This is the biggest design flaw of the PS5 in my opinion, the average user will not want to do this. Hopefully it's re-designed on the Silm/Pro model

@rayan_ro5412

10 ай бұрын

If we clean the PlayStation 5 fan every one or two months, this will not happen

@JohnGlasscock

10 ай бұрын

@@rayan_ro5412 You will be surprised. The PS5 I took apart in this video has been used maybe 20 hours in its lifetime & has been used in all my cleaning videos. As you can see, there was still dust in the power supply vent

@TheeThunderGod

10 ай бұрын

Yup, biggest flaw that i called 2 years ago when i noticed how much dust my PS5'S doubled sided fan eats

@kuroxell

10 ай бұрын

​@@JohnGlasscockthat's crazy. I'm kinda worried now, mine's just two weeks don't wanna open it yet

@JohnGlasscock

10 ай бұрын

​@kuroxell Don't worry. It's only an issue if over time the PS5 starts randomly shutting down or overheating with the warning. Keeping the cooling fan clean is the best prevention but it's not a permanent solution unfortunately

There is no way i'm doing this without breaking something

@randomguy1912

10 ай бұрын

You're not alone on that; I'm not that confident about it myself.

@ZXR_NIN-J

10 ай бұрын

Just keep the console sideways to prevent the majority of dust partials

@kaspauf06

10 ай бұрын

@zxr_NIN_j horizontal is going to collect less dust?

@irishlad1367

10 ай бұрын

​@@kaspauf06yes, just like the ps4, I had mine for years and never had to clean it because there was hardly ever any dust

@Alirezarz62

10 ай бұрын

If it is overheating and the culprit is the PSU then give it to a professional to clean it for you. The connectors on the console specially the ribbon connectors are very easy to break and if you break them it's gonna cost you a lot to repair them

It’s quite impressive how you’ve packed so much information into a 5 minute video!

@DexterRose

10 ай бұрын

he does a really good job, most other electronic tutorials, by the time they say let's get started these videos are done. I personally hate wasting even a couple of minutes sitting through some introduction and some other nonsense this just gets right to the point

@monkeyball9223

10 ай бұрын

​@@DexterRosewell said

@SkinCareLuver

10 ай бұрын

There's no much to remove from the PS5 so of course the video is quick

@Niiixxxx

7 ай бұрын

@@SkinCareLuver Yeah but some videos ramble on for 10 minutes before even getting to the point which takes all of 30 seconds to explain. So this is great.

Im too scared to take anything apart lol best i can do is carefully take out the dust through the fan grate

@JohnGlasscock

10 ай бұрын

Prevention will help keep this from happening & extend the life of the PS5 so good job 👍🏻

@mikem5424

10 ай бұрын

I was too. I'm a stoner and I forget how to put most shit back together lol. But I bought a kit and took my time put the screws in different dishes lol it wasn't that bad honestly

@damascus6480

10 ай бұрын

Watch videos and take your time, don’t force anything that feels like it won’t come apart.

@yuriwolfvt

10 ай бұрын

I just take a keyboard blower to the back then put it in vac mode at the dust catchers. No taking anything apart.

@DevilFan669

10 ай бұрын

@@JohnGlasscockI’m too scared to do this too since I don’t know what I’m doing like you do and I might not have the right screwdriver for it either

For anyone that might be planning on doing this and feel a bit leery, I would recommend taking pics of everything before disassembly as you go. Also, get some paper cups or other small containers for all of the different screws. You might even want to label them with where they came from. Doing this keeps stuff from getting lost or mixed up and gives you pics to reference when putting everything back together and connecting the wires. 🙂

@rosie684

10 ай бұрын

Or watch the 2nd half of this video

@willam-gv9fu

10 ай бұрын

I was just thinking that

@jun4466

7 ай бұрын

I'm no longer confident with disassembling and reassembling PS products, therefore, I'm certainly not going to go in depth with this particular machine. I recently disassembled PS4 (original model) in order to clean off and reapply thermal paste inside the CPU. I followed a tutorial, which I thought was easy to follow along. During the disc drive detachment, the tutorial said to LIFT the lip to remove ribbon, instead of PRESSING DOWN. A tiny piece of the T-shaped ribbon broke off inside the lip, but I didn't think anything of it at the time. As it turned out, now the power & eject button no longer responds, and disc drive no longer accepts any BR & games. :(

@Niiixxxx

7 ай бұрын

@@jun4466 Yes I attempted to fix my PS1, unsuccessfully. Fixed 2 x PS2s by replacing the laser but both eventually broke again and bought another off marketplace. Have a PS3 that won't read BluRay discs just DVDs but don't have a security torx to undo the screws. At least 4 PS2 cordless controllers have ended up in a worse state after attempting to fix them. At least, for now, my PS4 and PS5 are working well although I do have a PS4 controller that half the buttons don't work. I found a page that suggested taking it apart and reseating the flexible plastic circuit board (PCB). Did all that 3 times with no luck and the person said I'd need to order a new PCB. Haven't done that yet.

@laurissamason8610

11 күн бұрын

I agree and have zip lock baggies to hold each set of screws in the order you took them out(levels of disassembly) that way you can follow your guide and place them in order

As an average user who's not particularly mechanically knowledgeable there's no way I could do all of this successfully lol.

@feeamarante

10 ай бұрын

Same

@sofachrome

10 ай бұрын

You... you can't use a screwdriver?

@tobiassarrau6870

3 ай бұрын

Ofc you can

@1ZosoLZ

2 ай бұрын

@@sofachromeit’s the ribbons we’re worried about. I have huge hands, probably gonna damage something

@moolightfoxkill

Ай бұрын

@@sofachrome Fear of breaking or disassembling it somehow and not being able to put it back together like i had a ps4 controller it had stick drift i tried to put it back together but i couldn't so it went to the trash. i was 13

If you're not confident enough to do a full disassembly, just go as far as removing the fan. Then get a UV torch and a long q-tip used in electricals. The torch highlights where dust is, making it glow light blue. With the fan removed, you look down the cavity space, down the length of the console below the fan, and you can see the 'cheese grate' PSU holes, and fish out any dust bunnies with your q-tip. Personally, I did a full disassembly and found it not really worth it in my opinion. There wasnt much dust in my heatsinks. Most of it was on the PSU holes which I could have just as easily cleaned using the way I described. Its quite a design flaw to have these important vents, facing upwards, directly underneath the fan... dust just falls straight onto them.

@simon-515

4 ай бұрын

Thank you. I am past mildly pissed about this complete failure of a machine.

@guily6669

4 ай бұрын

The main problem is dust build up is not the flaw here but rather the metal liquid compound which eventually leave dry spots and will start going bad. Sony should have went for those liquid changing thermal pads instead which start to get liquid with heat and have close to liquid metal heat transfer.

@romarioalvarez7397

9 күн бұрын

Should I use normal cotton q tips or the microfiber ones?

@ogvektor

3 күн бұрын

problem is this does not solve the overheating problem at all

To minimized the frequent cleaning is to make sure your desk is not also accumulating dust or dirt by cleaning the top. Also, you will know that your console is gathering dust if your incoming and outer vent fins are collecting or sticking some dust particles from those areas.

I really appreciate that you show the steps to re-assemble the system as well! Believe it or not lots of people leave that out.

Or you guys can get a angle brush, and clean it from the inside of the fan. Once you’re done you can tilt it vertically with the fan side on the floor or table and smack the top to bring the whole dust out you cleaned out. I may have not explain it good but I hope you guys got the idea. There’s no need to take it apart 👍

@JohnGlasscock

10 ай бұрын

Thanks for sharing ideas I appreciate it

@blkrazor8866

10 ай бұрын

That might be a good idea. What angle brush are you using?

@Kevun777

10 ай бұрын

@@blkrazor8866 hey I replied to your comment but I think KZread deleted it lol. But long story short; I used car detailing brushes that come with two sets. One that are straight forward for cup holders and the other that are mini nylon brushes that looked like a tooth brush but curve at the end of the bristles giving it that “angled” look. But for fast convenience, a toothbrush would work or a long and skinny brush should do the job 👍

@Kevun777

10 ай бұрын

@@JohnGlasscock please try this out John! This clean out my power supply conveniently

@lancealex382

10 ай бұрын

I have a launch day ps5 and did the entire clean about a month ago after a few overheating shutdowns. Couldn't believe how many clumps of dust were lodged in the system radiators. Well worth the 2 hours to slowly and carefully do.

My dear, thank you, yes this is a complete disassembly, in just over 5 minutes of video will be saved for the future, my PS5 is new bought this month. Thanks for the detailing of the screws and the reminder attention to the flat cables. Very useful. It is not an activity for everyone, it requires care.

you know, there are a TON of videos on this topic but i really appreciated this one for being through and complete. So man people stop after the teardown and fix but never show you how to put it back together but you did the whole thing. That is commendable and eaarned a subscription for from me. beyond that thank you b/c this did the trick for me. Beyond that the teardown and build up sections of the video were great. In the future however maybe quickly teach and remind people about static discharge and how to deal with it (ground themselves) after moving around.

I would rather have a professional technician do the work for me instead of myself screwing up my system.

I felt like I was doing open heart surgery just installing an SSD, I don't think I would even try to do this on my own, but thanks for making great how to videos like this one

This was exactly the issue. Fixed it. Didnt need to take it apart, but the first 30 seconds was all i needed to hear. Thanks 🔥🔥🔥

@anusenpai6945

8 ай бұрын

So how did you do it ???

@VillanThaHero

8 ай бұрын

​@@anusenpai6945if you know how to remove ur fan then u got this easily...i just fixed mine. Just took out my fan.. And got a small little vacuum hose and put it directly on that power supply vent and vacuumed it.. But at first i was scared and just grabbed a small paintbrush i had and slid my hand in tha p5 wit that brush and just cleaned it that way then i was thinking..... "Why dont i try and remove all that dust i just knocked INTO my power supply since i just cleaned everything else"??? so i vacuumed after... But its not a necessary step.

Get a small handheld vacuum with a bendable hose. If you take the fan out, you can bend the hose into the power supply and vacuum it out. I havent seen any dust buildup on mine and ive opened my ps5 4 times since owning it. The fan will get a decent amount of dust on it as well as the exhaust vents. But a nornal vacuum will reach those and you dont need a special mini vacuum for those. Im guessing as long as you consistently clean the fan and exhuast ports, the power supply won't get buildup on it.

I've taken just about every game systems apart and successfully put them back together in working order. This video is very helpful 👌

@JohnGlasscock

10 ай бұрын

Good job 👍🏻 hopefully you never need to but if it ever happens it's not too bad

Hey man, just want to say thank you so much. My power supply unit was choked with dust. Followed this video and got it done. I was so nervous and fearing i woukd wreck it. Never so happy to see a PS firing back into life. Thanks again ❤

You can also find an authorized repair center and aside from deep cleaning, get the Liquid Metal reapplied especially if you play vertically. I had overheating issues and the fan going crazy with certain games and when I got my Ps5 checked, the insides were clean even the PSU. Apparently, the liquid metal slid down a bit creating a dry/hotspot on the APU. After the reapplication of Liquid Metal, my PS5 Runs like a champ with the sound of a sleeping baby even at intensely graphical demanding moments in games. :)

@catastrophe218

6 ай бұрын

How much did that cost you?? ... Asking for a friend.. 🥴

@gnawteejepstv

6 ай бұрын

@@catastrophe218 In the philippines, it cost me around 30-40 bucks.

Very informative. My wife and i were able to do it together at 2am while drinking. Usually i cant do anything except turning any machine on and off. Somehow didn’t F anything up by just following step by step. Thanks.

Am gonna say this for many of us: NO THANK YOU😐✋

I followed this guide and it great but I found out that you don’t need to take out those 16+ screws from the motherboard to get to the power supply. I just removed 3 screws that attached the casing to the other side of the console, then carefully pulled back the 2 long wires and the whole thing came off revealing the power supply.

removing the metal plate ~2:28 was the trickiest bit i found because of the blu tac (?) securing it to the motherboard, felt like it didn’t want to come apart! little bit of gentle but firm prying around the edges got it to come away many thanks for the upload 🙏

Thank you for all of your vids. You always are straight to the point and don’t beg your audience for a like for 5 minutes straight

@eliv.1033

10 ай бұрын

Well said....👍

@eliv.1033

10 ай бұрын

I also gave u a like...🤔

The anxiety I have watching you take this apart. Hahaha. I'm not even doing it and it's making me anxious about getting it back together. Love your videos! Always straight to the point with no garbage filler. One of the best on KZread.

@JohnGlasscock

10 ай бұрын

I appreciate it thank you

I was a bit hesitant about even just removing the fan but I watched several videos on KZread and followed the steps pretty easy tbh ps5 still working fine as usual

Thanks your a huge big help John your content is so straight to the point and plenty of tips of what you should or should not do when owning Sony products

I have done around 2-3 ps4 repairs like this just by watching YT videos and i think ps4 is much easier compared to ps5. And the best part was i went to multiple ps4 repair shops before and they all took my money and didn't do anything and told me we cant fix this buy a new one so i did that and bought ps4 slim and after 4 month even it caused overheating problem so i took it up on my self to repair both changing thermal paste and everything

You can just use a tooth brush after removing the fan. A standard one can reach. Then vaccuum or use compressed air. I also reccomend having it upside down while brushing so that the dust falls towards where the fan is.

One thing that John didn’t tell you is that this will definitely void the waranty, so there’s no going back if you mess up. Do this at your own risk.

@mabybee

10 ай бұрын

Yeah, he didn’t mention that & should’ve for clarity. However, anyone that has any familiarity with warranties is going to realize that pretty quickly. There are exceptions but just about any warranty is going to come with a clause that the warranty is voided if the defect stems from misuse of the product or owner made alterations that affect/disable the product. Still, I agree. It’s important to make disclaimers about things like that for viewer clarity & just as a legal precaution. It might be that he’s made so many videos that involve disassembling the system so it’s just assumed knowledge for his regular viewers to anticipate the warranty being nullified if you do anything more than change out the covers or possibly add an SSD. But if anyone is a first time viewer or hasn’t gathered that assumption yet, it very well could lead to some real issues for those viewers.

I started covering my console while not in use. I don't use rest mode. I turn it off completely and cover it to prevent dust build-up.

For the first generation of PS5s, not only you need to clean the dust as mentioned in the clip, but also you need to take a look at your liquid metal. the other day, I opened up mine and the LM was not in a good condition as it had several little dry spots on both MB and Heat sink. This process is even more difficult than just simply cleaning the dust out of power supply and the heat sink.

@shakengandulf

10 ай бұрын

I would not recommend this at all, no one needs to check the liquid metal.

@amirsamadishams7253

10 ай бұрын

@@shakengandulf I completely get what you're saying. Although taking a look at LM is rather difficult for an average console user, but based upon my own console it is necessary to check it.

I keep a small cleaned cooling fan pointing at the vents. Finally, I took apart my ps5 and noticed I barely had any dust build-up! I always make sure my cooling fan is 100% clean!!

Saving this video for reference 😁 Also just subbed 👍 Really helpful. I haven't had to clean my ps5 yet since it doesn't run hot and I keep the system in an open space most often, but since my ps5 is past its warranty at this point guess I have nothing to lose down the road.

Bought the darkplates 2.0 they have mesh filters on both sides of intake fan. This will dramatically reduce dust buildup. Had 0 issues since launch day. Just keep a tidy room and keep pets away.

I took apart a drill once; it got soaked from a leak and needed some parts changed and cleaned so I gave it a go. So many steps and items to remember. After the clean and changeover of parts I ressembled and closed it up. It worked. But what was this little metal strip I had just found? A speed regulator. So power drops out and ramps up whenever it wants now lol. I watched the first 20 seconds of this and was like I’ll do this, easy. Another 20 seconds and I was like no way in hell. I love my PlayStation too much to break it through forgetting a step haha

I was surprised how easy it was to take apart, Especially compared to previous PlayStation consoles. I’ve never taken apart much of other consoles and this was my first serious disassembly.

@northernassassin6056

10 ай бұрын

There was like 40 screws in 5 different sizes and ribbon cables all over. There's nothing easy about that disassembly.

@damascus6480

10 ай бұрын

@@northernassassin6056 try previous consoles than try that one. Was easy for me at least.

Thanks for the video John! My PS5 was overheating because of a very dusty power supply. Your video helped me tremendously. On a side note: I really hate ribbon cables 😭

Thanks for adding this to my next clean up time with the PS5. Last clean up was with the fan and heatsink. I just gotta get some confidence in disassembling ribbon cables and cables in general on this console. Any tips?

Thank you for the excellently narrated post. Everything went well on my tear down deep clean. Thank you again I hope you keep up loading great posts. 🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳

Thank you for this! My son’s PS5 was doing weird stuff. We cleaned the vents and took out the fan but never saw those holes. I just took it apart again and all those holes were full of dust. 😳

I've been watching your videos since before i got a ps5 thanks for the tips and hacks❤

Finally someone who shows it correctly, step by step, thanks for that! 💯

@JohnGlasscock

10 ай бұрын

That was the goal, no problem!

You can solve/prevent 99% of the dust issues by removing the covers and the fan for a quick cleaning. Take compressed air and spray the console out thoroughly after a few wipes of the inner covers and tooth brush on the inner cooling grates, and put it back together. Job done. No need to take anything else apart. Several vids of this procedure online. If you do this once every 6 months you shouldn't ever have to do an extreme teardown like in this video. I just performed this on my disk version PS5 after only purchasing it last Black Friday and it had a lot of dust even for a non smoking environment. I agree the console needs a redesign but I am impressed with how easily it disassembles and allows for memory expansion.

@Nick-uy9wv

10 ай бұрын

User manual says nothing about canned air. It specifically stated use a vacuum

@daygon128

10 ай бұрын

@@Nick-uy9wv either works just fine. Canned air does not have the psi necessary to damage the internals of the unit.

@Jackruby22

10 ай бұрын

I didn’t remove my fan, I just used a vacuum to clean inside and vent holes. It did the job, removed lots of dust and No more shutdowns (for now). Will make it a routine to do this every few months.

This guy knows his thing. Im not gunna risk it to pass a toothbrush on the power supply

My ps5 was over heating even after cleaning realize that it mainly overheated because i had my ps5 to close to the wall preventing proper ventilation. So make sure ya have yours in a well ventilated area

It's quite amazing how you managed to create 20 videos about the same thing.

nice but i guess my ps5 will just overheat :(

@Storm911gaming

9 күн бұрын

Try the angle brush method listed up above

It's currently illegal to have the "warranty void if removed" sticker on products and yet Sony hasn't been called out on it on all PlayStation consoles. A law was passed sometime in the 1970s. When I heard about that I went ahead replaced my 12 year old PS3's thermal paste 2 years ago and it has been absolutely silent since then. Some thing with the fat PS4 going on to 8 years at the time. The amount of TP they put in the consoles were SUPER small which is why the fans are so loud. That and the thermal paste at the time was also dried up.

If anyone wants to do this , please make sure you have the CORRECT TOOLS! Before you begin . Thanks for the video

@ivanuribe

10 ай бұрын

What are the tools? Share a link on where to get them if you can…. Please? 🙏

@JohnGlasscock

10 ай бұрын

Yes always

I haven't tried to take apart a game console beyond removing the top case since my old PS2 launch model design I had in 2009. That time the power ribbon got accidentally yanked out from the motherboard and even when buying a replacement power ribbon the console never turned on again. It would take forever for me to learn how to disassemble electronics such as game consoles confidently and put them back together

I managed to do it thanks to your vid and now my game is running like I just purchased it for the first. I did however have to keep going back to certain segments because it wasn't on screen long enough to see it and some of it was rushed but other than that this helped a lot.

I’ve been using an air compressor to avoid taking the PlayStation apart. So far so good. Ps5 used to overheat when playing games at 120fps. Blasted it from every hole and angle I could with a high psi air compressor and have been all good ever since. I’ve done it twice so far without issue. Just be sure to put something through the fan so it can’t spin.

@willharris2607

7 ай бұрын

Yup us car guys know what to do . Same way I did it. Forget taking the whole thing apart. 😊

@troybateson

7 ай бұрын

@@willharris2607 I’m a detailer. Same story here 😂

I had this issue with my PS5,I clean the fan and used a toothbrush the clean the dust off my power supply. After that I bought a vertical PS5 with cooling fans,and got 3 more cooling fans attached the back,so it's keeping the bottom cool and back side. A total of 5 cookings fans. No more problems.

Can you do a guide for the 1215A model? I know the screw layout is different and I would love to take it apart w/o disturbirbing the liquid metal as you did in this guide.

Damn that's some info in a short video! Thanks for this vid! :)

Once you done this it just gets easier. Done it once and was so worried about not getting it together but watching youtube videos and making photos of where my screws came out helped me out doing this process. And it payed off my Ps5 never overheated again

MVP!! My dude shortening what's supposed to be a 15 to 30 min long process to 5.

Or buy a magnetic duster with reusable heads, like the Flash one which is actually unbelievable in terms of the dust it attracts. Use that every couple days after use. And buy the vertical or horizontal dust cover depending on your consoles orientation, and it totally protects the console when not in use from everything.

@lakerskid2013

10 ай бұрын

I have the type of dust cover that is now $30 off of Amazon but was $20 at the time I purchased it and it has little holes to still keep the proper airflow while it’s running. They’ll give you some double sided adhesives (6 of them) to put on the console and once it’s securely on, you’re good to go.

Great video with details ! 👌🏻👌🏻

I also recommend gamers to clean their rooms (mop/vacuum/sweep/dust) and replace your house or apartment air filter to FPR 9 or above (or close to 2200). AND dont forget to replace it every few months or so.

Best KZread channel for everything P5 related!!! Thank you for creating these videos. It's much appreciated for those who may need some guidance. Keep up the good work!!!

@JohnGlasscock

10 ай бұрын

That means a lot, thank you

I would recommend taking a close up photo at each step.

I suffer with split personality. I am confident in completely disassembling a console and putting it back together again. However, most of the time I’m just an average user.. Hopefully next week I’ll remember how to put it back together again 😄🤞

just out of curiosity how much does it cost to send it in to clean?

Nice video. made it so easy for me to clean my console for now on ❤

Hi John! I gound this very helpful. However after taking apart my PS5 to see if there was dust buildup, I was surprised to find out it was perfectly clean. My question is, if it isn't the dust or fan area that is causing overheating and power off, might it be some of my settings that are just letting it run too high which causes the shut down? Thanks!

Hi there, thankyou very much for the video, now this is something I will not attempt on doing myself at all. Thankyou for the video by the way and have a great day today. 😊😊👍👍

So I've had my PS5 since launch day. I took my system apart just like you showed, but my system was not dusty. Ya there was a small amount, but I spent an hr doing this and didn't need to. Good video though

Thx For This Help Me So Much

I did this without taking the whole thing apart. I just removed the covers and removed the fan and took my air compressor with my long rubber air tire inflator and just stuck it in there and blew it out and mainly took it and pushed the air through the backside of the ps5 where the vents are. It looks brand new in there now.

I did this before, you should watch TronicsFix video on opening the ps5 for a more depth+tools links for doing what this video does. Be very careful, if you feel like you don't have the patience or time, do it another day, or don't open it as much. The one and only time I did, I forgot the blue ribbon cable that connects the external buttons to the actual console (on/off, eject) and my heart stopped. I only clean the first side vents and inside the area with the fan now.

@larsjohansen821

10 ай бұрын

Yes, TronicsFix is very good and detailed in his videos.

my ps5 has been shutting off by itself after only 30 mins use. guess i have no choice but to give this a try update: just cleaned it out last night (followed the video exactly and was much easier than I expected) and just played 2 hours of dead space remake perfectly fine. Couldn't get more than 20-30 mins before losing power prior to cleaning. thanks for the video!

If in doubt take pictures during disassembly! That way you have a reference during reassembly.

Great explanation!

I love the new models have a hole that gives access you can blast with air and vacuum it.

This is like playing pickup basketball & then having open heart surgery on the sidelines to lower your blood pressure lol

I have a question are repair services and Sony reliable meaning do they do a thorough cleaning like you when and other KZreadr when they fix consoles? Or if I want a good thorough clean I should learn and do it myself?

When I take of the metal heat sink plate do I have to put thermal paste after or is it safe to just put it back one when the previous paste that was on it

Very well done. Thank you.

I’ve done all of this and I maintain my ps5 very well making sure the fan is clean and clear of dust and still my ps5 still gets very hot almost to the state of overheating I’m running out of ideas and solutions

OMG JOHN YOU HAVE ONCE AGAIN SAVED ME AND MY MARRIAGE. MY PS5 WAS OVERHEATING EVERY DAY AND WAS GETTING IN THE WAY OF MY SEXUAL ESCAPADES WITH MY 7 WIVES. SINCE YOUR LAST VIDEO I ADDED ANOTHER WIFE JUST LIKE YOU HAVE ADDED ANOTHER INFORMATIVE VIDEO TO THIS CHANNEL WOE IS TO THE ONES WHO DO NOT WATCH THIS. NO MORE DUST AND OVERHEATING IN MY LIFE ANYMORE. THE ONLY OVERHEATING IN MY LIFE FROM NOW ON IS THANKFULLY IN THE BEDROOM.

This single handedly saved my day 1 ps5 i always only cleaned the fan and the inside the best i could with canned air but about 3 weeks ago my ps5 started to overheat to the point of only 5 minutes on the homescreen id get the temperature alert. I called sony after the 3rd time the alert popped up and since ive had my ps5 for about 2 ½ years the warranty was up and sony wanted $300 to send it in and look at it and at that point i said to myself id rather just spend the extra $246 to buy a brand new one since theyre available but this video appeared to me today and though i was not confident to do this i did and cleaning the power brick stopped the alerts and my ps5 is going strong once again thanks for the video!

Without first watching the video to the end. Surely once you've removed the fan you can get some flexible hoover attachment in there?

You do not got to take the fan out of old just use compressed air on the power supply through the fan whole when u take the fan out

I lay mine horizontally. Ive cleaned it twice in a year and it really hasn't been very dirty.

@JohnGlasscock

10 ай бұрын

That's good!

Question, what are possible symptoms of the PSU not putting out enough power? Trying to diagnose some issues. (Mine is clean as far as I can tell). Also any issues opening up the PSU itself?

I did this with my ps3 after 10 years. There was a dead bug in there but hardly any dust surprisingly. I use a dust cover for the ps5 when I'm not playing.

Great video!

I think in non smoking room as mine clearing fan once each 6 months will do the job together with clearing outside dust that collects on surface for like every 10 days . I play about 3 hours each day at least and if I intend to play again I make 2 hours pause and completely turn off console. Even after 3 hours I can barely feel warmth on ps5 when I touch it with hand. Also i dont ever hear fan working unlike with ps4 which had habbit to go crazy with games like God of war and similar. Also clearing fan of ps5 is so much easier compared to ps4 ( slim ) and God forbid ps3 where I had to completely take apart entire console ( ps3 slim ) . I think ps5 is really friendly console regarding all this.

You are the man! Great Video!

I’ve had my PS5 since launch day, I’ve never cleaned it and it works perfectly. I checked it out when I upgraded the nvme and it hardly looked like any dust was in there. So many people will destroy their consoles doing this.

question - what’s the internal component attached via cables @ 1:34 ? i don’t have this in my system, there aren’t even cable connectors on the motherboard for it

For most people who buy consoles, this is too much work and risk just to clean the powersupply, one wrong move can lead to tearing a ribbon cable, or breaking a fan header

I absolutely do not trust myself to do all of this without completely breaking my console. Think I'll just stick to hoovering without disassembling

Hi just want to say thank you i dissembled my ps5 now it can never turn on again , thank you very much 🙂

I even don't have a PS5 but but I got so much stressed one minute into the video that I know I'll give it to Sony to get it cleaned once I own a P5. 😂

So I did this and had success but what about the thermal paste between the motherboard and metal plane that coats the opponents should that be reapplied

Jesus Christ. I’ve opened up & taken apart (only what was necessary) my Xbox 360 and PS4 to clean them thoroughly, and been fortunate to have no problems afterwards. However, THIS, taking apart my PS5 completely to clean the air vents on the opposite side of the console is another level. Truthfully, I would be content taking care of my PS5 electronically (i.e system settings), on the outside (dusting/brushing/pressurized air), and even opening it just to remove & clean the fan. I’ve heard of design flaws, but this is asking too much if you want to keep your console in good condition. I would only go this far if I absolutely had to.

Remember that doing this could void your warranty so only do it if your ok with that