself from a piece of longer stock?
@goliathuas7624 Жыл бұрын
Great video, do you have a part number for the aluminum plank at Tommy Dock? I've looked over their site and don't see individual pieces like that
@bobbayne Жыл бұрын
Hey! Great video! I just bought a used boat and they don’t have the original hardware…. So where did you get your black D-Rings?
@LIVE4THEADVENTURE Жыл бұрын
In your material list you show 2- 1 1/4” x 3” ( four coupling) ?? Is this a 3” necked down to 1 1/4”?? Is this the black furniture pvc or white on this? Thank you for any information
@danieldalton588 Жыл бұрын
Great job bro that sucker is badass
@jefftutmark3092 Жыл бұрын
Did you have trouble with trolling motor shaft length and prop maybe bumping your tires?
@Paul-bf7nj Жыл бұрын
Great job!! This is really well done and I am going to use most of your mods. I am using 1 inch aluminum instead of pvc and wood and putting the battery in a 4 inch deep cut out on my platform in front of the seat. The wheels I did exactly as you and it works great. The motor mount I am using 3, 1/2 inch pvc boards glued and bolted together. I have to say having the wheels down in the lake makes a huge difference…..great thinking. I truly appreciate you sharing your ideas and the professional way you produced the video. Huge thanks!
@DCWenham Жыл бұрын
Nice video showing awesome adaptations. Two questions, what height is your seat pedestal. And, are you able to lift off the battery case lid and remove battery without removing the seat first?
@jeremiahhedeen3879 Жыл бұрын
Do you have these available to buy for the base colorado not the xt or xts? Id be very happy to purchase one from you?
@law40177 Жыл бұрын
Man can you make me the standing platform and ship it to my I will pay you I don't have the tools for this hit me up I'm for real serious about it.
@tri_nofeet Жыл бұрын
Great build. I have yet to do the platform and seat riser. What would happen if your battery or motor goes out? Are you bringing oars as well? I bring fins but I don't think I could kick when I'm in a raise position. In addition my rod holds, down rigger, and livescope is mounted on the side
@MikeSmith-me3bk Жыл бұрын
Can you put a link the the aluminum
@luisrey965 Жыл бұрын
hell yeah buddy im going to do this set up
@ericfehr8632 Жыл бұрын
I would love to see this out for a fishing session! This is a great build. I think I am going to try this build with composite deck boards. Do you think the wooden dowels are a must have or could this be sturdy enough with just the PVC?
@jefftutmark3092 Жыл бұрын
I built a casting deck following a guy named fish and forage, using pvc, and 1/2 plywood, it’s been a dream. Either method won’t steer you wrong.
@PublikSerpnt Жыл бұрын
Can you show how to make the wheels?
@TheFARM2019 Жыл бұрын
Love the mods… im thinking of getting one of these for my fishing channel, gonna make similar mods, but i want to add a pedal drive from a kayak
@wiebercraft4974 Жыл бұрын
A pedal drive would be pretty sweet.
@omarelgardaoui2551 Жыл бұрын
hello, you have already tried it on the sea is it adaptable? THANKS
@wiebercraft4974 Жыл бұрын
Sorry, I never tried it on the sea. I think a kayak is better suited for salt water tho.
Пікірлер
Excellent mods! Sub’d🎉
A pontoon vs a kayak which one would you say is better ??? I looking to but one or the other buy one but I’m not sure
It’s important to know that the Colorado XT has a wider frame than the wilderness. I followed you measurements without testing and measuring my frame. My platform looked great, but is too big for the wilderness. Now I need to redo things 😢
This is the most professional upgrade video I've seen. Well done.
Just curious... You did a lot of mods but we don't know if any of them worked since you didn't have any videos of them in use... If you do I can't find them. I'm going to replace the inflatable pontoons on mine with 2 youth kayaks. I will post a video weather it works or not
Koltuğun dönmesini sağlayan linki atar mısınız
What a great idea. Thanks. Would work great for fly fishing too.
What are the boat numbers hanging on?
Some states like to rob the citizens of money so they require you to license anything with any kind of moter
This is easily over 100 bucks on just pvc, but super cool anyways!
What height pedestal did you use?
Thank you for putting this together. I wish we could have seen it on the water and all put together.
nice job
That's pretty darn cool. Would you be willing to Sell me 2 of the. Air gauge.? I have eight of these boats.
So I just picked one of these up off Marketplace over the weekend. So when you put the casting deck on and a taller seat, does it feel top heavy?
Question...where can I get a bracket to make wheel set up mine didn't have one??
Just picked up the same pontoon and hopefully going to add my endura 30lb thrust trolling motor soon
You're my only hope Obe-wan. Have tried every conceivable arrangement to attach the swivel to the seat bottom. Original seat bolts are too long and pass through both sections of the swivel, ie it won't rotate. Maybe I'm over thinking it. You obviously are far more skilled at solving these problems and better equipped than I.
@No3Jacks I had the same problem. I got shorter 1/4-20 hanger bolts and replaced the original ones with the short ones. This gave me clearance to mount the swivel to the frame.
@@patriotperspective9321 I gave up. I will try again now that I know the secret. Thanks for taking the time to reply.
@No3Jacks I will look at what length hanger bolts I used when I get home from work and report back.
@No3Jacks So, I used 1/4-20 x 2 in hanger bolts but I think you could use panhead screws with a corse thread on the seat side of your swivel to get good clearance as well.
May I ask what rod holders you purchased from Amazon? On the parts list for the seat is the hardware that attaches the swivel to the seat listed as well. Going through this very scenario and your solution is one I’d like to use. Thanks
I love all your nods and did then to my Colorado pontoon, but I want to ask how did you do the registration plate
Wonderful video. Saving up for the Colorado pontoon set up myself. Other than the #$@& mute button, outstanding run through. Will definitely be doing the casting deck idea, plus this jas given me so many other ideas. Thanks a bunch mate, really appreciate your video.
Where did you get your extension kit from?
Aliexpress has anything you need.
Still love watching him
Beautiful job on your deck.
link para pedir uno?
I like the double tire mod. Platform is nice too. Im curios how much weight it added? I just changed over to a scadden recently whole boat is 28lbs.
I like. We are seniors and need the seat very high. And want to be able to stand. Thank you. Nov 16, 2023
Great video, I have a few questions. Do you have a part number for the aluminum plank at Tommy Dock? I've looked over their site and don't see individual pieces, and how long are the deck planks.
Nice work, Brother! I’m in the market, & appreciate you sharing your mods. Also, love the shirt! 👊🏼
Nicely done! Have you ever attempted a re-entry with the casting deck on?
Do you have a material list for this modification?
nice mods thank you
How tall was the pedestal you used for the seat im getting ready to buy the Colorado xts and do the seat and platform mod that you showed
Awesome Casting Deck , just bought the material getting on that project ASAP
I contacted Tommy Docks they are showing me a long piece of aluminum, did you cut those steps yourself from a piece of longer stock?
Great video, do you have a part number for the aluminum plank at Tommy Dock? I've looked over their site and don't see individual pieces like that
Hey! Great video! I just bought a used boat and they don’t have the original hardware…. So where did you get your black D-Rings?
In your material list you show 2- 1 1/4” x 3” ( four coupling) ?? Is this a 3” necked down to 1 1/4”?? Is this the black furniture pvc or white on this? Thank you for any information
Great job bro that sucker is badass
Did you have trouble with trolling motor shaft length and prop maybe bumping your tires?
Great job!! This is really well done and I am going to use most of your mods. I am using 1 inch aluminum instead of pvc and wood and putting the battery in a 4 inch deep cut out on my platform in front of the seat. The wheels I did exactly as you and it works great. The motor mount I am using 3, 1/2 inch pvc boards glued and bolted together. I have to say having the wheels down in the lake makes a huge difference…..great thinking. I truly appreciate you sharing your ideas and the professional way you produced the video. Huge thanks!
Nice video showing awesome adaptations. Two questions, what height is your seat pedestal. And, are you able to lift off the battery case lid and remove battery without removing the seat first?
Do you have these available to buy for the base colorado not the xt or xts? Id be very happy to purchase one from you?
Man can you make me the standing platform and ship it to my I will pay you I don't have the tools for this hit me up I'm for real serious about it.
Great build. I have yet to do the platform and seat riser. What would happen if your battery or motor goes out? Are you bringing oars as well? I bring fins but I don't think I could kick when I'm in a raise position. In addition my rod holds, down rigger, and livescope is mounted on the side
Can you put a link the the aluminum
hell yeah buddy im going to do this set up
I would love to see this out for a fishing session! This is a great build. I think I am going to try this build with composite deck boards. Do you think the wooden dowels are a must have or could this be sturdy enough with just the PVC?
I built a casting deck following a guy named fish and forage, using pvc, and 1/2 plywood, it’s been a dream. Either method won’t steer you wrong.
Can you show how to make the wheels?
Love the mods… im thinking of getting one of these for my fishing channel, gonna make similar mods, but i want to add a pedal drive from a kayak
A pedal drive would be pretty sweet.
hello, you have already tried it on the sea is it adaptable? THANKS
Sorry, I never tried it on the sea. I think a kayak is better suited for salt water tho.
@@wiebercraft4974 thank you