zAutomotive Programming Utility 2.1.4 Install and Tazer Auto Update
Жүктеу.....
Пікірлер: 56
@CTHellcat4 жыл бұрын
Finally, a video I can watch all the way through without having to skip through useless filler content. Thanks for keeping this short and to the point. I'ma load this up this weekend on my tazer.
@WorkPlayDrive
4 жыл бұрын
That’s the goal. I did take out a 48 minute driving montage of my trip to 7-Eleven to get an energy drink 😯
@CTHellcat
4 жыл бұрын
@@WorkPlayDrive Exactly the nonsense I was talking about!
@SModelMafia3 жыл бұрын
Thanks for doing this. We have a FB group,and the questions come up all the time. GREAT info here.
@WorkPlayDrive
3 жыл бұрын
Glad it was helpful! Thank you
@CJwhe12672 жыл бұрын
This video has made it so much simpler! Thank you very much!
@WorkPlayDrive
2 жыл бұрын
Happy to help
@jeremiahfields47503 ай бұрын
Thanks for getting to the point
@jimferry47514 жыл бұрын
I have to update my Tazer now. Thanks for the easy to follow video. I'm in central NJ, I see you have Jersey plates where ya from? Thanks again
@faeez20063 жыл бұрын
Another awesome video, thanks bud.
@WorkPlayDrive
3 жыл бұрын
Thank you 🙏
@Shocka2524 жыл бұрын
I haven’t updated mine since I bought it ☠️☠️
@cameronkirby97644 жыл бұрын
Can you do a Custom Light show video? Would really like to do Light Show 2 but with turns instead of brake on a ram
@dugefresh7063 Жыл бұрын
Can I use this system to reconfigure factory settings on my 2013 DOdge Ram 2500 Diesel, i.e. I want to reset the fuel tank capacity to accommodate a replacement large capapcity fuel tank and recalibrate the factory setting from 31 Gallons to 52 Gallons so my Miles to Empty changes based on the higher capacity tank?
@alexgaona6868 Жыл бұрын
i install tazer but m swap old cluster to new one but the controlls arrows dont work to change setting s creen u think i need to updated? maybe its a old version i have
@johnnycardenas277411 ай бұрын
I need help I updated mine and now it done work
@yobee714 жыл бұрын
The new update doesn't let the daylight running lights on my turn signal. The one before it was working fine. Now new update doesn't turn it on. 😪
@r3drum_ram8374 жыл бұрын
hello mike i just updated my tazer for my 13 charger rt plus and i love the new track mode and track transmission i cannot wait to test it out. but i did notice it removed my sport mode is this correct? i really dont know what will work for my model..be well
@JonathanDiaz-vm5mb
8 ай бұрын
Track eats the gas up a lot faster
@LUIBEFISHIN3 жыл бұрын
I did everything but the tazer won’t show up on the pc the light flashes red but won’t connect to the computer ... the drivers were installed
@jeepjt68684 жыл бұрын
Hey great vid, but do i have to unmarry the tazer befor i do the update and then re marry it?
@WorkPlayDrive
4 жыл бұрын
It’s recommended just in case something goes wrong and you need to restore it.
@JonathanDiaz-vm5mb8 ай бұрын
Do you have to unmarry the tazer first?
@stevealoia4 жыл бұрын
I was thinking of getting one . But I have the RT plus . With super track pack . So would it good to have . Hope all is well mike .
@WorkPlayDrive
4 жыл бұрын
Doing well, the line lock feature alone makes the price tag worth it. Light show is another great option for shows. Take a look at the features on the Tazer site there are a lot.
@stevealoia
4 жыл бұрын
Hey Mike I ordered the Tazer but the WPD code didn’t work . Just a heads up
@braney564 жыл бұрын
Mike, you should hook up with Mod2Fame and do a video. I think he's in N. Jersey.
@BBHemisnJets3 жыл бұрын
2020 challenger after install “”wrong Vin number””” during run through of options . !!! Any ideas?
@WorkPlayDrive
3 жыл бұрын
If you purchased it used the last person did not unmarry it from their car. You can reach out to Zautomotive support to purchase an unlock code.
@BBHemisnJets
3 жыл бұрын
@@WorkPlayDrive Thanks.WPD I'll let them ask me for more $$ ☺ Love the vids -keep em coming NJ/NY brother -
@lukewatkins95594 жыл бұрын
Which one is better, Hellcat Burnbox or the Tazer
@WorkPlayDrive
4 жыл бұрын
Hellcat the burnbox gives you the main features line lock cool down and light show. If you want the added features like windows from the key fob you need the full taZer.
@392jr94 жыл бұрын
Everything I plug in my tazer it tells me “device not found” I need help
@fabryronaldo
2 жыл бұрын
I got thiz problen now divece not found Help !!!!
@MegaLimeboy
2 жыл бұрын
@@fabryronaldo me too, I closed the app and re opened it and it worked
@hemichallenger36434 жыл бұрын
I have whatever firmware shipped with mine back May 2018
@datboykris07
3 жыл бұрын
Yes sir!
@domcam884 жыл бұрын
Im having issues with doing my update on my Mac computer
@qbanking
4 жыл бұрын
Dominic Campbell don’t break it just go to a windows computer
@1markettim4 жыл бұрын
What does the new update do ?
@braney56
4 жыл бұрын
@1markettim It's just the latest software used to download newer versions of firmware.
@richardtepas48324 жыл бұрын
what is unclear to me, should i unmarry before updating and are previous settings saved ?
@WorkPlayDrive
4 жыл бұрын
I always lean towards the side of caution and un-marry before updating. I log all the settings as I change them, it also helps when trying to answer questions. When you un-marry the Tazer returns your car to the stock settings and forgets the changes you have made. Post update I hop back in the car and reset the settings I want to keep.
@richardtepas4832
4 жыл бұрын
okay, thanks !
@joshuabrumback9681 Жыл бұрын
WPD made it look soooo easy. This kinda ish is never easy for me lol. I think it's zautomotive that's the problem not me. My screen didn't look like this. When i check the app it says i have 2.3.0, the new update is 2.5.9. So i erased the file and reinstalled it. It's coming up as 2.3.0 again. The page in the app doesn't come up for me. Let's be honest here, zautomotive don't wanna hear from us after the purchase. There's signs on the sight, in their emails and even wpd hinted at it. I can't get this damn thing working and i don't wanna call em fml
@resdawgs Жыл бұрын
Come on man nobody is showing the firmware cable anywhere
@WorkPlayDrive
Жыл бұрын
Let me know what you need I’ll see if I can help.
@resdawgs
Жыл бұрын
@@WorkPlayDrive i need to know what type of cable needed to update firmware
@resdawgs
Жыл бұрын
2018 charger
@resdawgs
Жыл бұрын
@@WorkPlayDrive i need to know what type of cable is needed
@WorkPlayDrive
Жыл бұрын
The cable is a USB mini from mono price. Here is a link www.amazon.com/dp/B003L18SHC/ref=cm_sw_r_as_gl_api_gl_i_X5DRDAFJEZS7XBGJ5V3J?linkCode=ml2&tag=workplaydri05-20
Пікірлер: 56
Finally, a video I can watch all the way through without having to skip through useless filler content. Thanks for keeping this short and to the point. I'ma load this up this weekend on my tazer.
@WorkPlayDrive
4 жыл бұрын
That’s the goal. I did take out a 48 minute driving montage of my trip to 7-Eleven to get an energy drink 😯
@CTHellcat
4 жыл бұрын
@@WorkPlayDrive Exactly the nonsense I was talking about!
Thanks for doing this. We have a FB group,and the questions come up all the time. GREAT info here.
@WorkPlayDrive
3 жыл бұрын
Glad it was helpful! Thank you
This video has made it so much simpler! Thank you very much!
@WorkPlayDrive
2 жыл бұрын
Happy to help
Thanks for getting to the point
I have to update my Tazer now. Thanks for the easy to follow video. I'm in central NJ, I see you have Jersey plates where ya from? Thanks again
Another awesome video, thanks bud.
@WorkPlayDrive
3 жыл бұрын
Thank you 🙏
I haven’t updated mine since I bought it ☠️☠️
Can you do a Custom Light show video? Would really like to do Light Show 2 but with turns instead of brake on a ram
Can I use this system to reconfigure factory settings on my 2013 DOdge Ram 2500 Diesel, i.e. I want to reset the fuel tank capacity to accommodate a replacement large capapcity fuel tank and recalibrate the factory setting from 31 Gallons to 52 Gallons so my Miles to Empty changes based on the higher capacity tank?
i install tazer but m swap old cluster to new one but the controlls arrows dont work to change setting s creen u think i need to updated? maybe its a old version i have
I need help I updated mine and now it done work
The new update doesn't let the daylight running lights on my turn signal. The one before it was working fine. Now new update doesn't turn it on. 😪
hello mike i just updated my tazer for my 13 charger rt plus and i love the new track mode and track transmission i cannot wait to test it out. but i did notice it removed my sport mode is this correct? i really dont know what will work for my model..be well
@JonathanDiaz-vm5mb
8 ай бұрын
Track eats the gas up a lot faster
I did everything but the tazer won’t show up on the pc the light flashes red but won’t connect to the computer ... the drivers were installed
Hey great vid, but do i have to unmarry the tazer befor i do the update and then re marry it?
@WorkPlayDrive
4 жыл бұрын
It’s recommended just in case something goes wrong and you need to restore it.
Do you have to unmarry the tazer first?
I was thinking of getting one . But I have the RT plus . With super track pack . So would it good to have . Hope all is well mike .
@WorkPlayDrive
4 жыл бұрын
Doing well, the line lock feature alone makes the price tag worth it. Light show is another great option for shows. Take a look at the features on the Tazer site there are a lot.
@stevealoia
4 жыл бұрын
Hey Mike I ordered the Tazer but the WPD code didn’t work . Just a heads up
Mike, you should hook up with Mod2Fame and do a video. I think he's in N. Jersey.
2020 challenger after install “”wrong Vin number””” during run through of options . !!! Any ideas?
@WorkPlayDrive
3 жыл бұрын
If you purchased it used the last person did not unmarry it from their car. You can reach out to Zautomotive support to purchase an unlock code.
@BBHemisnJets
3 жыл бұрын
@@WorkPlayDrive Thanks.WPD I'll let them ask me for more $$ ☺ Love the vids -keep em coming NJ/NY brother -
Which one is better, Hellcat Burnbox or the Tazer
@WorkPlayDrive
4 жыл бұрын
Hellcat the burnbox gives you the main features line lock cool down and light show. If you want the added features like windows from the key fob you need the full taZer.
Everything I plug in my tazer it tells me “device not found” I need help
@fabryronaldo
2 жыл бұрын
I got thiz problen now divece not found Help !!!!
@MegaLimeboy
2 жыл бұрын
@@fabryronaldo me too, I closed the app and re opened it and it worked
I have whatever firmware shipped with mine back May 2018
@datboykris07
3 жыл бұрын
Yes sir!
Im having issues with doing my update on my Mac computer
@qbanking
4 жыл бұрын
Dominic Campbell don’t break it just go to a windows computer
What does the new update do ?
@braney56
4 жыл бұрын
@1markettim It's just the latest software used to download newer versions of firmware.
what is unclear to me, should i unmarry before updating and are previous settings saved ?
@WorkPlayDrive
4 жыл бұрын
I always lean towards the side of caution and un-marry before updating. I log all the settings as I change them, it also helps when trying to answer questions. When you un-marry the Tazer returns your car to the stock settings and forgets the changes you have made. Post update I hop back in the car and reset the settings I want to keep.
@richardtepas4832
4 жыл бұрын
okay, thanks !
WPD made it look soooo easy. This kinda ish is never easy for me lol. I think it's zautomotive that's the problem not me. My screen didn't look like this. When i check the app it says i have 2.3.0, the new update is 2.5.9. So i erased the file and reinstalled it. It's coming up as 2.3.0 again. The page in the app doesn't come up for me. Let's be honest here, zautomotive don't wanna hear from us after the purchase. There's signs on the sight, in their emails and even wpd hinted at it. I can't get this damn thing working and i don't wanna call em fml
Come on man nobody is showing the firmware cable anywhere
@WorkPlayDrive
Жыл бұрын
Let me know what you need I’ll see if I can help.
@resdawgs
Жыл бұрын
@@WorkPlayDrive i need to know what type of cable needed to update firmware
@resdawgs
Жыл бұрын
2018 charger
@resdawgs
Жыл бұрын
@@WorkPlayDrive i need to know what type of cable is needed
@WorkPlayDrive
Жыл бұрын
The cable is a USB mini from mono price. Here is a link www.amazon.com/dp/B003L18SHC/ref=cm_sw_r_as_gl_api_gl_i_X5DRDAFJEZS7XBGJ5V3J?linkCode=ml2&tag=workplaydri05-20