Mate your a legend. Answered a question about the pitch. My motor trim wasn't really effective. As it turns out the zipwake was setup to work up to 30 knots. Setting mine up now to adjust up to 15 knots. Thanks
@sanzokugarage1403 жыл бұрын
Such a beautiful boat, love it. I need to build something similar.
@recilmapis-an34522 жыл бұрын
Thanks Mate very informative...
@euyoooo Жыл бұрын
I bought Zipwakes recently and only been out with it one time. I can't figure out how to disable the dynamic pitch control. I bought it only for the roll control, not the trim.. It was a bit of following seas and I had the boat trimmed accordingly for the conditions and I figured out that the zipwakes were working overtime to bring the bow down...
@pannieslayer7699
Жыл бұрын
In menu set the zip wakes to be down at low speed to assist you getting on plane then to be fully up at like 15 knots, then they will just control roll not pitch, when set right they will get you up then just control roll. Mine are set at 100% at 2 knots and fully up at 17 knots. Think you’ll find they are working fast to control roll, if you need any help contact me on messenger under “Wayne Downer” or reply here and I’ll do another small video for you
@punkit88042 ай бұрын
Hi mate thinking of buying one. How they're going in following sea in 1m swell? And can you run roll in auto and pich off? Thanks from the video
@pannieslayer7699
20 күн бұрын
Yeah you can, I’ll switch to manual at times and set the tabs where they work best
@johninnz Жыл бұрын
How do you find them in the slop mate? I've got them on my new boat and they tend to be bloody dangerous in a quartering sea. Even the dealer said to turn them off when it gets a bit shitty.....Do you have the same issue?
@pannieslayer7699
6 ай бұрын
I just leave them on all the time, good in all conditions, you can slow them down on reaction time
@scottthompson9220 Жыл бұрын
Mate how do you wire it up to key start when the cable suppled goes directly to battery from the interceptor unit
@pannieslayer7699
Жыл бұрын
there is a yellow cable from memory that linked into the Honda loom behind the key start
Пікірлер: 13
Mate your a legend. Answered a question about the pitch. My motor trim wasn't really effective. As it turns out the zipwake was setup to work up to 30 knots. Setting mine up now to adjust up to 15 knots. Thanks
Such a beautiful boat, love it. I need to build something similar.
Thanks Mate very informative...
I bought Zipwakes recently and only been out with it one time. I can't figure out how to disable the dynamic pitch control. I bought it only for the roll control, not the trim.. It was a bit of following seas and I had the boat trimmed accordingly for the conditions and I figured out that the zipwakes were working overtime to bring the bow down...
@pannieslayer7699
Жыл бұрын
In menu set the zip wakes to be down at low speed to assist you getting on plane then to be fully up at like 15 knots, then they will just control roll not pitch, when set right they will get you up then just control roll. Mine are set at 100% at 2 knots and fully up at 17 knots. Think you’ll find they are working fast to control roll, if you need any help contact me on messenger under “Wayne Downer” or reply here and I’ll do another small video for you
Hi mate thinking of buying one. How they're going in following sea in 1m swell? And can you run roll in auto and pich off? Thanks from the video
@pannieslayer7699
20 күн бұрын
Yeah you can, I’ll switch to manual at times and set the tabs where they work best
How do you find them in the slop mate? I've got them on my new boat and they tend to be bloody dangerous in a quartering sea. Even the dealer said to turn them off when it gets a bit shitty.....Do you have the same issue?
@pannieslayer7699
6 ай бұрын
I just leave them on all the time, good in all conditions, you can slow them down on reaction time
Mate how do you wire it up to key start when the cable suppled goes directly to battery from the interceptor unit
@pannieslayer7699
Жыл бұрын
there is a yellow cable from memory that linked into the Honda loom behind the key start
level it in the water not on a trailer
@pannieslayer7699
8 ай бұрын
Yes it’s been done in the water from new