Order your Anycubic Mono M5s Pro today: shrsl.com/4dpud Anycubic Tough Resin Ultra: shrsl.com/4dnlg

@drjekyll4466

4 ай бұрын

@MikeConstantinou

3 ай бұрын

Anycubic Tough Resin Ultra ordered - thank you!

@IronLion219

3 ай бұрын

what about large builds that should be hollow?

An hour long video explaining 3D-printing from one of the channels I’ve best seen explain 3D-printing, just as I’m looking to take the plunge. I suspect this video will become a holy grail to a lot of new printers on KZread I can’t not comment on that for the algorithm, can I? Thank you, this is incredible

@tloh6643

3 ай бұрын

This is my holy grail for printing!!! I am a first-time user of a resin printer and this video has set me up for success! Thank you so much for this in-depth guide and it has been very detailed! Also having the same printer made this so much more easy!

Here’s your engagement comment. You’ve gotten me into resin printing and I love the stuff you do. Wish you luck with KZread.

Discovered your channel like a week ago currently in the process of upgrading to whatever bamboo puts out next February (hopefully fingers crossed). Now, because of you, I'm planning on picking up a GKTwo and going down the resin rabbit hole and learning how to paint miniatures as it looks like a lot of fun. Hopefully in a few months Ill be learning how to paint on some Turnip28 minis. This video for me was perfect timing couldn't have asked for a better coincidence. Hopefully KZread starts spinning up the algorithm for you, your art is everything the algorithm loves so fingers crossed.

@JeremyTolbert

5 ай бұрын

You won't regret the GKTwo. I've had a few different printers and it's been my favorite so far.

Buying a flex plate for my printer was probably the best thing I've ever done for this hobby. It's such a game changer.

@brunoduchesne6663

3 ай бұрын

Ho yes. Big game changer😊

@brianparamore6928

2 ай бұрын

Ordering my first printer and accessories this week. Any other things you recommend the change the game I can get out the gate?

I got a mars 4 max just before Christmas using sunlu plant based resin and its been absolutely flawless, really surprised at how well it's gone. Much of this is due to watching videos like yours helping get the setup pretty much right out of the box. Plug and play I'd give it an 8/10

I started resin and fdm printing at about the same time. I immediately found resin printing to be much easier. My 3 main milestone points of my "journey" were: Getting over the seemingly ubiquitous newbie view that you need to chase the minimum exposure time you can possibly get away with because your detail is going to suffer if you dare go anything over this, I've dialled in and had a blast just printing out minis. Realising how critical temperature is (far more, imo, than exposure) to successful printing and sorting out a heated enclosure. Finding Sunlu ABS which is by far the most resilient resin for minis I've tried (ok with the exception of eSun hard tough, but that's twice the cost). I found I quickly fell in to a routine for post processing that makes it pretty straight forward. Routine maintenance is... not that routine anymore now I treat my fep like a catholic treats their private parts (don't touch it... don't even look at it as much as possible). I agree actual printing is not a hobby, but I do think there is some amount of learning to be done to get there.

For me it became a hobby as it lead me down the rabbit hole of making my own terrain and miniatures.

Absolutely amazing content! I'll come back to this video again and again! Really great job and what the community needed.

I got my GK Two like 2 weeks ago, and I got my Bambu P1S 2 days later. I've found it all to be really easy and straightforward if you simply just want to find cool stuff and print it out. There is so much more depth if you want it, but it seems like it's really not necessary if you're not that kind of person. Personally I'm a bit of a deep diver and when I get interested in a new hobby by the time I go to get something I've watched so much content and so many guides and tutorials and tips and tricks etc that I go to the store and tell the worker something like "I'm new, this is my first X" and then within a minute I realize I actually know more than they do about it. Within 5 min I'm somehow explaining stuff to them haha. Idk, I'm technical and logical minded.. all of the aspects of the deeper side of 3d printing are right up my alley. I love tweaking and modifying and testing and trying to improve things and make them better than the last time. I gotta be honest though, I got into this for resin printing but once I got the P1S I realized how huge of a gap there is between resin and FDM. You can tell that all of the resin printer manufacturers really aren't sure what to do next to improve resin printing. We've hit diminishing returns on screen resolution and the next big thing for resin printing really isn't obvious I don't think. Manufacturers are doing stuff like adding the heaters and carbon filters and what not but I feel like they're all kind of just flailing because they don't really know what to do next or what we want. For FDM it seems like the bambu machines came out and now there is a very clear benchmark. Stuff like their AMS with RFID in the spools where you just put a roll in and the AMS reads the RFID and just auto applies the best settings for that material in your slicer. Like I said, I'm a deep diver, but having that starting point or if I just want to print something quickly having the capability to just put a spool in my AMS, slice a plate, and hit print and having it just work is a God send. I love the depth and breadth of options, but I love that they are just that... Options. REQUIRED complexity is often tedious IMO, but easy use as a baseline with optional complexity for those that want it is what they should be striving for and I think Bambu nailed it. And yes I know, it's nowhere near as deep as an open source system but you're also trading away a significant portion of your user experience and ease of use for that. We need a new resin printer to come out that has some feature that none of us even knew we wanted or needed, but once we've tried it we can't ever go back. That is the kind of stuff that pushes industries forward. I'm guessing for the next year or 2 that is going to be better implementation of heaters and filters (not that hard to improve currently since most of them just slapped aux units into their machines without thought just to say they have it), maybe some kind of auto bed leveling that makes manual leveling a thing of the past, improvements to the resin itself to make it less toxic and easier/cleaner/safer to work with, better wireless/app integration so we can more easily and quickly send and start prints, and maybe some kind of build camera to check print progress remotely. Maybe with that camera they can do stuff like the X1C and use some AI algo to monitor prints and auto cancel failures. Obviously that will be way harder with resin since your print is submerged in resin for the first 30+ minutes at least. Who knows, maybe there is a better way to do this all together. I'm excited to continue learning though and I'm here for the ride to see where it all goes! (Your videos have been super helpful and informative btw, thank you)

I recently got into printing after christmas and I kept looking for a coprehensive video like this! Killer work and your videos inspired me to make the leap to start!

I’ve had an anycubic mono x for about a year and it has been churning along nicely. I’ve been following your pre print checks for a few months and it’s made a difference in many prints. Keep it up bud. I’m liking the more free form audio. Makes it feel like your shooting the shot with your buddy

Already 3D print but had this going in the background. Good video for starters and I still picked up a few tips.

Finished the video. Wow it is a lot of info. Well done! This is definitely a resource to come back to again and again

Thank you for covering the settings on all the different slicers! It's nice not having to jump through 6 different videos to see that.

This video came out at the perfect time for me! After the holiday backorder, I finally received my UniFormation GKTwo yesterday. This video is the thing I was just telling myself I should find online as there isn't a comprehensive video (that I've found) on KZread that explains in depth the workflow to 3D printing from set up to printing. Thank you so much for giving me the information I was hoping to find and then some that I didn't know to be aware of. So excited for my journey into 3D printing after going through a large part of your online catalogue.

This was an awesome tutorial on resin printing. Like an actual tutorial showing all the steps and possible issues. Amazing work!

I've been watching this video over and over in anticipation. And i finally made the move and bought a Saturn 3. Huge thanks for all the tips in this video 🤘

A really great get starter video. Should be essential viewing for all new resin printer owners. Also perfect timing for me as I've moved my printer, had a couple of fails, so wanted to re level and check my settings were correct. Very helpful to remind me what to do, picked it dome tips, and cleared up nagging doubts. Thanks.

Amazing content, please keep up with this serie!

That was a great class! Thank you very much! Good job 👍🏾

Thank you, after finding some tutorials here and there for starting 3d printing I've found you through this video. I've learned a lot thanks to you! Gonna check the supporting guide

This is most defiantly the highest quality masterpiece of a video that I have seen on KZread EVER! The amount of detail and care put into this is immense, the fact that you go through multiple different software and multiple printers is amazing. This is the best way to get into the hobby, I felt so comfortable doing my first print after this. Thank you so much!

You're a bloody legend, going start to finish explaining pretty much every step applicable (with bookmarks no less) is a massive undertaking :)

Suspect I'll be coming back to this one time and time again, thanks for putting in the effort to put this video together.

EDIT: just past the 1hour mark and this video is full of great info for pretty much any level of hobbyist. I especially loved the section around the 1:11:00 mark where you discuss tips for how to actually arrange the build plate. So many videos focus on orientation and completely gloss over strategies to put the most models on a plate while maintaining good printing practices like FEP health and easy post processing. Thank you! This is perfect for my brother who just got a new printer. I know I can give him the key details but this is a perfect video to share

Awesome. Gonna bookmark this. Thanks!

One of the best videos on resin printing I've watched, thanks a lot!

this is a long and great detailed video, thanks for putting your heart and soul in this.

Can’t wait for part 2. Thanks for all you do.

Really enjoy all your video's, looking forward to your different video formats you have been talking about and really hope your Patreon takes off! You deserve it!

Thanks for the fun contest! My daughters and I really enjoyed participating and watching all the cool designs come in. Thank you for taking the time to walk through them all. It was great to get your thoughts on them!

Saturn 3 ultra. Hooking up was 5 minutes. Wifi? 5 minutes. Zeroing the plate was 5 minutes. I printed 3 Cones of calibration to dial in exposure time. took me about 10 minutes to get the stl through lychee slicer, 1 minute to upload it to my Saturn 3 ultra, 50 minutes to print. Altogether 3:30 hours to dial it in and understand. Been happily printing perfect pre-supported minis since. Cure and dry is super simple. My bigger issue was I could only set it up in my living room. Bought a walk-in hydroponics tent 4x4 feet, an in-line fan + hoses, and one of those cheap airco window adapter kits, propper half face mask with propper rated filters, nitril gloves and for laughs a lab coat. I do all my resin handling inside the test until it's clean and cured. Keep everything contained in there. Ease of use? 10/10. Safety? 8/10.

@marioman4351

3 ай бұрын

How is this setup doing a month later? Have the same printer in the living room with a grow tent + ventilation all set up yesterday and wondering if you've felt any ill effects since posting this comment

@nohkra

3 ай бұрын

That sounds like a pretty nice setup if you're missing an extra "printing room", everything but family-compatible though 😂

@alexanderalfonsson5874

Ай бұрын

The Lab Coat was a brilliant touch. XD Heinz would approve.

This video is amazing! I've been printing for a couple of years now and this still gave me a few little tricks. When i was just starting i would have absolutely benefited from this.

Keep up the good work, thanks for the videos!

Sure man, i'll feed the algorithm. Started printing in November 23, so 2 months ago. I'm in the UK, so had a bit of a blip with failures due to low temperature, but even with that I've not found the learning curve too bad. Not quite plug and play, but probably comparable to getting an airbrush. Certainly not a hobby by itself, but with some depth if you get into it. I've had to learn some things, but I've enjoyed doing it and it's been well worth my time. And thanks for all the super helpful info. Channels like this have made it way easier to get up to speed and you've definitely saved me some headaches and nightmares

Bro, awesome content! I’ve been printing with resin since og anycubic photon came out. Still learnt a lot!

This is awesomely thorough. Thank you!

just getting into 3d printing and this video answered so many questions in a really entertaining fashion! instant follow

I'm working through some pain printing in a cold garage, these tips are gold!

Love your channel brotha keep up the good work!🍻

I have been 3D printing for almost a year now. I spent about 3 hours setting up my printer one evening and i have maybe spent 2 hours since then cleaning and calibrating my printer. I have printed almost an entire army and a half. It has been smooth sailing. It's so close to plug´n´play as it can be. I have an Elegoo Mars 3 pro, and i love it. Great videos - keep them comming

Fantastic run down, thank you.

Thaaaank you so so much! I've just purchased my first 3d printer and I'm sure I'm going to find this invaluable. Can't wait to watch more of your videos.

Thanks for this comprehensive guide, it helped me a lot when configuring my first printer and I still come back here when troubleshooting. Keep up the good work 👏

Thanks. Totally inexperienced and you've enlightened me enough I'm willing to give it a try.

Dude, this literally could not have come out at a better time.

This is a fantastic guide for the 'new to printing' like me :D just got a elegoo mars 4 max as my first printer. I really appreciate the time and effort you have taken to break every step down and fully explained the whys and why nots on each element of 3d printing setups. Personally i think this is the best guide out there for first time printing!

Coming from an FDM printer (Ender 3), this is a whole new skill to learn. New programs, different calibrations to make, etc. Thanks in advance for the advice.

Jesus mate, this is the best 3d printing video I've ever come across! Thanks very much for tips!

I've been moderately successful printing to date, this video has filled the gaps, answered a load of my outstanding questions so thank you.

This video is very good. It would have been better a year ago when I was so disgusted with print failure it took almost a year to get back into printing ....

Appreciate the content you're putting out.

Great Video - really useful information.

If I could like this video 100 times, I absolutely would! In lieu of that I'm going to be directing anyone and everyone I know who's involved in resin printing to this video. So much fantastic info that I didn't know I needed! Thank you!

Just found your channel, I'm thinking of getting into printing and you have a great channel I'm glad to see you're going to give this a real go you can do it.

This is hands, down, the very best beginner resource for 3D resin printing. Loved the detail and your methodical approach. Liked and subscribed 🎉

this is by far the most helpfull video I've seen on the subject, thnak you man!

I popped this on to listen in the background while supporting and slicing files, and hoo boy - when you were talking about the settings on your Wash+Cure station I was *staring* at that LED next to "WASH" just waiting for the inevitable... I haven't had such a good belly laugh in a long time! I'm so glad you kept that in the video. I... may have done that once or twice... XD

Hello and thank you for the guide!

thank you for this! just recently got a cheap printer and having a good luck around at info to make notes of!

Great video just starting my 3d journey. Saturn 3 ultra

This is such an amazing video. There’s so much misinformation and bull in 3D printing and everything here is mostly on point. Amazing work!

Love the content waiting for part 2

Quite literally the best title for a video. Thanks for the info.

Awesome video man🖤

Resin 3d printing has been a 7/10 on a plug and play for me. I've been printing for a while and done everything from mounting magnetic build plates, swapping out my FEP, and changing resin a ton of times. KZread and Reddit have solved any issues I've had with simple searches and without any need to ask for specific help I use the space of 2 IKEA 14 by 14 in lack tables. The setup lives in my living room with a ceiling fan and I mostly print in good weather when I can open a window. It's a 3/10 on the mess factor which is unfortunate but not the end of the world with silicone mats and newsprint and gloves.

The handheld camera and diligent editing made the non-script a non-issue, congratulations :D

Hi. Thank you SO MUCH for making this video. It was, in all respects, an epic production. I designed and built my own FDM 3D printers and have just decided to take the plunge, so to speak, into resin. I have never owned a resin printer so I am a rank newbie at it. Your video has told me pretty much everything I will need to know in just one video. I cannot thank you enough.

This was great!

This is great I am really rooting for you and making his work

A great video, so informative and clear. Answered a lot of the questions I had about settings etc. Thank you. Subscribed )O(

Thanks for a really good overview! Will you also be doing something about painting miniatures?

I love this channel, it's fantastic.

I just got my first printer today. Your videos are a god send

as a tip for cleaning, I've got these plastic trays like the kind they use in cafeterias. I use those as my work space, my 3D printer is on one in case anything leaks out, etc... they're plastic, they clean easily and they're not too expensive to replace if they're screwed being cleaning.

THIS IS ABSOULUTLEY AMAZING VIDEO I AM ABSOULUTLEY SO THANKFUL!!!

I bought my first 3d printer back in 2012 or so for an exorbitant amount of money. Really enjoyed it, until it came time to clean the bed and realign everything. Then troubleshooting settings for what type of material and brand.. the list kept going and I printed less and less. Then a few years ago I bought a cheaper elegoo mars and wow. Resin printing with this just worked.. minor issues with exposure times depending on brand of material but wow. I have been recommending resin printers to everyone and my old one sits in a corner until I could be bothered to tighten belts and realign everything. Separate note, your channel has been great. I have used your recommendations on who to get models from and even for purchases. I wish you luck making a go of this after your recent life changes.

Bro your channel kicks ass just wanted to let ya know!

You posted this video like you knew I was just getting into this.

Yeah I didn't buy a 3d printer for ages because I thought it was too complex you videos were the thing that changed my mind

This is the greatest tool I’ve watched thanks man!

@TimProviseNZ

2 ай бұрын

I meant that as the video being a tool haha not you man! Amazing resource

Very good video, one of the more useful ones for mini oriented printers. Love the rest of your shit too!

Liked and subbed for the effort and great video.

AYYY!!!! Thank you for the shoutout for the Cones! :D :D Im so happy to see you're still using it!

@OnceinaSixSide

5 ай бұрын

No worries! Hope my teaching for it doesn't cause you too many headaches over on your server haha

Just picked up at anycubic m3, and have successfully printed 5 things, 2 miniatures for D&D , and I have found it way easier than I expected. Wish I would have got into it much sooner!

Great video, been printing a while myself and its always good to get back to basics and pick up some tips and tricks! One thing that might be worth mentioning for new starters in the next part is how to dispose of used alcohol?

I'm not even finished with this video. I have had my printer for couple of weeks and have had some issues right out the gate. Don't get me wrong I learned a lot from other content creators before I started but I still wasn't really prepared for the problems. Once in a Six goes over the things that no one really talks about. Explains it like I'm 5 because I don't have the time to learn a new instrument I just want some new miniatures for my game. THANK YOU for sharing all the things you have mentioned thus far. I just needed to comment while I have a moment to process my thoughts. Going over the key exposure settings and understanding how to calibrate the printer along with Resin temperature in this video is probably some of the best I have seen yet. Only thing I can say from my own experience is adding a magnetic plate was well worth all the scraping trouble. Thanks again Once in a Six, i'll be following for my tips as I go through learning my new favorite hobby!!!

@jasongehrke8152

Ай бұрын

I only regret that I can't give you enough thumbs up for part 1!!

you are a beacon in the dark. Guiding lost souls to redemption and knowledge. Your content is gold and if I weren't a poverty stricken student I would donate to you

One thing I'd like to see is a list of concerns and things to be aware of when you own pets and you get into 3d printing. Things to be careful of, ect.

Very informative video. I was looking at your video list for Part 2 but could not find one. Have you done that yet?

dude this was absolutely worth your and our time. boom

The most simply explained and comprehensive “starter guide”. I’m looking to get into resin printing and have no idea !! Watched a few other bits of other users content. Still don’t get it. Watched this …. Now I got it !!!

Bro I subscribed the SECOND he showed the desk pile and with the ughhhhh. 😂 biggest reality of it

I'll be honest . . . I will probably never jump into resin printing due to the potential mess that I could nay! will, create with resin, the odors/fumes combined with my lack of ventilation options (in my particular space and climate). HOWEVER, I'll say this video was fantastic just walking through and showing how the basics of the whole process works. I really didn't get how things practically worked (and some of your best practices of handling things). I just wanted to let you know this was some really good work and thank you.

Fantastic video!

This is a complete guide you provided that can help a lot of people. However, to improve the method for removal of printed parts from the build plate, once can use a razor sharp blade, it won't damage the printed parts. I usually print without any support, that is how important this method of not damaging any part of the printed object. All that is needed to start removing the printed part is to insert some air between the bottom layer and the build plate, a sharp edge tool can help more than the provided blunt edge tool by the printer manufacturer. It is not by chance it is challenging removing printed parts from the build plate using the provided tool, it is very thick.

58:08 just to point out, anycubic has it set correct. the reason it's confusing is because while you're expecting the light to show up on the screen in the spot you chose in the slicer, you're placing items on the build plate in the slicer, not on the screen. so mirror it horizontally and boom, there it is, in the lower right. we're basically worm's eye viewing build plates lmao. literally just looking at it from a different point of view. otherwise, been a good video so far.

Love the leveling check square file

I’ve never gotten a resin printer because I was always afraid of all the print fails I’ve seen but this video has me really wanting to try using one now, definitely a lot less scared of printing