ZIP TIE 2.0 The Most Insane Bed and Fender Delete Can Am X3 On the Internet | Full Custom Doors
Автокөліктер мен көлік құралдары
Check out Jimmy McFalls on Facebook (JSTAR FABRICATION) for an awesome side exit exhaust.
welcome back to another build video, this one is my 2019 can am x3 ds, i did a bed and fender delete along with custom high doors with aluminum skins. 3 piece roof with 18 gauge steel sheets. .120 dom tubing main cage and .095 front and rear tie ins. doors are a mixture of .120 and .095 dom. we removed 3.5 inches from both sides by doing boat sides. i plated the sides with 18 gauge steel and rivited them on for easy removal.
THE CAN AM CREW LLC
Please remember to click the like button and be sure to subscribe to The Can Am Crew to help us grow and to stay in touch with all our awesome adventures...
WAYS TO SUPPORT US:
Become a Channel Member and get Behind the Scenes Info
/ @thecanamcrew
You can get Merch, GPS Tablets and much more on our Website www.thecanamcrew.com
Support us on Patreon - www.patreon.com/thecanamcrew
follow us on facebook
/ the-can-am-crew-139518...
follow us on instagram
/ jhatch_x3
/ thecanamcrew
The Can Am Crew LLC Line Up:
Jesse:
2019 Can Am X3 Turbo
120HP 64"
32" Maxxis Roxxzillas with 5-2 offset wheel STI HD10
WS150 Whalen Tune
HALO 30 Front Diff with Turner Eagle Level 2 Axles, Stock Rear Axles
Super ATV High Clearance Trailing Arms, Stock Front A-Arms
Heated Simpson Seat
Built rear Drivedhaft by me, .095 DOM rear and 2022 style front
Custom Built Cage by ME .120 Wall DOM all the way around 1/16" Steel Roof
Badlands Apex 5500LB Winch, Pre Runner Front Bumper
EBC Sintered R Brake Pads
Stock Radius Rods with a LMUTV Pull Plate
Sheri:
2023 Can Am X3 Turbo
135HP 64"
32" Maxxis Roxxzillas with 5-2 +30 offset wheel STI HD7
HALO 30 Front Diff with Turner Eagle Level 2 Axles, Stock Rear Axles
Super ATV High Clearance Trailing Arms, CT Raceworx Lower Front A-Arms
Built rear Drivedhaft by me, .095 DOM rear and 2019 style front
Custom Built Cage by US .120 Wall DOM all the way around 1/16" Steel Roof
Can Am 4500LB, Pre Runner Front Bumper
EBC Sintered R Brake Pads
Stock Radius Rods with a XRC Pull Plate
Scott:
2020 Can Am X3 XRC
72" 195HP
TCP Radiator
35" maxxis Roxxzillas on stock 6-1 beadlock wheels
CTRaceworx Radius Rods
Custom Front Diff created by The Can Am Crew
Badlands 5500LB winch Stock Bumper
Super ATV High Clearance Trailing Arms
CHECK OUT OUR SPONSORS
Ben Franklin Range Offroad Park
PA's best offroad park located in Templeton just outside Kittanning
www.benfranklinrange.com
Big Earl's Campground
Located near the Hatfield McCoy Ivy Branch Trail System and direct trail access to Little Coal Outlaw Trails..
/ big-earls-campground-4...
www.bigearlscampground.com
Devils Backbone Adventure Resort
Located on the Hatfield McCoy Devil Anse Trail between Rockhouse and Buffalo Mountain Trail Systems
www.devilsbackbonewv.com/
Alpha Powersports and Specialized Vehicles
Central PA's Finest Can Am Dealer and Outboard sales....
www.alphapowersports.net/
hilltopescapewv.com/
Hilltop Escape offers vacation rentals and a restaurant on site with a popular trail access location. Campground and Cabins available and they are located directly on the Indian Ridge Trail System
Sam the Concrete Man
Finest Concrete Man in Ohio
Check his page out on facebook
My Closet Guys
www.myclosetguys.com
Custom Build Closet System Experts
We are known throughout Southern Maryland and Northern Virginia as the premiere organization and storage space experts. Here at My Closet Guys, we provide custom closet, organization, and storage space solutions for home and commercial use.
Ride Royal Blue Resort and Campground
www.rideroyalblye.com
Ride Royal Blue is a premiere lodging and campground location and is located in Pioneer TN and lies up against some of the best riding Tennessee has to offer. they have direct trail access to over 600 miles of trails and borders Brimestone, WIndrock and Tackett creek.
Blue Ridge Comfort HVAC, LLC
If your heating and air conditioning system isn’t keeping your home warm or cool enough, your utility bills have suddenly increased or you notice any other problem, schedule your HVAC repair as soon as possible. Waiting to address the problem causes added wear and tear on the system, which can lead to a bigger more costly issue. At Blue Ridge Comfort, HVAC, we have a team of licensed technicians with the training, tools, and expertise to keep your home comfortable all year long. Our technicians are skilled at troubleshooting and accurately diagnose problems quickly to get your system up and running again. Check out www.blueridgecomforthvac.com
RJR Offroad
check out RJR Offroad on all social media platforms for some great offroad content
Пікірлер: 138
Mister and mrs Hatch much respect I am a carpenter. I do that with wood but what shall I do with steel? Is amazand and You arejust good people It is nice to see A loving family I came from one much respect
You are the best at building those cages. A true artist with the skills to back it up. Unreal.
@TheCanAmCrew
7 ай бұрын
🤙🏻 thank you. I appreciate that.
I like how you're constantly "thinking outside of the box" when it comes to fabrication!! ZipTie 2.0 is gonna be insane !!
@TheCanAmCrew
7 ай бұрын
Thank you 🤙🏻👊🏻
@zackprater-nk4cq
7 ай бұрын
@@TheCanAmCrewmight be time to build a rock bouncer
What you do is equal parts art and engineering. Ziptie reborn looks awesome.
Man i wish he would fix that hanging insulation from the ceiling ! LOL
@TheCanAmCrew
7 ай бұрын
Adds character.
Wow, nice work Jesse.. you are a great engineer. Respect to you and the can am crew.
See you're selling a lot of axle pullers. I had you to build me 1 a while back. Might have been the first I might have put the idea 💡 in your head lol. Hope the Can Am Crew just keeps growing and growing.
Looks like a pair of sunglasses in the front lol.
When I'm thinking you can't get no beter than the last one and y'all do this you guys blow my mind on cages I have no words one day I want you y'all to build me one you guys are freaking awesome thanks again
True artist! Keep doin work on and off the trail.
I had asked you before if you tested the cage design before selling them..... y'all didn't have to go that far! 😂 That's a beef of a cage! Great work! Glad you're all good!
Zip tie looks great unlike the 3 piece roof and the spikes
That is Awesome there is no end to what you can do. Since Sheri’s is New I guess Scott’s is Next.
What a build! Looks great. I love how the whole family is involved. Exhaust sounds great as well!
You knocked it out of the park Jessie, looking forward to the next video, Thanks again for sharing!!!!
Awesome new look great job. Like the idea of the decal
She flows
All the builds you guys do look awesome 👌. Cant wait to see what comes next!
You have vision and the fab skills. Well done bud
Zip Tie looks KILLER. nice job
@TheCanAmCrew
7 ай бұрын
Thank you 🤙🏻
Awesome build. Looks incredible.
Wow!! Looks and sounds awesome!!
That is an awesome build. It looks way better now.
It looks great. Love the mean look it has in the front. Love the color combination. Sounds great.
Wow that thing looks amazing. Great work !!
Absolutely amazing work definitely the best build so far. That exhaust is awesome.
Awesome. Really looks sharp!
Definitely love the build one of a kind
sick build man looks great!
Jesse, Ziptie looks fantastic! Keep up the great job you are all doing, we apricate all the hard work an hours you are all putting in! Can't wait for the Windrock series to start.
You are an amazing mechanic .much respect im going to meet you
You guys do a great job love the cage and it sounds sweet
Isnt another person I'd want a cage from. Cant wait to see what this month of cages brings :) Big respect to Jesse/The Can Am Crew!
That looks Awesome 👌 👏
OMG Dude you knocked out of the park with this build. Those doors are sweet. Sharp ride.
@TheCanAmCrew
7 ай бұрын
Thank you.
Zip tie 2.0 looks killer! The jstar fab exhaust is very nice.
Nice job on ZipTie! Like the hybrid look of plastics in the front and fender/bed delete rear. My machine just asked me for one of those side exhausts now.
Awesome!!!!!! I love it!!!!!!
Looks sick. Love it!
Hay Jesse, Ziptie looks AMAZING!!!!!!!! you are so talented when it comes to building cages! 2.O is going to be an eye catching machine, looking forward to the next video be safe out there guys 🤛🤛👍👍
Ole girl looks wicked! 👍🏻
Eggggggggggggggggggggggggggggggggggggggggslent cage build ! Thanx for sharing! Y'all Rock!!
You have such an awesome talent
Black and Yella, Black and Yella! Sweet! Great Job Crew!
@TheCanAmCrew
7 ай бұрын
Sheri said the exact same thing haha. Black and Yella!
Looks good you do a nice job
Love the build. If I had any questions it’d be with the stabby/pointy doors.
Home run !!
@TheCanAmCrew
7 ай бұрын
👊🏻👊🏻
Great job 👍🏻
This thing looks awesome man
@TheCanAmCrew
7 ай бұрын
Thank you 🤙🏻
Love it Jess. The bumblebee lives. Would suggest a silver/gray swoosh under the can am crew logo up to the B pillar, just to aesthetically keep it inline with the front plastics.
Looks great. Give it hell at windrock!
@TheCanAmCrew
7 ай бұрын
💯💯
Every time y’all build a cage I think it’s the best one yet….but this cage build is so Bad A?? !!! Just WOW !!! Awesome video and thank you for taking us along on this build!!! Good Job Crew👊🏼👊🏼
@TheCanAmCrew
7 ай бұрын
Thanks Jacky 🤙🏻👊🏻
2.0 look’s 🔥
Do great work.
Looks Good Great job!!
@TheCanAmCrew
7 ай бұрын
Thank you
BADASS! love the bed and rear fender delete bro ill be locking something in with you guys real soon! 😎
@TheCanAmCrew
3 ай бұрын
🤙🏻👊🏻 awesome.
Looking great. You do good looking work.
@TheCanAmCrew
7 ай бұрын
Thank you.
Bad ass Jesse! Love how it turned out 💪🏼
@TheCanAmCrew
7 ай бұрын
Thank you 👊🏻👊🏻
Loving the content
@TheCanAmCrew
7 ай бұрын
Awesome. Thank you
Love the low brow man!! I pmd ya. Another good job dude. I still haven't seen aftermath rippin yet......
@TheCanAmCrew
7 ай бұрын
Aftermath will be in the next video.
Looks Awesome would love to have you build a cage for my Turbo S Velocity
Damn, that's awesome. the doors are by far my favorite/ It's hard to make a door that fits the machine but you nailed it. But, I'll be honest I'd have to pull those CT raceworks lowers and paint match them. beadlocks and exaust are sweet and I really like how you did the roof.
@TheCanAmCrew
7 ай бұрын
Thank you, ya the old yellow is a different shade than the new.
looks great, i have the same exhaust
@TheCanAmCrew
7 ай бұрын
I love the exhaust. Especially around 7-8000 Rpm’s haha
I love the build. My only recommendation is add roof grab handles on the roof bars
@seanpayne3056
7 ай бұрын
The middle roof bars
@TheCanAmCrew
7 ай бұрын
Why would you add a grab handle to the roof bar? For this build The passenger has handles and my hands are on the steering wheel.
Sweet
I’m suprised super atv hasn’t sponsored the channel yet and have you selling there parts too .
Iet's gooooooooo 💯👍😎
@TheCanAmCrew
7 ай бұрын
🤙🏻👊🏻
You guys do great work. I would love to have a cage built by y’all one day. Thanks for the tablet and the axle puller. I love em! What days you gonna be at windrock. It would be awesome to get out there and watch you shred. Keep killin’ it.
@TheCanAmCrew
7 ай бұрын
Awesome thanks. We just got back yesterday.
Looks great Jesse, like it better than aftermath, but I’ve always been partial to ziptie, love the tail lights, love the sound, wondering how much head room you have
@TheCanAmCrew
7 ай бұрын
Thank you, same head room as the previous cage. About 4 inches above my head.
That looks absolutely amazing! How do you come up with these ideas?
@TheCanAmCrew
7 ай бұрын
It just comes to me haha.
How do you vent ur garage in the winter and not have it get too humid? I have that prob now when working on my RS1. I do 3D modeling in NURBS. Do you accept design ideas to make a cage for my RS1?
@TheCanAmCrew
7 ай бұрын
Ya absolutely! I have an exhaust fan in my wall I turn on when it gets Smokey or hot.
where did you get the door hinges for the cage?
@TheCanAmCrew
7 ай бұрын
We buy our stuff from utv distribution.
Man, wish i had your skills and your shop setup
🐝🐝🐝💪🏽💪🏽💪🏽👊🏽
Looks great young man.❤
where are you keeping spare axles?
@TheCanAmCrew
7 ай бұрын
We keep them in Sheri’s bag. She runs the cooler and a bag and I have a bag of power tools and recovery gear.
Is the rear shock bent. It looked like it in the video right rear
@TheCanAmCrew
7 ай бұрын
I’m not sure what you mean.
@X3OUTSIDERS
7 ай бұрын
Sorry I think a fell asleep in the middle of that comment LOL
@TheCanAmCrew
7 ай бұрын
@@X3OUTSIDERS haha. All good. The springs may be tilted but the shock isn’t bent.
Are you gonna throw away that psycho cooler? 😁
@TheCanAmCrew
7 ай бұрын
🤣 no, sheri is running it on her machine now.
@tmcd366
7 ай бұрын
lol, she crazy. @@TheCanAmCrew
Curious as to why on zip tie and the other one you just built. You was going for the idea of making them able to take multiple rolls and flip back over and do it again. But you didn’t add a A Pilar support is there a reason for this
@TheCanAmCrew
7 ай бұрын
For racing I can see the a pillar down bar being crucial but for what we do it would just be in the way and in our sight line as we always look out and watch out tires. I’m not against adding it to a customers build if that’s what they want but for ours it’s not necessary. The cages are strong enough to hold up to any rollover we will put it through. Now for racing that’s a different story. They are going 75mph and can roll violently 10 times. We don’t put ourselves in those scenarios.
@REBELRIDERS
7 ай бұрын
@@TheCanAmCrew i do the same kinda riding you guys do and was considering adding it to my cage. Which mine is all .120 1 3/4 dom with gussets and instrtion bars too but I seen the video of the fella flopping his rzr on Facebook the other day and couldn’t help but think it would have saved that cage
@TheCanAmCrew
7 ай бұрын
@REBELRIDERS I think I saw that same video. No cage stock or build should fold like his did. That was a shame to see a cage do that.
Hows the puncture resistant's on the zillas?
@TheCanAmCrew
7 ай бұрын
We have a combined 12,000 miles on zillas and have only punctured one and that was me driving into a tree branch haha. We have had great luck with them
@eastcoastriders1267
7 ай бұрын
@@TheCanAmCrew nice. I'll have to give them a try
Where do you guys get your bungs for the cages?
@TheCanAmCrew
7 ай бұрын
Utv distribution
@trevormcclain2448
7 ай бұрын
@@TheCanAmCrewthank you!
were you guys located
@TheCanAmCrew
4 ай бұрын
Hollidaysburg Pennsylvania
SAWEET
@TheCanAmCrew
7 ай бұрын
🤙🏻👊🏻
Explain that shop. Doors up high and one even has a rotary phone next to it.
@TheCanAmCrew
7 ай бұрын
We explained it in a previous video. It has a wild story. I can’t remember offhand what build video it was but it was a month or 2 ago maybe.
@mikemiller9119
7 ай бұрын
@@TheCanAmCrew where’s the super fans at when you need them? Come guys, tell me which video
pleas start selling pre bent cages
@TheCanAmCrew
7 ай бұрын
I can but shipping kills me. You’d end up paying double the cost. Last time I shipped a cage it cost 1100.00. I just can’t compete with the bigger company’s when it comes to shipping rates.
@toxicbu
7 ай бұрын
understand that, but it would be nice for us diy guys with welding skills , love the work keep it .@@TheCanAmCrew
The box that you threw at your wife is that it ..I need get one that fits a talon
@bjayers1606
7 ай бұрын
When you rolled
@bjayers1606
7 ай бұрын
Not trying to say you're a box thrower
@TheCanAmCrew
7 ай бұрын
@@bjayers1606 that was my cooler that came flying off. She had it on her x3 now
@TheCanAmCrew
7 ай бұрын
Or do you mean something else? I was thinking you meant as I was rolling the box that went flying off at her.
True artist! Keep doin work on and off the trail.